|
| 1 | Supply and erection of fancy/ decorative lights of following types / specifications including making connection, testing and commissioning etc. as selected by occupant of house. The job includes cost of LED lamps, suitable rating copper wire for making connection with existing light point and all petty material are required to complete the job to the entire satisfaction of Engineer-in-charge. The color and wattage of the lamp shall be as per the requirement of occupant of the house. The LED lamp should be make Philips/ Wipro/ Havells/ Bajaj only. |
| 2 | Single Arm Wall Light with brass base Lamp |
| 3 | Double arm Wall Light with brass base Lamp |
| 4 | Hanging Light for Gajibo |
| 5 | Chandelier with 8 nos. Arms brass coated light |
| 6 | Spike Light |
| 7 | Up Down Light |
| 8 | Supply & erection of fresh air fan high speed motor with copper wound 10” sweep with louver and plastic body complete with high speed motor, blades, epoxy powder coated of Havells make Ventiliar DX White / Orient make Ventilator / Crompton make Brisk Air/ Bajaj make 70049 250mm sweep only. (As per Complete Item No. 1 of the DNIT) |
| 9 | DSR ITEM NO. 9.2Brush Less Direct Current (BLDC) MotorSupply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal (Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, (As per Complete Item No. 1 of the DNIT) |
| 10 | 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 11 | 1400mm, service value ≥ 6.0 CM/Min/Watt, air delivery 245 CM/Min (Minimum) |
| 12 | DSR Item No.1.21Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 13 | DSR Item No. 1.17Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 14 | 3 x 1.5 sq. mm |
| 15 | 3 x 2.5 sq. mm |
| 16 | DSR Item No. 1.10Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 17 | Group B |
| 18 | DSR item No.1.31Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 19 | DSR item No.1.32Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 20 | DSR item No.1.25Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 21 | DSR ITEM NO. LED 8.9.5Batten light (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, (As per Complete Item No. 1 of the DNIT) |
| 22 | 18-22 watt |
| 23 | DSR Item No. 8.13.7LED Street light fixture, powder coated pressure die cast aluminum body (System lumen efficacy ≥120 <135 lm/Watt)Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -5 deg to 50 deg centigrade, (As per Complete Item No. 11 of the DNIT). |
| 24 | 25 Watt |
| 25 | DSR Item No. 8.16.3LED Flood Light, powder coated pressure die cast aluminum (System lumen efficacy ≥120 and <135 lm/Watt)Supplying, installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, (As per Complete Item No. 12 of the DNIT) |
| 26 | 100 Watt |
| 27 | DSR Item No. 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 28 | Single pole |
| 29 | Triple pole and neutral |
| 30 | DSR Item No. 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB/ RCCB/ Isolator). |
| 31 | 8 way (4 + 24) Double door |
| 32 | S/E of 8 way/ 10 way indicating call bell including making connection testing and other petty material required to complete the job to the entire satisfaction of Engineer-in-charge. The indicator should be of reputed make only. |
| 33 | Supply & erection of Exhaust Fan (heavy duty motor with copper wound metallic body) following size complete with motor, metallic blades, double ball bearing with minimum power consumption, (As per Complete Item No. 16 of the DNIT). |
| 34 | Size 12” Sweep 900 RPM with louver of Havells make Turbo Force SP / Orient make Industrial Heavy Duty / Crompton make EXHD 300-6-1/ Bajaj make Supreme PLUS/ Usha make Turbo HDEF only. |
| 35 | Supply and Erection of 9 Watt filament Lamp suitable for existing E-27, E-40, E-14 or Pin type holder. The lamp should be of Philips / Osram / Bajaj / Wipro / Twinkle make only. The job includes the cost of all other petty 0 material etc. As reauired to complete the job to the entire satisfaction of Engneer-in-charge. The color and wattage of lamp should be as selected by the occupant. |
| 36 | Supply & erection of Cabin Fan 16” sweep oscillating type complete with blades & regulator. The fan should have 2 of pull cord switches, one for oscillation and one for speed regulation. (As per Complete Item No. 18 of the DNIT). |
| 37 | Supply and erection of door for sheet metal cubical pedestal of dimensions 1250 mm X 950 mm X 350 mm covered with 1.6 mm thick M.S. sheet duly welded on five sides and front side hinged complete with locking arrangement. The job includes to cost of carriage, erection, labour charges and other petty material required to complete the job to the entire satisfaction of the EIC. Please Enable Macros to View BoQ information |
