|
| 1 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. (DSR 18.10.6) |
| 2 | 50MM DIA |
| 3 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : (DSR 18.46.6) |
| 4 | 50mm i/d |
| 5 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 6 | (A) Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) |
| 7 | (B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 |
| 8 | © Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. |
| 9 | (D) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. |
| 10 | (E) Suitable cement concrete foundation duly plastered and with anti vibration pads. |
| 11 | 450 lpm at 35 m Head |
| 12 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of Post office Red complete as required : |
| 13 | 80mm dia |
| 14 | 100mm dia |
| 15 | Supplying and fixing single headed internal hydrant valve with instantaneous Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank cap and chain as required : |
| 16 | Single headed Stainless steel |
| 17 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : |
| 18 | 100mm dia |
| 19 | Providing, installation, testing and commissioning of Dual plat non-return valve/Check valve of following sizes with rubber gasket, GI bolts, nuts, washers etc.as required : |
| 20 | 100mm dia |
| 21 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : |
| 22 | Stainless Steel (Grade 304) |
| 23 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. |
| 24 | 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 |
| 25 | 20 mm nominal internal dia gun metal globe valve & nozzle. |
| 26 | Drum and brackets for fixing the equipmets on wall. |
| 27 | Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. |
| 28 | 30 mtr long |
| 29 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : |
| 30 | Stainless Steel (Grade 304) |
| 31 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : |
| 32 | 2 way - 100 mm dia M.S. Pipe |
| 33 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. |
| 34 | Supplying, installing, testing and commissioning of Copper Conductor Cables, XLPE Insulated, unarmoured IS 7098 (Part 1) marked of approved make Havells, Finolex, Polycab to the satisfaction of EIC |
| 35 | 2C x 1.5 Sqmm |
| 36 | 3C x 2.5 Sqmm |
| 37 | 4C x 4 Sqmm |
| 38 | Supply, Installation, Testing and Commissioning of 100 mm dia Bourden type, Pressure Gauge including brass isolation valve and siphon pipe having calibration of 0 - 16 Kg / cm2 |
| 39 | Providing and fixing of HOSE CABINET of Size: (600mm x 600mm x 450mm) made of 16 gauge MS sheet with 4mmthick glazed glass door i/c necessary locking arrangement suitable to accommodate 15 mtr. long hose reel pipe & branch pipe mounted on wall or raised bric platform & duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect as required. Make: Newage/ Minimax/ Omex/ Safeguard. |
| 40 | Supply, installation, testing and commissioning of ISI marked (IS:15638) portable fire extinguisher, ABC (gas pressure) type capacity 4kg with gun metal cap and nozzle and complete in all respects including initial fill and wall suspension brackets as required as per specifications. |
| 41 | Providing and fixing fire extinguisher of carbon dioxide type consisting of brand new high pressure steel cylinder bearing IS: 7285 mark and having the approval of controller of explosives Nagpur, wheel type valve bearing IS:3224 mark internal discharge tube, 1 meter long high pressure discharge hose, non conducting horn, suspension bracket, fully charged bearing IS: making fixed to wall as directed. |
| 42 | 4.5kg capacity cylinder |
| 43 | Supplying and installing of 3nos set of fire buckets of 24 gauge galvanized steel sheet, standard 9 liter capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letters \\"Fire \\" in black and gold. |
| 44 | Providing and fixing in position automatic brass ball valve in tanks With brass ball Cock with plastic ball |
| 45 | 50 mm |
| 46 | Providing and fixing in position G.I tank nipple of approved make |
| 47 | G.I tank nipple 50mm i/d Please Enable Macros to View BoQ information |
