|
| 1 | M & L for preparation of old plastered surface of wall, ceiling complete removal of existing treatment and washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and directed. |
| 2 | M&L applying 1mm thick wall care putty on walls and after drying the surfaces sand the putty smooth before painting complete all as specified and directed. |
| 3 | M&L applying 1mm thick wall care putty on ceilings and after drying the surfaces sand the putty smooth before painting complete all as specified and directed. |
| 4 | M & L for applying two coat of oil bound distemper on ceiling including one coat of primer complete all as specified & directed by Engr-in-Charge |
| 5 | M & L for preparation of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, alkali & fungal reistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon aditives at 1.43 ltr/10sqm over and including priming coat of exterior primer applied at 0.90ltr/10sqm all as specified and directed by Engineer-in-Charge. |
| 6 | M & L for preparation of walls and applying one coat of 100% premium acrylic emulsion paint having VOC less than 25gm/ltr and UV resistance as per IS 15489:2004, alkali & fungal reistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon aditives at 1.43 ltr/20sqm all as specified and directed by Engineer-in-Charge. |
| 7 | M & L for preparation of old surface and applying two coats of cement based paint complete all as specified & directed by Engineer-in-Charge. |
| 8 | M&L for preparation of old surface and applying one coat of cement based paint complete all as specified and as directed by Engr-in-Charge. |
| 9 | M & L for preparation of old plastered surface and applying two coats of Oil bounded distemper on walls complete all as specified and directed by Engineer-in-Charge. |
| 10 | M & L for preparation of old surface and applying one coat of Oil bound distemper on walls over a coat of primer complete all as specified and as directed by Engr-in-Charge. |
| 11 | M & L for preparation of old ceiling surface and applying one coat of oil bound distemper complete all as specified & directed by Engr-in-Charge |
| 12 | M & L for preparation of old plastered surface of walls including cornices and apply one coat of white wash complete all as specified and as directed by Engr-in-Charge. |
| 13 | M&L for preparation of old surfaces of ceiling including cornices and apply one coat of white wash complete all as specified and directed by Engineer-in-Charge. |
| 14 | M & L for preparation of old wooden surface exceeding 10Cm width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge. |
| 15 | M & L for preparation of old steel surface exceeding 10Cm width or girth and apply one coat of synthatic enamel paint complete all as specified and as directed by Engr-in-Charge. |
| 16 | Dismantling floor, hearth or wall tilling including cement mortar bedding(but not backing), and rubbish off premises etc complete all as specified and directed by Eng-in-Charge. |
| 17 | M & L for vitrified ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 18 | M & L for vitrified ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles not exc 0.36 sqm in skerting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in cement mortar 1:3 complete all as specified and directed. |
| 19 | M & L coloured non-skid ceramic tiles joint free ceramic tiles 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed by Eng-in-Charge. |
| 20 | M&L coloured glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed by Eng-in-Charge. |
| 21 | Demolition of brick work built in cement mortar including all quoions, arches pillar etc complete all as specified and directed. |
| 22 | M&L brick work with sub class \\"B\\" old size bricks, straight or curved on plan exec 6m mean radius built in CM 1:6 complete all as specified and directed by the Engineer-in-Charge |
| 23 | Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc |
| 24 | M & L for rendering 10 mm thick on fair face of brick walls or concrete surface in CM 1:6 complete finished even and smooth without using extra cement all as specified and directed. |
| 25 | M & L for rendering 15 mm thick on fair face of brick walls or concrete surface in CM 1:4 complete finished even and smooth without using extra cement all as specified and directed. |
| 26 | M&L preparation of new surface and applying two coats of cement based paint over a coat of primer complete all as specified and as directed by Engr-in-Charge |
| 27 | M & L for preparation of new surface and applying two coats of Oil bound distemper on walls over a coat of primer complete all as specified and as directed by Engr-in-Charge. |
| 28 | S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed with wooden bead to wooden frame of requered size with nails complete all as specified and directed. |
| 29 | Hacking out old broken glass from metal frame including punching or drilling out old glazing complete |
| 30 | M & L for 4mm thick plain sheet glass ordinary quality including glazing with putty area area n.exc 0.5 Sqm in each pane |
| 31 | S&F in repair stainless steel curtain rod 25 mm dia incl. brackets and curtain rod holders of suitable size at ends etc complete all as specified and directed |
| 32 | S&F in repairs Vitreous china wash down water closet pan (pedestal pattern) white colour excluding fixing bolts, flushing cistern & flush pipe) but including seat cover,Jet spray white colour complete all as specified and directed by Engr - in - charge. |
| 33 | S & F in repairs white EWC washdown one piece of size 670 x 360 x 725mm with 'S' trap or 'P' trap and PP soft close seat cover Make Cera or equivalent |
| 34 | S & F repairs PVC valveless, syphonic action type, flushing cistern, low level, white colour capacity 10 liters with inlet and outlet, ball valve, handle including cast iron brackets & 32 mm bore PVC flush pipes & PVC connection pipe, compete all as specified and directed. |
| 35 | S&F in repair PVC waste pipe 32/40mm dia 610mm long suitable for WHB or Sinks etc complete all as specified and directed |
| 36 | Taking down and S & F rotational moulded polethelene water storage tanks in 500 litres capasity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I complete, ISI marked, all as specified and directed. |
| 37 | Ditto all as per above item but 1000 litres capacity. |
| 38 | S & F in repairs ball brass valves, high pressure, with polythelne float and fly nut in 20mm bore complete all as specified and directed. |
| 39 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (including Cleaning repairing,making date of cleaning etc complete all as specified. |
| 40 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each |
| 41 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each |
| 42 | S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed . |
| 43 | S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – I 2009 and as directed by Engineer-in-Charge |
| 44 | S&F Aluminum anodised barrel tower bolt of extruded section and fixed 125 mm long complete all as specified and directed . . |
| 45 | S&F 150mm size extruded aluminium alloy handles, fabricated type,anodised complete all as specified and directed . . |
| 46 | S&F Butt hinges, heavy weight, cold rolled mild steel, and fixed 100mm long complete all as specified and directed . |
| 47 | S & F in repairs 15mm CP pillar cock. Make Cera or equivalent with Cat Part No F1018101 |
| 48 | S & F in repairs 15mm CP single lever concealed diverter system consisting of exposed part (lever, tip ton, knob, flange) & concealed part (cartridge with button assembly, cartridge sleeve). Make Cera or equivalent with Exposed Part Cat Part No F1018701 & Concealed Part Cat Part No F4010101) |
| 49 | S & F in repairs 15mm CP sink cock with 150mm (6'\\") long swivel spout & wall flange. Make Cera or equivalent with Cat Part No F1018251 |
| 50 | S & F in repairs 15mm CP angle cock with wall flange. Make Cera or equivalent with Cat Part No F1018201 |
| 51 | S & F in repairs 15mm CP 2 way angle cock with wall flange. Make Cera or equivalent with Cat Part No F1018211 |
| 52 | S & F in repairs 15mm CP 2 way bib cock with single handle & wall flange. Make Cera or equivalent with Cat Part No F1018151 |
| 53 | S & F in repairs overhead rain shower SS 150mm dia (6\\"). Cera or equivalent with Cat Part No F7010211SS |
| 54 | S & F in repairs 15mm dia overhead shower arm SS 200mm (8\\") with flange. Cera or equivalent with Cat Part No F7040102 |
| 55 | S & F in repairs 15mm health faucet ABS body with 1 Mtr SS braided connection pipe. Cera or equivalent with Cat Part No F8030105AB |
| 56 | S & F in repairs towel rack 600mm (24\\"). Cera or equivalent with Cat Part No F5007101 |
| 57 | S & F in repairs towel rail 600mm (24\\"). Cera or equivalent with Cat Part No F5007103 |
| 58 | S & F in repairs towel ring. Cera or equivalent with Cat Part No F5007105 |
| 59 | S & F in repairs toilet paper holder. Cera or equivalent with Cat Part No F5007109 |
| 60 | S & F in repairs toilet paper holder with flap guard. Cera or equivalent with Cat Part No F5007110 |
| 61 | S & F in repairs tumbler holder. Cera or equivalent with Cat Part No F5007107 |
| 62 | S & F in repairs corner glass shelf (large) 300 x 300mm (12\\" x 12\\"). Cera or equivalent with Cat Part No F5005103 |
| 63 | S & F in repairs corner glass shelf with 2 racks. Cera or equivalent with Cat Part No F5005201 |
| 64 | S & F in repairs 15mm CP bib cock with nozzle and flange. Make Prayag or equivalent with Cat Part No 7305 |
| 65 | S & F in repairs 15mm CP bib cock with flange. Make Prayag or equivalent with Cat Part No 7306 |
| 66 | S & F in repairs 15mm PTMT bib cock complete all as specified and directed. |
| 67 | S & F in repairs concelated stop cock 15mm with flange. Make Prayag or equivalent with Cat Part No 7318 |
| 68 | S & F in repairs concelated stop cock 20mm with flange. Make Prayag or equivalent with Cat Part No 7320 |
| 69 | S & F in repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 70 | S & F in repair grating doom 100mm dia of PTMT of any type (Min weight 25 gms) |
| 71 | S & F in repair PVC connection pipe 15mm size with PTMT nuts of length 600mm |
| 72 | S & F in repair PVC connection pipe 15mm size with PTMT nuts of length 750mm |
| 73 | S&F in replacement 15mm cp single liver basin mixer with 450mm braided connection pipe (without popup) with bend pipe & fittings all as directed and specified by Engr-in-Charge. |
| 74 | Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ.(ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri Please Enable Macros to View BoQ information |
