|
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern as in roof coverings.Complete all as specified and directed. |
| 2 | Dismantling timber scantling 40 sqcm & over in section uframed in any position. Complete all as specified and directed. |
| 3 | Demolotion of cement concrete (un reinforced) in groundfloor and paving n.exc 15 cm thickness (below or above ground level) complete all as specifed and directed. |
| 4 | Demolition of brick work in cement mortar including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 5 | Taking down cement plaster of any description, thickness on brick, stone, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, removal of rubbish and cleaning, etc complete as directed and specified. |
| 6 | Supply and fixing of MS joist channel (Fe 410-W Gde E-250 Quality A), angle or Tee section, MS tubes, flats square bars etc fixed indepently or framed or without connecting plates ,trusses etc any type framing including purlins and rafters etc confirming to Grade Fe 410-0 or Fe-310-0 complete all as specified and directed. |
| 7 | Supply and fixing of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 8 | Supply and fixing of pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick for ridge cover of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 9 | Material and labour for 15mm thick rendering in cement mortar 1:6 to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and fair without using extra cement complete all as specified and directed. |
| 10 | Material and labour for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM 1:4 finished even and fair. Complete all as specified and directed. Note: Work shall be carried out upto 3 storey. Rates of necessary scaffolding deemed to be include in this item |
| 11 | Material and labour for 595 mm X 595mm false ceiling system , using hot dipped galvanised steel section exposed surface with precoated capping, GI powerd coated tee and cross tee of size 24x32mm & 24x27mm having 0.27mm gauge at every 600mm c/c interval and wall angle of size 19x19mm having 0.35mm gauge fixed to the wall. The above grid is tobe suspended at every 1200mm c/c in both direction using 2mm thick pre-straightened GI wire laying designer tile ivory painted (high pressure steam cured) of 4 mm thickness (as per IS 14862) of size 595x595 mm and ant ine of the design (cascadev or electra) , back of the tile duly sanded and finished with a coat of protective paint over the formed grid etc including dismantling existing false ceiling complete all as specified and directed. |
| 12 | Material and labour for complete removal of existing treatment from wall upto plaster surface by washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed. Note: Work shall be carried out upto 3 storey. Rates of necessary scaffolding deemed to be include in this item |
| 13 | Material and labour for applying two coats of acrylic distemper over a coat of primer, white or tinted over 0.75 to 1 mm thick wall care putty in two coat complete all as specified & directed. |
| 14 | Material and labour for two coats of Smartcare Damp Proof Advanced of approved colour consist of fiber reinforced elastomeric liquid applied waterproofing membrane, formulated with select elastomeric and resilient acrylic polymers and reinforcing synthetic fiber which forms a thick, seamless, durable membrane upon curing and offers ultimate waterproofing inlcluding preparation of surfaces to receive the coats as per manufacturer directions all as specified and directed. Make:- Asian Paints Product Coden 5457 or equivelent. |
| 15 | Material and labour for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement, including dismantling of existing plinth protection, complete all as specified and directed. |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete as directed and specified. |
| 17 | Material & labour for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in levelling course finished even and fair for laying floor finishes etc complete all as specified & directed. |
| 18 | Material and labour for Vitrified Ceramic tiles light shade 7-8 mm thick (square/rectangular) polished area of each tiles not exceeding 0.72 sqm in floor etc. over and including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry @3.00 Kg/Sqm and pointed in white or coloured cement to match with tile including dismantling of existing tiling complete all as specified and directed. |
| 19 | Description all as per item No 18 here in above but as in skirting and over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 20 | Material and labour for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 21 | Material and labour 20 mm thick Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry @ 3.0 Kg/Sqm and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed |
| 22 | Material and labour for non Skid ceramic tiles 7-8 mm thick(Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in coloured cement to match of coloured tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 23 | Material and labour for ceramic glazed colured/ design tile in vertical surfaces (300x 450mm) x 7mm thick such as dado and skirting etc set and jointed in neat cement slurry @ 3.0 Kg/Sqm and pointed in coloured cement to match coloured tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 24 | Taking down chowkats or frames with shutter exc. 1.5 Sq mtr but n exc. 4 Sqm each with shutters (without taking off shutters) from the frames, complete all as specified and as directed. |
| 25 | Taking down shutter of any description exc 1.0 sq.m but n.exc 2.00 Sqm each, complete all as specified and directed. |
| 26 | Supply & fixing factory made single extruded WPC(Wood polymer composite) Solid door frame/ chowkat of size 100X50 comprising of virign PVC polymer of K value 58-60 (suspension grade ) calcium corbonate and natural fibers ( wood powder/rice husk /wheat husk) and non toxic additives (max toxicity index of 12 to 100 gms) fabricated with mitred joints and applying PVC solvent cement and screwed with full body threaded star headed SS screws having min frame density of750Kg/cum screw withdrawal strength of 2200 N (face) & 1100 N edge,minimum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasterns / hold fast of required dia and length,colour of door frame to match that of shutter all as specified and directed |
| 27 | Supply and Fix factory made single extruded WPC (Wood polymer Composite) Solid moulded Flush Door Shutter of 30 mm size comprising of virgin PVC resin of K value 58-60 (Suspension Grade), Calcium Carbonate and natural Fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives (max toxicity index of 12 for 100 gms) having min density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) &900 N (Edge) Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being Termite/ Borer proof. Water/ Moisture Proof, Fire retardant and fixing with stainless steel but hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer - in- Charge, Materia test certificate and authentication should be compulsory provided by the manufacturing company. |
| 28 | Supply and fixing 30 mm thick WPC factory made Glazed and skeleton shutter (conforming as per IS-4020) made from 100% lead free single extruded open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed. |
| 29 | Supply and fixing of Ist Class hard wood, (Teak) Plain, solid straight Chowkats and Framed rebated on the solid, rounde or chamfered, put together with glue pinned at joints, Framed and Manufactured in situ. Noted:- The contractior shall bring the trunk of appropiate size as per directions of Engineer in charge at site and necessary cutting and manufacturing sall only be done at site. No factory made material allowed |
| 30 | Supply and fixing of 35 MM thick 1st Class hard wood (teak) manufactured in situ Glazed and skeleton shutters (single/Double) open reabted and prepared to receive glass, gauze, etc devided into squares, with plain chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, section 8 clause 8.24 (a). Note:- The contractor shall bring the trunk of appropriate size as per direction of Engineer in charge at site and necessary cutting and manufacturing shall onlybe done at site. No factory made material shall be allowed. |
| 31 | Material and labour for melamine clear polishing high gloss/matt finish in required colour/wooden shade texture on wooden surfaces of any description, width or girth with following sequence:-(a) Cleaning and preparing the surface with rubbing of dand paper 80/120 no & 160/80 respectively.(b) Applying two coat of sealer with spray gun and allowing sufficient drying time for 1 st coat and 2 nd coat to dry for 8 to 12hrs. (c)On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excessive sealer lyer and make the surface smooth after this wet rubbing, then surface is applied with special grade melaminefillers to fill all the small & big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on whihc again alight wet to be alowed to dry for 4 to 6 hrs on whihc again a light wet rubbing is done and this surface is further allowed to dry for 12 hrs(d) On this suface 1st coat melamine polish is applied with soray gun using mealmine clear polish and melamine thinner in required porpotion. This 1 st coat is allowed to dry for 24 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete all as directed. (Final coat to be done in 1 or 2 layers without gap of time) |
| 32 | Supply and fixing of 300 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed complete all as specified and directed. |
| 33 | Supply and fixing in repair of Brass handles, cast type, polished bright of size 125mm complete all as specified and directed. |
| 34 | Supply and fixing in repairs floor door stopper of brass body and tongue with hard drawn steel spring with overall length of cover plate 150 mm, fixed in floor complete all as specified and as directed. |
| 35 | Supply & fixing brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed of size 150mm fixed in positions complete all as specified & directed. |
| 36 | Supply & fixing 125mm long Butt hinges, heavy weight, cold rolled extruded Brass with mild steel Butt hinges, extruded brass, with mild steel hinge pin, bright polished complete all as specified and as directed. |
| 37 | Supply and fixing in repair of 150 mm long steelness steel handle, cast type,complete all as specified and as directed |
| 38 | Supply and fixing in repair of steelness steel tower bolt 200 mm long of extruded section etc complete all as specified and as directed |
| 39 | Supply and fix ss sliding door bolt size 300 mm with hasp, staple (bolt ype) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-Complete all as specified and directed. |
| 40 | Supply and Fix Butt hinges 100 mm size medium weight cold rolled stainless steel and fixed complete all as specified and as directed. |
| 41 | Supply and fixing in repair of Vitreous China wash hand basin, white, of size 550mm x 400 mm Pedestal type, 32 mm dia brass waste coupling and 32 mm dia PVC waste pipe, pillar tap including fixing of tap, waste fitting etc complete all as specifed and directed. |
| 42 | Supply and fixing in repair of vitreous Chaina Wash Basin counter Top 600x400x185 mm including stainless steel bottle trap and 40 mm dia GI pipes up to floor trap complete all as specifed and directed. |
| 43 | Supply and fixing in repair brass chromium plated Exposed prt kit of single lever WHB Mixture wall mounted consisting of operation level, wall flange, nipple and supot (suitable for item ALD-233) complete all as specified and directed. |
| 44 | Supply and Fixing in repair of 600 mm x 450 mm x 6 mm thick bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 45 | Supply and Fix for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; staircase; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed. |
| 46 | Supply and fixing in repair of 15mm dia brass chromium plated centre hole wash basin/ sink mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. |
| 47 | Supply and fixing in repair of stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed |
| 48 | Supply and fixing in repair of tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed |
| 49 | Supply and Fix fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed. |
| 50 | Supply and Fix fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed. |
| 51 | Supply and fixing in repair of health faucet mild steel chromium plated suitable for 15mm dia pipe with 1 or 1.25mtrmetre long flexible tube and ABS wall hook fixed to wall all as specified and directed |
| 52 | Supply and fixing in repair of 75 mm bore UPVC (SWR) bends any radius, complete all as specified and directed. |
| 53 | Supply and fixing in repair of stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed |
| 54 | Supply and fixing of fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed. |
| 55 | Supply and fixing of 110mm bore PVC (SWR) bend of any radius fixed complete all as specified and directed. |
| 56 | Supply and fixing of 110mm dia bore PVC (SWR) pipe single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as directed. |
| 57 | Supply and fixing of 75mm dia bore PVC (SWR) pipe single socketed, in any length with rubber ring joints fixed incl clamps for fixing to wall complete all as directed. |
| 58 | Supply and fixing of 75mm bore PVC (SWR) bend of any radius fixed as directed. |
| 59 | Supply and fixing of PVC110 mm (SWR) junction single,(Single T) equal or unequal complete all as directed. |
| 60 | Supply and fixing of 75mm bore PVC (SWR) couplers for PVC pipe to join two pipe in series complete all as specified and directed |
| 61 | Material and labour for PCC (1:4:8 ) type D-2 as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed. |
| 62 | Supply and fixing of 150 mm Salt glazed stoneware drain pipes, IS mark complete all as specified and diirected |
| 63 | Supply and fix in repairs vitreous chinaware wash down water closet pan fency type including fixing bolt, and flushing cistern, Dual flush single piece wall mounting EWC with soft close seat cover fittings 'P' or 'S' trap complete all as specified and directed. |
| 64 | Supply and fixing in repair of PVC connection of 45 cm length including brass nuts complete all as specified and as directed |
| 65 | Dismantling block board/ boarding of any description and in any position complete including iron mongries ,complete all as specified and directed. |
| 66 | Supply & fix 18 mm thick PVC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive ,complete all as specified and directed. |
| 67 | Supply & fix 6 mm thick PVC board both side plain white colour as in cub board selves etc fixed with screws, salvent cement/ adhessive , complete all as per specifications & directed. |
| 68 | Supply and fixing of magnetic catcher and striking plate including letting in and fixed, complete all as specified and directed. |
| 69 | Supply and fixing of continuous (PIANO) hinges, mild steel, bright finish or electrogalvanised 30 mm width of flaps (when open) complete all as specified as directed. |
| 70 | Supply and fixing in repair of SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum), complete all as specified and directed. |
| 71 | Supply and fixing of rotational moulded polyethylene water storage tanks of capacity 500 litres tripple layer, not less than 18 Killogram (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. |
| 72 | Supply and fixing of rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks of weight not less than 33 Killogram (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut complete screwed down for iron pipe of 20 mm dia including dismantling of old tank complete all as specified and directed. |
| 73 | Supply and fixing of factory made steel windows (Box type) with side hung shutters precoated (colourcoated/ powder coated) with double shutters (glazed and gauged shutter bothn ) with frame complete all as specified and directed and shown on drg TD 158 sheet 1/2 & sheet 2/2 . NOTE :- Measurements shall be tken and paid compositly for frame, glazed and gauged. Grill shall be measured and paid seperately under respective item. No extra claim shall be entertained on this ground |
| 74 | Supply and fixing of for steel ventilator fixed (Box type) with side hung/top hung shutters precoated (colourcoated/ powder coated) with double shutters (glazed and gauged shutter bothn ) with frame complete all as specified and directed and shown on drg TD 158 sheet 1/2 & sheet 2/2 . NOTE :- Measurements shall be tken and paid compositly for frame, glazed and gauged. Grill shall be measured and paid seperately under respective item. No extra claim shall be entertained on this ground |
| 75 | Supply and fixing of sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed. |
| 76 | Supply and fixing of 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and directed. |
| 77 | Supply and fixing of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed |
| 78 | Supply and fixing of 100 mm bore cast iron Bends of (any radius), spun pipe (conforming to IS 3989) diminishing piecs or tapers (larger bore measured) complete all as specified and as directed |
| 79 | Supplying, fixing, jointing and testing 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) complete and jointed, tested and fixed to wall and ceiling or laid in floors, complete all as specified and directed |
| 80 | Supplying, fixing, jointing and testing 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) complete and jointed, tested and fixed to wall and ceiling or laid in floors, complete all as specified and directed |
| 81 | Taking up or down 15 mm steel tubing and connections complete all as specified and directed. |
| 82 | Taking up or down 20 mm steel tubing and connections complete all as specified and directed. |
| 83 | Supply and fixing in repair of 20 mm ball brass valve high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and directed. |
| 84 | Supply and fixing in repair of 15mm bore Bib taps cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed. |
| 85 | Supply and fixing in repair of pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed, complete all as specified and directed. |
| 86 | Supply and fixing of approved colour powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, window, ventilator with one or more rebates or aluminum section of two or more tracks incase sliding windows including jointing cleat for fixing complete all as specified and directed. |
| 87 | Supply and fixing of approved colour powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 88 | Supply and fixing of approved colour powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium handles 2 Nos in each door, hinges, powder coated aluminium snap beading, screws etc. complete all as specified |
| 89 | Surface excavation n exc 30 cm deep and averaging 15 cm and getting out in any type of soil complete all as specified. |
| 90 | Removing excavation material surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified & directed. |
| 91 | Material and labour for 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed. |
| 92 | Material and labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 93 | Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, set and jointed in grey cement and pigment complete all as specified and directed. |
| 94 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custodyor for taking credit (credit for above items should be made as per conditions separately) and makinggood disturbed surfaces of walls, floors, etc complete all as directed. |
| 95 | Dismantling and taking down carefully sub-main wiring/service wire of any size including wooden batten etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc complete all as directed. |
| 96 | Dismantling and taking down carefully existing DB’s any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as directed. |
| 97 | Dismantling and taking down carefully existing MCB of any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc complete all as directed. |
| 98 | Dismantling and taking down carefully existing MCCBs of any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc complete all as directed. Please Enable Macros to View BoQ information |
| 99 | Dismantling and taking down carefully existing MCCBs of any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc complete all as directed. Please Enable Macros to View BoQ information |
