|
| 1 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. |
| 2 | Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) |
| 3 | Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 4 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 5 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 9 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 10 | Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 11 | Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. |
| 12 | Reinforced cement concrete works in beams, suspended floors roofs having slope up to 15 degree landing , balconies, shelve, chajjas , lintels, bands, palin window sills, staircase and spiral staircase above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 . |
| 13 | Reinforced cement concrete works in beams, suspended floors roofs having slope up to 15 degree landing , balconies, shelve, chajjas , lintels, bands, palin window sills, staircase and spiral staircase above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 . |
| 14 | Reinforced cement concrete works in beams, suspended floors roofs having slope up to 15 degree landing , balconies, shelve, chajjas , lintels, bands, palin window sills, staircase and spiral staircase above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 . |
| 15 | Reinforced cement concrete works in beams, suspended floors roofs having slope up to 15 degree landing , balconies, shelve, chajjas , lintels, bands, palin window sills, staircase and spiral staircase above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 . |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form forColumns, Pillars, Piers, Abutments, Posts and Struts |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platform |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and cantilevers |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form forWeather shade, Chajjas, corbels etc., including edges |
| 21 | Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 22 | Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 23 | Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layers 19mm. Thick (1:2:4)with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thicks (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I. |
| 24 | Providing and laying vitrified Paring / Industrial tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 4457:2007, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 300x300 x 10 mm sizes. |
| 25 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 26 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 27 | Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 28 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) |
| 29 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 30 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 31 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 32 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.Take 20% for repair |
| 33 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I. |
| 34 | Supplying, fitting and fixing C.A.R.W.D. Pipe with necessary strips spikes, bends, shoes etc. Including cost of carriage, all complete, as per building specification and direction of E/I. 75mm dia |
| 35 | providing plain M.S.Reainforcement of 8mm dia. Rods as per approved TMT Fe 500 (Only paid for tata(tiscon) sail,JSPL, electrostell steel ltd. Bokaro and vizag(rinl)concrete qty |
| 36 | providing plain M.S.Reainforcement of 10 mm dia. Rods as per approved TMT Fe 500 (Only paid for tata(tiscon) sail,JSPL, electrostell steel ltd. Bokaro and vizag(rinl)concrete qty |
| 37 | providing plain M.S.Reainforcement of 12 mm dia. Rods as per approved TMT Fe 500 (Only paid for tata(tiscon) sail,JSPL, electrostell steel ltd. Bokaro and vizag(rinl)concrete qty |
| 38 | providing plain M.S.Reainforcement of 12 mm dia. Rods as per approved TMT Fe 500 (Only paid for tata(tiscon) sail,JSPL, electrostell steel ltd. Bokaro and vizag(rinl)concrete qty |
| 39 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 40 | Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. |
| 41 | Providing P.C.C (M-150) (1:2:4) in foundation with approved quality of stone Metal of grade !!! (53mm.to 22.4mm.Size) clean coarse sand of F.M. 2.5 to 3.00 inculuding screening ,shuttering, mixing cement concrete in mixer and placing in position vibrating, striking, curing ,taxes and royalty all complete as per building specification and direction of E/I |
| 42 | Providing designation 75 B Brick work in C.M.(1:6) in foundation and plinth with appro-ved quality of clean coarse sand of F.M. 2.00 to 2.5 including 10 mm thick mortar joints, cost of screening,scaffplding, raking out joints to 15 mm. depth, curing, taxes and royalty all complete as per building specification and direection of E/I(Grade-A) |
| 43 | Providing 250mm thick brick jali work in C.M. (1:8) in superstructure with designation 75A brick and approved quality of clean coarse sand of F.M. 2 to 2.5, finished with deep ruled pointing in C.M. (1:3) with sand of F.M. 1.5 on entire surface including the cost of finished the holes, screening carriage of materials, scaffolding, raking out joints to 15 mm depth, curing taxes and royalty all complete, as per approveddesign, building specification and direction of E/I. |
| 44 | Providing R.C.C. (M-200) (1:1.5:3) in Lintel & Wall band with approved quality of stone Chips (20 mm. to 6mm.Size) graded and clean coarse sand of F.M. 2.5 to 3.00 inculuding screening, shuttering,mixing cement concrete in mixer and placing in position vibrating, striking,curing,(but excluding the cost of rein forcement) taxes and royalty all complete as per building specification and direction of E/I. |
| 45 | Providing R.C.C. (M-200) (1:1.5:3)) in Slab with approved quality of stone Chips (20mm. to 6mm.Size) graded and clean coarse sand of F.M. 2.5 to 3.00 inculuding screening, shuttering,mixing cement concrete in mixer and placing in position vibrating, striking,curing, (but excluding the cost of rein forcement) taxes and royalty all complete as per building specification and direction of E/I. |
| 46 | Providing 12mm cement plaster in cm (1:4) with 1.5mm punning with clean coarse sand of F.M. 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specifica- tion and direction of E/I |
| 47 | Cattaige of MaterialsBricks |
| 48 | Sand Local |
| 49 | Sand Coase |
| 50 | Stone Chips |
| 51 | Stone Metal |
| 52 | Wiring for light point/ fan point/exhaust fan point / call bell point witle 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size PVC/M.S box etc. as required. |
| 53 | Wiring for light/power plug with 2x 4 sq.mm FR PVC insulated, copper conductor,single core cable in and surface/recessed PVC conduitalong with 1 No. 4 sq mm FR PVC insulated copper conductor single core cable for loop earthing as requried. |
| 54 | iring for circult fsubmain wiring with the following size of PVC Insulated, coppar conductor single core cable in surface/recessed PVC conduit as required: 2 2x1.5 sq.mm.+1x2.5 sq mm. |
| 55 | 2x2.5 sq.mm.+1x2.5 sq mm(for switch board/5A Switch Socket+AC (DU) |
| 56 | 2X6 sq mm+1X6 sq mm |
| 57 | S/F ceiling rose: Supplying and fixing 2 pin 5A of ceiling rose on the existing junction box/wooden block including connection etc as required. |
| 58 | S/F brass battan / angle holder including connection etc as reqd. |
| 59 | S/F of following sizes of PVC conduit alongwith the accessories in surface/recess including cutting the walld making good the same in case of recessed condi as required 20 mm PVC |
| 60 | 25 mm PVC coduit. |
| 61 | Supplaying and fixing following piano type switch / socket on the existing switch box / cover including connection etc. as reqd 5/6 amps switch |
| 62 | 5/6 amps socket outlet |
| 63 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as reqd. 126 mm x 277 mm x 61 mm deep |
| 64 | Supplying and fixing of following way single pole & neutral, sheet steel MCB distribution board 240 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder pointed including earthing etc. as reqd. 8 way double door. |
| 65 | Pro.and fixing maie ended 15mm.dia. Brass bib cock of approved quality (wt,not less than350gms.) with extra soacet all compere as per specification and direction of E/1. |
| 66 | Providing and fixing brass stop cock. 15mm dia. |
| 67 | Providing and fixing G.M. non return Horizontal/Vertical type of approved qality as per specification and direction of E/I Horizontzl-32mm dia. |
| 68 | 25mm dia. |
| 69 | Cutting chhajja or corince for laying G.L.Pipe and restoring the same with R.C.C.(1:2:4) brick work in C.M.(1:4) as per specification and direction of F/I |
| 70 | Making holes in walls for laying G.l.pipe and restoring the same after pipe laying as per specification and direction of E/1125mm thick wall |
| 71 | 250mm thick wall |
| 72 | Supplying fitting and fixing the following items complete with all materials as per specification and direction of E/I. Mirror-(300x450mm) |
| 73 | C.P.brass tower rail |
| 74 | C.P.brass soap dish container medium quility with screw and hings.etc. |
| 75 | Supplying fittings and fixing viterios white glazed earthen ware LW Cof parry Hindustan or any other 1.S.S.approved make with 100mm 11C) (09 trap 15litres C.I. pull and let go flushing cistern of names or ohters 1.S.S.equivelent make,complete with all fittingsC.Lor CC brakets 12mm alkathene/P.V.C.telescopic flush, pipe about 2M long with one brass coupling and clamps G.L.chain and pull including supplying and fixing a pair or viterous white glazed eartenware footrest to be fixed in floor 15mm C1. body brass spindaly stope cock of wight not less than exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc all complete as per specification and direction of F/1. 580rum long-with 12.5 lit.low level PVC cistern. |
| 76 | Supplying filting and fixing 40 mm highb viterous white glazed earthen E.W.C. with 'P trap of party hindustan or any other approved 155 make including supplying and fixing 15 litres C.1. handle and RS orbracket with telescople flush pipe with brass coupling and plumbers joints spindle stope cock of approved quality weight not less than 450 grams 15 nim pvC alkathene pipe 45 cm. long with brass coupling at both ends and white/back plastic soild state seal and lead of commander/cuckoo or other I.S.S. make with hinges of screw etc painting pipe and cistern etc. |
| 77 | Supplying fitting and fixing viterous white glazed ware wash hand basin of parry or hindustan or any other I.S.S. approved make supported on pointed C.1. or R.S. brackets 32 m C.I. brass waste 15 mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grms. 32 mun P.V.C waste pipe 750 mm long with brass coupling at one end and making, plumber joints etc. all complete as per specification and direction of E/ |
| 78 | Supplying fitting and fixing flat back or angular, lipped front viterous white glazed earhten ware urinal of Hindustan parry or any other approved I.S.S.make with 5 litre capacity C.L.automatic flushing cistern for any other 1.S.S. approvd make with all fittings with C.I. or R.S.bracket, standard size G.I.flush pipe with fittings clamps, 15mm,C.I.body brass spindle stop cock of approved quality weight not less than 400 grims. 15 mm P.V.C. waste pipe 450 mm long with brass coupling at both end and doing plumbing joints including painting coat of red oxide cuting wall and flouwhite glaoor making good the same etc. all complete as per specification and direction of E/I. |
| 79 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, ovtlet and overflowpipes but without fittings and the base sup support for tank. |
| 80 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge 25 mm nominal outer dia pipes. |
| 81 | 32 mm nominal outer dia pipes |
| 82 | Providing and fixing Chlorinated Polyvinyl Chlorid (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing, This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same includeing testing of joints complete as per direction of Engineer in Charge. 15 mm nominal dia Pipes |
| 83 | 20 mm nominal dia Pipes |
| 84 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to 15: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 1 75 mm |
| 85 | 110 mm |
| 86 | Supplying the follwing bathroom fittings all complete (VIP) Angular Stop cock/2 way Bib cock |
| 87 | Telephonic Shower with flexible pipe/ health Façade |
| 88 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door 75x75x75 mm |
| 89 | 110x110x110 mm |
| 90 | 75 mm bend |
| 91 | 100 mm bend |
| 92 | Goods & Service Tax (G.S.T.) - |
| 93 | Labour Cess - Please Enable Macros to View BoQ information |
