|
| 1 | ADDITION ALTERATION P1 BUILDING B/R WORK |
| 2 | Demolition of concrete in ground floors and pavings not exceeding 15 Cm thickness ( Below or above ground level) etc complete all as specified and as directed. |
| 3 | Materials and labour for 75mm thick Plain Cement Concrete 1:3:6, type C-2 using 40mm graded stone aggregate as in plinth protection complete all as specified and as directed. |
| 4 | Demolition of cement concrete (Reinforced) of any description and any position not other wise specifically provided reinforcement cut as required to facilitate demoltion complete all as specified and as directed. |
| 5 | Material and labour for Mild steel TMT bars in reinforcement, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D all as specified and as directed. |
| 6 | Material and labour for Reinforced Cement Concrete, RCC 1:1.5:3, Type A1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed.Note: Reinforcement shall be measured & paid seperately. |
| 7 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping) rough finished surfaces of concrete all as specified. |
| 8 | Demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified and as directed by the Engineer-in-Charge. |
| 9 | Materials and labour for fly ash Brick work old size with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 10 | Materials and labour for fly ash brick work old size with sub class ‘B’ brick straight or curved on plan to any radius in half brick wall in cement mortar 1:4 complete all as specified and as directed. |
| 11 | Materials and labour for taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 12 | Materials and labour for Rendering 15mm thick in cement plaster 1:6 on any fair faces of brick work or concrete surfaces finshed even and smooth with out using extra cement etc., complete all as specified and as directed. |
| 13 | Material and labour for rendering in Cement Mortar 15mm thick in two coats, i.e, in Cement Mortar 1:4, 5mm thick mixed with water proofing compound as per manufacturers' instructions over in Cement Mortar 1:6, 10mm thick on fair faces of brick/concrete surfaces, finished even and fair externally all as specified and as directed. Note: WPC will be measured and paid separately. |
| 14 | Supply only Integral water proofing compound cnforming to relevant IS. |
| 15 | Materials and labour for 5mm thick rendering in cement and sand mortar 1:3 on ceiling, chajja surfaces (concrete surfaces) finished even and smooth wihtout using extra cement, complete all as specified and directed. |
| 16 | Demolition of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises to out side MD land etc., complete all as specified and as directed |
| 17 | Materials and labour for Demolition of stone slabs (Kota/Granite/Marble stone) of any description laid bedded and pointed in any mortar complete all as specified and as directed. |
| 18 | Materials and labour for Double charged vitrified ceramic tiles 10 mm thick (square/Rectagular) polished area exceedig 0.36 sqm and n exc 0.42 sqm in each tiles as in floors etc set and jointed in neat cement slurry and pointed in white coloured cement to match the shade of tile over and including 15mm thick screed bed in cement and sand mortar (1:6) complete all as specified and as directed. |
| 19 | Supply and fix for Double charged vitrified ceramic tiles 10 mm thick (square/Rectagular) polished area exceedign 0.36 sqm and n exc 0.42 sqm in each tiles as in skirting, wall etc set jointed in neat cement slurry and pointed in coloured cement to match the tiles over and including 10 mm thick rendering in CM 1 : 3 for laying tiles in walls etc. complete all as specified and as directed. |
| 20 | Materials and labour for Non-Skid coloured printed ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm and not exceeding 0.18 sqm of each tiles as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 21 | Materials and labour for Non-Skid coloured printed ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18sqm and not exceeding 0.38 sqm of each tiles as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 22 | Materials and labour for Glazed ceremic coloured printed tiles of size 350 mm x 250 mm x 7 thk or 450x 300mm x7mm thick as in dados, skirting, wall etc set jointed in neat cement slurry and pointed in coloured cement to match the tiles over and including 10 mm thick rendering in CM 1:3 for laying glazed tiles in floors etc. complete all as specified and as directed. |
| 23 | Supply and fix for Glazed ceremic premium tiles of size 1200 mm x 600 mm x 10 thk as in dados, skirting, wall etc., set jointed in neat cement slurry and pointed in coloured cement to match the tiles over and including 10 mm thick rendering in CM 1 : 3 for laying glazed tiles in floors etc., complete all as specified and as directed. |
| 24 | Materials and labour for 10mm thick Parking tiles of any size /shape set jointed and pointed in neat cement slurry in floors, with grey cement and pigment to match the tiles over and including 15mm thick Screed bed or bedding layer in CM 1:4 for laying floor finishes, complete all as specified and as directed. |
| 25 | Materials and labour for 20 mm thick machine cut, Granite stone slab (of any type)(table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the shade of granite stone including cutting and polishing types and making mould on edges & including cutting of three numbers of grooves etc., including 20mm thick screed bed in CM 1:6. complete all as specified and directed. |
| 26 | Materials and labour for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 10mm thick Rendering in CM 1:3 complete all as specified and as directed. |
| 27 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and as directed. |
| 28 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed. |
| 29 | Taking down shutters of any description exc 1 sq. m and not exc 2 sq. m each complete all as specified and as directed. |
| 30 | Resecuring or easing & adjusting shutters of any description exc 1 sq. m and not exc 2 sq. m each, without taking down shutters complete all as specified and as directed. |
| 31 | Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life. |
| 32 | Supply and fix 30mm thick single piece, coloured ABC (ACRYLONITRILE BRUTADINE STYRENE) coated, PUF filled door shutters with PUF (Poly Urethane Foam) insulation of minimum density 40 Kg/CUM filled in between two ABS sheets of thickness 1.2mm (min), border covered with insitu pasted ABS strips of width equal to thickness of door shutters, 1.2mm thickness, reinforced with two number 10mm CTD bars, pre-embedded with wooden blocks of suitable sizes for receiving hinges, tower / sliding bolts, towel rails, handles etc, with/without embossed pattern complete all as specified and as directed. |
| 33 | Supply and fix 2nd class hard wood, plain, solid, straight framed, in parts rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 34 | Supply and fix 1st class hard wood, plain, solid, straight framed, in parts rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. |
| 35 | Materials and labour for PCC 1:2:4, type B-0, using 12.5mm graded stone aggregate as in bed block for fixing hold fast etc., complete all as specified and as directed. |
| 36 | Supply and fix 1st Class hardwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers,polished supplied and fitted to chowkats etc.,complete allas specified and as directed. |
| 37 | Supply and fix 30mm thick Flush shutters,solid core construction,with partical board core and plywood face panels,commercial type on both sides complete all as specified and as directed. |
| 38 | Supply and fix second class hardwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats etc., complete all as specified and as directed. |
| 39 | Supply and fix 35mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass ,gauge etc ( without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8 clause 8.20(a), supplied and fitted to chowkats complete all as specified and as directed. |
| 40 | Supply and fix for Powder coated aluminium sliding windows for three track with 4mm thick coloured glass with wire mesh shutter fixed with powder coated aluminium standard beads/glazing clips having weight not less than 300gm per RM, locking arrangement etc and aluminium frame of size 50mmX40mmX1.55mm and shutter of section 20mm X40mm X1.55mm with necessary all fittings complete all as per manufacturer's instructions and complete all as specified and as directed. |
| 41 | Supply and fix aluminium grill powder coated DG 916 of 10mm dia rod square/ rectangular/ circular or similar type of shape, aperture not exc 7 cm in length or width fixed with 'H' or 'F' channel of size 38mm x 12 mm x 1.30mm (Sec No 8778) complete all as specified and as directed.Make : Grill No 20 of DECOREL , Jindal/Hindalco |
| 42 | Supply and fix Fully glazed double leaf shutter with 12mm frosted toughned glass fixed with CP ware patch fittings with Hydraulic floor spring & pivot,handle, locking arrangement fixed and with necessary all fittings complete all as per manufacture instructions and all as specified and as directed. |
| 43 | Supply and fix Fully glazed Partition with single leaf sliding shutter with 12mm frosted toughned glass fixed with CP ware patch fittings with pivot,handle, locking arrangement fixed and with necessary all fittingscomplete all as per manufacture instructions and all as specified and as directed. |
| 44 | Supply and fix 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete allas specified and as directed. |
| 45 | Supply and fix 4mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and as directed. |
| 46 | Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 47 | Materials and labour for 18/19mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination with lipping fixed with screws to timber frame work in repairs complete all as specified and as directed.Make: Century/Kitlam/greenply |
| 48 | Supply and fix of framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed. |
| 49 | Supply and fix butt hinges alluminium alloy with galvanised mild steel hinge pin 125mm size, type C-22, complete all as specified and as directed. |
| 50 | Supply and fix butt hinges alluminium alloy with galvanised mild steel hinge pin 100mm size, type C-22, complete all as specified and as directed. |
| 51 | Supply and fix 200mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 52 | Supply and fix 300mm long of alluminium sliding door bolt with hasp, staple (bolt type) with sand or die cast and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or brass door shutter complete all as specified and as directed. |
| 53 | Supply and fix in 100mm length extruded alluminium alloy handles fabicated type, anodised complete all as specified and as directed. |
| 54 | Supply and fix in 150mm length extruded alluminium alloy handles cast type , bright polished complete all as specified and as directed. |
| 55 | Supply and fix continous (Piano) hinges of mild steel bright finish or elctrogalvanised 30mm flap width complete all as specified and as directed. |
| 56 | Supply and fix in Mortice lock 4 lever with handle all as per Godrej cart part No 172 or equivalent of other specified makes complete all as specified and as directed.Make |
| 57 | Supply and fix brass cupboard locks grade I, 4 lever of size 65mm complete all as specifed and directed. |
| 58 | Supply and fix floor door stopper of brass body and 140mm with hard drawn steel spring complete all as specified and as directed. |
| 59 | Supply and fix wardrobe hooks (single) 50mm to 60mm, aluminium, complete all as specified and as directed. |
| 60 | Supply and fix 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished complete all as specified and as directed. |
| 61 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stones, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. |
| 62 | Materials and labour for in sheet glass 4.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and as directed. |
| 63 | Supply and fix in repairs stainless steel drapery rods of 25mm external dia having wall thickness not less than 1.5mm with incuding designer lattos and brackets all as specified and approved by Engr In charge including taking out old pelmet with curtain rods complete all as specified and as directed. |
| 64 | Supply and fix in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 65 | Materials and labour for preparing of New or previously painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 66 | Materials and labour for, Preparing of new untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chorme primer complete all as specified and directed. |
| 67 | Taking down steel tubing and connections including removing from site of 15mm bore pipe complete all as specified and directed by Engineer-in-charge. |
| 68 | Taking down steel tubing and connections including removing from site of 20mm bore pipe complete all as specified and directed by Engineer-in-charge. |
| 69 | Supply and fix of 20mm CPVC pipes SDR11 & Plain CPVC SDR11 fittings in walls/ceilings or laying in floors complete all as specified and as directed. |
| 70 | Supply and fix of 25mm CPVC pipes SDR11 & Plain CPVC SDR11 fittings in walls/ceilings or laying in floors complete all as specified and as directed. |
| 71 | Cuttings chases for concealed water tubing of concealed conduit (cutting n.exc 10 cms girth) and making good in CM ( 1:3) in brick walls complete all as specified and as directed. |
| 72 | Supply and Fix Gun metal globe or gate valve of size 25mm bore confirming to IS 778-1984 with brass spindle and iron wheel head at the top screwed both ends for GI pipe including all fittings / fixtures like nipple, union etc. fixed in repairs complete all as specified and as directed |
| 73 | Supply and fix in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated all as per Cat No.ARI-39001B of Jaquar or technocommercially equivalent of other specified makes screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified |
| 74 | Supply and fix in repairs CP brass shower rose with swival joint 125 mm size suitable for 15 mm bore pipe all as per Cat No.OHS - 1667 of Jaquar or technocommercially equivalent of other specified makes complete all as specified and as directed. |
| 75 | Supply and fix in repairs 15mm Angle cock fancy type ISI marked cost copper alloy all as per Cat No.OPP-15053PM of Jaquar or technocommercially equivalent of other specified makes screw down high preasure with crutch or butterfly handle screwed both ends suitable for iron pipes of 15 mm bore complete all as specified and as directed. |
| 76 | Supply and fix in repairs 15 mm bore TWO WAY bib taps chromium plated and fancy type with crutch or butter fly handle all as per Cat No.OPP-15041PM of Jaquar or technocommercially equivalent of other specified makes high pressure screwed down for iron pipes complete all as specified and as directed. |
| 77 | Supply and fix in repairs 15mm dia PVC Connection 600 mm long with 2 nos brass check nuts suitable for 15 mm bore of pipe with washers complete all as specified and as directed. |
| 78 | Supply and fix in repairs Helath faucet Chromium Plated for with 1.00 mtr long pvc pipe all as per Cat No.ALD-573 of Jaquar or technocommercially equivalent of other specified makes including necessary GI fittings as required like tee, nipple etc.,complete all as specified and directed. |
| 79 | Supply and fix in repairs looking mirror, fancy type of size 630mm x 445 mm or of next nearer higher size designed as required at site all as per Cat No.AKP-35795 of Jaquar or technocommercially equivalent of other specified makes complete all as specified and as directed. |
| 80 | Supply and fix in repairs of glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide and 60cm long with chromium plated bracket guard and railing etc.,complete all as specified and as directed. |
| 81 | Supply and fix in repairs Soap dish, chromium plated brass all as per Cat No.AKP-35731P of Jaquar or technocommercially equivalent of other specified makes fixed with brass nuts complete all as specified and as directed. |
| 82 | Supply and fix in repairs CP Towel Stand 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats all as per Cat No.AKP-35781PFS of Jaquar or technocommercially equivalent of other specified makes fixed with brass nuts complete all as specified and as directed. |
| 83 | Supply and fix in repairs CP Towel Rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats all as per Cat No.AQN-7711 of Jaquar or technocommercially equivalent of other specified makes fixed with brass nuts complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 84 | Supply and fix in repairs CP Towel Rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats all as per Cat No.AQN-7711 of Jaquar or technocommercially equivalent of other specified makes fixed with brass nuts complete all as specified and as directed. Please Enable Macros to View BoQ information |
