|
| 1 | Earth work in bulk excavation in all kinds of soil by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. |
| 2 | Supply and filling of dry stone soling in foundation trenches tightly handpacked with hand ramming, watering and compacting to required density including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 3 | Providing and laying in position cement concrete 1:4:8 grade (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) including curing but excluding the cost of centring and shuttering all work upto plinth level including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 4 | Providing and laying in position cement concrete of specified grade including curing excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) including all leads, lifts, costs and carriages upto site of work complete job including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto all levels incl all costs and carriages Complete Job Thermo-Mechanically Treated bars of grade Fe-500D or more including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platforms beams stairs etc |
| 8 | Brick work with common burnt clay (non modular) bricks class designation 75 in superstructure above plinth level upto floor five level including curing in 1:6 cement mortar including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 9 | Providing and fixing Imported KD wood work in frames of doors, window, clerestory windows and other frames, wrought framed and fixed in position with holdfast lugs or dash fasteners of required dia and length incl cost of hold fast/dash fastener including cost and carriage of all materials to site of work, with all leads, lifts, loading, unloading, stacking, haulage, and octori taxes. |
| 10 | Proving and fixing Imported KD wood glazed shutters for windows and clerestory windows using 10kg/sqm (3.5 mm thick) glass panes including ISI mark bright finished butt hinges with necessary screws (30 mm thick) including all leads, lifts, costs and carriages upto site of work complete job |
| 11 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, including panelling of Imported KD Wood, all complete as per direction of Engineer-in-charge. of Imported KD Wood 30 mm thick incl all leads, lifts, loading unloading, cost and carriages with head load of materials involved upto site of work complete job |
| 12 | Providing and fixing 3.5 mm thick float Glass panes as per specifications with beading up to size 40x20mm in wooden frames incl all leads, lifts, loading unloading, cost and carriages with head load of materials involved upto site of work complete job |
| 13 | Structural steel work welded in built up section for trusses and framed work including cutting hoisting, and applying a primer coat of approved steel primer including all leads, lifts, costs and carriages upto site of work complete job . |
| 14 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.50 mm thick with zinc coating not less than 275 gram/m2 incl all leads, lifts, loading unloading, cost and carriages with head load of materials involved upto site of work complete job |
| 15 | Providing ridges or hips of width 60cm overall width plain GS sheets 0.50 mm thick fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. including all leads, lifts, costs and carriages upto site of work complete job |
| 16 | P/F Aliminium anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. of reputed make and model as directed and approved by Engineer in charge incl cost of necessary screws nails etc complete in all respects |
| 17 | Tower Bolts 100 mm |
| 18 | Tower Bolts 150mm |
| 19 | Handles 100 mm |
| 20 | Handle 125 mm |
| 21 | Ornamental Al Drop with inbuilt Lock |
| 22 | Hooks/Stays |
| 23 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. Prince, Supreme, Vectus or equivalent ( heavy duty) make. PN -16 pipes, 25 mm OD |
| 24 | PN -16 pipes, 32 mm OD |
| 25 | PN -16 pipes, 40 mm OD |
| 26 | PN -16 pipes, 50 mm OD |
| 27 | Providing and Fixing PPR Unions of required size and specification as approved PPR 25mm |
| 28 | PPR 32mm |
| 29 | PPR 40mm |
| 30 | PPR 50mm |
| 31 | PPR 32/25mm |
| 32 | PPR 32/25mm Tanky nipple |
| 33 | PPR 32/25mm reducer |
| 34 | 25^1/2\\" Female elbow |
| 35 | 25^1/2\\" Tee |
| 36 | Providing and fixing 15 mm nominal bore C.P. brass bib cock ofapproved quality conforming to IS : 8931 like Jaquar, cerra, Jhonson or equivalent incl all costs and carriages |
| 37 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality like Jaquar, cerra, Jhonson or equivalent make, weighing not less than 1.970 kg. |
| 38 | Providing and fixing CP Brass Single lever telephonic wall mixer ofquality & make as approved by Engineer in charg like Jaquar, cerra, Jhonson or equivalent make e 15 mm nominal dia |
| 39 | Providing and fixing 15 mm nominal bore C.P. angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 incl all costs and carriages complete |
| 40 | Providing and fixing C.P. Brass extension nipple (size 15mmx 50 mm) of approved make and quality as per direction of Engineer-incharge. |
| 41 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 42 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 225mm |
| 43 | P/F of CP Health faucet with shower and flexible tube upto 1.2 metre long with SS triangular plate to European type W.C. of quality and approved make like like Hindware, Cera, or equavalent as approved by Engineer - in - charge. |
| 44 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 45 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked black solid plastic seat and lid of approved brand like Hindware, Cera, or equavalent including all leads, lifts, costs and carriages upto site of work complete job |
| 46 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm P.V.C or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests of approved brand like Hindware, Cera, or equavalent including all leads, lifts, costs and carriages upto site of work complete job |
| 47 | Providing , installation, commissioming and testing Hot water Geyzer of approved make including fixing with bolts/ fastners like Venus, jupiton, Racold or equivalent make including all necessary fittings including all leads, lifts, costs and carriages upto site of work complete job 50 litre capacity |
| 48 | Providing and fixing rectangular high density polyethylene water storage tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. per liter capacity |
| 49 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25mm nominal bore |
| 50 | 32mm nominal bore |
| 51 | 40mm nominal bore |
| 52 | 50mm nominal bore |
| 53 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 54 | Providing and fixing CP/stainless steel anti cockroach 100mm dia floor trap with Grating on floor with cement mortar complete |
| 55 | Construction of brick masonary manhole of size 450x450 mm including PVC cover at top with frame, plastering and concrete base including all leads, lifts, costs and carriages upto site of work complete job |
| 56 | Providing and fixing Flexible pipe P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete 40mm dia |
| 57 | P/F unplasticised 45cm long PVC Connection Pipe with brass unions 15/20 mm nb |
| 58 | Providing and fixing toilet paper holder CP brass of approved specifications and brand |
| 59 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. |
| 60 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 61 | Providing and fixing centrifugal monoset 1HP water pump of approved make like Havells, crompton or equivalent make complete job with all necessery fittings |
| 62 | Providing and fixing P.V.C Soil, waste, Rain water Pipes,vent pipes ISI mark like Prince B-type, Phenolex or equivalent including all fittings with or without access of any degree i.e bends, junctions, cowls, offsets, access pieces, holder bats and structure steel fabricated supports, clamps for suspended pipes in ceiling, stays, through ducts, etc and jointing with solvent/seal joints including cutting holes in walls and floors 100 mm dia |
| 63 | 75 mm dia |
| 64 | P-Trap 100m mm |
| 65 | Plain bend 100 mm |
| 66 | plain bend 75 mm |
| 67 | Door Junction 100x100x100mm |
| 68 | Door Junction 75x75x75mm |
| 69 | Floor Trap with grating CP |
| 70 | Cowel 75mm |
| 71 | Collar 100mm |
| 72 | Collar 75mm |
| 73 | Reducer 100/75 mm |
| 74 | Bend 100/45 mm |
| 75 | 40 mm thick with 20mm nominal size stone aggregate Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete including all leads, lifts, costs and carriages upto site of work complete job |
| 76 | Dry random rubble masonry with hard stone from Quarry in foundation and plinth with Bond stone including all leads, lifts, costs and carriages upto site of work complete job |
| 77 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 20mm |
| 78 | P/F of MS fan box of standard quality and make of specified size as per the elctrical plan approved in ceiling |
| 79 | P/F of MS round Junction boxes with plate for lighting point complete |
| 80 | 15 mm thick cement plaster on rough side of brick wall of mix: 1 :6 ( 1 cement : 6 fine sand ) including all leads, lifts, costs and carriages upto site of work complete job |
| 81 | 12 mm thick cement plaster of mix: 1 :6 ( 1 cement : 6 fine sand ) including all leads, lifts, costs and carriages upto site of work complete job Exterioir walls |
| 82 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) incl all costs and carriages complete |
| 83 | Providing and applying 2mm thick white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 84 | Providing and laying vitrified floor tiles (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (600x600mm) including all leads, lifts, costs and carriages upto site of work complete job |
| 85 | Providing and fixing ply board 12mm thick of approved quality and brand incl cost of frame work wooden joists of required section fixed with nails screws, complete with wooden cornice of approved size and one or more coats of primer on exposed siurface incl all costs and carriages complete job |
| 86 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work incl all costs and carriages |
| 87 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade including all leads, lifts, costs and carriages upto site of work complete job : |
| 88 | Providing and laying flamed/shot blasted Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including curing and mirror polishing etc. all complete as specified and as directed by the Engineer-in-Charge : |
| 89 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer,. including all leads, lifts, costs and carriages upto site of work complete job Please Enable Macros to View BoQ information |
