|
| 1 | Taking down cement or cement lime plaster of any description on brick work or stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete and removing debris all as specified and as directed. |
| 2 | M&L for brickwork with fly ash bricks (old size), straight or curved on plan, exc 6 m mean radius, built in cement mortar 1:6 with and including demolition of existing brick work built in cement or cement lime mortar of any description complete all as specified and as directed |
| 3 | M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces (on external walls), finished even & fair complete all as specified and as directed. |
| 4 | M&L for rendering 10 mm thick in cement mortar 1:6 on other than fair faces of brick/concrete surfaces, finish even & smooth without using extra cement all as specified and as directed. |
| 5 | M&L for rendering 5 mm thick in cement mortar 1:3 on fair faces of concrete surfaces on ceiling, finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 6 | M&L for preparation of new plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed. |
| 7 | M&L for preparation of new plastered wall surfaces and applying three coats of white wash complete all as specified and as directed. |
| 8 | M&L for preparation of new plastered wall surfaces and applying two coat of acrylic distemper over a coat of chalk whiting complete all as specified and as directed. |
| 9 | Material & Labour for preparation of surfaces and applying Two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 10 | M&L for complete removal of existing treatment from old decorated walls including brooming down or by steel wire brushes, scrapping down smoke spot mould & efflorescent salt & greasy spots etc. and applying three coats of white wash complete all as specified and as directed. |
| 11 | M&L for complete removal of existing treatment from old decorated walls including brooming down or by steel wire brushes, scrapping down smoke spot mould & efflorescent salt & greasy spots etc. and applying two coats of acrylic distemper over a coat of primer complete all as specified and as directed. |
| 12 | M&L for preparation of old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and as directed. |
| 13 | M&L for preparation of old decorated surfaces of walls and applying one coat of acrylic distemper complete all as specified and as directed. |
| 14 | M&L for preparation of old decorated surfaces including washing down and scraping from ceiling surfaces and applying two coats of white wash complete all as specified and as directed. |
| 15 | M&L for preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed. |
| 16 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed. |
| 17 | M&L for preparation of plastered wall surfaces and applying minimum 2mm thick wall care putty in two layers including sanding of the putty surface after drying to achieve even and smooth finish for receiving painting complete all as specified and as directed. |
| 18 | Demoltion of cement concrete (unreinforced) in ground floors and paving n. exc 15cm thickness (below or above ground level) complete all as specified and as directed. |
| 19 | M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregates) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed. |
| 20 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed. |
| 21 | M&L for glazed coloured ceramic tiles of size 300 mm x 200 mm x 6 to 7mm / 450 mm x 300 mm x 6 to 7mm thick on vertical surfaces such as dado/skirting, laid over and including 10mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles complete all as specified and as directed. |
| 22 | M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectangular), area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc, laid over and including 15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles complete all as specified and as directed. |
| 23 | M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors etc, laid over and including 15mm thick screed bed in cement mortar 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles complete all as specified and as directed. |
| 24 | All as per serial item No.23 here in before but as in skirting laid over and including 10mm thick rendering in cement mortar 1:3 complete all as specified and as directed. |
| 25 | M&L for non skid coloured ceramic coloured tiles, 7-8mm thick (square or rectangular), area of each tile exc 0.18 sqm but not exc 0.38 sqm (600 mm x 600 mm) as in floors etc, laid over and including 15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles complete all as specified and as directed. |
| 26 | All as per serial item No. 25 here in before but as in skirting laid over and including 10 mm thick backing coat in cemrnt mortar 1:3 complete all as specified and as directed. |
| 27 | M&L for 9-10mm thick virified tiles, double charged, light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. laid over and including 15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles complete all as specified and as directed. |
| 28 | All as per serial item No 27 here in before but as in skirting laid over and including 10mm thick backing coat in cement mortar 1:3 complete all as specified and as directed. |
| 29 | Dismantling of stone slabs and stone tiles or interlocking tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortor complete all as specified and as directed. |
| 30 | M&L for machine cut cudappah stone slab 20-25mm thick as in cooking platform etc including cutting chases in brick wall and fixing the slab in cement mortar including rubbing and polishing complete all as specified and as directed. |
| 31 | M&L for 18 - 22 mm thick machine cut kota stone flooring, (size of kota stone slab 22\\" x 22\\") laid over and including 20 mm thick bedding layer of cement mortar 1:6, jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed. |
| 32 | All as per serial item No. 31 here-in-before but 18 to 20 mm thick kota stone on vertical surfaces such as in riser/ skiting / dado of size as required at site over and including10 mm thick backing coat of cement mortar (1:3) complete all as specified and as directed. Note : Single piece kota stone to be used in riser of staircase |
| 33 | M&L 18-20 mm thick pre-polished granite stone slab of approved shade as in table top, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, including full round moulding the edges, laid over and including screed bed 15mm thick in cement mortar 1:4, jointing, pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polishing to achieve mirror finish complete all as specified and as directed.Note: colour and shade as Approved by GE. |
| 34 | M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregates) as in sub-base, complete all as specified and as directed. |
| 35 | M&L for precast cement concrete interlocking tiles 60mm thick factory made, hydraulically pressed cemented tiles of grey cement with pigments, chamfered edge, with glossy finish of M-35 grade conforming to IS-15658-2006 and of approved colour, design, pattern, size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directedNote : Size, shape & pattern of tiles shall be as approved by GE. |
| 36 | Taking down chowkats or frames with shutters (without taking off shutters from the frames, area not exc 1.5 sqm each complete all as specified and as directed. |
| 37 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames, area exc 1.5 sqm but not exc 4 sqm each complete all as specified and as directed. |
| 38 | Taking down shutter of any description, area exc 1 Sqm & not exc 2 Sqm each and refixing in the same opening after easing and adjusting etc complete all as specified and as directed. |
| 39 | Taking down shutter of any description, area not exc 1 Sqm each complete all as specified and as directed. |
| 40 | Taking down shutter of any description, area exc 1 Sqm but not exc 2 sqm each complete all as specified and as directed. |
| 41 | S&F mild steel window/ventilator with pressed steel frame made out of 1.25 mm thick steel sheet having two rebate with side hung double shutters one glazed shutter and other fly proofing shutter including projecting type hinges with steel handle, and steel peg stay with and without glazing bars dovetailed or welded complete all as specified and as directed. |
| 42 | S&F mild steel framed work such as grills, gratings, framed guard bars etc confirming to Fe 410-W Gde-E-250 quality-A with ends of bars shouldered and/or rivettd or forged into spikes and similar works including one shop coat of red oxide primer and fixed complete all as specified and as directed. |
| 43 | S&F framed work such as in doors or gates of angle (Fe 410-W Gde-E-250 quality-A) or tie bars, hold fasts other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including one shop coat of zinc chromate primer paint complete all as specified and as directed. |
| 44 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per specifications & drawing complete all as specified and as directed by Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 45 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: Stainless steel butt hinges shall be paid separately under respective item. |
| 46 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grains printed PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawing all as specified and as directed. |
| 47 | S&F factory made solid panel PVC door shutter, 30mm thick (stiles), consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded feathered edges wood grain printed PVC sheet used instead of plain colour PVC sheet & 5 mm thick x15 mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10 mmx 10 (90 degree) used instead of exposed portion of PVC sheet beading suppling and fixing in the frame at site as per specification & drawing all as specified and as directed. |
| 48 | S&F in repairs, 18 mm thick WPC Board (Wood Polymer Composite), termite proof, waterproof & screwable & nailable as in fabrication of storage System, cupboards in rooms/kitchen i/c Drawers, shelves, etc. laminated one side with decorative choice lamination and other side balancing white lamination, with teak wood lipping on the edges of the shutters and the box etc. including necessary fixing arrangement on walls with fasteners, complete all as specified and as directed by Engineer-in-charge. |
| 49 | S&F 35 mm thick, second class hard wood, plain framed, factory made, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and as directed. |
| 50 | S&F 35 mm thick second class hard wood, glazed and skelton shutters, factory made, open rebated and prepared to receive glass, gauge, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bar any numbers, edges of framing plain, chamfered or rounded,fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specifed in SSR Part 1, section 8, clause 8.24(a); supplied and fitted to chowkhats all as specified and as directed. |
| 51 | M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint of any shade over a coat of red oxide primer complete all as specified and as directed. |
| 52 | M&L for preparation of new wooden surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint of any shade over a coat of pink primer complete all as specified and as directed. |
| 53 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed |
| 54 | S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed. |
| 55 | Hacking out old broken glass (any thickness, size quality or description and from any height) from wooden / metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed. |
| 56 | S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty or beads in square n.exc 0.50 sqm in each pane of any description complete all as specified and as directed. |
| 57 | S&F 3mm thick frosted/figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel windows including glazing pins etc. complete all as specified and as directed. |
| 58 | M&L for welding in repairs, n exc 2.50cm in length, thickness of metal to be welded n exc 6mm thick complete all as specified and as directed |
| 59 | S&F in repairs 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed with screws complete all as specified and as directed. |
| 60 | S&F in repairs 100 mm long stainless steel butt hinges, medium weight and fixed with screws complete all as specified and as directed. |
| 61 | S&F in repairs aluminum anodized barrel tower bolt of extruded section size of bolt 150mm as specified and as directed. |
| 62 | S&F in repairs aluminum handle, cast type, anodized, 125mm size complete all as specified and as directed. |
| 63 | S&F in repairs 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed |
| 64 | S&F in repairs, 40 mm dia cupboard knobs fixed with nails, screw and washer of mild steel brass polished, bright finished complete all as specified and as directed |
| 65 | S&F in repairs, door stopper of aluminiam alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150 mm all as specified and as directed. |
| 66 | Taking up or down 15 mm bore GI steel tubing and connections complete all as specified and as directed. |
| 67 | Taking up or down 20 mm bore GI steel tubing and connections complete all as specified and as directed. |
| 68 | M&L for 15mm bore CPVC pipes SDR 11 & brass CPVC SDR 11 fittings such as socket, elbow, bends, tee, reucer, union, caps plug, nipple etc complete laid in walls/ceilings or laying in floor trench or fixed to walls complete all as specified and as directed. |
| 69 | M&L for 15mm bore UPVC pipes Sch 40 including fittings such as socket, elbow, bends, tee, reucer, union, caps plug, nipple etc complete laid in walls/ceilings or laying in floor trench or fixed to walls complete all as specified and as directed |
| 70 | M&L for 20mm bore UPVC pipes Sch 40 including fittings such as socket, elbow, bends, tee, reucer, union, caps plug, nipple etc complete laid in walls/ceilings or laying in floor trench or fixed to walls complete all as specified and as directed |
| 71 | M&L for cutting chases for pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good in CM 1:3, cutting not exc 10 cm girth all as specified and as directed. |
| 72 | S&F in repair 15mm bore dia concealed stop cock with adjustable wall flange high pressure screwed for iron pipe complete all as specified and directed.Make : Cat No. F1015361 of CERA or equivalent model of makes specified. |
| 73 | S & F in repairs, stop/ angle valves, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.Make: Cat No. F1015201 of CERA or equivalent model of makes specified. |
| 74 | S&F in repairs, brass chromium plated towel ring with bracket fixed wirh brass chromium plated screws complete all as specified and as directed.Make : Cat No. F5015105CH of CERA or equivalent model of makes specified. |
| 75 | S&F in repairs SS towel rack with hook, 600mm long complete all as specified and as directed.Make: Cat No. F5015131CH of CERA or equivalent model of makes specified. |
| 76 | S&F in repairs wall mixer for mixing hot and cold water and bend for connecting to shower,15 mm bore screwed for iron pipe and fixed complete all as specified and as directed.Make : Cat No. F1015401 of CERA or equivalent model of makes specified. |
| 77 | S&F in repairs Central hole Wash Basin Mixer for mixing hot and cold water 15 mm bore screwed for iron pipe and fixed complete all as specified and as directed.Make: Cat No. F2014461 or F1015454 of CERA or equivalent model of makes specified. |
| 78 | S&F in repairs 2 Way Bib Cock with Wall Flange and aerator complete all as specified and as directed.Make : Cat No. F1015161 of CERA or equivalent model of makes specified. |
| 79 | S&F in repair brass spindle for 15mm bore bib taps, pillar taps, stop cock, etc fixed complete all as spd and directed. |
| 80 | S&F in repairs, chromium plated Jet with flexible tube upto 1 metre long with stainless steel triangular plate fixed to european type water closet complete all as specified and as directed. |
| 81 | S&F in repairs,Health faucet (ABS Body) suitable for 15 mm dia pipe with 1 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.Make : Cat No. F8030111AB of CERA or equivalent model of makes specified. |
| 82 | S&F in repair Soap dish, chromium plated, fixed to plugs with chromium plated screws complete all as specified & directed. |
| 83 | S&F SS Grating with square frame (Grating thk- 1mm & frame thk- 1.5mm) of size 125mm (minimum) with/with out waste hole complete all as specified and directed. Note: Design of grating to be approved by Engineer-in-Charge. |
| 84 | S&F in repairs, PVC connection, 15 mm size with PTMT nuts, 600 mm long, complete all as specified and as directed. |
| 85 | S&F in repair overhead shower rose 125mm size with 200mm long shower arm and wall flange complete all as specified & directed by Engr-in-charge.Make: Cat No. F7020111AB of CERA or equivalent model of makes specified. |
| 86 | S&F in repairs, bib tap 15mm dia, with wall flange and aerator screwed down for iron pipe or for brass ferrule complete all as specified and as directed.Make : Cat No. F1015151 of CERA or equivalent model of makes specified. |
| 87 | S&F in repairs vitreous china counter sunk wash hand basin, oval shape (approx. 520mm x450mmx 200mm size) including 32 mm dia waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia PVC connection pipe complete all as specified and as directed. Make: Cat No. S2030101 of CERA or equivalent model of makes specified. |
| 88 | S&F in repair Vitreous China, Squatting pan Orissa pattern size 580 x 440mm, white with integral foot rests (excluding flushing cistern and flush pipe) with Vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe, including PCC (1:2:4) type B-1 for fixing of WC and making good the floor to match the existing complete all as specified and as directed. |
| 89 | S&F in repairs, vitreous china wash down water closet (pedestal pattern) white, including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws, etc. complete all as specified and as directed.Make: Cat No. S1053102 of CERA or equivalent model of makes specified. |
| 90 | S&F in repairs vitreous china EWC wash down water closet one piece with cistern set (snow white) with soft closing glossy seat cover, including all connections and fixing arrangement complete all as specified and as directed. Make: Cat No. S1013218 of CERA or equivalent model of makes specified. |
| 91 | S&F in repairs, stainless steel sink with drain board made of 1mm thick sheet for kitchen with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 350mm x 185 mm including CP waste coupling complete all as specified and as directed.Make: Cat No. SBSD 05 (RR) of JAYNA or Elegance Small of Nirali or equivalent model of makes specified. |
| 92 | S&F in repairs, 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve and handle including brackets complete all as specified and as directed. Make :- Cat No. B1010110 of CERA or equivalent model of makes specified. |
| 93 | S&F in repairs, kitchen plate rack of overall size 786mm x914mm x 254mm made out stainless steel sheet not less than 0.63mm thick, design and pattern as approved by GE and fixed to wall with wooden plugs with chromium plated screws and cup washers complete all as specified and as directed. Make: Prayag cat No P-348 or Cat No. SSKPR 315 of Silvershine or equivalent model of makes specified. |
| 94 | S&F in repairs 600 mm x 450 mm, bevelled edge mirror of selected quality glass, 5 mm thick, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 95 | S&F in repairs, mirror cabinet PTMT of size 500mm x 400mm (or nearest size) with magnetic locking arrangements, fixed with and including chromium plated brass screws and PVC rawl plugs complete all as specified and as directed. Make : Cat No. 554 of Prayag or of equivalent model in other makes as approved by GE Please Enable Macros to View BoQ information |
| 96 | S&F in repairs, mirror cabinet PTMT of size 500mm x 400mm (or nearest size) with magnetic locking arrangements, fixed with and including chromium plated brass screws and PVC rawl plugs complete all as specified and as directed. Make : Cat No. 554 of Prayag or of equivalent model in other makes as approved by GE Please Enable Macros to View BoQ information |
