|
| 1 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-A)and disposal of excavated earth as obtained to a distance up to 50mts. Including all lift, levelling, ramming the foundation trenches, removing root of treese, shrubs all complete as per approved design, building specification and direction of E/I. |
| 2 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-A)and disposal of excavated earth as obtained to a distance up to 50mts. Including all lift,levelling,ramming the foundation trenches, removing root of treese, shrubs all complete as per approved design, building specification and direction of E/I. |
| 3 | Providing coarse clean Sand filling in foundat. ion trenches or in plinth including ramming and waterind in layers not exceeding 150mm. Thick with all leads including cost of materials, labour, royalty and taxes all complete as per building specification and direction of E/I |
| 4 | Providing designation 75 B Brick flat soling joints with local sand including cost of water- ing taxes and royalty all complete as per building specification and direection of E/I |
| 5 | Providing P.C.C (M-150) (1:2:4) in foundation with approved quality of stone Metal of grade !!! (53mm.to 22.4mm.Size) clean coarse sand of F.M. 2.5 to 3.00 inculuding screening ,shuttering, mixing cement concrete in mixer and placing in position vibrating, striking, curing ,taxes and royalty all complete as per building specification and direction of E/I |
| 6 | Providing R.C.C. (M-200) (1:1.5:3) in Column with approved quality of stone Chips (20mm.to 6mm.Size) graded and clean coarse sand of F.M. 2.5 to 3.00 inculuding screening, shuttering,mixing cement concrete in mixer and placing in position vibrating, striking, curing,(but excluding the cost of reinforcement) taxes and royalty all complete as per buildingspecification and direction of E/I(Grade-A) |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts |
| 8 | Providing R.C.C. (M-200) (1:1.5:3) in Tie beams of & all types Beam, with approved quality of stone Chips (20mm.to 6mm.Size) graded andclean coarse sand of F.M. 2.5 to 3.00 inculuding screening,shuttering,mixing cement concrete in mixer and placing in position vibrating, striking,curing,(but excluding the cost of reinforcement) taxes and royalty all comp.as per building specification and directionof E/I. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, Tie beams etc. for mass concrete |
| 10 | Providing designation 75 B Brick work in C.M.(1:6) in foundation and plinth with appro-ved quality of clean coarse sand of F.M. 2.00 to 2.5 including 10 mm thick mortar joints, cost of screening,scaffplding, raking out joints to 15 mm. depth, curing, taxes and royalty all complete as per building specification and direection of E/I(Grade-A) |
| 11 | Providing 250mm thick brick jali work in C.M. (1:8) in superstructure with designation 75A brick and approved quality of clean coarse sand of F.M. 2 to 2.5, finished with deep ruled pointing in C.M. (1:3) with sand of F.M. 1.5 on entire surface including the cost of finished the holes, screening carriage of materials, scaffolding, raking out joints to 15 mm depth, curing taxes and royalty all complete, as per approveddesign, building specification and direction of E/I. |
| 12 | Providing 50 mm. thik Damp Proof Coarse with cement concrete (M-150) (1:2:4) with approved quality of stone Chips (20mm.to 6mm.Size) graded and clean coarse sand of F.M. 2.5 to 3.00 inculuding screening, shuttering,mixing cement concrete in mixer with 5% cico or any other approved water proofing compound and placing in position striking,curing,taxes and royalty allcomplete as per bldg.specification and direction of E/I.(Grade-A) |
| 13 | Providing designation 75B Brick work in C.M.(1:6) in Super Structure with approved quality of clean coarse sand of F.M.2.00 to 2.5 including 10 mm thick mortar joints,cost of screening,scaffplding, raking out joints to 15 mm. depth, curing, taxes and royalty all compl-ete as per building specification and direection of E/I(Grade-A) |
| 14 | Providing R.C.C. (M-200) (1:1.5:3) in Lintel & band with approved quality of stone Chips (20 mm. to 6mm.Size) graded and clean coarse sand of F.M. 2.5 to 3.00 inculuding screening, shuttering,mixing cement concrete in mixer and placing in position vibrating, striking,curing,(but excluding the cost of rein forcement) taxes and royalty all complete as per building specification and direction of E/I. |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 16 | Providing R.C.C. (M-200) (1:1.5:3) in Chajja with approved quality of stone Chips (20mm.to 6mm. Size) graded and clean coarse sand of F.M. 2.5 to 3.00 inculuding screening,shuttering ,mixing cement concrete in mixer and placing in posit ion vibrating, striking, curing,(but exclud ing the cost of reinforce ment taxes and royalty all com plete as per building specification and direction of E/I. |
| 17 | Providing R.C.C. (M-200) (1:1.5:3) in Beams of all types, with approved quality of stone Chips (20mm.to 6mm.Size) graded andclean coarse sand of F.M. 2.5 to 3.00 inculuding screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, striking,curing,(but excluding the cost of reinforcement) taxes and royalty all comp.as per building specification and directionof E/I. |
| 18 | Providing R.C.C. (M-200) (1:1.5:3) in Solid Roof Slab with approved quality of stone Chips (20mm. to 6mm.Size) graded and clean coarse sand of F.M. 2.5 to 3.00 inculuding screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, striking,curing, (but excluding the cost of rein forcement) taxes and royalty all complete as per building specification and direction of E/I. |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 20 | Providing and fixing fan hook of 16mm dia. M.S.bar and 1m long,bend to required size and shape, placed in position and fixed in R.C.C. Beam/Slab at the time of casting all complete as per specification and direction of E/I |
| 21 | Providing 12mm water proof cement Plaster in cm (1:3) in top of roof with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I |
| 22 | Providing 6mm cement Plaster in cm (1:4) in Ceiling with clean coarse sand of F.M. 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I |
| 23 | Providing 12mm cement plaster in cm (1:6) in both side wall with clean coarse sand of F.M. 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specifica- tion and direction of E/I |
| 24 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 25 | Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm . |
| 26 | Providing 12mm thick cement paster in cm (1:4) with clean coarse sand &1.5mm cement punning including curing, carriage of waterwith all leads and lifts as per building specification and direction of E/I |
| 27 | Supplying fitting and fixing 20 gauge G.C.I. Sheet (Door & Window)gate on M.S.angle frame of size 60*60*6mm, including cost of fabrication providing necessary locking arrangements worth haskel and domny duly fixed in C.C. (1:2:4) blocks of required size, applying a prim ing red lead paint over steel work,taxes all com.as per specification and direction E/I. |
| 28 | Supplying fitting and fixing M.S. grill of 20*6 mm M.S.flats as per approved deesign and drowing ,properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction E/I. |
| 29 | Provding two coats of Snowcem of approbved shade and make over a coat of cement primer on new surface including preparing the plasterd surface smooth with sand paper, scffolding, curing and taxes all complete as per building specification and direction of E/I. |
| 30 | Provding two coats of synthetic enamel paint over a primer coat of red lead paint of approved shade and make over new steels surface including preparing the new steel surface after cleaning,removing dircet scales,smokes, grese and cleaning the surface taxes and royalty all complete as per building specification and direction of E/I(Mode of mea surement-Area shall be multiplied by the co-efficient as indicated in building specifications) |
| 31 | Supplying fitting and fixing C.A.R.W.D. Pipe 75mm dia with necessary strips,spikes,bands,shoesetc including cost of carriage all complete as per building specification and direction E/I. |
| 32 | providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.(a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL) |
| 33 | Add Carriage Cost MaterialsBricks |
| 34 | Stone Chips |
| 35 | Cement and Steel |
| 36 | Less cost of Kin burnt Bricks 75B |
| 37 | Drilling in all kinds of soil and rock in rural area for installation of pump with D.T.H. rigs all complete including supplying all materials, Labour tools, drilling rig, air compressor and equipment as well as fuel, lubricants all complete job as per building specification & direction of E/I.(a) up to 30 depth bellow G.L. |
| 38 | (b) Beyond 30M up to 75 M |
| 39 | Supplying and sering 125mm dia U.P.V.C. casing pipe to protecting the earth in bore hole |
| 40 | Supplying and sering 125mm dia cap over 125mm dia casing pipe to protecting the bore hole well. |
| 41 | Cleaning flushing and developing of drilled well to give cleaned clear water. |
| 42 | Istallation of pump set and electrification work supplying and commissioning of 1.5.H.P. submersible pump of I.S.I. marked suitable for 125x100 mm dia tub well. |
| 43 | Earth work in excavation for laying of different type of size of G.I. pipe to connection of motor pump up to over head tank. |
| 44 | Supplying all materials and labour and tools, equipment for laying G.I. piper in trenches 25 mm dial |
| 45 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 320 mm dia |
| 46 | Providing & Supplying CPVC pipe fitting 15mm dia |
| 47 | 25mm dia |
| 48 | 32mm dia |
| 49 | Supplying & Fitting & GI fixing --------------do--do--all comp job Elbow15mm dia |
| 50 | 25mm dia |
| 51 | 32mm dia |
| 52 | TEE (Plain)15mm dia |
| 53 | 25mm dia |
| 54 | 32mm dia |
| 55 | REDUCING SOCKET25mm dia |
| 56 | 32mm dia |
| 57 | NIPPLE15mm dia |
| 58 | 25mm dia |
| 59 | 32mm dia |
| 60 | UNION SOCKET25mm dia |
| 61 | 32mm dia |
| 62 | REDUCING TEE25mm dia |
| 63 | BENDS15mm dia |
| 64 | 25mm dia |
| 65 | 32mm dia |
| 66 | Providing and Fixing GM non-return valve (horzontal & Vertical type ) do---do--- 32mm dia |
| 67 | Providing and Fixing Brass stop Cock do---do--- 15mm dia |
| 68 | Poleythene water stroge tank |
| 69 | Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S.approved make with 100 mm H.C.I. ‘p’ trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S.equivalent make, complete with all fittings,C.I. or C. C.brackets 32 mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15 mm C.I. body brass spindle stope cock of weight not less than 50 grms, 15 mm P.V.C. connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. (c) With 10 lit. low level PVC Cistem |
| 70 | Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l. (3.2.5) |
| 71 | Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l. (3.2.5) |
| 72 | Providing and fixing male ended 15 mm dia brass bib cock of approved quality (Wt. not less than 350 gms.) with extra socket all complete as per specification and direction of E/I |
| 73 | Wiring for light/fan point/exhaust fan point/call bell point with 1.5 sq.mm. FRPVC insulated copper conductor single core cable in surface/recessed conduit with piano type switch phenolic laminated sheet suitable size M.S. box and earthing the point with 1.5 sq.mm. FRPVC insulated copper conductor single core cable etc. as required.Group - A |
| 74 | S/F following piano type switch/socket on the existing switch box/cover including connection etc.as required. |
| 75 | S/F PVC/GI boxes Suppling and fixing of following sizes of PVC/GI box on sufrface recess with suttablle size of phenolic laminated sheet cover in fornt including painting etc as required.4''X4'' |
| 76 | 4''X7\\" |
| 77 | 4\\"X12\\" |
| 78 | 3 mm thick phentlic laminated sheet |
| 79 | Wiring for Curcuit submain wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface of recessed PVC sonduit as required.2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire |
| 80 | 2 x 4.0 sq.mm + 1 x 4 sq.mm earth wire |
| 81 | 2 x 10 sq.mm + 1 x 6 sq.mm earth wire |
| 82 | S/F brass vatton/Angle Holder including connection etc. as required. |
| 83 | 9/10 watt LED bulb |
| 84 | 15/16 watt LED bulb |
| 85 | electronic step fan regulator |
| 86 | S/F 3 pin 5 amp ceiling rose on the existing junction box wooden block including connection etc. as required. |
| 87 | S/F the following way single pole and nutral sheet steel M.C.B. D.B. consumer unit 240V on surface/recess complete with tinned copper busbar, nutral busbar earth plate dinbar hinged front acrylic cover fro MCB knob datachable gland plate inter connection phosphatied and powder painted including earthing etc. as reuired (Without MCB/RCCB/Isolator).40 amps |
| 88 | Supply of 48\\" (1200mm) AC ceiling fan. |
| 89 | I.T.C of ceiling fan including wiring the down rods of standard length (Up to 30 cm) with 1.5 sq.mm FRPVC with 1.5 sq.mm. FRPVC insulated copper conductor single core cable etc. as required. |
| 90 | Earthing with copper earth plate 600X600X3 mm thick (with charkol or coke and slat) |
| 91 | 63 amps TPN switch disconnector fuse unit with ISI marked HRC fuses |
| 92 | Goods & Service Tax (G.S.T.) - |
| 93 | Labour Cess - Please Enable Macros to View BoQ information |
