|
| 1 | Demolition of brick/stone work built in cement mortar including all quoins, arches, pillar including coping etc., complete all as specified and directed. |
| 2 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 3 | Brick work with old size fly ash bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed. |
| 4 | Rendering 5mm thick in cement mortar 1:3 on fair faces of RCC surfaces including applying cement slurry in soffit of slab or ceiling, chajjas, facias etc complete all as specified and directed. |
| 5 | Taking down cement plaster on brick walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 6 | Rendering 15 mm thick on other than fair faces of brick/stone or concrete surfaces in Cement mortar 1:6 and finished surface even and smooth without using extra cement (Internal surfaces) complete all as specified and directed by Engineer in Charge. |
| 7 | Rendering 15 mm thick on fair faces of brick/stone or concrete surfaces in Cement mortar 1:4 and finished surface even and smooth without using extra cement (Internal surfaces) complete all as specified and directed by Engineer in Charge. |
| 8 | Material & Labour for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over 2 mm wall putty to achieve smooth surface complete all as specified and directed. |
| 9 | Two or more coats of 100% Premium acrylic emulsion paint with mechanical roller having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed. |
| 10 | Two or more coats of 100% Premium acrylic emulsion paint with mechanical roller having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over old plastered or unplastered surfaces of wall including complete removal of existing finishes complete all as directed. |
| 11 | Material & Labour for preparation of old plastered wall surface of walls and applying two coats of oil bound distemper over 2 mm wall putty to achieve smooth surface over chalk whitening preparatory to distempering complete all as specified and directed. |
| 12 | Preparetion of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified. |
| 13 | Demolition of cement concrete (un-reinforced) in ground floor and pavings n. exc 15cm thickness (below or above ground level) all as specified and directed. |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 15 | Plain cement concrete M-15, nominal mix, type B-0, using 12.5mm graded mechanically crushed stone aggregate as in flooring, 25mm thick, surface finished even and rough to receive top finish, complete all as specified and directed. |
| 16 | Vitrified ceramic tiles light shade, 10mm thick (Square/ rectangular) area of each tile not exc. 0.36 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed. |
| 17 | Vitrified ceramic tiles light shade, 10mm thick (Square/ rectangular) area of each tile not exc. 0.36 Sqm, in vertical surfaces such as skirting and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed. |
| 18 | Mat finish jointless (non skid), Premium class I grade, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed. |
| 19 | Granite 20mm thick (table rubbed and polished) in steps, jambs, pollars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 15mm thick screed bed in cement mortar (1:6), including necessary cutting and waste as per site requirement pointed in white or coloured cement to match, complete all as specified and directed by Engr-In-Charge. |
| 20 | Material & Labour for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and duly machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry including cutting, polishing and 15 mm thick screed bed layer of cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 21 | Glazed coloured tiles of size 350x250/450x300x7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with coloured cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed. |
| 22 | Taking up or down 15mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed. |
| 23 | Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal from site, complete all as specified and directed. |
| 24 | Mild steel galvanized iron water tubing 15mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall or ceiling or laid in floor, cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed. |
| 25 | Mild steel galvanized iron water tubing 20mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. fixed to wall or ceiling or laid in floor, cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed. |
| 26 | Supply & fixing in repair Bib tap, fancy type 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, chromium plated screwed for iron pipe or for brass ferrule and fixed in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 27 | Supply & fixing in repair 15mm bore dia of stop valves/AngleValve (one way/two way), fancy type, chromium plated with long shank and cup (concealed type) screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge. |
| 28 | PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, fixed in repair complete all as specified and directed. |
| 29 | S&F in repair Soap dish, SS, approximate size 160x 160x90mm, any type, fixed to plugs with chromium plated brass screws all as specified and directed by Engineer-in-Charge. |
| 30 | Supply & fixing Sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed by Engineer-in-Charge. |
| 31 | S&F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge |
| 32 | Chromium plated 15mm bore Single Lever Wash Basin Mixer with Popup Waste System, 450mm Long Braided Hoses & Base Flanger, screwed for iron pipe complete, all as specified. |
| 33 | Chromium Plated, toilet Paper Holder of stailess stell with rod and Flap, fixed in poistion with chromium plated (CP) brass screws, fixed in repair, complete all as specified and directed. |
| 34 | Supply & fixing in repairs 600mmx450mm bevelled edge looking mirror of selected quality with 6mm thick polished glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers, complete all as specified and directed. |
| 35 | S& F in repair one piece floor mounted toilet water closet of size (WxPxH) 360 x 675 x 750 mm white or tinted S trap 300 mm trendy square design slim UF ezee close seat cover wash down system dual flush (6/32 ltrs) mechaniism with necesary fixing bolts /screws etc compklete all as specified Make Jaquar Cat No OPS-WHT 15853S300UF or equivalent in Somany, Cera |
| 36 | Wash basins, Vitreous China counter sunk top (oval shape) size 610x 385x 130mm, coloured, fixed in granite counter by making suitable holes, new brackets with and including cutting for and pinning on ends of brackets, 450mm long PVC connections 15mm size with PTMT coupling nuts at bothends, trap, grating and union for discharge pipe, waste, chain and plug and porcelain stopper, waste pipe of polythylene of low or high density or PVC of 32mm dia including 32mm dia waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, screwed for iron pipe and fixed, complete all as specified and directed. |
| 37 | S& F in repair for PVC (SWR) 110mm bore (dia) soil, waste and ventilating pipe, singe socketed, in any length with Rubber Ring Joints fixed to walls, including taking down unserviceable pipe, fittings, etc, complete all as directed and all as specified. |
| 38 | S&F in repair for PVC (SWR) 75mm bore (dia) soil, waste and ventilating pipe, singe socketed, in any length with Rubber Ring Joints fixed to walls, including taking down unserviceable pipe, fittings, etc, complete all as directed and all as specified. |
| 39 | S&F in repair for PVC (SWR) 110mm bore (dia) Bends any type with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed. |
| 40 | S F in repair for PVC (SWR) 75mm bore (dia) Bends any type and Jointing with Solvent Cement, complete all as specified and as directed. |
| 41 | S F In repair for PVC (SWR) 110mm bore (dia), Single T Junction equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed. |
| 42 | S F in repair PVC (SWR) 75mm bore (dia), Single T Junction equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed. |
| 43 | Supply & fixing rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layered hoisted and fixed in position of 500 liters capacity confirming to IS specification including taking down existing water tank complete all as specified and directed by Engineer-in-Charge. |
| 44 | S&F 25 mm dia ball valves, high pressure of epoxy coated aluminium rod and high density plastic ball complete screwed for iron pipes or brass ferrule and fixed complete all as specified and directed. |
| 45 | S&F 25 mm Gun metal globe valve with iron wheel screwd both ends for iron pipe and fixed all as specified and directed. |
| 46 | Supply & fixing in repairs stainless steel sink with drainage board made of 1mm thick for kitchen with plugs, washer, waste pipes, cast iron cantilever brackets, connecting union to pipe of overall size 915mm x 460mm, bowl size 410 x330 x 160mm with glossy finish,waste coupling 32 mm bore of discharge pipe including bedding in cement mortar to dwarf wall fixing cantilever brackets and connecting unions to pipe complete all as specified and directed by Engineer-in-Charge |
| 47 | S&F in repairs stainless steel plate rack 900mmx900mmx250mm wide made out of 1.00mm thick sheet and fixing over and including 40cm long MS angle of size 25mmx25mmx3mm - 02 Nos complete all as specified and directed by Engineer-in-Charge |
| 48 | Taking down Chowkats or Frame (without taking off shutter from the frame) exc. 1.50 sqm but n exc 4.00 Sqm each complete all as specified and as directed. |
| 49 | Taking down Chowkats or Frame (without taking off shutter from the frame) n exc. 1.50 sqm complete all as specified and as directed. |
| 50 | S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 150mm complete all as specified and directed by Engineer-in-Charge. |
| 51 | M & L for slate tiles locally available best quality fixed on wall with neat cement slurry/paste including rendering 15mm thick cement mortar 1:4 on stone masonary/brick masonary, size and pattern to be laid as ordered by Engineer in Charge. |
| 52 | S&F in repair 25 mm dia mild steel powder coated, fancy type curtain rod complete all as specified |
| 53 | S&F in repair curtain brackets fancy type brackets with rounded fancy type end knob, with antique finish or coloured suitable for holding 25 mm dia single curtain rod complete all as specified. |
| 54 | S&F in 12 mm thick toughened glass partition (with or withour opening/ door shutters with diamond polished edge, clear glass including all hardware fittings detailed as under, fixed in position as per manufacturer instructio including following fittings complete. (a) Stainless steel top patch (cat No. EPF - 701) 01 set (b) Stainless steel top pivot (cat No EPF-712) 01 set (c) Stainless steeel bottom patch (Cat No EPF-702) 01 set (d) Glass to wall stainless steel lock (Cat No FH-ECO -842) 01 set (f) Stainless Steel Handle 300mm size (Cat No ESBH-011) 02 Nos for each shutter. Note :- Cat No. mentioned above for hardware fittings are of make ENOX, contractor may use similir type hardware fitting of make DORMA/OZONE. make of glass ATUL/MODI/GURD/SAINT GOBAIN/ JINDAL/ INDAL/ HINDAL/ WALCO. |
| 55 | Powder coated colour 15 micron anodized aluminium door chowkhat with shutter of approved design complete with all fixing arrangements including providing and fixing door handles, tower bolts, hydraullic door closer and mortice lock, hinges, door stopper including neoprene lining. The member shall made out of extruded aluminium sections comprising of:- a) Shutter vertical member 85.00 x 44.45 x 1.80mm weighing 1.302 Kg/RM. b) Shutter top member 83.5 x 44.45 x 1.70 mm weighing 1.243 Kg/RM. c) Shutter bottom member 114.30 x 44.45 x 1.29mm weighing 1.139 Kg/RM. d) Shutter lock rail 83.5x44.45x1.70mm weighing 1.243 Kg/RM.e) Anodised aluminium handle, fancy type, 350mm long and aluminium tower bolt of size 150mm. (f) 5.50mm thick tinted sheet glass fixed with alumnium beading, silicon lining and gaskets. (g) Aluminium anodised frame of door of section 101.6 x 44.45 x 1.75mm weighing 1.367 Kg/M, with flat iron hold fasts and necessary concrete to fix hold fasts all as directed. Note:- (i) Shutter shall be fixed with heavy floor spring ISI marked and pivot, brass lock with duplicate keys. |
| 56 | Powder Coated colour 15 micron anodized aluminium sliding window three track with chowkhat and aluminium grill of approved design complete all as directed with all fixing arrangements (including providing and fixing window handles, tower bolts and provision for fixing lock) including neoprene lining. The member shall made out of extruded aluminium sections comprising of:- (a)Shutter vertical member 47.62 x 45.45 x 1.74mm weighing 0.881 Kg/RM.(b)Shutter top member 47.62 x 44.45 x 1.14mm weighing 0.607 Kg/RM.(c)Shutter bottom member 47.62 x 44.45 x 1.14mm weighing 0.607 Kg/RM.(d) Natural colour 15 micron anodized aluminium anodised frame of chowkhat of section 85.00 x 44.45 x 1.80 mm weighing 1.302 Kg/ RM, with flat iron hold fasts and necessary concrete to fix hold fasts all as directed.(e)including 5.50mm thick tinted glass fixed with alumnium beading, silicon lining and gaskets and stainless steel wire cloth complete . (f) The size of anodised aluminium round handle, fancy type shall be 100mm dia (02 Nos) and anodised aluminium tower bolt of size 100mm (02 Nos). |
| 57 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame and fillets complete as per specifications and drawing. |
| 58 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on/to wall to make PVC Frame as per specification. |
| 59 | Plain cement concrete M-15, nominal mix, type B-2, using 40mm graded mechanically crushed stone aggregate, 50mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5cm deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), complete all as specified and directed. |
| 60 | Plain cement concrete M-15, nominal mix, B-1 using 20mm graded mechanically crushed stone aggregate as in lintels upto 1.50 metre clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, benching, copings, kneelers, apex stones, bed plates, chamfered angles and throating, complete all as specified and directed.Note :- (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately. |
| 61 | Plain cement concrete 1:3:6, type C-1 using 20mm graded mechanically crushed stone aggregate as in surface channel and drains, complete all as specified and directed. |
| 62 | Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed ballusters walk ways; railings; flat iron for framing grills, framework of water tanks and similar work conforming to Fe.290. Gde-E-165, all as specified. |
| 63 | S&F in repair Vitreous China wash down water closet pan with 'P' trap (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, etc.complete all as specified and directed |
| 64 | S&F in repair 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern including inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe, PVC connection 15 mm size with PTMT nuts of length 450 mm and with CP brass coupling & PVC washer at both ends, complete all as specified. |
| 65 | S&F in repairs tubular towel rail brass chromium plated, 20mm dia, D type 60 cm long between flanges complete all as specified and directed. Make :- Jaguar/ Parko /GEM |
| 66 | Rolled sections as in Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240s, steel work, complete all as specified and directed. |
| 67 | Taking down cement plaster/decayed concrete from RCC roof projections/upward parapet walls/ down ward facia/soffits and fins of RCC chajjas /beams/columns/balconies etc. Supply and fixing by means of nailing wire netting of galvanised wire 1.40 mm dia and mesh size 20 mm and brushing neat cement slurry with 3.00 kg of cement/sqm and M & L for 20 mm thick cement rendering in two layers of 10 mm each (top/final layer shall be rendered after final setting of under layer) in Cm 1:3 on concrete surfaces including scaffolding at a height upto 7.00 mtrs. etc complete all as specified and directed. |
| 68 | Material and Labour for waterproofing of exterior walls, include complete removal of existing plaster including raking out joints and applying two coats of acrylic polymer modified high performance coating (Smartcare Ultra Block 2k). The treatment shall be done from ground level and providing 15mm thick cement plaster in CM 1:4 finished even and smooth. |
| 69 | Taking down existing water proofing treatment (including cement plaster and cleaning with wire brushes roughening the surface and hacking out dirt where directed and diposal of rubbish not exc 500 mtr distance from starting point)/ cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as directed. |
| 70 | 15mm thick (average) screed bed /plaster in cement mortar 1:4 in order to maintain proper slope and base over existing roof surface for laying of APP based polymeric membrane, mixed with water proofing compound as per manufecturer instruction finished even and smooth without using extra cement all as specified and directed. |
| 71 | Applying evenly a tack coat of bitumen 85/25 conforming to IS:3384-1986 over plastered surface at the rate of 1.2 kg per sq.m including cleaning surfaces of density 0.87-0.89 kg per litre at 25 degree celcius and viscosity 70-160 CPS (bitumen primer shall be of make as of membrane) including preparation of surfaces complete all as specified and directed. |
| 72 | APP based polymeric membrane minimum weighing 3kg/sqm and minimum 4mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application dipped into APP modified mix and sealing all the overlap 75mm on length side and 100mm on width side of membranes by torching as per manufecturer's instructions by authorised applicator only after applying evenly a coat of bitumen on bottom of APP membrane and on top of joints of APP membrane all as specified and directed. |
| 73 | S&F Endura tiles/parking tiles 12mm thick having area exc 0.18 sqm but not exc 1.00 Sqm, having antiskidness as per site requirement laid as in flooring/steps etc.over 10-15mm thick screeding/bedding/backing etc. complete all as specified. |
| 74 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 75 | All item as per ser no 74 above but except tiles |
| 76 | S&F in repair 4 mm Thick aluminium composite clading of make PIONEER, ALUTECH, ALSTRONG, ALUDECOR protected with self adhesive protection film, erecting over the wall using aluminium frames at desired levels made with 50 x 25 x 1.2 mm extruded chanel section conforming to IS 7333 mechnical properties. The frame shall be fixed on external wall surfaces with necessary brackets, bolts, nut arrangements with screws aluminium L cleats, backer rod, wacker/dowcorning silicon sealant etc at all level & Heights filled in complete with necessary scaffolding upto height 7.00 m all as specified and directed |
| 77 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 78 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 79 | S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 80 | M & L for 75mm thick Plain cement concrete M-10 nominal mix, type C-2, using 40mm graded mechanically crushed stone aggregate as sub base to floor, surfaces finished even and fair complete all as specified and directed. |
| 81 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 82 | M & L for preparing new surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed. |
| 83 | Reinforced cement concrete M-25 (Design mix ) (using 20mm graded crushed stone aggregates) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 84 | Reinforced cement concrete M-25 (Design mix) (using 20mm graded crushed stone aggregates) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 85 | Reinforced cement concrete M-25 (Design mix) (using 20mm graded crushed stone aggregates) in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 86 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 87 | All as per srl item No. 86 above but 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders |
| 88 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in flat rough finished surfaces of concrete complete all as specified and directed. |
| 89 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams, etc. in flat rough finished surfaces of concrete complete all as specified and directed. |
| 90 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) in flat orugh finished surfaces of concrete complete all as specified and directed. |
| 91 | Material & Labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 92 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete all as specified and directed. |
| 93 | Taking down point wiring with aluminium/ copper conductor for light point, fan & socket point/ power point etc. complete including switches, sockets, holders, (batten or pendent type), ceiling rose, switch board, bell/buzzer, bell push, and making good to the disturbed surfaces of wall/ floor etc. to match with existing surfaces including white wash/ colour wash/ distempering to match with existing wall/ floor/ ceiling finishes, complete all as specified and directed. |
| 94 | Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 95 | Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified and directed. Please Enable Macros to View BoQ information |
