|
| 1 | Dismantling wooden boardings/panels in lining of walls and floooring, including supporting members and including stacking within 50 meters lead : Thickness above 10mm upto 25mm |
| 2 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 3 | CEMENT PLASTER (IN FINE SAND) 15mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) |
| 4 | Providing and Fixing Prelaminated HD, AC IV of approved brand, of planks 8mm thick on walls & floors including cost of supporting memberas of 5mm, foam layer for floor and supporting members and framework to support plank like runners 2\\"x1.5\\" @600 mm centrer to centre hortizontally and vertically whereever required as directed by EIC fixing with rawal plugs and screws , jams , studs ,ply boards 12mm@ 600mm etc in level and plum to be measured in fitted and finished form colour and pattern as approved by competent authority & ENGINEER IN CHARGE .excluding angle and cornice ( OF APPROVED BRAND AND MAKE AS DIRECTED EIC) |
| 5 | Providing and fixing MDFC beadings, cornices, profiles of desired matching colour with the planks where ever required as directed by EIC, complete job |
| 6 | Providing and fixing 2nd class teak wood lipping/moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/nails as per directions of the engineer-in-charge |
| 7 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm |
| 8 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 9 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 10 | Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should z rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in charge.With 16 mm thick bevelled tegular mineral fibre Antimicrobial false ceiling tile confirming to ISO 5 (class100 ) specifications |
| 11 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 12 | 2 mm thick |
| 13 | 1 mm thick |
| 14 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 15 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 16 | Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm) |
| 17 | Removing old paint work/putty from walls by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 18 | Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) including sand papering and preparing the surface smooth and making necessary repairs to scratches etc |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, two or more coats on old work.i/c applying wood fillers in cracks or damaged areas wherever required |
| 20 | Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture |
| 21 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge.Pre-laminated particle board with decorative lamination on both sides. |
| 22 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 23 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length Kiln seasoned and chemically treated hollock wood |
| 24 | Providing and fixing 10 mm thick ply wood for ceiling including cost of wooden supports for proper levelling (wherever required) with necessary nails etc. complete |
| 25 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Kiln seasoned & chemically treated hollock wood |
| 26 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Second Class kail wood |
| 27 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty : Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm) |
| 28 | Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S Flat 15x3 mm and nuts and bolts complete. Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides |
| 29 | Providing and fixing bright finished brass handles with screws etc. complete 75 mm |
| 30 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. 100x10 mm |
| 31 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 32 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 33 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. |
| 34 | Providing and fixing Health Faucet of approved quality |
| 35 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 36 | Providing and fixing 45 to 60 cm long PVC connections of superior quality |
| 37 | Providing and fixing C.P. Brass non telephonic type Wall mixer of approved make |
| 38 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 470x420mm bowl depth 178mm |
| 39 | Providing and fixing Sink mixer of approved make |
| 40 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 41 | Providing and placing water storage tank ISI : 12701 marked, with cover and suitable locking arrangement including making necessary holes for inlet, outlet and overflow connections complete |
| 42 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in chare.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 20mm OD(SDR-7.4) |
| 43 | Providing and fixing PVC pipes including PVC fittings laid in required gradient, inclding cost of all fixing accessories complete job as directed by EIC |
| 44 | 75mm dia |
| 45 | 100 mm dia |
| 46 | Providing and fixing of a Multipurpose locks for drawer/cupboard/wardrobe with necessary screws, complete as per direction of Engineer-in-charge |
| 47 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm |
| 48 | Engagement of Labourers for cleaning of store rooms, dismantling where ever required and removal of the rubbish/debris from the site. complete |
| 49 | Taking out existing wooden door/window shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 50 | Supplying of Invertor type Split Air conditioners (Blue Star, Voltas, O General, LG) suitable for operation On A/C supply single phase 50 HZ 230 V With hemeticaIly sealed Inverter compressor with air cooled condenser, latest R410A / R-32 refrigerant fan motor. start & run capacitors. relay & over load protector internal unit, with one indoor & one outdoor unit The condenser unit will be placed outside the room avoid noise including standard length of suitable size copper tubing covered with nitrile rubber insulation tube. Suitable capacité 3 core sheathed/ PVC copper cable and a battery operated wireless remote unit. 1.5 Ton Capacity (Hot & Cold) |
| 51 | Supplying. erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load. with over load protection. spike suppression, operating at 00 C to 400 C. Range etc capacity (5KVA Capacity) |
| 52 | Supplying & Fixing of PVC drain pipe 25mm including all accessories as required (ISI) |
| 53 | Extra for Fabrication Supply and fixing of Stand fabricated using slotted angle /L angle of slze 6mm x 5Omm for mounling out door/indoor A.C. unit/Batteries. |
| 54 | Installation, Testing, Commissining charges for splït type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 ton A/C. |
| 55 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling and making the wall good as required. Havells/Polycab/RR Kabel/Finolex(SAMPLE TO BE APPROVED BEFORE INITIATED) Group C |
| 56 | Wiring for Light /Power Plug with 2 x 4 sq,mm FRLS PVC Insulated Copper ûonductor single core cable in surface/Recessed medium class PVG Conduit along with 1 No, 4 sq.mm FRLS PVC Insulated copper conductor single core cable for loop earthing as required. Havells/Polycab/RR Kabel/Finolex(SAMPLE TO BE APPROVED BEFORE INITIATED) |
| 57 | Wiring for circuit/Submain Wiring along with earth Wire with the following Sizes of RLSPVC insulated copper conductor,single core Cable in surfaœ/Recessed nedium class PVC conduit as required. Havells/Polycab/RR Kabel/Finolex(SAMPLE TO BE APPROVED BEFORE INITIATED) |
| 58 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 59 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 60 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface Or in recess. including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch connnections etc. as required. |
| 61 | Supplying and Fixing suitable size G.I box with modular ptate and cover in front on surface or in recess,incIuding providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch,connecIion,painting etc. as required. |
| 62 | Supplying and fixing suitable size G.I box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. |
| 63 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and Axing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required. |
| 64 | Supply & Fixing of 28W, 2x2 LED Surface/Reccesse type Luminaite suitable foroperating Voltage range of 150V-270V. |
| 65 | Supply & Fixing of 20 W LED , Aluminum Extruded batten suitable for operating Voltage Range 140V-270V with inbuilt surge protection of 2 KV and Colour temprature of 6500K ANSI BIN . Minimum system lumens 2450 and system efficacy >125 Lm/watt ( Supported by in house NABL approved report of LM79 provided by OEM and duly signed by company manager not below rank of RM) . Luminaire should be suitable for wall/ceiling mounting with help of 2 Nos, sliding clips. Body made up of white powder coated Aluminium extruction with high translucent serrated milky white diffuser. Luminaire size should not be less than 1170 X 22 X 37 mm and power factor >=0.95, CRI>=80, THD <10% , Max system wattage should be 20 Watt,IP-20 ingress protection. |
| 66 | Providing and fixing on wall hot water 35 LTRS Electric Geyser with ABS Body of approved make (Hindware/crompton/Bajaj/Havells) including fixing with necessary bolts as directed by the EIC, Complete job |
| 67 | Supply,Installation,Testing and Commissioning 320 Cu.m/Hr. AC 220-240 Volts, 50 Hz exhaust fan made out of ABS Plastic Material with inbuilt thermo cutoff Protection and Noise Level not exceeding 37 dB of Following Sizes including connection etc. complete as required .300mm. Please Enable Macros to View BoQ information |
