|
| 1 | Dismantling manually/ mechanically including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: i) Water bound macadam road. (Quantity is subjected to actual requirement at site) |
| 2 | ii) Bituminous road. (Quantity is subjected to actual requirement at site) |
| 3 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: (Quantity is subjected to actual requirement at site)i.) All kinds of soil |
| 4 | Ordinary Rock |
| 5 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth with lead of 1 meter fromcutting edge as directed: (Quantity is subjected to actual requirement at site)i.) All kinds of soil.) |
| 6 | Ordinary Rock |
| 7 | Supply/providing of M.S fittings viz bends of suitable degrees / size to be fabricated out of 8mm to 10mm thick MS. plate as per the requirement of site. The fittings should be painted with Anticorrosive Red Oxide Primer and is incld. all carriages, leads lifts, etc. complete.(Quantity is subjected to actual requirement at site) |
| 8 | Supply of fitter / labours.i. Fitter |
| 9 | Asstt. Fitter |
| 10 | Labour |
| 11 | Dismantling C.I/D.I pipes manually / by mechanical means breaking lead caulked joints, melting of lead and making into blocks incl. stacking of pipes at site within 50m lead as per direction of Engineer-In-charge I/C excluding excavation and refilling trenches after taking out the pipes.(Quantity is subjected to actual requirement at site)i. Upto 150mm diameter. |
| 12 | ii. Above 150mm dia. Upto 300mm dia. |
| 13 | iii. Above 300mm diameter. |
| 14 | Supply and Filling of trenches by GSB / Nallah Muck from approved source including all carriages upto actual site of work. The material shall be natural having durable particles graded from fine to coarse in a uniform combination with no boulders larger than 80mm in size. It shall not contain excessive quantity of loam. The item including ramming, consolidation in layers, charges of T&P, equipment’s etc. required for completion of job.(Quantity is subjected to actual requirement at site). |
| 15 | Supply and filling of 2nd class sand / stone dust around pipes at different spots including cost of material i.e. stone dust from available approved source including all carriages, leads and lifts upto the site of work including spreading of stone dust, levelling dressing and watering including compaction after each 15cms thickness in all respects. Complete Job. (Quantity is subjected to actual requirement at site). |
| 16 | Removing of Sluice Valves at any spots including replacing of same after rectification of damages to rods or other accessories including dewatering as well as making of temporary arrangements of Sluice Valve during repairs including all carriages from site to workshop and back to site complete job.(Quantity is subjected to actual requirement at site).i. 100mm dia. |
| 17 | i. 150mm dia. |
| 18 | ii. 200mm dia. |
| 19 | iii. 300mm dia. |
| 20 | iv. 350mm dia. |
| 21 | 400mm dia. |
| 22 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. (Quantity is subjected to actual requirement at site). |
| 23 | Welding of pipe / pipe fittings by way of engaging generator, welding set including all types of carriage involved. (Complete Job) (Quantity is subjected to actual requirement at site). |
| 24 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. (Quantity is subjected to actual requirement at site). |
| 25 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-charge: 1:3:6 or richer mix (i/c equivalent design mix). (Quantity is subjected to actual requirement at site). |
| 26 | Providing and laying of dry stone soling in foundation/trenches hand packed and consolidated by hand ramming including all carriages upto site of work saddle/anchor/thrust blocks. (Quantity is subjected to actual requirement at site). |
| 27 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). (Quantity is subjected to actual requirement at site). |
| 28 | Structural steel work in built up sections for angles, channels, girders, gusset plates etc, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required. (Quantity is subjected to actual requirement at site).i)In stringers, treads, landings etc. Of stair cases, including use of chequered plate wherever required, all complete. |
| 29 | ii)In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 30 | Reinforcement for R.C.C. work including straightening cutting, bending, placing in position and binding all complete (TMT BARS) (Quantity is subjected to actual requirement at site). |
| 31 | Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, etc. for concrete including all carriages. (For saddle/anchor/thrust blocks). (Quantity is subjected to actual requirement at site). |
| 32 | Providing and laying in position reinforced cement concrete 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size crushed stone agg) excld. the cost of centering, shuttering and reinforced steel.) upto plinth level for saddle/anchor/thrust blocks. (Quantity is subjected to actual requirement at site). |
| 33 | Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered): (Quantity is subjected to actual requirement at site).i. Depth exceeding 1.5m but not exceeding 4.50 m |
| 34 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.(Quantity is subjected to actual requirement at site). |
| 35 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: (Quantity is subjected to actual requirement at site).i. In cement mortar. |
| 36 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar(Quantity is subjected to actual requirement at site). |
| 37 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead.(Quantity is subjected to actual requirement at site). |
| 38 | Labour for cutting C.I. pipe with steel saw. i. 80 mm diameter C.I. pipe |
| 39 | i. 100 mm diameter C.I. pipe |
| 40 | ii. 125 mm diameter C.I. pipe |
| 41 | iii. 150 mm diameter C.I. pipe |
| 42 | iv. 200 mm diameter C.I. pipe |
| 43 | v. 250 mm diameter C.I. pipe |
| 44 | vi. 300 mm diameter C.I. pipe |
| 45 | vii. 350 mm diameter C.I. pipe |
| 46 | viii. 400 mm diameter C.I. pipe |
| 47 | ix. 450 mm diameter C.I. pipe |
| 48 | x. 500 mm diameter C.I. pipe |
| 49 | xi. 600 mm diameter C.I. pipe |
| 50 | 700 mm diameter C.I. pipe |
| 51 | Providing, fixing of M.S flanges by welding including cost of cutting making both holes made out of 10/14mm thick M.S plate to the pipes of different dia’s and including cost of nuts, bolts, washers etc. (Complete Job).(Quantity is subjected to actual requirement at site).i. 80mm dia. |
| 52 | i. 100mm dia |
| 53 | ii. 150mm dia |
| 54 | iii. 200mm dia |
| 55 | iv. 250mm dia |
| 56 | v. 300mm dia |
| 57 | vi. 400mm dia |
| 58 | vii. 450mm dia |
| 59 | viii. 500mm dia |
| 60 | ix. 600mm dia |
| 61 | x. 700mm dia |
| 62 | xi. 750mm dia |
| 63 | 800mm dia. |
| 64 | Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead.(Quantity is subjected to actual requirement at site).i. 100 mm dia. Pipe |
| 65 | i. 125 mm dia. Pipe |
| 66 | ii. 150 mm dia. Pipe |
| 67 | iii. 200 mm dia. Pipe |
| 68 | iv. 250 mm dia. Pipe |
| 69 | v. 300 mm dia. Pipe |
| 70 | vi. 350 mm dia. Pipe |
| 71 | vii. 400 mm dia. Pipe |
| 72 | viii. 450 mm dia. Pipe |
| 73 | ix. 500 mm dia. Pipe |
| 74 | 600 mm dia. Pipe |
| 75 | Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe).(Quantity is subjected to actual requirement at site). |
| 76 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket. (Quantity is subjected to actual requirement at site).i. 100 mm dia pipes |
| 77 | i. 150 mm dia pipes |
| 78 | ii. 200 mm dia pipes |
| 79 | iii. 250 mm dia pipes |
| 80 | iv. 300 mm dia pipes |
| 81 | v. 350 mm dia pipes |
| 82 | vi. 400 mm dia pipes |
| 83 | vii. 450 mm dia pipes |
| 84 | viii. 500 mm dia pipes |
| 85 | ix. 600 mm dia pipes |
| 86 | x. 650 mm dia pipes |
| 87 | xi. 700 mm dia pipes |
| 88 | 800mm dia pipes |
| 89 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. (Quantity is subjected to actual requirement at site).i. 15 mm and 20 mm dia. G.I. pipes |
| 90 | i. 25 mm and 32 mm dia. G.I. pipes |
| 91 | ii. 40 mm and 50 mm dia. G.I. pipes |
| 92 | iii. 65 mm and 80 mm dia. G.I. pipes. |
| 93 | 100 mm and 150 mm dia. G.I. pipes |
| 94 | Supply of G.I. pipes (all classes) complete excluding fittings and Earth work. (Quantity is subjected to actual requirement at site).i. 20 mm dia. G.I. pipes |
| 95 | i. 25 mm dia. G.I. pipes |
| 96 | ii. 40 mm dia. G.I. pipes. |
| 97 | iii. 50 mm dia. G.I. pipes |
| 98 | iv. 65 mm dia. G.I. pipes |
| 99 | v. 80 mm dia. G.I. pipes |
| 100 | 100 mm dia. G.I. pipes |
| 101 | Providing of GI Pipe fittings of ISI / reputed MAKE to.(Quantity is subjected to actual requirement at site).i. ELBOWa. 100mm dia |
| 102 | a. 80mm dia |
| 103 | b. 65mm dia |
| 104 | c. 50mm dia |
| 105 | d. 40mm dia |
| 106 | e. 25mm dia |
| 107 | f. 20mm dia |
| 108 | ii. UNION of ISI marka. 100mm dia |
| 109 | a. 80mm dia |
| 110 | b. 65mm dia |
| 111 | c. 50mm dia |
| 112 | d. 40mm dia |
| 113 | e. 25mm dia |
| 114 | f. 20mm dia |
| 115 | iii. Socket of ISI marka. 100mm dia |
| 116 | a. 80mm dia |
| 117 | b. 65mm dia |
| 118 | c. 50mm dia |
| 119 | d. 40mm dia |
| 120 | e. 25mm dia |
| 121 | f. 20mm dia |
| 122 | iv. Equal Tee of ISI marka. 100mm dia |
| 123 | a. 80mm dia |
| 124 | b. 65mm dia |
| 125 | c. 50mm dia |
| 126 | d. 40mm dia |
| 127 | e. 25mm dia |
| 128 | f. 20mm dia |
| 129 | Reducer Socket of ISI marka. 100 to any smaller size GI |
| 130 | a. 80 to any smaller size GI |
| 131 | b. 65 to any smaller size GI |
| 132 | c. 50 to any smaller size GI |
| 133 | d. 40 to any smaller size GI |
| 134 | e. 25 to any smaller size GI |
| 135 | f. 20 to any smaller size GI |
| 136 | vi. Plug of ISI marka. 100mm dia |
| 137 | a. 80mm dia |
| 138 | b. 65mm dia |
| 139 | c. 50mm dia |
| 140 | d. 40mm dia |
| 141 | e. 25mm dia |
| 142 | f. 20mm dia |
| 143 | vii. Nipple of ISI mark (per inch)a. 100mm dia |
| 144 | a. 80mm dia |
| 145 | b. 65mm dia |
| 146 | c. 50mm dia |
| 147 | d. 40mm dia |
| 148 | e. 25mm dia |
| 149 | 20mm dia |
| 150 | Providing of gun metal gate valve of approved quality.(Quantity is subjected to actual requirement at site).i. Screwed Enda. 100mm dia. |
| 151 | a. 80mm dia |
| 152 | b. 65mm dia |
| 153 | c. 50mm dia |
| 154 | d. 40mm dia |
| 155 | e. 25mm dia |
| 156 | 20mm dia |
| 157 | Replacement of old damaged C.I/D.I. Sluice valve by providing / fixing of new Sluice valve of Reputed make like Vag/Talis/Kirloskar/Zoloto/AVK etc. as per approval of Engineer Incharge etc including cost of nuts, bolts, rubber insulations all carriages and taxes upto site of work, complete (Quantity is subjected to actual requirement at site).i. 100mm dia |
| 158 | i. 150mm dia |
| 159 | ii. 200mm dia |
| 160 | iii. 300mm dia |
| 161 | iv. 350mm dia |
| 162 | v. 400mm dia. |
| 163 | Making connections of GI distribution branch with G.I. of following size including providing and fixing of pipe specials required for the job including cutting and threading the pipe complete.(Quantity is subjected to actual requirement at site).a. 25-40mm dia nominal bore. |
| 164 | b. 50-80mm dia nominal bore. |
| 165 | Supply of pig lead including all carriages upto site of work. |
| 166 | Supply of Spun Yarn. |
| 167 | Supply of Fire Wood.. |
| 168 | Supply of Kerosene. Oil. |
| 169 | Providing refreshment to supervisory staff & departmental labour for prolonged/continuous operation of repair/ restoration/ maintenance work of pipelines. Complete job including packing with following items. (Quantity is subjected to actual requirement at site).i. Water Bottle 250ml. |
| 170 | i. Juice tetra pack/ tin 200 ml of standard quality. |
| 171 | ii. Boiled Egg/Omelete. |
| 172 | iii. Biscuit standard quality of 100 g pack. |
| 173 | iv. Banana. |
| 174 | v. Bread toast without butter |
| 175 | vi. Lipton tea cup with sugar |
| 176 | vii. Namkeen tea cup. |
| 177 | ix. Normal Chicken Biryani one box for one person |
| 178 | Providing and fixing of superior type tent including interior furnishing, carpet etc. on rent basis including loading, unloading and all carriages up to site and back. (complete job) |
| 179 | Providing of PVC outdoor chairs on rent basis including loading, unloading and all carriages up to site and back. (complete job) |
| 180 | Providing of superior type sofas sets on rent basis including loading, unloading and all carriages up to site and back. (complete job) |
| 181 | Providing and fixing of 50 litre geyser of standard make to be approved by Engineer Incharge including installation. |
| 182 | Providing and fixing of 15 litre flushing cistern of standard make to be approved by Engineer Incharge including installation. |
| 183 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty : Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm) |
| 184 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. i. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 185 | Providing fixing & commissioning of LED Flood Lights of 50 Watts with stand including all accessories required at site complete job inclusive all carriages. |
| 186 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 187 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 188 | White washing with lime to give an even shade : i. Old work (two or more coats) |
| 189 | Old work (one or more coats) |
| 190 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work (one or more coats) |
| 191 | Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. |
| 192 | Finishing walls with water proofing cement paint of required shade: i. Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat. |
| 193 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. |
| 194 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 195 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete i. On steel work |
| 196 | ii. On concrete work |
| 197 | Painting with oil type wood preservative of approved brand and manufacture on old work (one or more coats) |
| 198 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead |
| 199 | Cement Plaster (In Fine Sand) 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 200 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick |
| 201 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.: |
| 202 | Providing and Fixing of Lighting/Fan/Exhaust Fan Point wiring with 1.0 Sqmm PVC insulated Copper wire of (Havells/Polycab or Equalent) through PVC conduit pipe including providing and fixing of 6 Amp Switch/6 Amp 5 pin Socket and 10 watt LED light of reputed make recessed in wall with necessary covers of modular type duly tested and commissioned, complete job |
| 203 | Providing and fixing of size 200mm exhaust fan with motorised shutter ISI marked of reputed make like Havells, usha etc. duly tested and commissioned. |
| 204 | Providing, Fixing and Rectification of damaged PVC soil pipe by way of p/f of necessary pipe or fittings etc. While excavation of pipe laying or restoration of leakages incl. all sorts of carriage etc.(Complete Job).i) 80 mm dia. PVC . |
| 205 | ii) 100 mm dia. PVC. |
| 206 | Supply/providing and placement of standard office chairs (non-revolving type) of reputed make as approved by Engineer-in-Charge incld. all carriages upto site of work. |
| 207 | Providing/supplying of BIS/ISI certified A4 size (21cm x29.7 cm) 75 GSM paper of reputed make for office use inclusive of all taxes and carriage. |
| 208 | Providing/supplying of BIS/ISI certified A4 size (21cm x29.7 cm) 180 GSM Glossy Photo paper of reputed make for office use inclusive of all taxes and carriage. |
| 209 | Supply/providing of TK-1179 toner kit/ cartridge for Kyocera Ecosys M2040dn Multi function Monochrome Laser office printer inclusive of all taxes and carriage. |
| 210 | Servicing/repairing of Kyocera Ecosys M2040dn Multi function Monochrome Laser office printer inclusive of all taxes and carriage. |
| 211 | Supply/providing of Canon GI-790 4 Bottle Ink Kit (BK, C, M & Y) Compatible with Canon Coloured Inkjet office printer inclusive of all taxes and carriage. |
| 212 | Servicing/repairing of Canon G-Series Multifunction Coloured Inkjet office printer inclusive of all taxes and carriage. |
| 213 | Providing and supplying file covers (hard board) with tag for office use inclusive of all taxes and carriage. |
| 214 | Providing and supplying plastic file folders for office use inclusive of all taxes and carriage. |
| 215 | Providing and supplying ball/gel pens of standard make (blue/red ink) for office use inclusive of all taxes and carriage. |
| 216 | Providing and supplying registers (100 pages) for office use. inclusive of all taxes and carriage. |
| 217 | Providing/supplying/fixing of tall tubular inverter battery 150AH tall of standard make (Exide/Luminous/Amaron or equivalent) including fixing with required cables/connectors etc. including transportation, installation, testing and commissioning complete. |
| 218 | Providing/supplying/fixing of 10 KVA (90V-270V) single phase heavy duty Step up/down oil cooled transformer/stablizer with copper wiring as approved by Engineer In-Charge |
| 219 | Providing of following mandatory items: i) Rechargeable led torch 4 watt of Andslite ranger make including all taxes. |
| 220 | ii) Shovels of ISI marked Tata make or equivalent. |
| 221 | iii) Pick axe of standard make. |
| 222 | iv) Spade of Standard make. |
| 223 | v) Rake (panja) of standard make. |
| 224 | vi) Long Light Weight Gum Boots of standard make |
| 225 | vii) Waterproof Rain coats with hood of standard quality |
| 226 | vii) Heavy duty wrenches of different sizes, ISI marked Taparia make conforming to IS 4003 PART II-1986.a.12 inches. |
| 227 | 18 inches. |
| 228 | 24 inches. |
| 229 | 36 inches Please Enable Macros to View BoQ information |
