|
| 1 | EARTH WORKS |
| 2 | Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller or wooden or steel rammer and rolling every third and topmost layer with power roller of minimum 8 tonne and dressing up in embankment for roads marginal banks flood banks and guide bank lead upto 50 metres and lift upto 1.5 metre |
| 3 | Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 4 | Hard/Dense Soil |
| 5 | Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 6 | All Kinds of Soil |
| 7 | Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 8 | Supplying and filling in plinth with sandy soil under floors including watering, ramming, consolidating & dressing complete. |
| 9 | CONCRETE WORKS: |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: |
| 11 | 1:4:8 (1 Cement:4 coarse sand:8 graded stone aggregate: 40 mm nominal size) |
| 12 | 1:5:10 (1 Cement: 5 coarse sand:10 graded stone aggregate: 40 mm nominal size) |
| 13 | Providing & laying damp-proof course 50 mm thick with cement concrete cement concrete 1 : 2 : 4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 14 | R.C.C. Work |
| 15 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level: |
| 16 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 17 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : |
| 18 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 19 | R.C.C. work in beams, suspended floors, roofs having slope uptp 15o landings, balconies, shelves, chajjas, lintels, band, plain window sills, staircases and spiral staircases above plinth level upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with 1 : 1 .5: 3 (1 cement :1.5 coarse sand :3 graded stone aggregate 20 mm nominal size) |
| 20 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 21 | Thermo-Mechanically Treated bars |
| 22 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 23 | Thermo-Mechanically Treated bars |
| 24 | FORM WORK |
| 25 | Centering and shuttering including strutting,propping etc.and removal of form for : |
| 26 | Foundations, footings, bases of columns, etc. for mass concrete |
| 27 | Columns, pillars, posts and struts |
| 28 | Lintels, beams, plinth beams, girders, bressumers and sqm cantilevers |
| 29 | Suspended floors. roofs, landings, balconies and access platform, with water proof ply 12mm thick. |
| 30 | BRICK WORKS: |
| 31 | Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: |
| 32 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 33 | Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in |
| 34 | Cement mortar 1 : 4 (1 cement : 4coarse sand) |
| 35 | WOOD WORKS |
| 36 | Providing wood work in frames of doors, windows, clerestory windows and other frames.wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately |
| 37 | Local best quality Uningthou wood |
| 38 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. |
| 39 | Local best quality Tolhao Wood |
| 40 | 35 mm thick Shutters |
| 41 | Providing and fixing bright finished brass door latch with necessary screws etc. complete |
| 42 | 250 x 16 x 5 mm |
| 43 | Providing & fixing bright finished brass Tower bolts (barrel type) with necessary screws etc. complete. |
| 44 | 250x10 mm |
| 45 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: |
| 46 | 125 mm |
| 47 | STEEL WORKS |
| 48 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffinge polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 49 | Providing and fixing ceiling at all hieghts including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm flanges od 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs 230 mm interval, including fixing of gypsum board to |
| 50 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095 - Part 1 |
| 51 | Trapzodial Profile Pre-painted profile sheet roofing of approved brand DYNA Roof or equivalent with selt drilling screws of 68mm long Xylon coated screws with PVC washer & cap complete, excluding the coat of purlinsr & trusses |
| 52 | Pre-painted Galvalume Sheet ( PPGL) |
| 53 | i) Profile sheet 0.50 mm /4.2 kgs/sqm |
| 54 | Trapzodial Pre-painted Profile Sheet for Ridges Gutter or Valley 610 mm wide of approved brand DYNA Roof or equivalent fixed with selt drilling screws of 68mm long Xylon coated screws with PVC washer & caps completed, excluding the coat of purlins rafters & trusses. |
| 55 | Pre-painted Galvalume Sheet (PPGL) |
| 56 | i) Profile sheet 0.40 mm /3.2 kgs/sqm |
| 57 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide zinc chrome primer conforming to IS:2074-1979) welded and bolted including special shape washer etc. complete. |
| 58 | Electric resistant welded welded tube (Conforming to IS : 1611- 1979 ) |
| 59 | FLOORING: |
| 60 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc, complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). |
| 61 | Light shade using white cement. |
| 62 | Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 63 | Marble tiles (polished) Raj Nagar |
| 64 | 18mm thick |
| 65 | Marble stone flooring with 18mm thick marble stone (sample Of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with |
| 66 | Raj Nagar Plain |
| 67 | Extra for prefinished nosing to treads of steps of marble stone. |
| 68 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in alt colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (I cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 69 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.080/0 and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. |
| 70 | Size of Tile 600 x 600 mm |
| 71 | Self Adhesive PU Tactile Tile. |
| 72 | FINISHING: |
| 73 | 12 mm cement plaster of mix 1:4 (1 cement:4 coarse sand). |
| 74 | (1 cement:4 coarse sand) |
| 75 | 15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement:4 coarse sand). |
| 76 | 1:4 (1 cement:4 coarse sand). |
| 77 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. |
| 78 | New work(two or more coats)over and including priming coat with cement primer |
| 79 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface |
| 80 | Water thinnable cement primer |
| 81 | Finishing walls with textured exterior paint of required shade: |
| 82 | New Work(two or more coats applied @3.28 ltr/10 Sqm)over and including base coat of water proofing cement paint [email protected]/10 sqm. |
| 83 | Applying priming coat:- |
| 84 | With ready mix pink or grey primer of approved brand and manufacture on wood work(hard and soft wood) |
| 85 | Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture to give an even shade. |
| 86 | Two or more coats on new work |
| 87 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaece to prepare the surface even and smooth |
| 88 | Installation of Lift Machine (6 passenger capacity) |
| 89 | Soil testing |
| 90 | Water Supply and sanitary Installation |
| 91 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be |
| 92 | All Kinds of soil |
| 93 | Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 94 | Concrete |
| 95 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: |
| 96 | ( 1 Cement.• 3 coarse sand 6 graded stone aggregate 40 mm nominal size) |
| 97 | 1:4:8 ( 1 Cement: 4 coarse sand 8 graded stone aggregate 40 mm nominal size) |
| 98 | FORM WORKS: |
| 99 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 100 | Foundations, footings, bases of columns, etc. for mass concrete |
| 101 | Suspended floors, roofs, landings, balconies and access |
| 102 | RCC WORKS: |
| 103 | Reinforced cement concrete work in beams, suspended floors, roofs having stope upto 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 104 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. |
| 105 | Thermo-Mechanically Treated bars |
| 106 | PRE-CAST: |
| 107 | Providing, hoisting and fixing upto floor five lovol procast reinforced comont concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the tike including tho cost 01 required contoring, shuttering but excluding cost of reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand: 3graded stone aggregate 20mm nominal size). |
| 108 | Brickworks: |
| 109 | Brick work with 1st class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in: cum |
| 110 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 111 | Half brick masonry with 1st class common burnt clay F.P.S. (non modular) bricks in superstructure above plinth level upto floor V level in |
| 112 | Cement mortar 1 : 3(1 cement : 3 coarse sand) |
| 113 | Honey-comb brick work 10/11.4 cm thick with 1st class common burnt clay FP.S. (non modular) bricks in superstructure above plinth level and upto floor V level in cement mortar 1 : 4 ( 1 cement : 4 coarse sand) |
| 114 | Flooring: |
| 115 | Cement concrete flooring 1:2:4 (I cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost Of nosing of steps etc. complete. |
| 116 | 40mm thick with 20mm nominal size stone aggregate. |
| 117 | Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (I cement : 3coarse sand) finished with a floating coat of neat cement |
| 118 | 18 mm thick |
| 119 | SANITARY INSTALLATION |
| 120 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with scat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever). conforming to IS : 7231. with all fittings and fixtures complete. including cutting and making good the walls and floors wherever required : |
| 121 | W.C. pan with ISI marked white solid plastic seat and lid |
| 122 | White Vitreous China Wash basin size 550x400 mm with single 15 mm C.P. brass pillar taps |
| 123 | Providing and fixing a mm dia C.P. / Ses Jct with flexible tube upto 1 metre tong with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 124 | Providing and fixing P.V.C. Waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 125 | Flexible pipe |
| 126 | 32 mm dia |
| 127 | Providing and fixing 600x450 mm bovolod cdgo mirror of superior 1,053.30 glass (Of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass scrows and washers complete. |
| 128 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 each 195.80 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms |
| 129 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 130 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 131 | Providing and fixing UPVC soil, waste, rain water and vent pipes including all requisite fittings, jointing of pipes & fitting with solvent cement, tenching, refilling & testing of joints complete as per direction of Engineer in charge |
| 132 | 75 mm dia |
| 133 | 110 mm dia |
| 134 | Water Supply |
| 135 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work. including cutting chases and making good the wall etc. |
| 136 | 20 mm diameter |
| 137 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing 01 pipes & fittings with one step CPVC solvent cement, trenching. refilling & testing of joints complete as per direction of Engineer in Charge. |
| 138 | 32 mm diameter |
| 139 | Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. External work |
| 140 | 32 mm diameter |
| 141 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 |
| 142 | 15 mm diameter |
| 143 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete |
| 144 | 25 mm diameter |
| 145 | Providing and placing on tcrrace (at all floor levels) polyethylene per litre 10.20 water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and tho baso support for tank. |
| 146 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points Of approved quality conforming to IS:8931 |
| 147 | 15 mm nominal bore |
| 148 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 149 | Group A |
| 150 | Group B |
| 151 | Group C |
| 152 | Wiring for light/ power plug with 4X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 153 | Wiring for light/ power plug with 4X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 2 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 154 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. |
| 155 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 156 | 2X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 157 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 158 | Supply and drawing following size of steel conduit along with accessories in surface/ recess i/c painting in case of surface conduit or cuutt the wall and making good the same in case of recessed conduit as reqd |
| 159 | 25 mm |
| 160 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 161 | 5/6 A switch |
| 162 | 15/16 A switch |
| 163 | 3 pin 5/6 A socket outlet |
| 164 | 6 pin 15/16 A socket outlet |
| 165 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 166 | Supply and fixing modular type blanking plate on existing modular plate and switch ox excluding modular plate as reqd. |
| 167 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.. |
| 168 | 1 or 2 Module (75 mmX75 mm) |
| 169 | 4 Module (125mm X 75mm) |
| 170 | 12 Module (200 mmX150 mm) |
| 171 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/wooden block includingonnectiontc as reqd. |
| 172 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders inexisting cubicle panel board including drilling holes in cubicle panel making connections etc as reqd. |
| 173 | 800 A , 35 KA, 4 Pole MCCB |
| 174 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 175 | 8 way, Double door |
| 176 | 12 way double door |
| 177 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 178 | Single pole |
| 179 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 180 | 43 amps |
| 181 | 63 amps |
| 182 | Supplying, installing, testing and commissioning of surfaceecess mounting vertical type 415V MB distribution board of sheet steel dust protected duly phosphatized and powder painted inclusive of 2 amps tinned copper busbar common neutral link earth bar din bar forunting MCB's detachable gland/knock out plate and with 100 amps 10A MCCB as incomer interconnection between incomer MCCB and bus of followingay (butthout MCB's) as reqd. |
| 183 | 12 Way (8+36) TPN MCB DB Duble door. |
| 184 | Earthing with copper plate 600mm x 600mm x 6mm thick i/c accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as reqd |
| 185 | Extra for using salt and charcoal for G.I or copper plate earth electrode as reqd |
| 186 | S/F 48'' sweep (1200mm) A.C.Ceiling fan complete with down rod canopy 3 (three) blades but without regulator etc as reqd.(Make Bajaj/Usha or similar) |
| 187 | Supplying, Erection, testing and commissioning of (pre-wired) wall bracket/ceiling fittings of all sizes and shapes containing CFL/LED/W GLS lamps per fitting, complete with all accessories including connection etc. as required (havell,s /Bajaja/Phillips/Cromton). |
| 188 | Ceiling fitting (Surface) with 15/18 watt LED Lamp. |
| 189 | S/F surface Pendent mounting 18 W led Downlight complete with driver i/c connections etc as reqd |
| 190 | Supplying, installtion of exhaust fan in the existing opening, including making good the damage, connection,testing,commissioning etc as reqd. |
| 191 | 225mm sweep |
| 192 | S/F surface Pendent mounting 9 W led bulb complete with driver i/c connections etc as reqd |
| 193 | Supplying V Cable at site as per specification of enineer in charge. |
| 194 | 16 mm (Two core) MV Cable |
| 195 | Lightning Conductor along with copper wire with all accessories |
| 196 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 197 | 100 A, 10 kA,TPMCCB |
| 198 | RISING MAINS & BUS TRUNKING |
| 199 | Providing anf Fixing ( Following rating and breaking capacity) MCCB in esisting cubicle panel board including drilling holes in cubicle panel & making connection as reqd. |
| 200 | 125 A, Isc = 25 kA for 1 second |
| 201 | Providing and fixing 125 amp TPN stand ground on load change over switch (Compact design)415/500 V including connectionetc as reqd |
| 202 | S/F Bus bar chamber with 4 strips copper bus bar of length 300mm suitable for 200 amp capacity complete with all accessories i/c connection earthing the body etc as reqd |
| 203 | EARTHING |
| 204 | Earthing with copper earth plate 600 mm X 600 mm X 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. without charcoal/ coke and salt) as required. |
| 205 | Extra for using salt and charcoal for GI or copper plate earth electrode as reqd |
| 206 | Providing and Fixing 4mm dia copper wire on surface or in recessed for loop earthing as reqd |
| 207 | CHAPTER 7-MV CABLE LAYING |
| 208 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of size not less than 25 Sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. |
| 209 | Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required. |
| 210 | Additional Items |
| 211 | Laying and fixing of 1 no.PVC onsulated PVC sheathed power cable of 1.1KV grade of size not less than 25 sqmm but not exceeding 120sqmm on surface as reqd. |
| 212 | Supplying installing testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses connections earthing etc as reqd. |
| 213 | 63 A TPN |
| 214 | Supply,installation, testing and commissioning of 450 Amp Control Panel Please Enable Macros to View BoQ information |
