|
| 1 | Demolition of PCC in Ground Floor and paving n exc 15 cm (below or above ground level). |
| 2 | Dismantaling Stone slabs and tiles of any description or thickness in floors, aprons etc. |
| 3 | Dismantling of floors hearth or walls tiling and Stone floor including cement mortar bedded (but not backing) & removing serviceable tiles to store and rubbies of the premises |
| 4 | M&L for non skid ceramic coloured tiles of 7 to 8mm thick, (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm , as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified & directed by Engineer-in-charge. |
| 5 | S&F coloured glazed ceramic tiles size 300 x 450 x7 mm thick on vertical surfaces, set & joined in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including backing coat of 10mm thick in CM (1:4) all as specified & directed by Engineer-in-charge. |
| 6 | M&L 20 mm thick Granite imperial red work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.and black and including screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified & directed by Engineer-in-charge. |
| 7 | Taking down cement plaster on stone walls including raking out joints, hacking for key, scrubbing down with water all as specified |
| 8 | M & L for Cement plastering 15mm( thick in two layers -first layer 10mm thick with ready mix plaster and outer layer 5mm thick ready mix water proof plaster) on outer walls by adding potable water by weight of material as mentioned by manufacture ready mix plaster shall comply with IS- 1661-1972, IS-2402-1963, IS- 2250-1981 and shall confirm 28 days compressive strength 10-15 MPA, bulk density 1600-1800 kg/cum and pull out bond strength->0.5 MPA complete all as specified and directed |
| 9 | M & L for rendering 10mm thick ready mix plaster on internal wall by adding potable water by weight of material as mentioned by manufacture ready mix plaster shall comply with IS- 1661-1972, IS-2402-1963, IS-2250-1981 and shall confirm 28 compressive days cstrength 10-15 MPA bulk dencity 1600-1800 kg/cum and pull out bond strength-> 0.5 MPA omplete all as specified and directed. |
| 10 | M & L for rendering 5 mm thick ready mix self curing plaster on ceilling by adding potable water by weight of material as mentioned by manufacture ready mix plaster shall comply with IS- 1661-1972, IS-2402-1963, IS-2250-1981 and shall confirm 28 compressive days cstrength 10-15 MPA bulk dencity 1600-1800 kg/cum and pull out bond strength-> 0.5 MPA omplete all as specified and directed. |
| 11 | M&L preparation of new surfaces and applying two coats of Acrylic distemper over a coat of alkali resistant primer on surfaces of ceiling complete all as specified & directed by Engineer-in-charge. |
| 12 | M&L preparation of new wall surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer,including 3mm thick wall care putty on wall complete all as specified and directeded. |
| 13 | M&L for preparation of new plastered surface of wall and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work over 1.5 to 2mm thick wall care putty complete all as specified and as directed. |
| 14 | M&L preparation of new wall surface and applying three coat of white wash on surfaces of ceiling complete all as specified & directed by Engineer-in-charge. |
| 15 | M&L Finishing wall with Acrylic emulsion smooth exterior paint of reqd shade, new work (two or more coat) applied @ 1.67 Ltr/10 Sqm over and incl priming coat of exterior primer applied @ 2.20 Kg/10 Sqm complete. |
| 16 | M&L for Complete removal of existing water proofing treatment incl bedding if any n exc. 50mm thick etc. on any type of roof, cleaning with wire brushers etc. and removal of debris out side MD land complete all as specified and directed. |
| 17 | Dismantling Stone slabs in roofs, suspended floors , chajjas, landings, etc., any thickness, jointed in any mortar complete all as specified and as directed by the Engineer-in-Charge. |
| 18 | M&L for jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted, set, jointed and grouted in CM 1:3 as directed by the Engineer-in-Charge |
| 19 | M&L for jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted, set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6, except stone slabs complete all as specified and as directed by the Engineer-in-Charge |
| 20 | M&L for 50mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate for levelling course as per the site requirements all as directed by Engr-in-Charge. |
| 21 | M&L for 10mm thick screed plaster on roof for laying in CM 1:4 waterproofing treatment, with using WPC (WPC will be measured and paid separately as supply only) |
| 22 | Supply only integral Waterproofing compound. |
| 23 | M&L for water proofing treatment with 3 mm thick APP (Actatic Poly Propylene) modified membrane reinforced with non woven polyester mat of weight 150 gms/sqm as centre core & without multiple layers of polyethylene applied by thermo fusion using LPG torch on the bottom portion of the membrane after applying a coat of bituminous primer @ 0.3 kg/sqm over roof (an overlap of 100 mm & 150 mm shall be provided on sides & end respectively )including a coat of bitumen grade 85/25 @ 1.20 Kg/Sqm complete all as per specified and directed. |
| 24 | M&L for 50 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregates) as in plinth protection finished even and fair w/o using extra cement |
| 25 | Taking down door chowket or frame incl shutter area n exc 1.50 sqm each complete all as per specified and directed. |
| 26 | Taking down door chowket or frame incl shutter area exc 1.50 sqm but not exc 4 Sqm complete all as per specified and directed. |
| 27 | M&L for Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 28 | M&L for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 29 | M&L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 |
| 30 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantcomplete as per direction of Engineer-in-Charge Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall beacceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 31 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge as per specification & drawing and incl supply and fixing following items:-(a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 3 nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf(d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x3000mm - 1 nos per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leaf |
| 32 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqn in each pane. |
| 33 | M&L for Preparing new steel surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 34 | M&L for Preparing of old steel surfaces of any description exceeding 10 cm in width or girth and applying one coats of synthetic enamel painting omplete all as specified and directed. |
| 35 | Dismantling Water Tanks & removing from site, capacity of tanks exc 250 ltr and n exc 500 ltr complete all as per specified and directed. |
| 36 | Supply and fix rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I ,500 ltr capacity including, 20mm dia Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as per specified and directed. |
| 37 | Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15 mm bore to walls, ceiling etc. |
| 38 | Taking up or down steel tubing and connections including cleaning for refixing or removal to store 20 mm bore to walls, ceiling etc. |
| 39 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in stone, concrete block or slab walls |
| 40 | S&F CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 16 mm bore with all fittings , to walls, ceiling or laid in floors etc. |
| 41 | S&F CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 20 mm bore with all fittings , to walls, ceiling or laid in floors etc. |
| 42 | S&F CPVC Ball valve or gate valves and fixed in repairs to 16 mm bore pipe. |
| 43 | S&F CPVC Ball valve or gate valves and fixed in repairs to 20 mm bore pipe. |
| 44 | S & F in repair Angular Stop Cock, CP, fency type with wall flanAGE, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete fixed as in repair in all respect all as specified.Make : Jaquar / Hindware / Cera / Prayag or equivalent as approved by Engr-In-Charge |
| 45 | S&F in repairs for stop cock copper alloy but fancy type and chrominum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron/pipe or for union and fixed 15 mm bore complete all as per specified and directed. |
| 46 | S&F in repair bib taps cast cipper alloy chromoum plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as per specified and directed. |
| 47 | S&F in repair Viterious china White Wash Hand Basin of size 550 x 400 mm fixed in repairs includign 15 mm pillar cock cast copper alloy CP, 15mm cast copper stop valve, 32 mm brase CP waste fitting, PVC waste pipe 32 mm dia & 15 mm PTMT connection pipe 450 mm long complete all as per specified and directed. |
| 48 | S & F repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as per specified and directed. |
| 49 | S&F in repairs Soap disc CP fixed in position complete fixed as in repair in all respect all as specified and as pproved by Engr-In-Charge |
| 50 | S&F in repairs towel rail 600 mm long of Brass C.P 'D' type fixed with and including chromium plated brass screws and wooden /plastic cheats complete all as per specified and directed. |
| 51 | S&F in repairs PVC connections 15 mm size with PTMT nuts to length 450 mm. |
| 52 | S&Fin repairs PVC flushing cistarn 10 ltrs capacity ISI marked incl, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as per specified and directed. |
| 53 | Dismantling of cast iron Rcc, Ac or PVC pipe jointed in CM any dia bore |
| 54 | S&F PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls |
| 55 | S&F PVC (SWR) pipes of 75 mm dia, single socket fixed to walls |
| 56 | PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia out let |
| 57 | S&F PVC (SWR) bends of 110 mm dia, any radius |
| 58 | S&F PVC (SWR) bends of 75mm dia, any radius |
| 59 | S&F (PVC (SWR) vent cowl, 100 mm dia |
| 60 | Supply and fix in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as per specified and directed. |
| 61 | Demolition of stone/ boulder masonry and built in cement mortar all as specified & directed |
| 62 | M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) all as specified & directed by Engineer-in-charge. |
| 63 | M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) but Except stone all as specified & directed by Engineer-in-charge. |
| 64 | Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses all as specified & directed by Engineer-in-Charge. |
| 65 | M&L for 100mm thick PCC Type D-2, 1:4:8 using 40mm graded stone aggregate as in sub bases all as specified. |
| 66 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. complete all as specified. |
| 67 | M&L For PCC Type B1 1:2:4 (20 mm graded aggregate) Providing, cement concrete in kerbs of mud stops, rounded or chamfered on edges |
| 68 | M&L for Vitrified ceramic tiles, Light Shade 10mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match with and including provision of 15 mm thick screed bedding in CM (1:6), complete all as specified and directed. |
| 69 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles with screed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6. all as specified. |
| 70 | M&L for PCC type D2 1:4:8 using 40mm graded stone aggregate, 75 mm thick as in sub base for floors, complete all as specified and directed. |
| 71 | M&L for 5cm sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4, complete complete all as specified and as directed by the Engineer-in-Charge |
| 72 | M&L for Roughly squared stone lintels hammer dressed on face and soffits, hoisted, set and pointed in lime mortar 1:3 or cement mortar 1:6 complete, n exc 3m in length complete all as specified and as directed by the Engineer-in-Charge |
| 73 | M & L for Jaisalmer stone for wall cladding (of any type) 35-55 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of stone , exc .0.06 sqm but not exc 0.11 sqm ,including cutting and polishing types in wall including 20 mm thick CM 1:4 for laying Jaisalmer stone complete all as specified and direction by the Engineer-in-Charge. |
| 74 | M&L for rendering 15mm thick plaster on stone masonry surfaces in cement mortor (1:6) finished the surface even and smooth without extra cement. |
| 75 | M&L Rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) |
| 76 | M&L for Flush Pointing single joints in masonry in detached work, flashings, etc. on ceiling in CM (1:4) complete all as specified & directed. |
| 77 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate for levelling course for consolidated thickness shall be varied from 25 to 55 mm as per the requirements all as directed by Engr-in-Charge. |
| 78 | Providing and fixing factory made aluminium casement windows with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60 x 44.45 x 1.29 mm and shutters made of 63.5 x 31.75 x 1.29 mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36 mm dia and 1.40 mm aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :(a) Stainless Steel (304 Grade) Finished Butt Hinages 125mm - 2 nos per leaf(b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf(c) Powder Coated Aluminium Handles 150 mm - 2 nos per leafcomplete all as per specified and directed. |
| 79 | S&F Factory Made Solid PVC Moulded Door Shutter With Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as per specified and directed. |
| 80 | S & F Factory made ISI marked flush door shutters 35mm thick, BWP conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 2nd class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters complete all as specified and including supply and fixing following items As approved by Engr-In-Charge :(a) Stainless Steel (304 Grade) Finished Butt HinAGEs 125mm - 3 Nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf(d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leafcomplete all as per specified and directed. |
| 81 | S & F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-I section 8 clause 8.20 (a) kiln seasoned and chemically pressure treated all as specifeid including stainless steel 304 grade wire cloth ( 0.36mm nominal dia of wire and averaage width of aperture 1.40 mm ) and incl supply and fixing following items:-(a) Stainless Steel (304 Grade) Finished Butt HinAGEs 125mm - 3 nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf(d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x3000mm - 1 nos per leaf(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leafcomplete all as per specified and directed. |
| 82 | Powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below middle/lock rail and 5mm thick tinted glass above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and incl mortice lock with duplicate keys etc complete all as specified and directed approved by Engr-In-Charge including supply and fixing the following items:(a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf.(b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf(c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf |
| 83 | Providing and fixing powder coated 50 microns extruded aluminium in 3 Tier Track Sliding Windows/glazing, with frame of section 100x44-45x1.30mm, track of size 100x38.10x1.30 & shutters made of size 32x18x1.3mm, with and including 4mm thick tinted sheet glass selected quality fixed in 2 shutters and stainless steel wire gauge 0.36mm nominal dia of wire and average width of aperture 1.40mm in one shutter and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size and also including powder coated 150mm handle with built in locking system for each leaf complete all as specified. |
| 84 | Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 85 | S&F 100 mm long mild steel but hinges medium weight colld rolld. |
| 86 | S&F 200 mm long Aluminium anodised barrel tower bolt of extruded section. |
| 87 | Supply and fix 150mm long Extruded aluminium alloy handles, 150mm long fabricated type., anodised |
| 88 | S&F Stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc all as specified & directed as in repair .Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered as approved by Engr-In-Charge. |
| 89 | M & L for preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint, first quality, over a coat of pink primer on wooden surface complete all as specified and as directed. |
| 90 | S & F in repair Vitreous china premium/1st quality wash down water closet pan floor mounting Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) white colour including CI S/P trap as directed including connection to drain (or out going pipe) and to flushing pipe, antisyphonage pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete in all respect all as specified. |
| 91 | S & F in repairs brass chromium plated Health faucet with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as approved by Engr-In-Charge |
| 92 | Supply & Fixing in repair chromium plated shower rose 125mm round shape fancy type fixed to 15mm bore pipe all as specified and as approved by Engr-In-Charge |
| 93 | S & F in repair Toilet paper holder with flat recessed type stainless steel Coomplete all as specified and directed. |
| 94 | S&F in repairs 15mm bore Brass CP mixer for mixing hot & Cold water screwed down for iron pipe complete all as directed by Engineer in Charge. |
| 95 | Supply & Fixing in repair Corner glass shelf size 300 mm radius with and including bracket and glass complete set etc complete all as per specified and directed. |
| 96 | Supply & Fixing in repair Glass shelf size 600 mm long with and including bracket and glass complete set etc complete all as per specified and directed. |
| 97 | Supply & Fixing in repair stainless steel Towel Rack with lower hanger size 24'' (600 mm) fixed to walls with hook etc as approved by Engr-In-Charge |
| 98 | S & F in repair Bib taps, CP, fency type long nose with wall flanage screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified. |
| 99 | S&F in repairs 15mm dia Bib tap (2 in 1 type) of brass, chromium plated fancy type glossy finish complete all as specified and directed. |
| 100 | S & F in repairs PVC mirror cabinet of size 300x450mm of selected quality glass fixed in PVC cabinet all as specified and directed. |
| 101 | Supply & fixed in repairs stainless steel sink with drainage board , made out of 1.00mm thick sheet for kitchen or laboratory with plug,washers, waste pipe, cast irn cantilever bracket of overall size 915x460mm bowl size 410x330x160mm complete all as specified. |
| 102 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets |
| 103 | S&F for anodised aluminium snap grid 605 x 605mm frame for ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 104 | S&F for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as per specified and directed. |
| 105 | Demolition of plain cement concrete (Un reinforced) in benching and surface channels,bedding etc. below or above ground level. |
| 106 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar as in concrete bed, haunching set in cement mortar of 150 mm Dia complete all as specified. |
| 107 | Excavation in trenches n.exc 1.5m deep and n.exc 1.5m wide in manholes, sewage lines etc. and getting out any type of Soil complete all as specified. |
| 108 | M&L for plain cement concrete 1:4:8 Type D2 using 40mm graded aggregateas in foundation, filling in mass concrete for manholes & drains. |
| 109 | M&L for plain Cement concrete 1:2:4 Type B1 using 20 mm graded aggregate as in benching and surface channel of Manholes. |
| 110 | M&L for plain cement concrete 1:3:6 Type C1 using 20mm graded aggregate as in coping including form work etc complete. |
| 111 | M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl, forms mould, mi-tred/stopped ends etc. |
| 112 | M&L for reinforced concrete NP2 drain pipes 150 mm Dia pipes confirming to IS laid in trenches and jointed in CM 1:2 all as specified & directed by EIC |
| 113 | M&L for Concrete bed to drain pipes including packing under haunching against the sides of pipe after they are laid and tested; in cement concrete 1:4:8 type D-2 for 150mm dia pipe complete all as per specified and directed. |
| 114 | Returning filling in soil including spreading, levelling and well ramming in layers n.exc 25cm thick in layer etc all complete. |
| 115 | Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 116 | S&F 100 bore of pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof. |
| 117 | Dismantling of Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) |
| 118 | Material & Labour for 35mm thick precast cement concrete louvres and jallies type C-0 (1:3:6) using 12.5mm graded stone aggregate (measured solid), in cluding all mouldings and frame set in cement mortar 1:4 complete all as per specified and directed. |
| 119 | M & L for Providing precast cement concrete type B-1 (1:2:4) with 20mm garded stone aggregate in copings.apex stones,columns, posts, boundary pillars, frame of jallies etc and setting in mortar 1:4 complete with joints to match complete all as per specified and directed. |
| 120 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified & directed by Engineer-in-Charge. |
| 121 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 290 Gde E-165 complete all as per specified and directed. |
| 122 | E&M Items :-Taking down carefully existing point wiring of any description light, fan,sockets,bells etc) complete including fittings such as terminal boxes, switches, sockets, ceiling rose, lamp holders, brackets sketch fittings, pendants, fan regulartors and making good the disturbed surfaces, walls, floors etc. all as directed by EIC |
| 123 | Taking down old unsv MCB DB / main switch incl MCBs / MCCBs complete all as specified and directed |
| 124 | Taking down existing sub main wiring /Service wire of any description and size including earth wire, quities and making good disturbed surfaces of walls, floors etc. Including one run of 2mm dia bare earth continuity wire all as specified including taking down of sub main wiring.(Note : Two runs of aluminium / Copper conductor, and one run of GI earth wire will be measured and paid as one unit only) |
| 125 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. for stone concrete block or slab walls and making good, cutting exceeding 20cm girth |
| 126 | M&L point wiring complete with 1.5 Sqmm single core PVC insulated FRLS cable 1100 Volts grade multistranded copper conductor drawn through in PVC Conduit concealed on underground stone / brick, masonry walls, roofs floors etc including MS terminal boxes fabricaterd out of 1.12mm thick MS sheet sunk type / surface type and laminated top sheet of 2mm thick for housing switches sockets, regulators etc including provn of 1.5 sqmm dia copper conductor for earth wire connected to common dolly for One light point / Fan point / Exhuast Fan / Bell point controlled by one 5 Amps One way switch and making good surfaces all as specified and directed by Engineer-in-Charge. |
| 127 | All as per Item No. 120 but for one 3 pin 5/6 Amps switch socket outlet on same board |
| 128 | All as per Item No. 120 but for one 3 pin 5/6 Amps switch socket outlet on independent board |
| 129 | All as per item No. 120 above but wiring with 4.0 Sq mm and 4.0 sqmm for earth continuity for 3 pin 15/16 Amps switch socket combination |
| 130 | M&L switch Modular switch 1 way 6A, 1 module single pole complete all as specified and directed. |
| 131 | M&L Modular switch 1 way 16A, 1 module single pole confirming to IS 3854 : 1997 complete all as specified and directed. |
| 132 | M&L switch piano flush type single pole one way 5 Amps complete all as specified and directed. |
| 133 | M&L switch piano flush type single pole one way 15 Amps complete all as specified and directed. |
| 134 | M&L Switch Socket Combination outlet, multipurpose, 2 pin 5 amps/3 pin 5 amps controled by one switch 5 amps, flush type complete all as specified and directed. |
| 135 | M&L Universal socket outlet with shutter, 5/15 amps controlled by one switch 15 amps, flush type complete all as specified and directed. |
| 136 | S&F S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd all as specified and directed |
| 137 | S&F Moidular Bell Push Modular Bell push 6A 1 module |
| 138 | S&F in repair Buzzer, Ding Dong AC. 230 volts, single pole |
| 139 | M&L Modular Socket 6A 2/3 pin combined 2 module outlet, multipurpose complete all as specified and directed. |
| 140 | M&L Modular Socket 16/6A 3 pin combined 2 module outlet, multipurpose complete all as specified and directed. |
| 141 | S&F Electronic type Modular fan step regulator 120W, 2 module AC 240 V all as specified and directed |
| 142 | M&L Modular white cover plate with frame ( both inner & outer plate cover) 1 module |
| 143 | M&L Modular white cover plate with frame ( both inner & outer plate cover) 3 module |
| 144 | M&L Modular white cover plate with frame ( both inner & outer plate cover) 6 module |
| 145 | M&L Modular white cover plate with frame ( both inner & outer plate cover) 8 module |
| 146 | M&L lamp holder insulated body with back plate suitable for battern fittings |
| 147 | Supply and fix in repair LED Lamp Retro fit type 9 watts 230 V and all as specified by Engr-in-charge |
| 148 | S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminais all as specified |
| 149 | S&F in repair Sheet Modular metal enclosure DB SPN 240 Volts 8 Way single door type with 200 Amps busbar for fixing of MCBs |
| 150 | S&F MCB in repair Single pole and neutral, 40A, 240 Volts AC, 'C' Curve all as specified |
| 151 | S&F MCB in repair Single pole, 5-32A, 240 Volts AC all as specified |
| 152 | M & L Submain wiring with 2 runs of single core 4 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC concealed conduit underground stone / brick, masonry walls, roofs floors and conduit accessories of medium grade not less than 25mm dia including one run of single core 4 sqmm PVC insulated FRLS sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain wiring including making good surfaces complete all as specified and as directed. (Note : Two runs of copper conductor and one run of copper earth wire will be measured and paid as one unit only) |
| 153 | Supply and fixing in repair LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 154 | Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 v AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 155 | S&F Modular metal flush box 1 module all as specified and directed. |
| 156 | S&F Modular metal flush box 3 module all as specified and directed. |
| 157 | S&F Modular metal flush box 6 module all as specified and directed. |
| 158 | S&F Modular metal flush box 8 module all as specified and directed. |
| 159 | Supplying and fixing in repair 1100 volts grade heavy duty cable PVC insulated aluminium strended conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen ded by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular of size 10 sqmm complete. |
| 160 | S&F in repair Sheet Modular metal enclosure DB SPN 240 Volts 12 Way single door type with 200 Amps busbar for fixing of MCBs |
| 161 | S&F in repair MCB SPN 40A amp rating 240V, 10KA 'C' series fixing in DB's including connecting with bottle type copper thimble complete all as specfied and directed by Engr-in-Charge. |
| 162 | S&F in repair MCB SP 6 to 32A amp rating 240V, 10KA 'C' series fixing in DB's including connecting with bottle type copper thimble complete all as specfied and directed by Engr-in-Charge. |
| 163 | S&F in repair service bracket for street light fitting made out of 40mm GI pipe of suitable dia light grade not less than 1.2 mtr long, bent to 115 degree shape, fixed to Pole/Wall in any position with 2 Nos 32 x 6mm GI Clamp, nuts, bolts, washers etc complete all as specified and directed |
| 164 | Supply and fixing in repair LED street light fitting 15 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 165 | M&L Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.5 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead all as specified including taking out old u/s existing earthing. Please Enable Macros to View BoQ information |
