|
| 1 | Earth work in all kinds of soil including rough dressing and levelling the bed. |
| 2 | Sand filling in foundation and plinth including cost of all material, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants etc. complete as per the driection of the Engineer in Charge. (linear measurement will be taken and quantity will be calculated on standard weight for all heights). |
| 3 | Filling area with excavated earth materials including labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants etc. complete as per the driection of the Engineer in Charge. |
| 4 | Conveyance of excavated earth materials by mechanical means including 5km lead complete including all labour, materials & royality etc. complete as per direction of EIC. |
| 5 | Providing & laying plain cement concrete (1:4:8) using 4cm size metal etc. complete including all labour, materials & royality etc. complete as per direction of EIC. |
| 6 | C:C: (1:2:4) using 12 mm to 20 mm size H.G. stone chips including the cost of all materials labour carriage, royalty etc complete. |
| 7 | Providing lifting, hoisting and laying R.C.C. of M-25 Grade to base of columns and footing, columns, beams, plinth band, lintels, chajja, shaft, fins, roof slabs, balconies, stair cases, parapets, window sills, lofts, railing, jally, copping or in places as shown in the drawing for all floors with 20mm and down graded size black hard crusher broken ships of approved quality from approved quarry including mixing and vibro compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth (if required providing plaster with cement mortar (1:4) wherever necessary without any extra cost) including rigid smooth centering and shuttering, scafolding, watering (excluding reinforcement bars) and curing for required period including cost of all material, labour, conveyance, royality, loading and unloading, sundries, tools and plants etc. complete as per the direction of the Engineer in Charge. a)Base Footing |
| 8 | plinth beam Head room |
| 9 | Column in s/s |
| 10 | stair case |
| 11 | Lintel band |
| 12 | Chajja( at lintel level & window sill level ) |
| 13 | Roof Beam |
| 14 | Roof slab |
| 15 | First Floor (a) Column in s/s |
| 16 | (b) Lintel band |
| 17 | (c) Chajja( at lintel level & window sill level ) |
| 18 | (d) Roof Beam |
| 19 | (e) stair case(i/s) |
| 20 | (f) Roof slab |
| 21 | Second floor (a)beam |
| 22 | (b)column |
| 23 | Labour charges for cutting, bending, binding and tying the grill including the cost of M.S. rod. |
| 24 | First floor with (head room) |
| 25 | Second floor h.room |
| 26 | Fly ash brick masonary of size 25cmx12cmx8cm and crushing strength not less than 75 kg/cm2 in C.M.(1:6) in F&P including cost of all material, labour, conveyance, royality, loading and unloading, sundries, tools and plants etc. complete as per the direction of the Engineer in Charge. (FOUNDATION) |
| 27 | Fly ash brick masonary of size 25cmx12cmx8cm and crushing strength not less than 75 kg/cm2 in C.M.(1:6) in Super structure including cost of all material, labour, conveyance, royality, loading and unloading, sundries, tools and plants etc. complete as per the direction of the Engineer in Charge. (SUPERSTRUCTURE) |
| 28 | FIRST FLOOR |
| 29 | SECOND FLOOR Head room |
| 30 | Providing 6 mm thick cement plaster in cm (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment including cost of all materials, labour, conveyance, loading and unloading, taxes, royalties, sundries, tols and plants etc. complete as per the driection of the Engineer in Charge. |
| 31 | FIRST FLOOR |
| 32 | Providing 12mm thick cement plaster in cm (1:6) on the rough surface/ plumbed surface of masonry racking out of joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level and providing grooves as shown in the drawning including cost of all material, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants etc. complete as per the driection of the Engineer in Charge. |
| 33 | FIRST FLOORouter side |
| 34 | SECOND FLOOR |
| 35 | Providing 16mm thick cement plaster in cm (1:6) on the rough surface of masonry walls for all floors including racking and joints, scrapping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level and providing grooves as shown in the drawning including cost of all material, labour, conveyance, loading and unloading, taxes, royalties, sundries, tools and plants etc. complete as per the driection of the Engineer in Charge. (inside) |
| 36 | FIRST FLOOR |
| 37 | Second floor |
| 38 | supplying fitting and fixing of vertrifed tile in floors of size 600mm x 600mm(plain) of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 Course sand) and filling joints with white cement of approved quality including cost , conveyance, taxes, cost of all labour etc. complete. (Data for 10 sqm) |
| 39 | first floor |
| 40 | Fixing tiles in dados, skirting and risers of steps on 12mm C:P (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. |
| 41 | FIRST FLOOR |
| 42 | white washing two coat over plastered suface (Data for 93 m2) |
| 43 | white washing two coat over plastered suface (Data for 93 m2) |
| 44 | Second floor |
| 45 | Priming one coat with any approved primer including the cost of labour & primer. |
| 46 | Primar two coat F.FLOOR |
| 47 | Primar two coat S.FLOOR |
| 48 | Painting two coats over a coat of priming over new wood work & Iron work with the cost of primer & paint. |
| 49 | FIRST FLOOR |
| 50 | Wall painting two coats with plastic emulsion paint with cost of paint. |
| 51 | FIRST FLOOR |
| 52 | S.FLOOR |
| 53 | Finishing wall surface with two coats of weather coat over a coat of cement priming including cost and conveyance of all materials, labour T&P, hire charges of machine, all taxes etc all completes in all respects as per the direction of Engineer charges. |
| 54 | FIRST FLOOR |
| 55 | S.FLOOR |
| 56 | Supplying, fitting & fixing of Stainless steel of 304 grade in hand railling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe beacing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. requered for the complete in all respect. |
| 57 | Providing fifting and fixing of Al. door with anodized Al. door section No.9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section as 9221 and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by meand of jointing angle No. 1855 including all cost of labour, T&p, hire charges of drilling machine, labour charges etc.complete. |
| 58 | Supplying ,fitting and fixing of Openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame shutters and all fitting and fixtures |
| 59 | Supplying fitting fixing of Un-plasticcide Poly Vinyl Chloride(UPVC) (FENESTA/NCL VEKA LTD.) Three Track-Three Panel slidind Window-60 Series duly Manufactured using UPVC reinforced profiles of 108mm x 45mm x 2.5mm for outer frames and window sash of 39mm x 58mm 2.5mm capable of mounting single galazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm perfabricated & welded through fusion welding the window frame shall be with 6mm thick clear thougherned glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistance and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTMD 638-14, EN-477-95 and other applicable codes and standards. |
| 60 | F.FLOOR |
| 61 | Supplying fitting fixing of Un-plasticcide Poly Vinyl Chloride(UPVC) (FENESTA/NCL VEKA LTD.) Ventilator Series duly Manufactured using UPVC reinforced profiles of 108mm x 45mm x 2.5mm for outer frames and window sash of 39mm x 58mm 2.5mm capable of mounting single galazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm perfabricated & welded through fusion welding the window frame shall be with 6mm thick clear thougherned glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistance and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTMD 638-14, EN-477-95 and other applicable codes and standards. |
| 62 | Supplying of M.S. Grill made out of structural steel, flats, plates, bars confirming to IS for windows, ventilators etc. as per drawing and design, fixed to walls with clamps including priming 1 coat with all kdamages in walls and floors etc. including cost of all materials, labour, conveyance, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants etc.as per the direction of the Engineer in Charge. |
| 63 | FIRST FLOOR |
| 64 | Supplying fitting fixing of M.S Tubullar roffing member approved quality in proper position including cost of all materials labour T&P etc.complete |
| 65 | 6mm thick A.C.Sheet flat ceiling fitted and fixed complte including cost of A.C.Sheet and battens 5cm x 3cm x 1cm. (Data for 9.30M2) |
| 66 | 2.50 cm thick grading concrete using C.C. (1:2:2) on roof slab with 6mm sizes down graded H.G. chips on new work (For 1 Sqmt)G.FLOOR |
| 67 | F.FLOOR |
| 68 | Fixing of display board |
| 69 | Tree with Tree guard |
| 70 | PH Fitting Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor upvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.In Ground Floor40mm dia UPVC ASTM pipe (sch-80) |
| 71 | 50mm dia UPVC ASTM pipe (sch-80) |
| 72 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Joints all complete as per specification and direction of the Engineer in charge. 20mm dia CPVC pipe |
| 73 | 25mm dia CPVC pipe |
| 74 | 32mm dia CPVC pipe |
| 75 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.In Ground Floor250mm thick wall |
| 76 | In Ground Floor |
| 77 | In Ground Floor |
| 78 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing GI pipes / PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. |
| 79 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. |
| 80 | Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge.(C.P.fittings are Jaquar make) 15 mm dia CP two way Bib cock (Jaquar)CON-CHR-041KN |
| 81 | 15mm dia CP Health foucet (Hindware F160013CP) |
| 82 | 15 mm dia CP Long body Bib cock(Jaquar)CON-CHR-107KN |
| 83 | 15mm dia CP angle stop cock(Jaquar)CON-CHR-053KN |
| 84 | 20mm dia CP concealed stop cock(Jaquar)CON-CHR-083KN |
| 85 | Pillar cock Long neck with Aerator (Jaquar)CON-CHR-021KN |
| 86 | 25mm dia brass or gun metal fullway valve(Shakti Make) |
| 87 | 40mm dia brass or gun metal fullway valve(Shakti Make) |
| 88 | 32mm dia brass or gun metal fullway valve(Shakti Make) |
| 89 | 15mm dia CP flange |
| 90 | 15mm dia CP extension piece |
| 91 | Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge. 10 litres capacity pvc low level cistern with 32mm dia CP long flush bend Slimline white |
| 92 | Supplying all materials, labour, T&P and fitting and 1000 liters capacity PVC water storage tank complete as per specification and direction of the Engineer in charge. |
| 93 | Supplying all materials, labour, T&P and fitting and fixing PVC soil waste ventilating pipes and fittings of the following with suitable clamps as per specification and direction of the Engineer in charge100mm PVC Pipe |
| 94 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 95 | 75mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 96 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 97 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 98 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 99 | 110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 100 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 101 | 100mm dia Cowl |
| 102 | 125mm dia grating |
| 103 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 104 | 75mm dia Pipe |
| 105 | 75mm dia Plain Bend |
| 106 | 75mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 107 | Clamp |
| 108 | Supplying all materials, labour, T&P and fixing vitreous china water closet, European water closet and P trap duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet European pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge. European pan (Parryware / Hindware make ) |
| 109 | Supplying all materials, labour, T&P and fixing under counter top wash basin with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge. 560x450mm size under counter top wash hand basin |
| 110 | 600mmx450mm size B.E mirror (Jaquar make) |
| 111 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.25mmx600mm long CP towel rail |
| 112 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. CP soap holder Please Enable Macros to View BoQ information |
