|
| 1 | Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. Doors of area 3 sqm and below. |
| 2 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc |
| 3 | Repairs to plaster in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 ms lead |
| 4 | Scraping White wash and colour wash |
| 5 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish |
| 6 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) one coat over one priming coat on old distempered surface |
| 7 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on old distempered work when shade is changed |
| 8 | Providing and fixing 15 mm thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part- 4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level on the existing frame work consisting of T-sections and Lsections suitably fixed according to tile size as per direction of Engineer-in-charge |
| 9 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 10 | Providing and fixing jet spray with 2'-6\\" long PVC pipe. With PTMT nut |
| 11 | Providing & Fixing in postion 15mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect. C.P. brass Bib cock long nose/ long body foam flow withoutflange |
| 12 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect. C.P. brass 15 mm stop cock Male and female end |
| 13 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect. C.P.brass 15 mm Concealed stop cock with flange. |
| 14 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 15 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Triple layer tanks |
| 16 | Curtain rod 25 mm dia aluminum pipe with brackets fixed in position including nails and screws etc. (Deodar Wood) |
| 17 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on old distempered work when shade is changed |
| 18 | 12.5mm thick cement plaster 1:3 on floors |
| 19 | Dismantling tile masonary or tile lining. |
| 20 | First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level |
| 21 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidatingfrom any lead |
| 22 | Cement Concrete 1:4:8 with 40 mm gauge stone ballast, mixing by mannual means |
| 23 | 12.5 mm thick cement plaster 1:3 |
| 24 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08 % and conforming to IS: 15622 of approved make in all colour sand shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 finesand), complete. (Soluble salt Print Penetration should be upto 1 to 2 mm after the tiles are fired & polished). Size 600x600 mm |
| 25 | Marble stone flooring with 18-20 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement :4 coarsesand) laid and jointed with grey cement slurry, including rubbing and polishing complete with Makrana, Doongri, Adanga viened and chack Doongri with grey stretches. Slabs sizes above 0.50 sqm |
| 26 | Providing and Fixing Dias in court complete in all respect |
| 27 | Curtain rod 25 mm dia aluminum pipe with brackets fixed in position including nails and screws etc. (Teak Wood) |
| 28 | Distempering with dry distemper of approved manufacture two or more coats on old distempetered surface when shade is changed |
| 29 | Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (code IS 2202-1 (1999) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges: 35 mm thick |
| 30 | Providing and fixing 15 mm thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part- 4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level on the existing frame work consisting of T-sections and Lsections suitably fixed according to tile size as per direction of Engineer-in-charge |
| 31 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES:Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- |
| 32 | Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface) |
| 33 | PVC INSULATED PVC SHEATHED FR ROUND FLEXIBLE COPPER CONDUCTOR CABLE: Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 0.75sq.mm (24/0.20mm), 2Core |
| 34 | Supply & erection of 6U Wall mount 19’’ Rack with glass door, lock & key facility 400/450/500mm depth. AC Fan having 10 no. mounting hardwar, cable entry/exit provision at top and bottom pannels. complete in all respects as per satisfaction of the Engineer in-charge at site. |
| 35 | Supply & erection of Advanced PA Amplifier with Built-in Digital Player System comprises of following features:- 220V AC & 12V DC operation ,125 watt PA Amplifier, 5 Mic & 2 Aux input MP3 Recorder & player USB & Card Reader Remote control Intelligent sound reinforcement Speaker output @ 4Ω 8 Ω & 70V /100V Active Bass & Treble Control LED Display with Multimedia control 2.5” built-in speaker to programme check 1 Year onsite warranty. complete in all respects as per satisfaction of the Engineer in-charge at site. |
| 36 | Supply & erection of wall mounting column speaker 15W/100V, frequency response 150-15,000Hz, 23 Watt max, SPL at 1kHz-91.5db/1W/1M, Power Tap 15/10/5/2.5Watt. |
| 37 | Supply & erection of 23” Gooseneck Microphone with stand having on/off switch, frequency response 20- 18,000Hz, Sensitivity 7.5mV/Pa, Power Source 1.5V- 9VDC, Impedance 1000Ω with 10 meter long Twin core shielded low noise cable with XLR connector & 6.3mm phone jack, heavy duty metal base with anti skid feet, Built in cell housing, 2 no. AA size cell. complete in all respects as per satisfaction of the Engineer in-charge at site. |
| 38 | Supply & Erection of VHF 2 no. wireless microphone with Mic on/ off/mute Feature complete in all respects as desired by the engineer in charge at site. |
| 39 | Supply and erection of High Revolving chair made of PU Foam with Mesh Fabric size 18\\"x 18\\"size of seat having Nylon wheel with Adjustable hydrolic and heavy plalte as approved by the engineer n charge |
| 40 | Supply and erection of Office Table made of 18mm thick 710 grade BWP ply size 5feet x 3feet and laminated with 1mm thick sunmica with PU polish of allside with one drawer and one box and on other side one venti as approved by the engineer n charge |
| 41 | Supply and erection of Center Table made of sheesha wood 2 feet x 4 feet with PU polish as approved by the engineer n charge |
| 42 | Supply and erection of Court room table made of 18 mm thick 710 grade BWP ply sixe 6 feet x 4 feet and laminated with 1m thick sunmica with PU polish of all sides with glass top as approved by the engineer n charge |
| 43 | Supply and erection of Computer table made of 18mm thick 710 grade BWP ply size 4 fft x 2 feet laminated with 1mm thick sunmica with PU polish as per approved by engineer incharge |
| 44 | Supply and erection of Sofa made of 40 density foam and jute fabric with ply 18mm thick base as approved by the engineer n charge |
| 45 | Supply and erection of Mid back revoling chair fixed made of 40 density PU foam with 2 inchi back and size 18\\"x 18\\"size of 4 inch as approved by the engineer n charge |
| 46 | Supply and erection of Curtains made of premium quality as approved by the engineer n charge |
| 47 | Supply and erection of Lawyer table made of 18mm thick j710 grade BWP ply soze 8 feeet x 2feet and laminated with 4mm thick tek with polish as approved by the engineer n charge |
| 48 | Supply and erection of Steel almirah of size (78\\"x 36\\"x 19 with 4 shelves making 5 compartment all made of 22 gauge epoxy power coated as approved by the engineer n charge |
| 49 | Supply and erection of Stool made of Sheesham/teak wood with PU polish top 18 \\" x 18\\" mm thick 710 grade BWP ply as approved by the engineer n charge |
| 50 | Supply and erection of Chairs made of Sheesham wood and 40 Density PU foam with 2 inch back and size 18\\" x 18\\" size of 4 inch seat (for retiring room and for Lawyer Table) as approved by the engineer n charge |
| 51 | Supply and erection of Table cum file rack made of 18 mm thick 710 grade BWP ply size 4 feet x 2 feet and laminated with 1 mm thick sunmica with PU polish of all side as approved by the enginner incharge. |
| 52 | Supply and erection of 3 Seater chair complete in all respect as approved by the engineer n charge |
| 53 | Foot RestProviding and fixing ply wood, plain lining,butt jointed including PVC Plug placed at 45 cm to 65 cm centers complete with necessary nails (Frame work shall be payable extra) 12mm thick decorative wood with teak faced on one side complete in all respect as approved by the engineer n charge |
| 54 | Supply and erection of Air conditioner hitechi/ voltas 1.5 ton 3 star split with stablizer complete in all respect as approved by the engineer n charge Please Enable Macros to View BoQ information |
