|
| 1 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. All kinds of soil |
| 2 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 3 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:All works upto plinth level |
| 4 | Demolishing R.C.C. work including stacking of steel bars & disposal of unserviceable within 50 mts. lead. |
| 5 | Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead. |
| 6 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement. |
| 7 | Exposed decorative laterite masonry using Patradevi stone of size as specified and laid as directed by architect in cement mortar 1:4 (1 cement : 4 coarse sand) |
| 8 | Providing & fixing G.I. pipes complete with G.I. fittings including trenching & re-filling etc. (external work).50 mm nominal bore |
| 9 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe) 50 mm nominal outer dia pipes. |
| 10 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. |
| 11 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete. |
| 12 | Applying breathable, non-reactive, antifungal, and water repellant Silane/ Siloxane chemical as approved by Archaeological Survey of India/ Engineer, of approved brand and manufacture, diluted with solvent mineral Turpentine oil in the ratio of 1:12 (One part of approved chemical :12 Part of Turpentine oil), on the exposed laterite masonry surface with two or more coats to give uniform application of chemical on the surface, all complete as per direction of Engineer. (The rate is inclusive of all materials & labours). |
| 13 | Supply of Architectural designed pole of 3mts height post top pole made of galvanised iron section of 114mm & 60mm dia. This architecturally designed pole is structuraly sound Windspeed considered in design 50m/s IS875:PART 3:1987, Material for tubes steel of grade YST210, Material for base plate steel of garde E250 to IS2062; 2011. The pole will be provided with an inbuilt junction box to fix 32Amp connectors & 6Amp MCB inside the cut window of the bottom pipe the inbuilt box should have a flush door of suitable size with Allenkey locking on both side. The decorative pole will be mount. The base palte shall have 4 hole suitable for M16/450 foundation bolts ensuring firm grouting in the specialy designed RCC foundation. The Galvanised pole should be pointed in 3 layer coating(coating thickness should not be tha |
| 14 | Supply of 40W decovative luminaire made of spun aluminium body with pressure die-cast heat management(PDCHM) and the IP65 optical compartment with high power Ld/s is comprised of a deep drawn chemically polished and comounting type fixture. System Wattage: 40W LED Protection class: IP65, 50-60Hz, Operating Voltage: 1200-277Vac, LED Colour temperature: 4000K, Life span:>59,000 hours, Physical Body: die cast Aluminium Base, body spun Aluminium, diffuser: convex type Transucent/V Transucent Polycarbonate glass, Mounting: suitable for 48mm O pipe, Finish: Power coated Black, driver Power Factor>87% Surge Protection device of 10KVA nake philips. Ld:s of Osram & driver to be make Philips: LM 78-2019 report to be provided Mke: Suncity or equivalent as directed by engineer in charge. |
| 15 | Supply of street light panel or equivalent as directed by engineer in charge. |
| 16 | Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm. 60 mm thick in all colours except grey (M35 grade) Please Enable Macros to View BoQ information |
