|
| 1 | CIVIL WORKS:Dismantling G.C.I. or A.C sheet roofing after carefully removing the bolts and nuts including stacking of he materials for reuse and removing the debris with in 50m lead. Old building , Goat farm |
| 2 | Dismantling brick or stone masonry in lime or cement mortar under 3m. Height including stacking the useful materials for reuse and removing the debris within 50m lead. Old building, Parapet |
| 3 | Removing old lime or cement plaster from walls including ranking out joints 12mm deep (1/2 Inch) and removing the debris with in 50m lead including all labour T and P etc complete. Office room, Goat farm, C. wall |
| 4 | Earth work in excavation in foundation in hard or gravelly soil including hard moorum, with all leads and lifts including dressing and leveling the bed and depositing the excavated earth at place away from work site with all leads and lifts including cost of all labour and T&P and dewatering if required for the work etc. complete and as directed by the Engineer-in-charge. Gate Pillar, Drain,, Boundary wall, Plinth Protection key wall |
| 5 | Filling in foundatin and plinth with sand watered and rammed (Labour only) for 100 cum. Gate Pillar, Drain,, Boundary wall, Plinth Protection key wall |
| 6 | C.C. (1:3:6) with 4cm size crusher broken hard granite metal in F&P etc. Gate Pillar, Drain, Boundary wall, Plinth Protection key wall, Bed, Gate front |
| 7 | Cement concrete of proportion (1:2:4) using 12mm size clean hard black crusher broken granite stone chips of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm (6 inch) thick to the required level ramming, watering and curing etc. complete including cost and conveyance of all materials with and royalties and all labour with T&P required for the work etc. complete including dewatering if required. |
| 8 | Fly ash brick 25x12x8 masonary in cement mortar 1:6 after immersing bricks for six hours in water before use in Foundation and Plinth with all necessary projections using kiln burnt bricks of 10 Inch size having a crushing strength of not less than 75 kg per Sq.cm including splays cutting circular moulding, chamfering, corbelling, watering and curing etc. complete including cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete in all respect. Boundary Wall |
| 9 | R.C.C.(M20) Using 20mm and down grade H.G. chips , Column Footing: Gate Pillar, Drain wall |
| 10 | Column: Gate Pillar |
| 11 | Grade Beam : Gate Pillar |
| 12 | Straightening,bending,binding,and hooking M.S.door tor steel including cost, Column Footing , Grade Beam /Plinth Bend |
| 13 | Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in super structure per cum. Boundary Wall , Gate Pillar, Goat Farm Parapet. |
| 14 | 12mm thick c.p(1:6) for brick work in super structure etc,complete. Boundary Wall |
| 15 | 16 mm. C.P (1:6) Over brick stone masonary: Boundary Wall , Office room, Goat Farm, C Wall |
| 16 | Supplying, Fitting and Fixing Vitrified Tile Plain ivory Flooring ( 600 mm x 600 mm) with cost of all materials, tiles etc complete. Office room Ver. Step |
| 17 | Supplying, Fitting and Fixing Vitrified Tile in Dado Flooring with cost of all materials, tiles etc complete. Office room , Ver step. |
| 18 | Supplying, fitting and fixing M.S. window and door shutters etc. complete. Main Gate, Wicket Gate, 80x40 square pipe 4 Nos Truss, 50x50 square pipe 4 Nos Truss, Purlin for shed 2 , 30x30 MS Plate 8 Nos, 20mm Threat cut rod with bolt, 25x25 Wind Tie ,Grill Door |
| 19 | Hosting laying joint and Trusses and placeing in position including labour and T&P require for the work etc. complete as directed by E.I.C. |
| 20 | Supplying fitting and fixing in position well dressed and well seasoned Sal wood work framed and fixed (wrought and put up) in burgahs, rafters and posts including cost of coal tar, cutting grooves and mending sizes where necessary with cost and conveyance royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors. |
| 21 | Supplying, fitting and fixing of Tata make( Durashine) colour tin sheet or equivalent, heat resistant , specially colour coated Sheet for roofing including cost, conveyance of all materials, labour and T&P require for the work etc. complete as directed by E.I.C. Shed 1 and 2, Joint |
| 22 | Wall painting Two Coat with P.E Paint over a coat of primer including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. Office room, Ver, Ceiling, Toilet |
| 23 | Wall painting Two Coat with Weather coat over a coat of primer including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. Office room , Goat Farm, Boundary Wall cooping. |
| 24 | Painting Two Coat with Enamal paint over a coat of primer to Door & window including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. Door,Window ,Goat Farm Grill, Gate |
| 25 | Back Filling of surplus exacavated earth at work site by intial lead of 50.00 mtr including cost, conveyance of all materials, labour and T and P required for the work etc. complete as directed by the EIC.1/3 Qnty. Of item no.1 |
| 26 | Earth work in hard soil or gravelly soil within 50m . Initial lead and 1.5m. Initial lift including rough dressing as per specification approved by the department etc. |
| 27 | Coltaring two coat including cost of all materials, labour and T and P require for the work etc. complete as directed by the E.I.C. |
| 28 | Carraige charges of bullahs and bamboos including loding and unloading and stacking at site etc complete. |
| 29 | EI Works :Recessed wiring to light points/ fan points/ Exhaust fan / call bell point with 1.5 mm2 FRLS PVC insulated SC multistrand copper conductor of ISI marked ( Finolex/ Polcab/KEI/Anchor) with 20mm dia non-metalic PVC flexible conduit( Make-AKJ/ KINJAL/POLYCAB/ANCHOR) with 5/6 Amp., 250V modular switch ISI marked and ceeling rose of ISI marked ( Make Anchor-Roma Urban/Legrand myrius/ Schneider opale / Crabtree Athena/ L and T Engleze) Mounted an Modular G.I . box with Modular base and cover of suitable size ( Make Anchor -Roma Urban/Legrand myrius/ Schneider opale /Crabtree Athena/ L and T Engleze ), with 1.5 sq.mm FRLS PVC insulated single core multistrand Cu. conductor as earth wire including all accessories and connection . As per direction of Engineer- in-charge. ( Make of wire Finolex/ Land T / Anchor/KEI/Polycab/V-Guard) Group-A. |
| 30 | Group-B. |
| 31 | Group-C. |
| 32 | Supply and fixing of 6Amp 3 pin modular socket with 6Amp modular switch on existing board. (Make Anchor -Roma Urban/ Legrand myrius/Schneider opale /Crabtree Athena / L and T Engleze.) |
| 33 | Installation, Testing and Commissioning of Modular type ceiling fan regular, in existing switch box including connection with 1.5 sq . Mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required. ( Make Anchor-Roma Urban/ Legrand myrius/ Schneider opale/Crabtree Athena / L and T Engleze). |
| 34 | Recessed wiring to submain in the following sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/ 1990 in the following mm dia non-metalic heavy duty flexible conduit 1.6mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required. ( Make of wire Finolex/ KEI/Polycab/L and T/ Anchor) (a) 2x2.5 mm2 + 1x1.5mm2. in 20 mm dia |
| 35 | S/F of 1200mm High speed Ceiling fan, Heavy Duty, Durable, Copper winding, Aluminium blade ( ISI Mark) ( Usha Striker/ / Cromton AURA/ Havells SPARK Deco/ Bajaj Elegance Ivory make ) Orient Qusar ornamental. Rate Rs. 2637.00 Fixing with all materials 320.00 2957.00 |
| 36 | S/F of 1x18Wt. LED tube light fiting ( Philips / Panasonic / Havels ) make. |
| 37 | S/F of 45Wt. LED Street light fittings complete with G.I. Barcket ( Philips/ Panasonic/ Havels ) make. |
| 38 | S/F of Bakelite angle holder/ batten holder of ISI marked conforming to IS- 1258/ 1987 in place of ceiling rose ( make Anchor/ Cona). |
| 39 | S/F . of 9 Wt. LED bulb ( Philips /Panasonic / Havels ) make. |
| 40 | PH Works: Supplying all materials, labour,T and P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV ( 10 k.g. F/ cm ) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor , testing all complete as per specification and direction of the Engineer -in- charge. Ground Floor: 25mm dia PVC |
| 41 | 32mm dia PVC Pipe |
| 42 | Supplying all materials, labour T and P and fitting and fixing brass/ CP fittings of the following nominal bore with supply of all joiniting materials including cost and conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 15mm dia CP angle stop cock ( FLR-ACR-5053N) |
| 43 | 15 mm size CP flange |
| 44 | 15 mm dia CP two way bib cock (FLR-CHR-5041N) |
| 45 | 15 mm dia CP bib cock (Con-CHR-047KN Jaquar make) |
| 46 | 15 mm dia CP long body bib cock (Con-CHR-107KN Jaquar make) |
| 47 | 25 mm dia brass full way valve (Shakti make) |
| 48 | 32 mm dia brass full way valve (Shakti make) |
| 49 | 15 mm dia CP health faucet (Con-ALD-MCH-573 Jaquar make) |
| 50 | 15 mm CP extension piece |
| 51 | 125 mm CP grating |
| 52 | 20 mm dia CP concealed stop cock (Con-CHR-083KN Jaquar make) |
| 53 | Supplying all materials, labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 m length × 0.25 m width KB brickwork in cement mortar (1:6) of 0.46 m height in staging and 0.13 m thick circular protection wall of 0.46 m height to support the tank, 12 mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60 m × 1.60 m and 0.10 m thick RCC beam of 0.25 m × 0.30 m and 3.40 m average length in cement concrete (1:2:4) using 12 mm size crushed broken hard black granite chips and required steel reinforcement including centering, shuttering, watering, curing, cost of all materials, conveyance of all materials to worksite, payment of royalty, all taxes etc. all complete as per approved drawing, P.H specification and direction of Engineer-in-charge.1000 litres capacity PVC water storage tank at roof first floor |
| 54 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I pipes and fittings/P.V.C pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per direction of Engineer-in-charge. |
| 55 | Supplying all materials, labour, T&P and cutting holes in RCC floors and roofs upto 19 cm thick for passing P.V.C pipes and G.I fittings etc. and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H specification and direction of Engineer-in-charge. |
| 56 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I/P.V.C pipes and making good the damages including watering, curing, cost & conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per direction of Engineer-in-charge. |
| 57 | Supplying all materials, labour, T and P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conformi ng to ISI No 13592/1992 to walls with nails,bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non- heat apllication method/as per manufacture's specification , testing , earthwork in excavation in all kinds of soil and refilling of trenches, cost and conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe ( Ori Plast/Finolex/Supreme make Type -B) |
| 58 | 110mm U-PVC D/Jn door (Ori Plast/ Finolex/Supreme make ) |
| 59 | 110mm U-PVC 'P' Trap (Ori Plast/ Finolex/Supreme make ) |
| 60 | 110mm U-PVC Door bend (Ori Plast/ Finolex/Supreme make ) |
| 61 | 110mm U-PVC Plain bend (Ori Plast/ Finolex/Supreme make ) |
| 62 | 110mm U-PVC offset without ear (Ori Plast/ Finolex/Supreme make ) |
| 63 | 110mm U-PVC Cowl (Ori Plast/ Finolex/Supreme make ) |
| 64 | 110mm U-PVC HR Bend(Ori Plast/ Finolex/Supreme make ) |
| 65 | 110mm U-PVC S/Jn door (Ori Plast/ Finolex/Supreme make ) |
| 66 | 110mm U-PVC Plain tee (Ori Plast/ Finolex/Supreme make ) |
| 67 | 110mm U-PVC Door tee (Ori plast/Finolex/Supreme make ) |
| 68 | 110mm U-PVC Plain shoe bend ( Ori plast/Finolex/Supreme make ) |
| 69 | 110mm U-PVC Socket (Ori plast /Finolex/Supreme make) |
| 70 | Supplying all materials, labour , T and P and fixing the following vitreous china Wash Down Water Close ( European type W.C . Pan ) with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing,cost and conveyance of all materials to worksite , payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. European water closet with 'p' trap plain (Hindware/Parryware/Neycer make) |
| 71 | Supplying all materials, labour, T and P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/ Orissa pattern squatting pan ) duly embedded in cement concrete ( 1: 5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mmx 130mmx 30mm footrest, fixing 100mm dia HCI 'p' or 's' trap ( with /without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages, cost and conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer -in-charge. 580mm size Orissa pan ( Hindware / Parryware/ Neycer make ) |
| 72 | 550x400mm wH Basin with pedestall and pillar cock ( Jaquar/Hindware/ Parryware ) 22 inch x 16 inch pedestal. |
| 73 | Supplying all materials, labour, T and P and fixing standard sized glass -shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer-in-charge. 25mm x 600 mm long CP towel rail. |
| 74 | Supplying all materials, labour, T and P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer-in-charge. 600mmx 125mm plate glass shelf with CP/NP guard rails. |
| 75 | Supplying all materials, labour, T and P and fixing mirror of superior glass mounted on 6mm . Thick A.C sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer-in-charge. 600mm 450mm size B.E mirror ( swivelled type) |
| 76 | Supplying all materials, labour, T and P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer-in-charge. CP soap holder. |
| 77 | Supplying all materials labour T and P and fitting and fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer -in-charge. 1/2 inch x 5 inch CP Shower ( Plaza Deluxe Make) |
| 78 | Supplying all materials, labour, T and P and providing and fixing Vetrified tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement: 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering,curring,cost of all materials, conveyance of all complete as per P.W.D specification and direction of Engineer-in-charge ( Ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 60cm x60cm special printed series to be pre -approved by the Engineer-in-charge ( Somany/ Johnson/Kajaria) KajariaTile 60cmx 60cm Ground Floor |
| 79 | Supplying all materials, labour, T and P and providing and fixing Vetrified tiles in dado skirting on 12mm thick cement plaster ( 1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing, cost of all materials, convayance of all materials work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 60cm x30cm special palin / printed series to be pre-approved by the Engineer- in-charge) Somany/ Johnson/ Kajaria Kajaria Tiles 60cmx30cm Ground Floor. |
| 80 | Providing fitting,fixing of Aluminium door with anodized AL. Flush door section of 9202 as vertical member, 9201 as top and 9200 as middle bottom member with frame section No.9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour. T and P hire charges of drilling machine . labour chargees etc. complete . Ref: OBI10 |
| 81 | supplying all materials labour T and P and constructing 1.40m diax 2.00 m deep soak way pit with dry brick having crossing strength not less than 5kg/cm2 to 99 kg /cm2 in CM ( 1:6) for the remaining 0.4572 mm height of wall at top CC ( 1:3) inside and outside inside fill with dry brick khoa size 38mm, CM thick RCC perforted slab to aheight of 1.9012 m from bottom covered by means of 50mm thick RCC wall cover in pieces filled with iron plugs including earth work inexcavation refilling of cavity around the pit and painting the iron works complete a sper PHD design and specification including carraiage of all materials to site Please Enable Macros to View BoQ information |
