|
| 1 | Dismantling cement concrete or brick or granolithic floors including base concrete stacking of dismantled materials as directed byEngineer-In-Charge within a distance of 60 meters (200 feet). Pwd si no. 697 |
| 2 | Dismantling doors and windows including chowkhats but excluding hold fasts and including stacking of materials as directed byEngineer-In-Charge within a distance of 60 meters (200 feet) Pwd si no. 705 |
| 3 | Dismantling tile work in walls, floors and roofs laid in cement mortar including stacking seviceable and disposal of unseviceable materialswithin a lead of 50 mtr. as per direction of Engineer-in-Charge. Pwd si no. 21 new |
| 4 | Providing and laying cement concrete in 3:1.5:1 of not less than strength of M-15 stone Ballast (20mm nominal size) approved coarse sand and cement, curing complete, including cost of form work. In Foundation and floors. S.I.No. 4.1.2 |
| 5 | Supply and fixing of 4cm. Thick C.P. teak wood door and window shutters with panels of heavy Quality galvanized iron wire gauge 2.5mm or 2mm or 1.5mm mesh or any other size, with necessary beading, including supply and fixing of wooden cleats, stoppers and including fixing & adjustment of hinges, bolts, locks handles, spring and or other fitting but excluding their supply and including painting two coat of blackJapan on all iron fittings if necessary, Fittings with necessary screws to be supplied by the department. Pwd si no. 450 |
| 6 | Steel wok in built up tubular (round,square or rectangular hollow tubes etc.) truses etc. including cutting. Hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (Hot finised welded type tubes. as DSR no. 10.16.1 |
| 7 | Providing and laying vitrified floor tiles in differentsizes with water absorption less than 0.08% andconforming to IS: 15622, of approved make, in allcolours and shades, laid on 20mm thick cementmortar 1:4 (1 cement : 4 coarse sand), jointing withgrey cement slurry @ 3.3 kg/ sqm including groutingthe joints with white cement and matching pigmentsetc., with lean concrete complete.. DSR no.11.41.2 ii |
| 8 | Providing and laying vitrified floor tiles in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., with lean concrete complete.. DSR no.11.41.4 ii |
| 9 | Providing and fixing 18mm thick Granite (gang saw cut) mirror polished premoulded and prepolished machine cut for kitchen platform similor location of required size approved shade, colour laid over 20 mm thick base cement mortar 1:4 cement coarse sand etc complete at all level (SOR si no. 8b ch-14) |
| 10 | Painting on Steel/G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution..as DSR no. 13.53.1 |
| 11 | Providing and fixing in pvc wall panneling and ceiling work i/c supply of all material and labour with installation complete |
| 12 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per sa si no.11 new ii 5.5 mm thick |
| 13 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required all as per s.i.no. 2ch-24 |
| 14 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. 15 mm nominal bore as DSR no. 18.49.1 |
| 15 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: as DSR no. 17.7.4 d ch 22 |
| 16 | Providing and fixing white vitreous china flatback or wall corner type lipped front urinalbasin of 430×260×350 mm or 340×410×265mm sizes respectively. as DSR no. 17.23 d ch 22 |
| 17 | PVC connection pipe 450 mm long 15 mm dia as per s.i no.138 ch-21 |
| 18 | CP brass waste jali as per s.i no.136b ch-21 |
| 19 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 as DSR no. 18.53.1 |
| 20 | P/F CPVC pipes having thermal stability for hot & cold water supply I/C jointing of pipe and cutting chases and making good as per s.i.no.8b ch-23 |
| 21 | P/F CPVC pipes having thermal stability for hot & cold water supply as per s.i.no.8 C ch-23 Internal work |
| 22 | Brass ball cock complete with ball and rod as per s.i no.128 ch-21 |
| 23 | P/F signboard of black granite plate in Brick masonary in Cement mortar i/c all complete Please Enable Macros to View BoQ information |
