|
| 1 | Dismantling of plain or corrugated steel sheeting any guage thickness including nainital or similar pattern roof covering complete all as specified and directed. |
| 2 | Dismantling of asbestos cement (corrugated,semicorrugated etc) sheets in roof covering complete all as specified and directed. |
| 3 | Dismantling of timber scantling 40 sqcm over in section in any position (unframed work) complete all as specified and directed. |
| 4 | Dismantling wrought Iron or mild steel work of any description not other wise described complete all as specified and directed. |
| 5 | Dismantling boarding any description fixed in any position with nails complete all as specified and directed. |
| 6 | Dismantling of wall/ceiling boards (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets complete all as specified and directed. |
| 7 | Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 8 | Demolition of plain cement concrete (unreinforced) in ground floors or above ground floor and paving n.exc 15 cm thickness (Below or above ground level) complete all as specified and directed. |
| 9 | Demolition of PCC block masonry, brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles, complete all as specified and directed. |
| 10 | M&L for pre-cast PCC solid block walling with cement concrete type C1 (1:3:6, using 20 mm graded crushed stone aggregrates) exc.10cm in width and setting in cement mortar 1:4, complete all as specified and as directed. |
| 11 | M&L precast cement concrete solid block type C1 (1:3:6, using 16 mm graded crushed stone aggregrates) 10cm thick in CM 1:4, straight or curved on plan to any radius complete all as specified and as directed. |
| 12 | M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 13 | S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 14 | M&L for roof truss (framed) trussed, purlin etc of angle or other section for refixing of sheets and similar works complete of Gde Fe-290 (Gde E-165) all as specified and directed. |
| 15 | M&L 2nd class hard wood in scantling clean sawn timber fixed complete all as specified and directed. |
| 16 | S&F 20mm thick 2nd class hard wood boarding in eaves board/fascia or any other boarding horizontal or vertical, plained one side with butt joints fixed with nails complete complete all as specified and directed. |
| 17 | S&F Solid PVC Wall panelling consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 18 | S&F hollow/insulated PVC Wall panelling consisting of 10mm thick plain colour PVC sheet, suitably fixing/placed at site on walls/false ceiling including grid made of Aluminium/G.I./M.S. as per specification and drawing complete all as specified and directed. |
| 19 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 20 | M&L plain fillets square rectangular or triangular in section clean sawn secured with nails or brads (2nd class hard wood) sectional area exc 13 sqm n exc 25 sqcm complete all as specified and directed. |
| 21 | S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed . |
| 22 | M&L for 4mm thick non asbestos fiber cement building boards 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed. |
| 23 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 24 | S&F 12 thk seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed. |
| 25 | M&L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundation , filling and mass concrete complete all as specified and directed. |
| 26 | M&L plain cement concrete Type C2 1:3: 6 (40mm graded aggregates) in foundations, filling in post of fencing, pcc sub-base and mass concrete complete all as specified and directed. |
| 27 | M&L for PCC 1:2:4 Type B0 using 12.5 mm graded aggregate as in levelling course, haunching, coping and similar works of over RCC roof surface including rounded or chamferred on edges etc complete all as specified and as directed. |
| 28 | M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed. |
| 29 | M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed. |
| 30 | M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.18 sqm but n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and directed. |
| 31 | M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed. |
| 32 | M&L Dark shade virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors, dados, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 33 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 34 | M&L rendering 15mm thick, CM 1:6 on fair faces of brick work or concrete surfaces complete all as specified and directed. |
| 35 | M&L rendering 10mm thick, CM 1:4 on fair faces of brickwork or concrete surfaces complete all as specified and as directed. |
| 36 | M&L prepairing old wall surfaces by washing rubbing down and stopping of distempered or any painted surfaces and priming with alkali resistant primer paint and two coats of cement base paint complete all as specified and directed. |
| 37 | M&L distempering with 1st quality oil emulsion distemper on walls white or tinted, two or more coats complete all as specified and as directed. |
| 38 | M&L providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 39 | M&L prepairing new plastered surfaces by priming with alkali resistant primer paint and applying two coats of cement base paint complete all as specified and directed. |
| 40 | M&L preparation of old painted surface of wood any description scrubbing, rubbing down and stopping over 10cm width or girth and two coat of synthetic enamel paint (ordinary tint) complete all as specified and directed. |
| 41 | M&L preparation of old painted surfaces of wood surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint two coat of synthetic enamel (ordinary tint) incl scrubbing, washing, rubbing down and stopping complete all as specified and directed. |
| 42 | M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed. |
| 43 | M&L preparation of new painted surfaces of wood surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint two coat of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 44 | M&L Preparation of old steel and iron surfaces of any description, over any width or girth,not otherwise described applying two coats of aluminium paint over one coat of red oxide primer, complete all as specified and directed. |
| 45 | M&L Preparation of new steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. |
| 46 | M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Two coats of Creosote complete all as specified and directed. |
| 47 | Disconnecting existing tanks setting aside (or lowering if required) for repairs , cleaning and removing all scale and dirt etc from tanks and mouths of circulating pipes etc and hoisting if required reconnecting and refixing in position complete exc 250 and nexc 500 ltrs all as specified, pasting sticker of computer printed pvc sheets of size (200x200mm) writing date of cleaning complete all as specified and directed. |
| 48 | Disconnecting existing tanks setting aside (or lowering if required) for repairs , cleaning and removing all scale and dirt etc from tanks and mouths of circulating pipes etc and hoisting if required reconnecting and refixing in position complete exc 500 and nexc 1000 ltrs all as specified, pasting sticker of computer printed pvc sheets of size (200x200mm) writing date of cleaning complete all as specified and directed. Please Enable Macros to View BoQ information |
