|
| 1 | Taking down chowkhats/frames with shutters (without taking off shutters from the frames) n exc 1.5 Sqm each, complete all as specified and directed. |
| 2 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling and fixing in opening as per specification and drawing, complete all as specified and directed. |
| 3 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 4 | Taking down chowkhats/frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n exc 4 Sqm each, complete all as specified and directed. |
| 5 | S&F for 2nd class hard-wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 6 | S&F 35mm thick 2nd class hard wood glazed and skelton door shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20(a), complete all as specified and directed. |
| 7 | M&L for 35mm thick 2nd class hard wood factory made plain framed, panelled door shutter any number of panel with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln easoned and chemically pressure treated, complete all as specified and directed. |
| 8 | M&L for aluminium anodised powder coated sections of approved and required size for door / windows frames or chowkats / partitions / shutters, sliding channels / tracks etc including jointing cleats, MS nut & bolts or steel screws, dash fasteners, rowel plug for fixing of screws in wall or floor etc., complete all as specified and as directed. |
| 9 | S&F Anodised aluminium powder coating of any colour (Thickness or powder coating not less than 50 micron) door shutters, aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, EPDM beading, handles 2 Nos, 01 X lock with duplicate key & 03 x hinges 100 mm in each door, anodised aluminum snap beading, screws etc and 12 mm thick particle board in lower panel ad 5 mm thick glass in upper panel and any other accessory required, complete all as specified and as directed. |
| 10 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples all as specified. |
| 11 | S&F 250 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed. |
| 12 | S&F mild steel butt hinges, medium weight, of size 100mm and fixed, complete all as specified and directed. |
| 13 | S&F alumnium handles cast type of size 150 mm, complete all as specified and directed. |
| 14 | S & F Aluminium anodised barrel tower bolt of extruded section 150 mm long, complete all as specified and directed. |
| 15 | S&F 30mm thick 2nd class hard wood glazed and skelton window shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20(a), complete all as specified and directed. |
| 16 | S&F 30mm thick 2nd class hard wood glazed and skelton window shutters open rebated and prepared to receive gauze etc (but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20(a), complete all as specified and directed. |
| 17 | S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed. |
| 18 | S&F mild steel butt hinges, medium weight, of size 75mm and fixed, complete all as specified and directed. |
| 19 | S&F alumnium handles cast type of zize 100 mm, complete all as specified and directed. |
| 20 | S & F 100mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed. |
| 21 | S & F aluminium powder coated partitions made of the following specifications, complete all as specified and directed:-(Net external size of partition shall be measured. Following items are included in this unit rate.)(a) Aluminium frame powder coated (Vertical and horizontal members) @ not exceeding 1.20 m distance both ways of hollow section 100 mm x 44 mm x 1.60 mm thick.(b) Lower portion of partition shall be fixed with 12 mm thick particle board fixed with suitable aluminium beading clips and EPDM beading (rubber) and all other accessories.(c) Upper portion of partition shall be fixed with 5 mm thick glass (as per user requirement) fixed with suitable aluminium beading clips and EPDM beading (rubber) and all other accessories.(d) Dismantling of old unservicable partitions of any description and any thickness (AC sheets, wooden particle boards with wooden frame etc ).(e) Repair to the jamb, cills and all sides around the partition is incl in unit rate. The repair finishes to match the existing surfaces like tiles, plastering, OBD etc. |
| 22 | M&L for Pre Polished Machine cut kota stone slab (Mirror finish) flooring 18-20 mm thick over cement screed base 15 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl roughening/complete scarification of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and directed. |
| 23 | M&L for Pre Polished Machine cut Kota stone slab (Mirror finish) 18-20 mm thick in riser of steps, skirting, dado and pillar laid over 10 mm cement plaster in CM 1:4 incl roughening/complete scarification of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and directed. |
| 24 | M&L for Light shade Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15 mm thick Screed bed or bedding layer of mortar in CM 1:4 for laying floor finishes including dismantling of old floor tiles of any description, complete all as specified and directed. |
| 25 | M&L for Light shade Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, in skirting / vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including 10mm thick backing coat in cement motor 1:3, including dismantling old floor, hearth or wall tiling including cement mortar bedding (but not backing) etc., complete all as specified and |
| 26 | M&L for coloured glazed ceramic tiles of size 450x 300x 7mm thick, best quality as in skirting, dados, walls, vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in cement motor 1:4, including dismantling old floor, hearth or wall tiling including cement mortar bedding (but not backing) etc., complete all as specified and directed. |
| 27 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in CM 1:4 and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed. |
| 28 | M&L for 25 mm thick plain cement concrete type B-0, 1:2:4 (12.5mm gradedcrushed stone aggregate) as in sub base/levelling course including demolition of cement concrete un-reinforced in ground floor and paving n.exc 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 29 | M&L for Granite (of any type) 18-20mm thick machine cut, as in floors and skirting, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and incl 15 mm thick screed bed in CM 1:6 and includiing roughening/complete scarification of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all specified and directed. |
| 30 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand over and including 75 mm thick Cement concrete type D- 2, 1:4:8 (20mm graded aggregate) sub base including demolition of Concrete of any thickness/description and in any position not otherwise specifically provided for complete all as specified. |
| 31 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, including and over for 100mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in sub floors, sub-base,etc. and finishing surface of concrete even and rough to receive the topping layer and including demolition of Concrete of any thickness/description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 32 | M&L for 75mm thick cement concrete 1:3:6 type C-1( using 40 mm graded crushed stone aggregate) as in plinth protection finished etc finished cement concrete even and smooth without using extra cement and filling the construction joints with mastic filling and including demolition of Concrete of any thickness/description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 33 | M&L for plain cement concrete Type B1, 1:2:4 using 20 mm graded crushed stone aggregate as in surface channels and drains including demolition of cement concrete un-reinforced in ground floor and paving n.exc 15 cm thickness (below or above ground level) and including demolition of Concrete of any thickness/description and in any position not otherwise specifically provided complete all as specified and directed |
| 34 | M&L for Plain cement concrete 1:2:4 type B1, using 20mm graded stone aggregate as in coping/post holes etc including weathering, slightly rounded or chamfered angle and throating and including demolition of Concrete of any thickness/description and in any position not otherwise specifically provided complete all as specified and directed. |
| 35 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required including demolition of exisitng kerb stones/concrete etc., complete all as specified and directed. |
| 36 | M & L for Chequered cement concrete tiles 30cm X 30cm X 25cm thick, with gray cement and no pigments set, jointed in neat cement slurry in floors including 15mm thick screed bed CM 1:4, over and including 75 mm thick plain cement concrete type D- 2, 1:4:8 (using 20mm graded crushed stone aggregate) as in sub base including demolition of Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 37 | S & F Hollow PVC lining /panelling on ceiling/wall consisting of 5mm thick Plain colour PVC sheet incl all PVC sheet fillet of width 20mm 'L' & 'U' for wall paneling inclusive of fixing on to ceiling with suitable frame work incl dismantling of old ceiling panels of any description, complete all as specified and directed. |
| 38 | S&F 12 mm thick Zypsum ceiling boards including anodised aluminium snap grid frame work for false ceiling, ceiling shall be joint less finishing with putty and oil bound distemper etc complete and including dismantling of old ceiling of any description / thickness, complete all as specified and directed. |
| 39 | S&F in repair 4mm thick non asbestos fibre cement building boards fixed or laid over including anodised aluminium snap grid frame work of size 605mmx605mm for false ceiling including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and including dismantling of old ceiling of any description / thickness, complete all as specified and directed. |
| 40 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 41 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 42 | S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors (incl ornamental and intricate design) ; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and directed. |
| 43 | Dismantling timber scantlings 40 sq. cm and over in section, in any position, complete all as specified and directed. |
| 44 | S&F for joist,channel,angle,or tee sections, fixed independently, without connecting plates,etc (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe-410 W(Gde- E-250)Quality-A complete all as specified and directed. |
| 45 | S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee, angle, channel or flat sections) including distance pieces,cleats etc Fe 410-w(Gde-E-250) Quality-A, complete all as specified and directed. |
| 46 | M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed |
| 47 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling of old roof sheets (any description, any thickness), complete all as specified and directed |
| 48 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling of old roof sheets (any description, any thickness), complete all as specified and directed |
| 49 | S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 including dismantling of plain or corrugated steel sheeting ,any gauge, thickness including Nanital or similar pattern roof covering etc., complete all as specified and directed. |
| 50 | S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, fixed with coach screws and washers, in roof, wall etc including dismantling of plain or corrugated steel sheeting ,any gauge, thickness including Nanital or similar pattern roof covering etc., complete all as specified and directed |
| 51 | S&F rotational moulded polythylene water storage tank 1000 litres capacity (Cylindrical vertical with closed top or any other shape as ordered) hoisted and fixed in position incl tank connection nipple, all other accessory and ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of size 25mm dia and fixed and also including dismantling of old water tank, complete all as specified and directed |
| 52 | S&F rotational moulded polythylene water storage tank 500 litres capacity (Cylindrical vertical with closed top or any other shape as ordered) hoisted and fixed in position incl tank connection nipple, all other accessory and ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of size 25mm dia and fixed & also including dismantling of old water tank, complete all as specified and directed |
| 53 | S&F 40 mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc incl taking up or down steel/PPR tubing and connections, complete all as specified and directed |
| 54 | S&F 32 mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc incl taking up or down steel/PPR tubing and connections, complete all as specified and directed. |
| 55 | S&F 25 mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc incl taking up or down steel/PPR tubing and connections, complete all as specified and directed |
| 56 | S&F 20 mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc incl taking up or down steel/PPR tubing and connections, complete all as specified and directed |
| 57 | S&F PP-R Gate valves (brass insert) of 40 mm outer dia as per requirement of the site, complete all as specified and directed. |
| 58 | S&F PP-R Gate valves (brass insert) 32mm outer dia as per requirement of the site, complete all as specified and directed. |
| 59 | S&F PP-R Gate valves (brass insert) 25mm outer dia as per requirement of the site, complete all as specified and directed. |
| 60 | S&F in repair 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or in walls incl all tees, elbows, sockets and other fittings etc., complete all as specified and directed. |
| 61 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 10 litres PVC flushing cistern and flush pipe, complete all as specified and directed. |
| 62 | S&F in repair Vitreous china premium/ 1st quality wash down water closet (Padestal Pattern - EWC) white/ ivory/off white closed pattern incl seat cover & all necessary accessories like bolts (excluding flushing cistern & flush pipe) complete in all respect, complete all as specified and directed |
| 63 | S&F for China one piece EWC white/ ivory/off white including all accessories, seat cover, bolts, flushing cistern complete in all respect, complete all as specified and directed. |
| 64 | S & F in repair Vitreous china wash basin white flat back size 580x450 mm excluding taps waste chain and plug and porcelain stopper but including brackets, 32mm dia CP waste coupling and waste pipe etc., complete all as specified and directed |
| 65 | S & F in repair Vitreous china counter top wash basin white size 600x400x150 mm excluding taps waste chain and plug and porcelain stopper but including brackets, 32mm dia CP waste coupling and waste pipe etc., complete all as specified and directed |
| 66 | S&F in repair Vitreous China Urinal, Half stall type, white including waste pipe, coupling, CP Urinal spreader and all accessories, complete all as specified and directed. |
| 67 | S&F for toilet paper holder of chromium plated or stainless steel fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed. |
| 68 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed |
| 69 | S&F in repair 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed |
| 70 | S & F in repair 15mm bore Brass/CP wall mixer 3-in-1 with telephonic shower arm and complete accessories for mixing hot & cold water screwed down for iron/PP-R pipe and fixed, complete all as specified and directed. |
| 71 | S & F in Repair 15mm bore WHB mixer, for mixing hot or cold water, brass, CP, fancy type, with capstan head handles, screwed down high pressure, screwed for iron pipe or for brass ferrule of 15mm dia, complete all as specified and directed. |
| 72 | S&F in repair 15 mm angle valve/stop valves, CP Fancy type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed |
| 73 | S&F in repair 15 mm Pillar taps, CP Fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed |
| 74 | S&F in repair 15 mm Bib taps, CP Fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed |
| 75 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed |
| 76 | Supply and fixing in repair 450mm X 600mm looking mirror Fancy type of selected quality fixed on wooden plug with chromium plated brass screws and cup washer, complete all as specified and directed |
| 77 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed |
| 78 | S&F in repair 28-30 mm dia Curtain Rods, mild steel (coloured - in wood finish or any other colour approved by user) with suitable fixing brackets and 02 x decorative Finials for each curtain rod and all other accessory, complete all as specified and directed. |
| 79 | M&L Brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 including demolition of brickwork built in cement mortar in any position, complete all as specified and directed . |
| 80 | M&L for 15mm thick cement plaster on fair faces of brick or concrete surface in CM 1:4, surfaces finished even and smooth without using extra cement, complete all as specified and directed |
| 81 | M&L for rendering 15mm thick cement plaster on fair faces of brick or concrete surface in CM 1:4 finished fair & even, including taking down cement plaster of any thickness, complete all as specified and directed |
| 82 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new wall surfaces etc., complete all as specified and directed |
| 83 | M&L for rendering 10mm thick cement plaster on fair faces of brick or concrete surface in CM 1:6, surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 84 | M&L rendering 10mm thick cement plaster on fair faces of brick or concrete surface in CM 1:6 finished fair and even, including taking down cement plaster of any thickness, complete all as specified and directed. |
| 85 | M & L for preparation of new wall surfaces and applying two coats oil bound distemper smooth finish including application of wall care putty, complete all as specified and directed. |
| 86 | M & L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed |
| 87 | M&L for preparation of old steel surfaces of any description, over 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 88 | M&L for preparation of old steel surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed. |
| 89 | M&L for preparation of old plastered or unplastered wall surface and applying two coats of cement base paint, complete all as specified and directed. |
| 90 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old wall surfaces etc including complete removal of exisitng treatment, complete all as specified and directed. |
| 91 | M & L for preparation of old wall surface and applying two coats oil bound distemper smooth finish incl application of wall putty wherever reqd to make up for undulations/cracks etc., complete all as specified and directed. |
| 92 | Providing precast cement concrete 1:2:4 type B1 using 20mm graded in landings, cover slabs (for man hole covers etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 93 | S&F for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 94 | Notes :-An amount of Rs 88,400.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
