Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and directed by Engineer-in-Charge complete all as specified and as directed. |
| 2 | Taking down and refixing in same opening chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame)complete all as specified and directed by Engineer-in-Charge complete all as specified and as directed. |
| 3 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and directed by Engineer-in-Charge complete all as specified and as directed. |
| 4 | Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer - in - Charge complete all as specified and as directed. |
| 5 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge complete all as specified and as directed. |
| 6 | Roughening surfaces of old concrete floor or old plastered skirting by picking, sweeping clean and washing down with water to remove dust etc and brushing surface with neat cement slurry with 3.0 kg of cement per sq. metre,complete all as specified and as directed. |
| 7 | Demolition of Concrete in any description n exc 15 cm thickness (below or above ground level)complete all as specified and directed by Engineer-in-Charge complete all as specified and as directed. |
| 8 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge complete all as specified and as directed. |
| 9 | Demolition of reinfocement cement concrete of any description and in any position complete all as specified and directed by Engineer-in-Charge complete all as specified and as directed. |
| 10 | M & L 25 mm thick PCC 1:2:4 type B0, using 12.5mm graded aggregate as in floors to receive surface of tile complete all as specified and directed. |
| 11 | M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge complete all as specified and as directed. |
| 12 | M&L Vitrified Ceramic double charged edge cut joint free coloured or printed dark shade tiles 08 to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 sqm, in floors etc. including set and jointed in neat cement slurry over 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 13 | M&L Vitrified Ceramic double charged edge cut joint free coloured or printed dark shade tiles 08 to 10 mm thick (square/ rectangular)polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 sqm,as in vertical surfaces such as skirting or dad set and jointed in neat cement slurry incl 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 14 | M&L for placing the spacer on vitrified tiles flooring/vertical surfaces and the gap to be filled with silicon sealant (Epoxy) complete all as specified and as directed.Note : Area will be measured flat. |
| 15 | M & L Glazed ceramic coloured tiles (square/ rectangular) in vertical surface 300x600 x 7mm thick set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the surface incl 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.Note : Engr-in-Charge will select sample from latest catalouge. |
| 16 | M&L 18-20 mm thick Granite of any colour (tablee rubbed and polished) as in windows cill & cooking platforms and Incl cement mortar (1:4) and form work , pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing at edge complete all as specified and as directed. |
| 17 | M & L post treating the top surface with ATT of filled earth at the rate of 5 liters of emulsion per square metre of surface areacomplete all as specified and as directed. |
| 18 | M & L post treating the top surface with ATT of plinth protection at the rate of 5 liters of emulsion per square metre of surface area complete all as specified and as directed. |
| 19 | M & L post treating along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear metre incl drilling and plugging holes etc complete all as specified and as directed. |
| 20 | M&L Machine cut kota stone slab flooring 18-20 mm thick and size exc 0.16 sqm jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and treating the surface including 20 mm thick cement screed bed in CM 1:6 complete all as specified and as directed. |
| 21 | M&L for 18-20 mm thick Machine cut kota stone slab as in riser and steps, skirting in full length in single piece without joint, with groove cutting in double line of stair width laid over cement screed and jointed with rubbing and treating the surface incl bull nosing at edges of tread and riser incl 10 mm thick rendering in cement mortar 1:4complete all as specified and as directed. |
| 22 | M&L for PCC Type B1 (1:2:4) for copings on brick wall surfaces including weathering, slightly rounded or chamferred angles and throating ,complete all as specified and as directed. |
| 23 | M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and as directed. |
| 24 | M&L for RCC 1:2:4 type B-1(Nominal Mix)(using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs,shelves etc complete all as specified and directed. |
| 25 | M&L for RCC 1:2:4 type B-1(using 20mm graded stone aggregate) (nominal mix) as lintel / roof beam Incl Chajjas,door pillars etc complete all as specified and directed, (reinforcement to be measured & paid under respective items). complete all as specified and as directed. |
| 26 | S&F Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)complete all as specified and as directed. |
| 27 | S&F Form work to sides and soffits of floor or roof beam, beam hings, girders bressume, lintles, contilevers, shelves including support over lungs etc also splays between floor and beams etc complete all as specified and as directed. |
| 28 | M&L form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete, complete all as specified and as directed. |
| 29 | Supply and fix TMT bars, 6 mm to 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,roof beam,lintel beam,stair case, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0complete all as specified and as directed. |
| 30 | Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified and as directed. |
| 31 | M&L for brick work with fly ash bricks in cement mortar, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and as directed. |
| 32 | M&L for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed. |
| 33 | M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and as directed. |
| 34 | M&L 15mm thick rendering in cement mortar 1:4 to on brick masonary wall surfaces or on other than fair faces of brick masonary fair finished without using extra cement complete all as specified and as directed. |
| 35 | M&L rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge complete all as specified and as directed. |
| 36 | Capillary rise treatment of walls, Consumption base coat: 0.3 Kg/Sqm, Second and Third coat : Latex sheild 2K (or equivalent), Consumption top coat: 3 Kg/Sqm, System requirements : density : 2.00 Kg/Ltr, Compressive strength: 0.5 N/Sqmm. complete all as specified and as directed. |
| 37 | Complete removal of existing water proofing roof treatment of any description incl under layer, taking down of cement plaster,concrete and mud pushka of any thickness and removal of debris from site to a place outside defence land as specified by civil authorities and clean the surface of roof with water and remove dust complete all as specified and as directed. |
| 38 | Cleaning of the exposed concrete slab and repairing the surface irregularities like cracks, potholes, as per manufacturers method statement by HS Rapair(or equivalent)along with HS Latex Plus(or equivalent)& cement in mixing ratio of 1:4 where ever required complete all as specified and as directed. |
| 39 | Providing cement concrete type B-0, 1:2:4 (using 12.5 mm graded crushed stone aggregate ) in roof padding, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed. |
| 40 | One component liquid ,solvent free ,cold applied , water-proofing membrane that is highly elastic and UV resistant with 10 years Warranty. ASTM D 6083-97a Waterproofing and heat reflecting system having following key performance properties. (i) UV resistant, prevent yellowing and weathering. (ii) Highly elastic upto 350% and crack bridging. (iii) Excellent adhesion on porous and non-porous substrates. (iv) Tensile Strength >10 N/Sqmm with GeoTextile fleece. (v) Solar Reflective Index (SRI) more then 109-111 ASTM E1980-11. System : First coat : Providing and applying primer over the prepared surface with HS PU roofkoat Primer(or equivalent), Coverage : 0.2Kg/Sqm (with 50% dilution of water), Reinforcement: Geotextile 40 gsm, Second coat:Home sheild roofkoat (or equivalent), Consumption: 0.5 Kg/Sqm, Third coat: HS PU roofkoat (or equivalent), Consumption : 0.8 Kg/Sqm. System buildup -1.5Kg/Sqm with geotextile of 40gsmFor accessible roof, tiles with screed/adhesive may be fixed thereafter complete all as specified and as directed. |
| 41 | Material and labour for water proofing treatment to RCC sunken slab and adjoining vertical surfaces(not exceeding 45cm depth of sunken) complete specified as under and as directed by the Engineer-in-charge :- (a) Cleaning the surfaces with wire brush/coir brush, removing loose material like dust particles,dirt etc and incl after that laying 75mm thick PCC 1:2:4 (using 20mm graded crushed stone aggregate) for maintain the outward slope. (b) Rendering 15mm thick in cement mortar(1:3) using coarse sand including mixing of liquid WPC in mortar @200ml per bag of cement of 50kg, trowel even and smooth with steel trowel on sunken surfaces. (c) Creating fillet covering of 50x50mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on horizontal and vertical surfaces. (e) Provision of glass fiber mesh of 2x2mm immediately on above coating (f) Apply second coat of two component modified polymer coating after 72hrs of above coating (g) Joining the sanitary pipes with the waterproofing tape having bridging ability of more then 1.5mm (h) Filling the gap between the wall opening and sanitary pipe with non shrink cementeous grout. Note: (i) The complete waterproofing treatment shall be carried out by the manufacturer or their authorized applicators as approved by the GE.(ii) The plan area of floor shall be considered for measurments & payment. complete all as specified and as directed. |
| 42 | Supply only Integral water proofing compound liquid complete all as specified and as directed. |
| 43 | S&F 32 mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in as spout pipes to pour out residual water out from the treated area complete all as specified and as directed. |
| 44 | M&L for hard core, of broken bricks broken to gauge n exc 63mm for laying sub base of thickness 150mm complete all as specified and as directed. |
| 45 | S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing or composite panel LDPE core PET coating ( both side decorative type ) fixed with and including 5.50mm thick black film glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug(b) Middle and lock rail : 150x44x1.48mm thick(c) Bottom rail : 150x44x1.48mm thick(d) Top rail/style : 85x44x1.48mm thick(e) Aluminium beading : 0.7mm thick(g) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper 100 mm long, Incl Heavy duty hydraulic door stopper.(h) 04X S/S Hinges 100mm long (02x top,01x centre and 01x bottom) on each shutter (j) Making good of wall surface to match with existing surface complete complete all as specified and as directed. |
| 46 | S&F aluminium alloy powder coated aluminium door frame fixed with inside glazing and outside s/s wire mesh side hung shutters fixed with rubber gasket and aluminium beading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug(b) Middle and lock rail : 150x44x1.48mm thick(c) Bottom rail : 150x44x1.48mm thick(d) Top rail/style : 85x44x1.48mm thick(e) Aluminium beading : 0.7mm thick(f) Plain glass 5.5mm thick with black film(g) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.40 mm and fixed with stainless steel wire staples(h) 04X S/S Hinges 100mm long (02x top,01x centre and 01x bottom) on each shutter (j) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver ,aluminium stopper 100mm long, Incl Heavy duty Hydroulic door stopper.(k) Making good of wall surface to match with existing surface complete complete all as specified and as directed. |
| 47 | S & F of factory made single extruded WPC (wood polymer Composite) solid door frame/chowkhat of size 75x50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade) calcium carbonate and natural fibers and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with fullbody threaded star headed SS Screw having minimum frame density of 750 kg/cum screw withdrawal strength of 2200 N (Face) &1100 N (Edge) minimum compressive strength of 58 N/Sqmm modules of elasticity 900N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant Note: For WPC solid door frame,minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable variation on profile dimension plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. |
| 48 | S & F of factory made single extruded WPC (wood polymer Composite) solid plain flush door shutter of 30 mm size. comprising of virgin PVC polymer of K value 58-60 (Suspension Grade) calcium carbonate and natural fibers and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum screw withdrawal strength of 1800 N (Face) &900 N (Edge) minimum compressive strength of 50 N/Sqmm modules of elasticity 850N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant Note: For WPC solid doorshutter,minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable variation on profile dimension plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. |
| 49 | S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with 01x stainless steel mosquito proofing shutter and 02x glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :95x35mm X 1.48 mm thick for three tracks.(ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlocking closing(vi) Making good of wall surfaces to match with existing surfaces complete all as specified and directed. |
| 50 | Material & labour aluminium ventilator section size (65x38mm) fixed type, incl figured glass at bottom and s/s wire mesh cloth at top complete all as specified and directed. |
| 51 | S&F partition wall and fixed ventilator of powder coated aluminium hollow sections members of size 63.50 mm x38mmx 1.48 mm thick with distance of vertical hollow section, 1.2mtr to 1.8 mtr height of wall having top rails, bottom rails and middle rail of size 63.50 mm x 38mm x 1.48 mm and upto middle rail wall panels shall be covered by 5 mm thick aluminium composite panel LDPE core PET coating (both side decorative type) with aluminium clip height of middle rail shall be 1 meter from floor and remaining portion above middle rail shall be provided with 5 mm thick glass incl eaching approved designed with aluminium stiprs/beadings with rubber gasket as per existing or as provided complete all as specified and as directed. |
| 52 | M&L powder coated aluminum window/ doors grills fixing along with frame of following specification, grills with opening 69.4mm X 78.2mm grills thickness shall be of 6.4mm X 5.8mm having weight not less than 2.306 Kg/per sqm shape as ordered with frame channel of 34 X 11mm X 1.7mm thick fixed with screw inside of the window complete all as specified and directed. |
| 53 | S&F 100 mm size butt hinges medium weight stailess steel colled rolled complete all as specified and directed. |
| 54 | S & F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 55 | S&F 125 mm size aluminium handles, cast type anodised complete all as specified and directed. |
| 56 | S&F rotational moulded polethylene water tank of 1000 ltrs capacity, ISI Marked (cylindrical vertical with closed top with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacity n exc 1000 ltr complete all as specified and directed. |
| 57 | S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 58 | S&F GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including cutting chasing and taking down existing GI tubing 15 mm dia & connections complete all as specified and directed. |
| 59 | S&F GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed. |
| 60 | S&F Vitreous China counter top oval type white colour wash basin of size 560x400x250mm including bottle trap ,waste pipe fixing on counter complete all as specified and directed. |
| 61 | S&F 15mm dia CP brass wall mixer with 03 in 1 wall mixture with hand shower and head shower with 1.5 Mtrs flexible tube and crutch (quarter turn) for mixing hot & cold water screwed down for iron pipe Including necessary fitting complete all as specified and directed. |
| 62 | S&F 15mm dia CP brass Wash basin mixer long body swan neck type for mixing hot & cold water screwed down for iron pipe including necessary fitting complete all as specified and directed. |
| 63 | S & F in repair fancy type 150mm size square brass CP shower rose with 450mm long shower arms complete complete all as specified and directed. |
| 64 | S&F in repairs 15 mm dia bib tap long Body fancy type chromium plated with flange quarter turn complete all as specified and directed. |
| 65 | S&F fancy type chromium plated brass two way bib cock suitable for 15mm bore pipe complete all as specified and directed. 2 Way Bib Cock with Wall Flange complete all as specified and directed. |
| 66 | S&F in repair stainless steel tubular towel ring rectangalur type (8x5 Inch) including apair of CP brass bracket complete all as specified and directed. |
| 67 | S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed. |
| 68 | S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm , complete all as specified and directed. |
| 69 | S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed. |
| 70 | S & F fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed. |
| 71 | S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 72 | S & F in repairs Rimless Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings,Size: 360x675x750 mm, S Trap-300 mm including making good to floor complete all as specified and directed. |
| 73 | S&F vitreous china squatting pan of orrissa pattern size 580 x 440 mm white with \\"P\\"or \\"S\\" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding c complete all as specified and directed. |
| 74 | S&F vitreous china wash down water closet pan (Pedestal pattern) white,(excluding flushing cistern and pipe) including PVC Seat cover for EWC pan (White ) of standard quality including hinges bolt, complete all as specified and directed. |
| 75 | S&F in repairs vitreous chinaware white wash hand basin with pedestal of flat back of size 55X45x20cm with full pedstal of height 82 cm complete including fancy CP pillar tap swan nack, CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specified and directed. |
| 76 | S&F PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed. |
| 77 | S&F fancy type brass chromium plated toilet paper holder, complete all as specified.Make hindware or equivalent complete all as specified and directed. |
| 78 | S&F Viterous China urinals incl fish eye , bowl type (back to corner wall type) incl spreader, complete including providing and fixing plus, beding urinal agianst wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; large size 590X390X 375 mm including Waste pipe complete all as specified and as directed. |
| 79 | S & F CP health faucet with 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body complete all as specified and as directed. |
| 80 | S&F in repair PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and as directed. |
| 81 | S&F in repair PVC (SWR) floor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and as directed. |
| 82 | Supply and fixing UPVC(SWR) type B pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls and laying to floor including stack clamp of GI flat 30 mm wide 2 mm thick (having 100 mm clear space from wall) fixed to wall with nails at the spacing of 1.5 mtr centre to centre, complete all as specified and as directed. |
| 83 | Supply and fixing UPVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30 mm wide 2 mm thick (having 100 mm clear space from wall) fixed to wall with nails at the spacing of 1.5 mtr centre to centre complete all as specified and as directed. |
| 84 | S&F PVC (SWR) 110mm bore bends with eccess door any radius complete all as specified and as directed. |
| 85 | S&F PVC (SWR) 75mm bore bends with access door any radius complete all as specified and as directed. |
| 86 | S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and as directed. |
| 87 | S&F PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and as directed. |
| 88 | S&F UPVC(SWR), junction single, (single reducer 'T') equal or unequal for 110mm x75 mm bore , complete all as specified and as directed. |
| 89 | S&F PVC (SWR) 110mm branch piece, single (single Y) equal or unequal complete all as specified and as directed. |
| 90 | S&F PVC (SWR) 110mm bore bends any radius complete all as specified and as directed. |
| 91 | S&F UPVC (SWR) vent cowl 110 mm complete all as specified and as directed. |
| 92 | S&F designed looking mirror size exc 0.54 sqm to 0.75 sqm of selected quality 6mm thick glass, mounted on fixed to wall with CP plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 93 | S & F PTMT alloy toilet cabinet with mirror of overall size 350 x 450mm and fixed to wall complete all as specified and as directed.. |
| 94 | S & F S/S towel hanger with minimum 06 Hooks and fixed to wall/door complete all as specified and as directed. |
| 95 | S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings) complete all as specified and as directed. |
| 96 | M&L for Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including one shop coat of zinc chromate primer before fabrication distance pieces, cleats etc GDE Fe 410-W quality B. complete all as specified and directed. |
| 97 | Supply and fixing, Fiber glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with L type or J type or cranked hook bolts or coach screw and washer in roof,wall or truss etc complete all as specified and as directed. |
| 98 | S&F Pre-coated galvalume aluminium zinc (AZ-150) coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 99 | S&F Pre-painted galvalume aluminium zinc (AZ-150) coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 100 | S&F Framed work as in doors, gates,collapsible gate and cattle fencing of angle or other section with gusset plates, rails, braces,tubular sec of angular,square or rectangular etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing complete FE 290 Gde E-165 complete all as specified and as directed. |
| 101 | M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas in brick walls complete all as specified and as directed. |
| 102 | S&F in repair PVC solid interlocking wall paneling of 5.5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified and as directed. |
| 103 | Material & Labour providing and fixing stainless steel 304 grade railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or stair case the side of waist slab with suitable arrangement complete all as specified and as directed. |
| 104 | M&L preparation new untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete complete all as specified and as directed. |
| 105 | M&L for complete removal of existing treatment on wall/Ceilling,roof projectios,Including facia,cornices etc by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc. by skilled labour (up to 4th storey with necessary scaffolding) complete all as specified and as directed.Note : Work will be carried out through authrosied applicator only. |
| 106 | M&L for waterproof cement based putty @ 1 Kg(undiluted) per sqm. of average thickness 1 mm in each coat over the plastered/old painted surface of wall/ceilling (up to 4th storey with necessary scaffolding) after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Applying putty manually in double layer on new/old sufaces of wall/ceilling and finishing the surface even and smooth in level without any undulations. 3) Allow 6-8 hrs time to dry the putty surface.Note : Work will be carried out through authrosied applicator only. complete all as specified and as directed. |
| 107 | M&L for one coat of acrylic waterbased interior (wall/ceilling up to 4th storey with necessary scaffolding) grade primer @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and as directed.Note : Work will be carried out through authrosied applicator only. |
| 108 | M&L for one coat of acrylic waterbased exterior (wall/ceilling up to 4th storey with necessary scaffolding) grade primer @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and as directed.Note : Work will be carried out through authrosied applicator only. |
| 109 | M&L for Preparing the primer surface and applying two coats of oil bound distemper on wall/ceilling (up to 4th storey with necessary scaffolding) using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and as directed.Note : Work will be carried out through authrosied applicator only. |
| 110 | M&L for water based premium acrylic smooth exterior emulsion for approved colour (up to 4th storey with necessary scaffolding) with silicon additive excellent dirt pickup resistance with low VOC less than 50 AntifugalAnti Algai properties in two coat @1.79 litre (unndiluted) /10 sq mtrs diluted with water as per manufacturer instructions applied over priming surface with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and as directed.Note : Work will be carried out through authrosied applicator only. |
| 111 | Taking down carefully aluminium conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed. |
| 112 | M&L for complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS insulated and sheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm multistranded copper conductor FRLS insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked terminated into GI/pressed steel modular terminal boxes including modular switch cover IS marked for mounting modular switches, sockets, fan regulators etc complete all as specified and as directed for the following : |
| 113 | One light/fan point controlled by one, one way switch 6 Amp complete all as specified and as directed |
| 114 | do but one 3 pin modular socket outlet 6 amp independent board complete all as specified and as directed |
| 115 | do but one 3 pin modular socket outlet 6 amp on same board complete all as specified and as directed |
| 116 | All as per srl item No 2 above but for one 3 pin modular socket outlet 15/16 Amps independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire complete all as specified and as directed |
| 117 | S&F switch modular one way 06 Amp,1 module complete all as specified and as directed |
| 118 | S&F switch modular one way 16 Amp,1 module complete all as specified and as directed |
| 119 | S&F Modular socket 6A-2/3 Pin 2 module 230V AC complete all as specified and as directed |
| 120 | S&F Modular socket 6A/16A-3 Pin 2 module 230V AC complete all as specified and as directed |
| 121 | S&F modular type fan regulator, 2 module ,compatible with any fan complete all as specified and as directed |
| 122 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed |
| 123 | Taking down existing ceiling fan of any size/sweep including oiling, greasing, cleaning and applying two coats of synthetic enamel paint after preparation of surface and refixing the same complete all as specified and as directed |
| 124 | Supply and fixing ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and as directed |
| 125 | Supply and fixing lamp holder, Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed |
| 126 | S&F LED lamp of capacity 9 / 10 Watt suitable for B22 holder complete all as specified and as directed |
| 127 | Supply and fixing LED light fitting 1 x 20 Watt, 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed |
| 128 | S&F MCB SPN complete 40-63Amp with rupturing capacity 10 KA 'C' series, complete all as specified and as directed |
| 129 | Supply and fixing MCB single pole 40-63 Amp with rupturing capacity 10 KA 'C' series complete all as specified and as directed |
| 130 | Supply and fixing MCB single pole 6 to 32 Amp with rupturing capacity 10 KA 'C' series complete all as specified and as directed. |
| 131 | S&F Vertical Distribution Board (TP&N) 4 way double door suitable for MCB 3/4 pole of cap upto 125 Amp as incomer and out going MCBs SPN and should be IP 54 protected with Copper Bus Bars, Neutral Links, Earthing bar complete all as specified and as directed |
| 132 | S&F MCCB four pole 125 Amp, 16 KA, 415 volts with adjustable thermal settings complete all as specified and as directed Note: TPN DB and MCCB should be of same make. |
| 133 | S&F Distribution Board (SPN) double door 12 Way and should be IP 54 protected with Copper Bus bar, Earth Bar, neutral Bar complete all as specified and as directed |
| 134 | S&F Distribution Board (SPN) double door 08 Way and should be IP 54 protected with Bus bar, Earth Bar, neutral Bar complete all as specified and as directed |
| 135 | S&F Distribution Board (SPN) double door 04 Way and should be IP 54 protected with Bus bar, Earth Bar, neutral Bar complete all as specified and as directed |
| 136 | S&F sub main wiring with single core cable 2 x 6 sq mm FRLS insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x4 Sq mm FRLS insulated unheathed copper conductor cable as earth wire connected with main earth dolly including chiseling, cutting & making good to match with the existing surface complete all as specified and as directed. |
| 137 | S&F sub main wiring with single core cable 4 x 10 sq mm FRLS insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 2x4 Sq mm FRLS insulated unheathed copper conductor cable as earth wire connected with main earth dolly including chiseling, cutting & making good to match with the existing surface complete all as specified and as directed |
| 138 | Material & labour for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross-sectional area 35 sqmm 3.5 core complete all as specified and as directed |
| 139 | Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cables & foundation of poles ,stay assembly and getting out in any type of soil complete all as specified and as directed |
| 140 | Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and as directed |
| 141 | Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed |
| 142 | M&L Clear dry and sharp sand as in cushioning layer over and under cable laid in trenches complete all as specified and as directed |
| 143 | Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid complete all as specified and as directed |
| 144 | M & L for GI pipe of size 40 mm light grade for floor, road cutting and protection of cable complete all as specified and as directed |
| 145 | Material and labour for cutting of bituminous road / floor / culvert / PCC hard standing for laying of pipe / cables not exceeding 1.5 meter wide and not exceeding 1.5 meter deep including refilling / with material and , watering well ramming / compacting and making good with PCC 1;2;4,type B-1, 100 mm thick complete all as specified and as directed |
| 146 | M & L for galvanised steel earthing complete with 60 cm x 60 cm x 6 mm thick galvanised steel earth electrode and 04 mm dia galvanised earth lead wire burried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to earth lead 4.0 mm dia GI wire protected by 15 mm bore light grade galvanised iron pipe and other and connected to test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron wire mesh, charcoal and common salt in alternater of 15 cm complete thickness all around the GI plate electrode complete with earth pit PCC 1:3:6 type CI and RCC cover and necesary excavation and earth work in hard/dense soil and disposal of spoil to a distance not exc 50 mtr and necessary testing complete all as shown in electorical plate No 03 connected to earthing test point including following elements/works complete all as specified and as directed |
| 147 | Supply and fix Distribution Board (SPN) 2Way and should be IP 43 protected with Copper Bus bar 100 Amp rated ,Earth Bar ,neutral Bar Door Earthing complete all as specified and as directed |
| 148 | Supply and fix MCB SPN complete 32 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and as directed |
| 149 | Supply and laying of AC copper pipe with 4sqmm 3 core cu cable ,insulation tube complete all as specified and as directed |
| 150 | M & L for submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor single core cable , multistranded and including suitable size of PVC Concealed conduit and all accessories fixing on walls / roofs / ceiling etc. earth dolly, terminated in terminal box all as specified and directed by Engr-in-charge for 2x4 sq mm and 1x4 sq mm as earth wire complete all as specified and as directed Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
