|
| 1 | ITEM NO.: 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. Beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. Complete. (Lift upto 3.00m.) By Manual Means.... (INo21-01, PgNo 153) (STATE SSR) Item Spec: (Bd.A.1 Page No. 259) |
| 2 | ITEM NO.: 2 Providing and laying Cast in situ/ReadyMix cement concrete in M-10 of trap/ granite/ quartzite/gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed etc).... (INo24-01, PgNo 175) ( STATE SSR) Item Spec: (Bd. E. 1 Page No. 287)RA NO.: 1 |
| 3 | ITEM NO.: 3 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed etc)....(INo25-50, PgNo 181) (STATE SSR) Item Spec: (Bd.F.6 Page No. 300 and B.7, Page No.38) RA NO.: 2 |
| 4 | ITEM NO.: 4 Providing and applying two coats of flat oil paint of approved colour and shade to internal /external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface excluding primer coat) etc. complete..... (INo35-12, PgNo 224) (STATE SSR) Item Spec: (Bd.0.7 Page No. 406) |
| 5 | ITEM NO.: 5 Providing and fixing in position TMT - FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete..... (INo26-33, PgNo 188) (STATE SSR) Item Spec: (Bd. F. 17, Page No. 306) RA NO.: 3 |
| 6 | ITEM NO.: 6 Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.....(INo23-02, PgNo 173) (STATE SSR) Item Spec: (Bd.C.3 Page No. 275) RA NO.: 4 |
| 7 | ITEM NO.: 7 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.....(INo27-01, PgNo 197) (STATE SSR) Item Spec: (Bd. G. 1 Page No. 313) RA NO.: 5 |
| 8 | ITEM NO.: 8 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm. to 20cm. including watering and compaction etc. complete..... (INo21-37, PgNo 157) (STATE SSR) Item Spec: (Bd.A.11 Page No. 263) RA NO.: 6 |
| 9 | ITEM NO.: 9 Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq.mt. Total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min. 550 Mpa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. Fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. Complete. (weight of profile 4.52 kg/sqm)....(INo38-34, PgNo 236) (STATE SSR) Item Spec: (As directed by Engineer in charge.) |
| 10 | ITEM NO.: 10 Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry. curing, polishing and cleaning etc. complete.....(INo33-05, PgNo 213) (STATE SSR) Item Spec: (Bd.M.3 Page No. 380) RA NO.: 7 |
| 11 | ITEM NO.: 11 Providing internal cement plaster 20mm thick in single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete.... (INo32-06, PgNo 209) (STATE SSR) Item Spec: (Bd.L.4 Page No. 368) |
| 12 | ITEM NO.: 12 Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete..... (INo35-13, PgNo 224) (STATE SSR) Item Spec: (Bd.0.8 Page No. 406) |
| 13 | ITEM NO.: 13 Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete.... (INo33-51, PgNo 218) ( STATE SSR) Item Spec: (A directed by Engineer in charge) |
| 14 | ITEM NO.: 14 Royalty Charges for HARD MURUM. Rate = Royalty + surcharge (2%) (211.95 +4.23216.18 Per Cum)....(INo1-A, PgNo 1) (STATE SSR) Item Spec: (As Directed By Engineer Incharge) |
| 15 | ITEM NO.: 15 CONCRETE Compressive Strength OF C.C. Cube(Set of 3 cubes)..... (INo19-VQC, PgNo 584) (STATE SSR) Item Spec: (As per Standard Specification) |
| 16 | ITEM NO.: 16 BRICKS Water Absorption (Set of 5 Bricks), Compressive Strength(Set of 5 Bricks), Efflorescence (Set of 5 Bricks)..... (INo13-VQC, PgNo 584) (STATE SSR) Item Spec: (As per Standard Specification) Please Enable Macros to View BoQ information |
