|
| 1 | CIVIL WORKS:Dismantling G.C.I. or A.C sheet roofing after carefully removing the bolts and nuts including stacking of he materials for reuse and removing the debris with in 50m lead. Ceilling Meeting hall |
| 2 | Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep stacking the useful materials for reuse and removing the debris within 50m lead. Meeting Hall wall panneling |
| 3 | Removing old tarfelt from roof including all labour with T&P required for the work etc. complete. Portico |
| 4 | Removing old lime or cement plaster from walls including ranking out joints 12mm deep (1/2 inch) and removing the debris with in 50m lead including all labour T&P etc complete. Patch |
| 5 | Dismantling and removing 2.5cm thick grading concrete including stacking the useful materials for reuse and removing the debris with in 50m lead per 1Sqm. Portico |
| 6 | Providing 2.5 cm ( 1 inch ) thick grading concrete (1:2:2) using 4.7mm size hard black crusher broken granite chips of approved quality and from approved quarry including hoisting,lowering laying and compacting concrete watering curing including cost and conveyance of all materials and etc with all labour and T and P required for the work complete including side shuttering . Portico |
| 7 | Providing and laying water proofs with polymeric bituminous membrane (Plastic felt) of 2.25Kg/Sqm and 2.0mm thickness consisting of layers having center core of 20 microns thermoplastic high molecular high density polyethylene H.M.H.D.P.E. film of grade 2504 including priming the surface with bituminous primer @ 0.3 Kg/Sqm providing a coat of hot blown bitumen of 1.32 kg / Sqm, applying and laying plastic felt membrane with 10 c.m overlap adhered to blown bitumen of 85/25 or 90/15 grade and covered with a layer of hot blown bitumen @ 1.2Kg/Sqm etc complete including cost, conveyance,, of all materials, all labour, T&P etc complete. Portico |
| 8 | Fly ash brick 25cmx12cm x8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in super structure per cum. Parapet |
| 9 | 16 mm C.P (1:6) Over brick stone masonary. Patch, Parapet |
| 10 | Supplying,fitting and fixing M.S . Window and door shutters etc. complete80x40 square pipe 6 nos. Truss Post50x50 square pipe Purlin30x30x10 MS Plate20mm Threat cut rod with bolt 25x25 wind tie80x40 square pipe 4 nos. TrussPost50x50 square pipe Purlin30x30x10 MS Plate20mm Threat cut rod with bolt25x25 wind tieLader-1 (40x40) MS Square barVertical no.Support bar 25x25for step 0.25+0.35 18x5= 90 18x2=36 |
| 11 | Hosting laying joint and Trusses and placeing in position including labour and T and P require for the work etc. complete as directed by E.I.C. |
| 12 | Supplying ,fitting and fixing of Tata make ( Durashine) colour tin sheet or equivalent , heat resistant specially colour coated sheet for roofing including cost,conveyance of all materials, labour and T and P require for the work etc. complete as directed by E.I.C. shed- 1 and 2 Joint |
| 13 | Providing fitting and fixing Gypsum Board ceilling with aluminum anodised I section No. 3215 with 2 feet -0 center to center I section No. 1705 up to 15 micron on 4 walls to be fixed by mans of steel screw and P.V.C plug and Aluminium gird from ceilling etc. complete including cost conveyance of all materials labour T and P etc complete. Training Hall Drop Cornice |
| 14 | Finishing wall surface with cement based wall Putty ( water based ) of approved make and finished smooth and even surface to receive painting including cost of scafflolding staging charges with cost of all materials taxes, labour T and P etc complete. Training Hall , Ceilling |
| 15 | Wall painting Two Coat with P.E Paint over a coat of primer including cost of all materials, labour and T and P require for the work etc. complete as directed by the E.I.C Training Hall Ceilling Front RoomBack side hall Ceilling Toilet |
| 16 | Wall painting Two Coat with Weather coat over a coat of primer including cost of all materials, labour and T and P require for the work etc. complete as directed by the E.I.C. Parapet |
| 17 | Painting Two Coat with Enamel paint over a coat of primer to Door and window including cost of all materials, labour and T and P require for the work etc. complete as directed by the E.I.C. DoorWindowPortico grillTrussPost |
| 18 | Cement concrete of proportion (1:2:4) using 12mm size clean hard black crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm (6 inch) thick to the required level ramming, watering and curing etc. complete including cost and conveyance of all materials with and royalties and all labour with T and P required for the work etc. complete including dewatering if required For shed post fixing |
| 19 | Carriage of dismentaling items 5km lead etc complete. |
| 20 | EI WORKS:Recessed wiring to light points/fan points/ Exhaust fan/ call bell point with 1.5 mm2 FRLS PVC insulated SC multistrand copper conductor of ISI marked ( Finolex/ Polcab/KEI/Anchor) with 20mm dia non- metalic PVC flexible conduit ( Make-AKJ/KINJAL/POLYCAB/ANCHOR ) WITH 5/6 aMP. 250 V modular switch ISI marked and ceeling rose of ISI marked ( make Anchor- Roma Urban / Legrand myrius /Schneider opale / Crabtree Athena/ L and T Engleze ) mounted an modular G.I. box with modular base and cover of suitable size ( Make Anchor-Roma Urban/ Legrand myrius/Schneider opale /Crabtree Athena/ L and T Engleze) , with 1.5 sq. mm FRLS PVC insulated single core multistrand Cu. conductor as earth wire including all accessories and connection. as per direction of Engineer -in- charge ( Make of wire Finolex/L and T/ Anchor /KEI/Polycab/V- Guard)Group-A. |
| 21 | Group-B |
| 22 | Group-C .( group control 3 in 1 for ceilling light ) |
| 23 | Supply and fixing of 6 Amp 3 pin modular socket with 6 Amp modular switch on existing board. ( make Anchor- Roma Urban/Legrand myrius/Schneider opale/Crabtree Athena/ L and T Engleze.) |
| 24 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 and 15/16 A modular socket uotlet and 15/16 A modular switch, connections etc. as required. ( Make Anchor-Roma Urban/ Legrand myrius/Schneider opale / Crabtree Athenal / L and T Engleze.) |
| 25 | Supply and fixing of single pole and neutral sheet steel. MCB distribution board consumer unit 240V surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnection , phosphate and powder painted including earthing etc. as required ( But with out MCB /RCCB/ ISOLATOR) Make-L and T / Legrand/ Schneider/ABB ) 12 way double door |
| 26 | Supply and fixing of 5 amp to 32 amp rating 240V \\"C\\" series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required . ( Make-Legrand / L and T/ Schneider) (a) 63 Amp 4 Pole MCB |
| 27 | (B) 6 Amp rating to 32 Amp (SP) MCB |
| 28 | Recessed wiring to submain in the following sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked conforming to IS -694/1990 in the following mm dia non-metalic heavy duty flexible conduit 1.6mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required. ( Make of wire Finolex/ KEI/Polycab / L and T / Anchor)(a) 1x1.5 mm2 for inverter wiring . |
| 29 | (b) 2x2.5 mm2+ 1x1.5 mm2 . In 20mm dia |
| 30 | © 2x4 mm2 + 1x 1.5 mm2 in 20 mm dia |
| 31 | (d) 4x6 mm2 + 2x 2.5 mm2 in 32mm dia |
| 32 | S/F of 1200mm High speed Ceiling fan, Heavy Duty, Durable, copper winding, Aluminium blade ( ISI mark ) ( Usha Striker// Cromton AURA/ Havells SPARK Deco/ Bajaj Elegance Ivory make 0 Orient Qusar ornamental. Rate Rs. 2637.00 Fixing with all materials 320.00 2957.00 |
| 33 | S/f . Of 1x18 Wt . LED tube light fiting ( Philips/Panasonic/ Havels ) make. |
| 34 | S/f of 45 Wt. LED street light fittings complete with G.I Barcket ( Philips/ Panasonic / Havels ) make. |
| 35 | PH WORKS:Supplying all materials, labour, T and P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS: 15778 and G.I pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor , testing all complete as per P.H. specification and direction of Engineer-in-charge. 25mm dia PVC ASTM pipe ( sch-80) |
| 36 | Supplying all materials, labour T and P and fitting and fixing brass / CP fittings of the following nominal bore with supply of all jointing materials including cost and conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and dierection of the Engineer-in- charge. 15mm dia CP angle stop cock ( Con-CHR-053KN jaquar make) |
| 37 | 15mm dia CP two in one bib cock ( Con-CHR-041 KN Jaquar make ) |
| 38 | 15mm dia CP Bib cock (Con- CHR -047KN Jaquar make) |
| 39 | 25mm dia brass full way valve ( Shakti make) |
| 40 | 32mm dia brass full way valve ( Shakti make) |
| 41 | 15mm dia CP Health faucet ( Con-ALD-MCH-573 Jaquar make) |
| 42 | 125mm CP grating |
| 43 | 15mm size C.P. flange |
| 44 | Supplying all materials, labour , T and P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS: 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc.including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height instaging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work,RCC slab of size 1.60mx1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering, watering , curing , cost of all materials, conveyance of all materials to worksite, payment of royalty, all taxes etc. all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge. 1000 liters capacity PVC water storage tank. |
| 45 | Supplying all materials, labour, T and P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I .Pipes and fittings/P.V.C. pipes and fittings including watering, curing, cost and conveyance of all materials to worksite, payment of royality,taxes etc. all complete as per direction of Engineer-in-charge. |
| 46 | Supplying all materials, labour , T and P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc, and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge. |
| 47 | Supplying all materials, labour , T and P and cutting grooves in pucca floors and walls for taking G.I./ P.V.C . Pipes and making good the damages including watering, curing, cost and conveyance of all materials to worksite, payment of rayolity, taxes etc all complete as per direction of the Engineer- in-charge. |
| 48 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori plast/Finolex/Supreme make Type -B ) |
| 49 | 110mm U-PVC P Trap(Ori Plast/Finolex/Supreme Make) |
| 50 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 51 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 52 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 53 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 54 | 110mm U-PVC HR Bend(Ori Plast/Finolex/Supreme Make) |
| 55 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 56 | 110mm U-PVC Socket (Ori Plast/Finolex/Supreme Make) |
| 57 | Supplying all materials, labour T and P and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast ironor MS brackets complete with fittings such as siphonic arrangements 15mm nominal size brass /pvc ball valve with polythene float CP brass handle, unions and couplings for connections with inlet, outlet and overflow pipes ., 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making god the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main, cost and conveyance of all materials to worksite , payment of taxes etc. all complete a sper P.H specification and direction of the Engineer-in-charge. (i) 10 ltr. capacity pvc L.L cistern with 32mm . Dia CP long flush bend ( Slimline -White-Parryware make) |
| 58 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.(i) European water closet with 'p' trap palin ( Hindware/Parryware/Neycer make) |
| 59 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge. (i) 550mmx400mm W.H. basin ( Hindware/ Parryware/Neycer make ) with 15mm dia C.P. pillar cock ( Plaza make) with |
| 60 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.(i) 25mmx600mm long CP towel rail |
| 61 | (ii) Towel ring |
| 62 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. (i)600mmx125mm plate glass shelf with CP/NP guard rails. |
| 63 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.(i) 600mmx450mm size B.E mirror (swivelled type) |
| 64 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge (i) CP Soap holder |
| 65 | Providing fitting, fixing of Aluminium door with anodized AL. door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10 |
| 66 | Ext. S/D Portion Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. Please Enable Macros to View BoQ information |
