|
| 1 | M&L for preparation of plastered or un plastered old decorated surfaces of walls by removal of nails etc & filling cracks/hole and applying two coats of oil bound distempering of required shade and colour in two coats complete, as per manufacturer's specification. complete all as specified & directed by Engineer-in-Charge. |
| 2 | M&L for complete removal of existing treatment and preparation of plastered or un plastered old decorated surfaces of ceiling by filling cracks/hole by applying wall care putty for smooth surface and applying one coat oil emulsion distemper white or coloured complete all as specified & directed by Engineer-in-Charge. |
| 3 | M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 4 | M&L for preparation of old painted surfaces of steel & steel based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 5 | M&L for preparation of plastered or un plastered of old decorated external surface of walls, spoiled by smoke soot, moulds, mass and efflorescent salts and trading oily and greasy spots by scraping and washing with water and for applying two coats of Acrylic exterior emulsion paint with Silicone additives of including priming coat in camouflage pattern or more shades as directed by Engr-in-Charge incl necessary scaffolding and other safety arrangement to work at any height at site if required.complete all as specified and as directed by the Engr-in-Charge. |
| 6 | M&L for preparation of old decorated external surface of CGI roofs sheet and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oily and greasy spots by scraping for applying two coats of synthetic enamel paint on roof sheet in camouflage pattern or more shades as directed by Engr-in-Charge incl necessary scaffolding and other safety arrangement to work at any height at site if required.complete all as specified and as directed by the Engr-in-Charge. |
| 7 | M&L for complete removal of existing surface and preparation old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oily and greasy spots by scraping and washing with water and applying two coat of white wash including filling cracks repairing minor damages in plasters complete all as specified and as directed by the Engr-in-Charge complete all as specified and as directed by the Engr-in-Charge |
| 8 | Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified. |
| 9 | Material and labour for 15mm thick cement plaster in CM 1:4 fair faces of brick work or concrete surfaces, even and smooth without using extra cement mixed with water proofing compound @ 200ml per 50Kg cement as per manufacturers instructions complete all as specified and directed by Engineer-in-Charge (WPC shall be measured and paid separately). including finishing even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 10 | Supply only liquid water proofing compound complete all as specified and directed . |
| 11 | M&L for 5 mm thick rendering in cement mortar 1:3 by using manufacture/washed plaster sand on fair faces of concrete/ceiling surfaces, including finishing even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 12 | M&L for 10 mm thick rendering in cement mortar 1:6 by using manufacture/washed plaster sand on other than fair faces of brick or concrete surfaces, including finishing even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 13 | M&L preperation of newely plastered surface and Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) in camouflage pattern (four) or more shades as directed by Engr-in-Charge incl necessary scaffolding and other safety arrangement to work at any height at site if required. |
| 14 | M&L for preparation of newely plastered surface and applying wall putty of 1.5 mm thickness over plastered surface to prepare the surface even and smooth applying two coats of oil bound distempering of required shade and colour, of approved manufacturer, complete, all as per manufacturer's specification. by auto roller complete all as specified & directed by Engineer-in-Charge. |
| 15 | M&L for single component polymer modified repair mortar with compressive strength minimum 38 MPA at 28 days (ASTM C 109:99) and tensile strength minimum 2.5 Mpa (ASTM C 307) in a single coat @ including Applying epoxy bonding agent and making good with polymer modified plaster and micro concrete as required thickness over a coat of rust removing alkaline primer and match the finishing to the existing surface as following given below Modified plaster 10 mm to 20 mm thick as per manufacturer instructions complete all as directed. Make Fosroc, Sikka or equivalent. |
| 16 | Demolition of reinforced Concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work. |
| 17 | M&L reinforced cement concrete (nominal mix) type B1 1:2:4 using 20 mm graded stone aggregate as in chajjas, facia and other RCC str etc complete all as specified and as directed by Engineer-in-Charge.. |
| 18 | M&L Formwork to chullah hoods, chajjas, troughs and similar items including edges on flat surface complete all as specified and directed. Please Enable Macros to View BoQ information |
| 19 | M&L Formwork to chullah hoods, chajjas, troughs and similar items including edges on flat surface complete all as specified and directed. Please Enable Macros to View BoQ information |
