|
| 1 | Earth work in excavation of foundation trenches in all type of soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lifts with sundries & T&P required for the work complete including cost of all labour,labour cess,T&P,sundries etc. as directed by the Engineer in charge. |
| 2 | Supplying & filling of foundation with course sand well watered and rammed including cost, cost of all labour, carriage, royalty complete in all respect as per specification and direction of the Engineer-in-Charge. |
| 3 | Providing cement concrete of proportion (1:3:6) in foundation and floors using 4cm (3/2\\") size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting lowering and laying concrete in layers not exceeding 15cm (6\\") thick to the required level ramming, watering & Curing etc. complete including cost & conveyance of all materials with all taxes & royalties and all labour with T&P required for the work with cess etc, complete including dewatering if required as per direction of Engineer In Charge. |
| 4 | Providing Plain Cement Concrete of proportion (1:2:4) using 12 mm (1/2\\") size clean hard black crusher broken granite chips of approved quality and from approved quarry including hoisting lowering and laying concrete in layers not exceeding 15cm (6\\") thick to the required level ramming, watering & Curing etc. complete including cost & conveyance of all materials with all taxes & royalties and all labour with T&P required for the work with cess etc, with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount and including hire & running charges of machineries T&P required for the work including supplying & working of pumps and cess as per the specifiction and direction of Engineer-in- charge |
| 5 | Fly ash brick masonary in Cement Mortar (1:6) in Foundation using Fly ash brick of 25 cm X 12 cm X 8 cm size having a crushing strength not less than 75kg per Sq.cm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering & curbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. with additional charges as decieded by the District Administration, DMF & EMF @15% on royality amount and including hire & running charges of machineries T&P required for the work including supplying & working of pumps and cess as per the specifiction and direction of Engineer-in- charge |
| 6 | Fly ash brick masonary in Cement Mortar (1:6) in Superstructure using Fly ash brick of 25 cm X 12 cm X 8 cm size having a crushing strength not less than 75kg per Sq.cm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering & curbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materials & labour required for the work with all taxes & royalties with all T&P & cess etc, complete in all respect as per the direction of Engineer-in-charge. |
| 7 | RCC work of grade M-20 having a minimum compressive strength in work text of 200Kg/cm2 in 15cm cubes at 28days after mixing and tests conducted using 10mm to 20mm size (20mm not to exceed 25 percent) crusher black broken granite stone chips of approved quality and from approved quarry including hoisting,lowering and laying concrete by using vibrators watering and curing for four weeks centering and shuttering and finishing the exposed surface smooth to receive painting or white or clour wasing providing grooves or beads where necessary including cost, conveyance, taxes and royalties of all materials and labour required for the work etc, complete with all T&P and cess in all respect but execluding cost of reinforcement MS rods or tor steel and binding wires of 18 to 20 guage and labour charges etc, complete as per specification and direction of Engineer-in-charge. Column Base |
| 8 | Column |
| 9 | Plinth Beam |
| 10 | Top Copping |
| 11 | Column up to P.B. |
| 12 | Lintel |
| 13 | Chajja |
| 14 | Drain Slab |
| 15 | Drain Wall |
| 16 | Straightening bent up or coiled rods cutting bending,binding, cranking hooking, welding jointing (if required) the M.S.Rods or Tor steel & binding wires and binding tying the grills hoisting lowering & placing in proper position as required for RCC works with cost conveyance & taxes of M.S. Rods or Tor steel & binding wires of 18 to 20 gauge and labour with all T&P required for the work with cess etc,complete in all floors (weight of binding wire will not be considered for payment and payment will be made on weight of M.S. Rods or Tor steel only) etc. in all respects as per the direction of Engineer-in-Charge. |
| 17 | Providing and supplying of HYSD bars confirming to approved grade including straightening cutting bending bindiing lapping , welding etc confirming to ISI specification) & jointing if necessary by lapping & tying the grills & placing in position as required for RCC works as per the approved design placing the grills in position including cost & conveyance of tor steel & binding wires of 18 to 20 guage including cess etc complete as per the specifiction and direction of Engineer-in- charge |
| 18 | 12mm (1/2\\") thick cement plaster in C.M (1:6) finsihed smooth brick work with neat cement punning watering & curing for seven days and two coats of bitumen painting over top of walls and below the bearing of roof slab including cost and conveyance of all materials and labour with T&P required for the work including cess with all taxes and royalties etc, complete in all respects in all floors as per direction of Engineer-in-Charge. |
| 19 | 16mm (5/8\\") thick cement plaster in C.M. (1:6) finished smooth to inside surface of 10\\" thick brick wall after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and labour with T&P required for the work with all taxes, royalties & cess etc, complete in all floor as per direction of Engineer-in-charge. |
| 20 | 6mm thick cement plaster in cement mortar (1:4) to ceilling of roof lintel and chajjas after chipping and chiselling the same and clearing the surface by wire brush finished smooth watering and curing for 7 days including cost,conveyance of all materials and labour with T&P & Cess required for the work with taxes and royality etc complete in all respects in all floors as per direction of Engineer-in-Charge. |
| 21 | Providing full body matt finish vitrified tile flooring using vitrified tiles having thickness of min 10mm conforming to IS 13755 of 600x600 (homogeneous) of premium quality in floors, treads on steps and landings on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and fixing with neat white cement slurry,grouting the joints with neat white cement slurry mixed with required quantities of pigments of approved make to match the shades of the vitrified tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,Labour cess , sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. |
| 22 | Supplying, fitting & fixing of 8-10 mm thick and size of 600x600 mm vertified tile of in dadoes, skirting and risers of steps of laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge. |
| 23 | Supplying, fitting and fixing Granaite tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C. |
| 24 | Providing and Fixing ISI marked 32mm thick flush door shutters conforming to IS : 2202 (part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete |
| 25 | Supplying, fitting, fixing of two track UPVC Sliding window track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with 6mm thick glass of approved quality complete with frame. Sutters and all fitting and fixtures . |
| 26 | Supplying of M.S. Door, Window with grills, Grills made out of M.S. Angle frame, M.S. Flat, Sheet etc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour charges, carriage of materials to site etc. complete in all respect as per specification & direction of the Engineer-in-Charge.Door |
| 27 | Window |
| 28 | Ventilator |
| 29 | Providing fitting and fixing M.S. Door grills and grill gate made out of M.S. angle with flat with cost of all materials, labour charges, carriage of materials to site etc. complete in all respect as per specification & direction of the Engineer-in-Charge.Gate |
| 30 | Providing, fitting & fixing of M.S. Flat including of all cost, conveyance etc all complete in all respect as per specification & direction of the Engineer-in-Charge. |
| 31 | Providing fitting and fixing M.S. square Pipe for roof frame with flat with cost of all materials etc.all complete in all respect as per specification & direction of the Engineer-in-Charge. |
| 32 | Providing, fitting & fixing of M.S. J section ISMB 100 including of all cost, conveyance etc all complete in all respect as per specification & direction of the Engineer-in-Charge. |
| 33 | Priming 1 coat with wall primer water bond cement primer including all labour, materials etc. complete. as per the direction of the Engineer-in-charge. |
| 34 | Finishing wall surface with Cement based wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete. |
| 35 | Finishing wall surface with Acrilic wall putty ( water based ) of approved make and finish smooth and even surface to receive painting including cost of all materials labour T&P etc complete. |
| 36 | Wall painting two coat with any approved weather coat paint including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. |
| 37 | Wall painting two coats with plastic Emulsion paint of approved quality & shade over a coat of primer on new work to give an even shade with brush to interior walls surface after cleaning the surface including cost of plastic emulsion paint with cost, conveyance and taxes of all materials and labour with T&P required for the work with CESS etc complete as per direction of Engineer-in-Charge. |
| 38 | Painting two coats with any approved enamel paint in new wood work including cost of the primer and paint sand papering polishing the surface with cost conveyance and taxes of all materials and labour with T&P required for the work with cess etc, complete as per the direction of the Engineer-In-Charge. |
| 39 | Supplying fitting of Stainless steel of 304 garde in hand railing using 50 mm dia of 2 mm thick circular pipe with balustarade of size 32 mm X 32 mm X X2 mm in 3 rows in stair case as per approved design and specification buffering polisging etc. including cost conveyance of all materials complete as per direction of the Engineer- in - Charge. |
| 40 | Providing average 25mm thick grading Concrete with (1:2:2) using 6mm hard granite chips using 2% water proofing cement compound of approved quality over top of Roof, Terrace, including cost of scaffolding, scraping and cleaning the roof surface, plastering and finishing smooth to proper slope and gradient including cost of all materials, conveyance, taxes and sundries, T&P etc. All complete in all respect as per direction of the Engineer -in-charge. |
| 41 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect.as per direction of the Engineer -in-charge. |
| 42 | Supplying , fitting and fixing of grid mineral fibre ceiling board having size 600 mm x 600 mm x 16mm of approved design and quality complete with frame and all fitting and fixtures. |
| 43 | Providing fitting and fixing up partition walling OEL aluminum anodized section No. 9210 and 9207 as single groove and double groove respectively as horizontal and vertical memer and OEL section 4660 as Tapered clip for fixing up 12mm thick prelaminated board (Nova pan Make) and jointing angle No. 1855 including cost of materials all labour with T&P & Cess required for the work etc complete as per direction of Engineer-in-Charge. |
| 44 | Supplying fitting fixing of 2'-0\\" wide Almirah /Cup Board made out up 19mm & 12mm BWR Ply & covered with 1mm Laminated (Sunmica) including Cromium coated handle 75mm with 125 x 25mm / 100mm with 150x25mm including all fitting including cost of material all taxes, T&P etc complete as per direction of Engineer -in-charge |
| 45 | Supplying, fitting & fixing of Chequered tiles in floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge |
| 46 | Priming one coat with any approved primer including cost of primer over iron work etc. complete. |
| 47 | Painting two coats with any approved paint including cost of paints over iron / Wood works. |
| 48 | Providing, fitting & fixing of G.I. Pipes of 100mm dia including of all cost, conveyance etc all complete. |
| 49 | Supplying and fixing G.C.I sheeet on roof drilling hole in wind ties including fixing of ridges valley wind ties etc excluding cost of fittings |
| 50 | Supplying, fitting and fixing Anti-Skid ceramic tile in floors, treads of steps and landing on 20mm thick cement mortar(1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge. ( For New work Only) |
| 51 | Fixing Ceramic wall tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge |
| 52 | PH WORKRAIN WATER HARVESTING Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge. |
| 53 | 2nd Depth |
| 54 | Supplying filling in foundation & plinth with sand well watered & rammed including cost, conveyance, royalties, taxes all labour, T & P etc all complete as per specification and direction of Engineer-in-charge. |
| 55 | Providing cement concrete (1:3:6) with 12mm size C.B.H.G. chips in floor including supplying all labour, materials, T & P and cost, conveyance, royalties, taxes, etc. allcomplete as per specification and direction of Engineer-in-charge. |
| 56 | Flyash brick work with flyash bricks having crushing strength not less than 75kg/cm2 in cement mortar(1:4) in foundation and plinth. |
| 57 | Providing 12mm thick cement plaster with C.M. (1:4) including cost, conveyance, royalties, taxes all labour, materials T&P etc all complete as per specification and direction of Engineer-in-charge. |
| 58 | Providing C.C.(1:1.5:3) for R.C.C. work with 12mm size C.B.H.G. chips including hoisting & laying including supply of all materials, labour T&P etc. all complete as per direction and specification of Engineer-in-charge. |
| 59 | M.S. Reinforcement for R.C.C. works including cutting,bending, binding and tying grills and placing in position including cost of M.S.Rods,binding wire 18 to 20 gauge. |
| 60 | Suppllying all labour, materials, T&P for rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor. |
| 61 | Cost of 40mm size CBHG metal including labour for filling the trench/well with cost, conveyance, royality etc. |
| 62 | Cost of 25mm size CBHG metal including labour for filling the trench/well with cost, conveyance, royality etc. |
| 63 | Cost of 12mm size CBHG chips including labour for filling the trench/well with cost, conveyance, royality etc. |
| 64 | Cost of 6mm size CBHG chips including labour for filling the trench/well with cost, conveyance, royality etc. |
| 65 | Supplying all materials, labour, T&P and fixing Ceramic tiles in floors, treads abd kabdubg ib 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C. GROUND FLOOR |
| 66 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dado skirting on 12mm thick CP 1:3 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C. GROUND FLOOR |
| 67 | Supplying all materials, labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern with a pair of C.I. or M.S.brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet, overflow pipes, 32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C (PARRYWARE, CERA, HINDWARE) |
| 68 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C. 580mmx440mm size White Orissa pan |
| 69 | European water closet with P trap plain with White Plastic PVC Seat Cover |
| 70 | Providing fitting fixing Al door with anodized Al door section of 9202 as vertical member, 9201 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clip no 4660 and frame to be completed by means of jointing angle no 1855 including cost of labour T&P hire charges of drilling machine labour charges etc complete with cost of laminated board. and as per direction of the Engineer in charge. 3 x 0.70 x 2.10 |
| 71 | Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittings of the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C. (PLAZZ / Parryware / HINDWARE)A) 15mm dia CP Bib Cock (long Body) |
| 72 | 15mm dia CP Angle Stop Cock |
| 73 | 15 mm dia CP Pillar Cock |
| 74 | a) Fixing of 20mmx450mm long CP towel rail |
| 75 | fixing CP soap holder |
| 76 | Fixing of Glass Mirror 600mmx450mm size B.E mirror (fixed type) |
| 77 | 25mm dia U-PVC Ball Valve[Metal Ball] |
| 78 | 32mm dia U-PVC Ball Valve[Metal Ball] |
| 79 | 15mm dia CP flange |
| 80 | 15 mm C.P Extension piece 50 mm long |
| 81 | 15mm dia CP Two way angle/Bib Cock |
| 82 | 15mm dia CP Health Fuccet |
| 83 | 15 mm dia CP Bib cock Elbow Action |
| 84 | 15 mm dia CP Pillar Cock Elbow Action |
| 85 | Supplying all materials, labour, T&P and fitting and fixing U-PVC soil waste ventilating pipes of and fittings of the following outside diameter of 4kg/cm2 conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C. a) 110mm dia PVC SWR pipe |
| 86 | 110mm dia Plain bend |
| 87 | 110mm U-PVC door bend |
| 88 | 110mm U-PVC door Tee |
| 89 | 110mm dia cowl |
| 90 | 125mm dia CP grating |
| 91 | 110mm dia PVC P trap |
| 92 | 75mm dia PVC SWR pipe |
| 93 | 75mm dia Plain bend |
| 94 | Supplying all materials, labour, T&P and providing and fixing to wall or ceilling and floor PVC pipes conforming to (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing etc all complete as per P.H specification and direction of the E.I.C. 25mm dia PVC(ASTM) pipe(External) |
| 95 | 32mm dia PVC(ASTM) pipe(External) |
| 96 | Supplying all materials, labour, T&P and laying in trenches 4kg/cm2 U-PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C. Laying of 100 mm dia S.W Pipe line Haunch top |
| 97 | Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:1.5:3) mix using 12 mm size H.G chips, foundation concrete (1:3:6) using 40 mm size HG metal on bed and around trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C. (a).Inside size 250mmx250mm |
| 98 | Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C Inside size 760mm x 760mm x 460mm |
| 99 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. Construction of Soak way Pit (1.00 m dia x 2.00m Deep) |
| 100 | BORE PROTECTION Supplying all materials, labour, T&P for construction of bore protection wall with providing sand filling, cement concrete (1:4:8) with HG metal & KB brick work in cement mortar (1:6) of 1.15 height, 16mm thick CP over the brick work, RCC slab of size 0.95 x 0.95 x 0.75 mtr avairage length in C 1:1.5:3, centering shutering including watering curing conveyance of all materials to work site with all cost, taxes etc all complete as per as per the direction of E.I.C. |
| 101 | Supplying all materials, labour, T&P and Fitting and Fixing of Precast R.C.C ring water storage over head tank including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, fixing ball valve etc. and placing the tank in required position and providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod, watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 102 | Supplying all materials, labour, T&P and Fitting and Fixing of PVC water container 2 nos. of capacity 10 Ltr and 100Ltr etc all complete as per P.H specification and direction of the E.I.C. |
| 103 | Aquaguard cooler cum purifier (with all standard Accessories) Model : (120 PSS RO+UV), Make - Eureka Forbes Limited |
| 104 | EI WORKModular wiringRecessed wiring to Light point/Fan point/Call Bell/Exhaust Fan Point with 1.5 sqmm, FR PVC Insulated single core multistrand copper conductor of ISI marked with 20 mm dia non- metallic PVC flexible conduct with 5 Amp, 250 V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size,MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor and earth wire incouding all accessories and connection as per direction of engineer in charge (Make of wire = Finolex/L&T/ Anchor/ V-Guard) deducting the cost of 2M Box with cover Plate-1 No.)(1.1.1-1.24.2) -do- Group A |
| 105 | (1.1.2-1.24.2) -do- Group B |
| 106 | (1.1.3-1.24.2) -do- Group C |
| 107 | S/F of Angle holder replacing Ceilling Rose |
| 108 | Swich BoardsS/F to 16/18 SWG Modular GI box of following sizes (normal sixe) in recess with suitable size of Modular Base & Cover in front including cutting the wall and making good the same in case of recessed conduit as required.for .do 6 Module |
| 109 | .do 8 Module |
| 110 | .do 12 Module |
| 111 | S/F of 5/6 Modular Switch & 3pin 5/6A Modular Socket on existing board (1.25.1+1.25.4) |
| 112 | S/F of 6M GI box on surface or in recess with suitable size of Modular base cover cover in front including providing and fixing of 2 nos 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required (1.26) |
| 113 | S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 32A DP Modular Switch with neon Indicator & 5 pin 15/16 amp. piano type Modular Socket & Mini DP MCB, connection, painting etc as required for AC |
| 114 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover. |
| 115 | S/F of 6M GI box on surface or in recess with suitable size of Modular base cover cover in front including providing and fixing of 2 nos 5 pin 15/16 amp. Modular Socket out let & 15/16amp. Modular type switch,connection,painting etc. as required (1.25.3+1.25.5) |
| 116 | Sub-MainWiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x1.5+1x1.5 (1.8.1) |
| 117 | 2x2.5+1x1.5 (1.8.2) |
| 118 | 2x4+1x1.5 (1.8.3) |
| 119 | Circuit Breakers S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1)Make: L&T/Legrand/Hager/Schneider |
| 120 | S/F of 'B/C/D' series DP MCB of 32 amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)+(2.3.1b)Make: L&T/Legrand/Hager/Schneider |
| 121 | Distribution Board Supply and fixing of following size MCB box with sheet steel enclosure, distribution board, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland /plate, interconnection, phosphate and powder painted including earthing etc. as required ( But without MCB/ RCCB/ ISOLATOR)Make-Legrand/L&T/Greatwhite/C&S 4 way Double Door (2.3.5 ) |
| 122 | EarthingSupply & laying 8 SWG Cu wire in recess for loop earthing as required (3.18) |
| 123 | S/F of Cu .Earth Plate Earthing 600 mm x600mmx3.15mm with Salt & Charcoal for Earth electrode (3:5)+(3.6) |
| 124 | Electrical FittingsSupply and fixing of 300mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12\\" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delus R/Orient-Power Flow DBB// Pollycab -Fresh on DBB ) |
| 125 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 126 | S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL/ Havells/PAC/Crompton/Polycab) |
| 127 | Supply and fixing of 1200mm A.C. Ceiling fan (1 star) with all accessories and connections with out fan regulator (Make:Usha-Striker neo HS/Crompton- Highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White - Aldous/ Pollycab - Vital HS ) |
| 128 | S/F step type modular fan regulator |
| 129 | Supply and fixing of 90 Watt Single LED Street Light Industrial Grade with Lenses Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton/Phillips/Havells ) |
| 130 | Supply and fixing of 60 Watt Single LED Street Light Fitting with LED & Electronic driver with Clamp & all accessories and connections ( Make- Crompton/Phillips/Havells ) |
| 131 | S/F of 15w Watt LED Bulb |
| 132 | S/F of 1.5T 3Star split type AC Machine, Make-Carrier/Voltas/Hitachi |
| 133 | S/F of 5KVA Automatic Voltage Stabilizer(130-300V), Make-Microtech/V-Guard |
| 134 | S/F of 2250 VA/24V Inverter with 2 nos. 180Ah battery including trolley arrangement (Make: V-Guard/ Microtake/ Luminous |
| 135 | Supply, of recess mounted round Warm White LED COB spot downlighter with aspecial frosted diffuser suitable for 6W LED fitting including 6 watt LED luminairs of approved make complete with all materials & labour. (Make-Philips/Havells/Crompton/Wipro) |
| 136 | Supply, Installation,Testing & commissioning of indoor Flexible Warm White LED strip Light of 25W/5mtr Spoolwith Driver for cove lighting including all other materials as required.(Make-Wipro/Philips/Crompton/Havells) |
| 137 | CCTV Surveillance System SITC of 32Channel SMART NVR (Or Above) support 8MP(4K),S+265/H.265,,Support 4 SATA HDDs (upto10TB Each),Support Multi-brand network cameras, Bandwidth Incoming 320Mbps,Outgoing-180Mbps, HDMI & VGA Simultaneous video support,Al by Camera: Face detection and recognition, perimeter protection; SMD Plus; ANPR; people counting; stereo analysis; heat map,detecon alarm is supported, Support cloud upgrade. Including all other materials & as directed by site-incharge Make: Honeywell/Hikvision/ Axis/ Plco |
| 138 | Supply & fixing of 4MP Bullet IP CAMERA Image Sensor 4MP(2560x1440)@25/30fps ,In-built Mic, Min. Illumination Color: [email protected], POE, IP67, Smart IR Range: 50Mtrs, Sd Card-512GB,Day/Night, BLC/3D- DNR/HLC/Smart Defog Operation Condition- (-35 degree to +65 Degree) Motion Detection, Mask Alarm, IP Address conflict . Including all other materials & as directed by site-incharge Make: Honeywell/Hikvision/ Axis/ Plco |
| 139 | Supply & fixing of 4MP Dome IP CAMERA Image Sensor 4MP(2560x1440)@25/30fps ,In-built Mic, Min. Illumination Color: [email protected], POE, IP67, Smart IR Range: 50Mtrs, Sd Card-512GB,Day/Night, BLC/3D- DNR/HLC/Smart Defog Operation Condition- (-35 degree to +65 Degree) Motion Detection, Mask Alarm, IP Address conflict. Including all other materials & as directed by site-incharge Make: Honeywell/Hikvision/ Axis/ Plco |
| 140 | Supply of 10TB HK-HDD10T,Audio/Video-24/7 Continuous Operation. Make: Toshiba/Segate |
| 141 | SITC of 16-Port Gigabit Switch 10/100/1000T ,16EP+2G+1SFP Al PoE Switch,Networking standard: IEEE802.3af/at/bt PoE Watchdog Al Function: Detection front-end PoE cameras and PD, Automatic detection, Automatic restart,Upload port automatic flip (Auto MDI/MDIX),FE ports can support 250 meters long distance transmission automatically,6KV lightning protection,8KV surge protection, anti-reverse connection, over-current protection, over-voltage protection, over-temperature protection, Short circuit protection,The port Max power Output is 60 watts, it is convenient for high-power device,Power Budget 300W,Energy-Efficient Ethernet, Operating Environment Temperature: 0 ~ 50°C Storage Environment Temperature: -10 ~ 70°C Operating Humidity Relative Humidity: 5 ~ 95% (non-condensing) Storage Humidity Relative Humidity: 5~95% (non-condensing) Make: Honeywell/Hikvision/ Axis/ Plco |
| 142 | Supply of 4U Wall Mount Rack loaded with one no 3Skt 6/16A power distribution unit, 1no cable manager, 1no 90 CFM FAN, one pkt H/W screw.Basic frame: CRCA (MS SHEET) 0.6mm thick,Construction-Welded,Top & Bottom cover: cable entry cut-outs,Front Door: Lockable-Toughened glass with Lock & Key,Toughened Glass used as an excellent thief deterrent,Standard finish: Powder coated,Dual-Tone Gray Color - fits in well with all indoor /outdoor aesthetics,Differentiator Quality,Load Bearing Capacity - 15kg,Industry leading design. Including all other materials & as directed by site-incharge Make: D-link/Dgisol |
| 143 | Supply CAT6 Armoured Cable,Generally confirming to EIA/TIA 568-C.2 and IEC/ISO11801,Excellent Margin with suppression of Cross Talk (NEXT),4 Pair Separator Design,23 AWG cable,For Outdoor installation. Including all other materials & as directed by site-incharge Make: D-link/Finolex |
| 144 | Supply and laying of 20mm pvc conduit in complete & all others accessories are connection as per the direction of engineer incharge . Make: AKG |
| 145 | Supply of HDMI cable Extender |
| 146 | Supply and fixing of 32\\" IPS HD Display with 440 NITS, 1200:1 Contrast Ratio, android professional display in complete as per the direction of engineer incharge.with 3yeras warranty.Supply,installation,testing & commissioning of Tv Wall Mount Bracket. Make: Sony ,Samsung,LG |
| 147 | Supply of Wireless mouse |
| 148 | Supply,installation of Rj 45 Connectors Make: Tyco-AMP/ Schneider/ Digisol . |
| 149 | P.A. System Supply & Installation of PA Amplifire with 2 mic point & 1 Aux. point, built in MP3 player with USB reader and remote, 120 watt AC & 12 Volt DC Operation. Make: Ahuja/Bosch/Sennheiser |
| 150 | Supply of high quality ABS wall mount speaker for indoor 6\\" & 6 watt / 100 volt Make: Ahuja/Bosch/Sennheiser |
| 151 | Microphone with cord Make: Ahuja/Bosch/Sennheiser |
| 152 | Microphone stand round base Make: Ahuja/Bosch/Sennheiser |
| 153 | Supply of 2 core 1.5 sq mm Cu. control cable |
| 154 | Fire Extinguisher Supplying, fixing, of 4.5Kg dry CO2 Fire extinguishers with wall mounting brackets first filling etc. Including all materials,labour,taxes (excluding GST) etc as required as per direction of EIC. |
| 155 | Supplying, fixing, of 5Kg ABC Powder(stored Pressure type) Fire extinguishers with wall mounting brackets first filling etc. Including all materials,labour,taxes (excluding GST) etc as required as per direction of EIC. |
| 156 | CablesProvision of 40mm dia HDPE Pipe |
| 157 | Provision of Armoured cable size 2x6sqmm (15) |
| 158 | Laying of MV cable upto 25sqmm in ground (5.1.1) |
| 159 | Supply & Laying of Cu Round cable size 3x2.5 sq mm |
| 160 | Supply & Laying of 1\\" HDPE Pipe |
| 161 | Area lighting & Solar Street LightingSupply & Instalation of 7 meter HDG octagonal Pole shall be designed to withstand the maximum wind speed as per IS 875.(Top 70 mm & Bottom 130mm of 3 mm thick) The poles shall with average coating thickness of 70 micron.The pole shaft shall have octagonal cross section and shall be continuously tapered with single longitudinal welding(MAKE-Bajaj/Utkarsh )with Four arms detachable ring type Bracket suitable to hold lights symmetrically. The Base Plate (225X225X16mm) with 4 nos of plinth Foundation bolts(20 mm dia 700mm Length) to be mounted on RCC Foundation (1.25'X1.25'X5' high) (Below GL-4',Above GL-1') using HYSD steel reinforced for errection of Pole firmly with junction box, SP MCB-1no , 3 Pole stud connector-1 no & 3x2.5sqmm Round Sheathed copper Conductor-14mtr as per direction of Engineer in Charge.Make: Utkarsh/Bajaj/Crompton/RR Ispat |
| 162 | Supply & Instalation of 10W LED Bollard light with RCC foundation for fixing of Bollard Light as per direction of Engineer in Charge.Make: Philips/Havells/Crompton |
| 163 | Supply & Instalation of 6 meter HDG octagonal Pole (Top 70 mm & Bottom 130mm of 3 mm thick) with single arm detachable ring type Bracket suitable to hold the light fitting on 1500mm long beacket . The Base Plate (220X220X12mm) with 4 nos of plinth Foundation bolts(20 mm dia 600mm Length) to be mounted on RCC Foundation (1.25'X1.25'X5' high) (Below GL-4',Above GL-1') using HYSD steel reinforced for errection of Pole firmly with junction box, SP MCB-1no ,3 Pole stud connector-1 no & 3x2.5sqmm Round Sheathed copper Conductor-9mtr as per direction of Engineer in Charge.Make: Utkarsh/Bajaj/Crompton/RR Ispat |
| 164 | Supply of 60 W AIO Solar street lights having 150Wp or more highly efficient Monocrystalline PV module & 12.8 V 66 Ah or more ) Lithium Ferrophosphate (LiFePo4) Battery (BIS approved) which shall be inside the extruded aluminium luminaire housing (Theft retardant type), MPPT charge controller having > 92% efficiency & PIR Sensor. The initial lumen output of AIO street light shall be >9600 lumen or more in CCT 6000K (+/-500K) (Lumen efficacy of 160 lm/w ) as per LM 79 report of NABL lab The LED chip will be of OSRAM/NISCHIA/CREE/SEOUL Semiconductor only and should be with lenses for effective lighting distribution. The complete system & BMS should be designed to provide 2 days (24 Hrs) back up in dimming mode by activating PIR sensor and battery should be kept inside the luminaire and Mono Crystalline Panel (Made in India ) to be mounted on the top of the luminaire housing. The luminaire must be having IP 66 protection for critical component like (LED compartment, Driver compartment & Battery) . The AIO street light is having IK 08 .The luminaire should have the provision the tiltable/ adjustable mounting bracket to mount it on the top of the pole directly. Warranty on the AIO street lights must be 5 years . The following test reports/certifications must be submitted for the technical acceptance of the products .1. LM 79 REPORT NABL lab ) , 2. IK 08 (Report of NABL lab ), 3. IP 66 Report of NABL lab Make:Havells/Crompton/Panasonic/Bajaj/Philips |
| 165 | Indoor & Outdoor LED Display BoardS/F & Commissioning of LED display 55 with bracket and all other acessories connections as per the Engineer-in-charge (Model Sony BRAVIA 2 K 55S25B (55, 4K Google TV) ) |
| 166 | Glow Sign Board2.5\\"X1.5\\" hallow square aluminum pipe framed cover the aluminum based panel sheet. Setting, bending 2\\"X3\\" hallow square aluminum pipe framed cover the aluminum based panel sheet. Plastics Sheet: - 2.5 mm Plastics Sheet with Colour Reising. Cutting, Bending & setting with designing of Plastics latter displaying L.E.D:- 0.5 to 1.5 Watts with any colour as per the requirement. Power Supply: - SMPS (Switch mode Power Supply), RPS (Regulate Power Supply). In put Voltage 160 to 230 A.C./ Out put Voltage 12/24 Voltas D.C Electrical wiring with L.T. wire for internal wiring of the signboard.L.T.Wires: -0.5 & 1.5 sq mm Flexible wires (Finolex) Auto ON/OFF Switch: - Electronics solid state (+/- 10 Secand), Manual (+/- 15 Minuets) - 1 No as per Engineer-in-charge of approved make including with all materials & labour |
| 167 | Servicing of DG Please Enable Macros to View BoQ information |
