|
| 1 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 3 | Dismantling of timber scantling in fillets, rails, posts, rafters, purlins etc 40 sqcm and over in section, in any posotion for unframed works complete all as specified and directed. |
| 4 | Demolition of brick work, built in Cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 5 | S&F pre- painted galvalume aluminum zinc coating GI Based plain Corrugated sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed. |
| 6 | S&F pre- painted galvalume aluminum zinc coating GI Based plain steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified & directed |
| 7 | S&F rolled mild steel work as in rafter, purlins, trusses and like (beam, tee, angle, channel or flat sections (Fe 410-W(Gde E-250 quality) complete all as specified and directed. |
| 8 | M&L for applying two coat of synthetic enamel paint on steel surfaces including red oxide zinc chromate primer as exc 10 cm girth or width including prepration of new steel surfaces complete all as specified and directed |
| 9 | M&L prepration of old steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of zinc chromate primer complete all as specified and directed. |
| 10 | M&L for brick work with fly ash bricks (modular size bricks), straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed. |
| 11 | M&L for 15 mm thick rendering brick or concrete surface of walls in CM 1: 6 finishing the surfaces fair & even without using extra cement complete all as specified and directed. |
| 12 | M&L for 15 mm thick rendering brick or concrete surface of walls in CM 1: 6 finishing the surfaces fair & even without using extra cement complete all as specified and directed. |
| 13 | M&L for complete removal of existing treatment on wall surfaces and applying two coats oil bound distemper over one coat of primer as approved complete all as specified and directed. |
| 14 | M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and as directed. |
| 15 | M&L for preparation of newly plastered surfaces of walls and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed. |
| 16 | M & L for dampness rectification on Wall Area :- Surface Preparation: Removing existing putty/plaster/POP surface from the affected wall with wire brush/grinder/hammer etc up to brick level, filling of crack fill paste in visible cracks and apply two coats of DAMP STOP ELASTO (MAKE : BERGER or Equivalent) over finished surface. Necessary scaffolding suitable for height upto 10.00 mtr from average ground level complete all as specified and as directed. NOTE: Execution of work shall be with special applicator as per OEM specification and contractor shall submit MoU with OEM to GE for approval before execution of the work) |
| 17 | All as per item above but One coat of Exterior weather proof emulsion paint over a coat of primer on old prepared wall surfaces incl chajja, patta etc. surfaces where dampproof treatment has been done. complete all as specified and directed. |
| 18 | M&L for applying one coat of white waterproof wall putty 1mm thick on walls complete all as specified and directed. |
| 19 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 20 | Providing & fixing false ceiling at all heights with semi perforated 12mm thick micro tegular GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and complete all as specified and directed. |
| 21 | M&L for 75 mm thick PCC 1:3:6 type C2 , (using 40 mm graded stone aggregate) as in plinth protection,aprons, hard standing, path and like including finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 22 | M&L for hard core of broken stone of gauge not exceeding 63 mm, deposited, spread & levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces complete all as specified and directed. |
| 23 | S & F plain galvanized mild steel sheeting 0.63 mm thick in ridge hips valley gutters drips and straight flashing welded or soldered joint complete all as specified and directed. |
| 24 | S&FBands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 25 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 26 | M&L glazed coloured ceramic tiles in vertical surface 450x300x7mm thick as in skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match and including 10mm thick backing coat in CM 1:6 etc complete all as specified and directed. |
| 27 | M&L for Vitrified ceramic coloured (dark) double charged tile 8-10mm thick,area of each tile exc 0.42 sqm but n.exc. 1.00 sqm each as in floors over and including 15 mm thick screed bed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified & directed |
| 28 | M&L for Virified Ceramic tiles 8-10 mm thick, area of each tiles exc 0.42 sqm but n.exc. 1.00 sqm, in Vertical wall incl joints filled with epoxy set and jointed over and including 10 mm thick rendering even and rough in CM1:4 for backing of tiles, jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed. |
| 29 | M&L for Heavy duty flooring tiles , harsh weather & UV resistance, high abrasion resistance, MOH hardness >6 thickness 10 mm thick , area of each tile not less than 0.09 sqm , anti slip type laid in floors , steps, edges etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15 mm thick rendering in cm 1:4 and dismantling of exiting tiles complete all as specified and directed |
| 30 | M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation , filling, subbase and mass incl Demolition of cement concrete in floors and pavings not exc. 15 Cm thickness (below/above ground level) including floor finishesconcrete complete all as specified and directed. |
| 31 | S& F in repairs vitreous china urinal, full stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, 32mm dia PVC waste pipe, inlet ,outlet etc complete all as specified and directed. |
| 32 | S&F Vitreous China Oval shaped cunter top Wash Basin, white , flat back, Size 550x400mm / std size including waste pipe , coupling, PVC pipe connection 15mm dia 600mm long complete all as specified and directed. |
| 33 | S&F in repairs 15 mm bore fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 34 | S&F China wash down water closet pan (Pedestal Pattern), white , pedestal pan and 'P' or 'S' trap , plastic water closet seat , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 35 | S&F in repairs vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding complete all as specified and directed. |
| 36 | S&F in repair for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets complete all as specified and directed. |
| 37 | S&F in repairs fancy type bib taps chromium plated 15 mm dia cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule, complete all as specified and directed. |
| 38 | S&F in repairs fancy type chromium plated stop valves 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 39 | S&F in repair 15 mm dia PVC connection of length 450mm long complete all as specified and directed. |
| 40 | S&F in repairs 2-Way Bib cock with wall flange, complete all as specified and directed. |
| 41 | S&F in repair health faucets CP with 1.2mtr long CP flexible pipe complete all as specified and as directed.. |
| 42 | M&L Granite 16-18 mm thick (of any type) work (machine cut) in steps, jambs, pillar, window-cills, cooking platform and like in 15 mm thick cement mortar (1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in cm 1:4 incl Dismantling of stone slabs and tiles of any description or thickness in floors, aprons, walls, etc, laid bedded and pointed in any mortar complete all as specified and directed. |
| 43 | S&F 15mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors incl Taking up or down 15mm bore GI steel tubing and connections, including cleaning for refixing or removal to store and cutting chases, pinning in whereever reqd and make good in cm 1:3. complete all as specified and directed. |
| 44 | S&F 20 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors incl Taking up or down 20 mm bore GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed and cutting chases, pinning in whereever reqd and make good in cm 1:3 complete all as specified and directed. |
| 45 | M & L for fabricating and fixing powder coated (Minimum 50 miciron ) aluminium sections of required size for doors, windows any type, frames and partitions including aluminium hinges of required size jointing cleats, screws salsh fasterners , plug for fixing with walls, column etc including taking down damage portion of damage door, windows or taking down complete door/ window complete all as specified and directed.Note :- Rates are inclusive of necessary new fitting for door/ window i.e handle, tower bolt, butt hinges etc complete |
| 46 | M&L framed work such as grills, gratings, gate etc with ends of bars souldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified and directed. |
| 47 | S&F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to uPVC door with beading complete all as specified and directed. |
| 48 | S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to uPVC door with beading complete all as specified and directed. |
| 49 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels complete all as specified and directed |
| 50 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc .50 sqm in each panels incliduing hacking out old broken glasses complete all as specified and directed. |
| 51 | Taking down chowkhats or frame with shutter n.exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 52 | S & F Solid PVC door frame of size 50 mmx 47mm made out of 5 mm plain colour PVC sheet reiforced with MS square tube and fixing in opening as per manufacturer instruction complete all as specified and directed. |
| 53 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR-2004 Part - II, complete all as specified and directed. |
| 54 | Taking down chowkhats or frame with shutters exc 1.5 Sqm but not exc. 4.00 Sqm each (without taking off shutters from the frame) complete all as specified and directed |
| 55 | Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applyingPVC solvent cement and screwed with fullbody threaded star headed SS screwshavingminimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 modules ofelasticity 900 N/mm2 and resistance tospread of flame of Class A category withproperty of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. →Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall beacceptable. Variation in profile dimensionson plus side shall be acceptable but no extrapayment on this account shall be made. |
| 56 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mmsizecomprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screwwithdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2and resistance to spread of flame of Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunkS.S screws, all as per direction of Engineer-In-Charge. |
| 57 | S&F 100 mm mild steel butt hinges medium weight,cold rolled complete all as specified and directed |
| 58 | S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed |
| 59 | S&F 150mm Aluminium anodised barrel tower bolts extruded section and fixed complete all as specified and directed. |
| 60 | S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 61 | M&L for two coats of synthetic enamel paint over one coat of pink primer over 10cm width or girth on wooden surface incl prep complete all as specified and directed. |
| 62 | Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 63 | S&F PVC (SWR) pipe 75mm bore single socketed, in any length with rubber ring joints, fixed in walls / laid in trenches/floors complete all as specified and directed. |
| 64 | S&F PVC (SWR) 75mm bore bends any radious complete complete all as specified and directed. |
| 65 | S&F PVC (SWR) junction single, (SingleT) 75mm bore equal or unequal complete all as specified and directed. |
| 66 | S&F in repairs PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints laid in trenches , floors or fixed in walls complete all as specified and directed. |
| 67 | S&F PVC (SWR) 110mm bore bends any radious complete all as specified and directed. |
| 68 | S&F PVC (SWR) Junction (Single T) 110mm bore equal or unequal. complete all as specified and directed. |
| 69 | M&L 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 70 | S &F in repair Floor door stopper 150mm long of aluminium ally body and tonge , anodised , with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 71 | S & F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 72 | S&F in repair 12 mm thick vertical toughened glass as in door shutters / partition with including stainless steel SS-304 patch fitting fixed with Anchor fastner, stainless steel handles, each glass panes shall be exceeding 1.5sqm, but not exceeding 2 sqm each, all edges of glass shall be diamond polished of make as approved by GE complete all as specified and directed. |
| 73 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. |
| 74 | M&L for Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor -stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with sheel metal ms flesh box, white cover plate with frame for fixing modular switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed. |
| 75 | All as per item No.74.00 here -in- before but wiring with 2.5 Sq mm FRLS mutistranded copper conductor cable for 5/15 amp switch socket combination on independent board and with 2.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed. |
| 76 | All as per item No.74.00 here -in- before but wiring with 4.0 Sq mm FRLS mutistranded copper conductor cable for 5/15 amp switch socket combination on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed. |
| 77 | All as per item No 74.00 above, one 3 pin socket outlet 5 Amps on same board complete all as specified and directed. |
| 78 | All as per item No.47.00 above, but 3 pin socket outlet 5 amps on independent board elect wiring 1.5 sq mm complete all as specified and directed. |
| 79 | S&F Modular Switch piano, flush type, single pole, one way, 6 Amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed. |
| 80 | S&F in repairs Ceiling rose surface bakelite, three terminals, 240V, 50Hz, ISI marked complete all as specified and as directed. |
| 81 | S&F Modular Socket outlet, 2 module, multipurpose having provision for 2 & 3 pin, 6 Amp flush type, 240 volt AC complete all as specified and as directed. |
| 82 | S&F Modular Switch piano, flush type, single pole, one way, 16 Amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed. |
| 83 | S&F Modular Socket outlet, 2 module, multipurpose having provision for 2 & 3 pin, 16 Amp flush type, 240 volt AC complete all as specified and as directed. |
| 84 | S & F lamp holder PVC/polycarbonate type with back plate suitable for batten fittings with 9 Watt LED Bulb complete all as specified and directed. |
| 85 | Taking down and Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Note :- Old/unserviceable ceiling fans to be deposited at MES Store yard |
| 86 | M&L for taking down ceiling/Wall mountan fans of any make, size 1200 mm/1400mm sweep and re-hanging the same after servicing, lubricating with fresh grease, etc. complete all as specified and directed. |
| 87 | A Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 88 | Taking down existing u/s fitting any type any size and Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 89 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 90 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete complete all as specified and directed |
| 91 | S & F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 12 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed. |
| 92 | S & F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 08 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed. |
| 93 | S & F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 04 way Single door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed. |
| 94 | S & F in repairs MCB SPN suitable for 240 volts, AC supply 32 Amps, C Curve, with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed. |
| 95 | S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' Curve including connection with suitable size aluminium / copper lugs complete all as specified and directed. |
| 96 | M&L for Sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in non metallic rigid PVC conduit of size 25 mm dia ISI marked including PVC insulated unsheathed 4 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete all as specified and directed. |
| 97 | M&L for Sub main wiring with two single core FRLS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in non metallic rigid PVC conduit of size 25 mm dia ISI marked including PVC insulated unsheathed 4 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly complete all as specified and directed. |
| 98 | S&F in replacement sheet metal earth plug & socket, single pole and neutral with and including 1no. single pole MCB 20 Amps 240 volts complete all as specified and directed. |
| 99 | Supply and fixing factory made epoxy powder coated Distribution Board TP & N 4 ways ( VTPN MCCB DB ) and space for MCCB as incomer, with metal door ( IP-43 protection ) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including isolated Neutral Bar, Insulated busbar assembly, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified and directed. |
| 100 | S&F MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA including connection with suitable size aluminium / copper lugs complete all as specified and directed. |
| 101 | Taking down & Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louver complete all as specified and directed. Note :- Old/unserviceable ceiling fans to be deposited at MES Store yard |
| 102 | Earthing complete with galvanised steel earth plate electrode 60×60cm×6mm thick, buried directly in ground (earth pit not less level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron earth wire of 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 SSR including earth pit in any soil char coal common salt , 15 mm all around earth plate PCC (1:3:6) type culprit, with 40 x40x6 mm angle iron frame and PCC cover (1:2:4) type B1 , water pipe funnel and GI protection pipe light grade 15mm dia upto panel connecting earth lead to panel complete all as specified and directed. Note : Earth continuity conductor including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate. |
| 103 | Excavation in trenches nexc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/ loose for laying cables, erection of poles complete all as specified and directed. |
| 104 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed. |
| 105 | Removing surplus excavated soil nexc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point complete all as specified and directed. |
| 106 | Sand cushioning/sand covering for underground cable protection complete all as specified and directed. |
| 107 | Supplying and laying Class LV, Type I, flat, size 250mm x 150mm x 40mm for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed. |
| 108 | Takng down old unservicable cable and Supply and Laying XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 50x3.5 sqmm, laid in trenches/floor or fixed on wall/pole complete all as specified and directed. |
| 109 | GI Tubes, 'light grade' galvanised, with all fitting and laid in floors, under road, pavement or hard standing steel water tubing bore of tube 25 mm complete all as specified and directed. |
| 110 | Taking up or down steel tubing and connection including cleaning for refixing or removal in store all as specified and directed of following size:- |
| 111 | 25 mm bore |
| 112 | 20 mm bore |
| 113 | Supply , fixing & laying in repairs GI tubing medium grade with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittings for laid in trenches/wall/ceiling/ floor/ all as specified and directed of following size:- |
| 114 | 25 mm bore |
| 115 | 20 mm bore |
| 116 | Taking out UNSV Gun metal globe & S&F Gun metal globe or gate valves, conf to IS 778 with iron wheel head, screwed both ends for iron pipe and fixed in existing or new position for following size:- |
| 117 | 25 mm bore |
| 118 | 20 mm bore Please Enable Macros to View BoQ information |
