|
| 1 | Excavation in foundation in ordinary soil (loam,clay andsand) including lift upto 1.50 m and lead 50 m & includingfilling, watering and ramming of excavated earth into thetrenches to the space between the building and the sides offoundation trenches or into the plinth and removal anddisposal of surplus earth D.S.R No. 2.6.1 |
| 2 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. (Under Floor) as per DSR.No. 2.25 (a) |
| 3 | Providing and laying in cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone ballast 40 mm nominal size) and curing complete, including cost of form- work, in foundation.(DSR-4.1.8) |
| 4 | Providing and injecting chemical emulsion for pre constructional -creating a chemical barrier under the around the column pits, walltrenches,effacement excavation top surface of plinth ,filling junction of wall and floors ,along the external perimeter of building expansion joints etc complete Plinth area of the building at ground floor only shall be measured as per IS 6313 (part II 1981) Aldrine emulsifiable concentrate or any other approved material such as chloropyriphos or heptatachlor or chlodrance will be used the rate of aplication of chemical emulsion shall be as follows- i)Treatment for masonary and foundation/top surface of plinth filling/soil under apron along external perimeter 5 Itr per sqm (ii) backfill in immediate contact with foundation/junctions of walls and floors /soil along external perimeter of building @ 7.5 ltr per sqm As per D.S.R No. 2.35.3.1 |
| 5 | Providing and laying in cement concrete 1:3:6 (6: stoneballast 40 mm gauge nominal size: 4 coarse sand: 1cement) including supply of all materials,labour and T&Pet.required for proper completion of the work and curringcomplete,also including cost of form work In foundation andfloors. As per D.S.R. No. 4.1.5 |
| 6 | M-150 class brick work in 1:4 cement and coarse sandmortar in in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of thework As per DS.R. No. 6.1.1 |
| 7 | M-150 class brick work in 1:4 cement and coarse sandmortar in Super Structure including supply of all materials,labour and T&P etc. required for proper completion of thework as Per D.S.R. NO. 6.4.1 |
| 8 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dresing complete.DSR 2.27 |
| 9 | R.C.C. work with cement approved coarse sand and 2 cm. Gauge approved stone grit in propottions of 1:2:4 in lintels of door and windows excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, T&P etc required forproper completion ofthe work including cost of binding wire. The rate excludes making of drip course which shall be paidextra as per D.S.R. No. 5.1.3 |
| 10 | P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. DSR 5.22.6 |
| 11 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)DSR No. 13.1.2 |
| 12 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. DSR 13.83.2 two coat |
| 13 | Providing and applying whte cement based putty of average thickness 1mm of approved brand and manufacture over the plastered wall surface to prepare the syrface even and smooth complete. DSR 13.80 |
| 14 | Supply and fixing of rolling shutter of approved make including all complete as per DSR N.O 10.6.1 |
| 15 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint ofapproved brand and manufacture as per DSR no. -13.62.1 |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete DSR 5.9.1 |
| 17 | 25mm thick Kota stone flooring over 20mm thick base including all DSR 11.26.1 |
| 18 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with mdular type switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 19 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class pvc conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 20 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. |
| 21 | 2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire |
| 22 | 2 x 10 sq.mm. + 1 x 6 sq.mm. Earth wire |
| 23 | Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required. |
| 24 | Supply and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required :25 mm. |
| 25 | 32 mm. |
| 26 | Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C' series, miniature circuit breaker (MCB)suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. single pole DSR 2.10 |
| 27 | Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. |
| 28 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections butexcluding modular plate etc. as required. DSR 1.245/6 A switch |
| 29 | 3 pin 5/6 A socket outlet |
| 30 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 31 | Supply and fixing of LED Tube Light with batten suitable for up to 2 X 22 watt LED tube light fitting including tube on Surface complete in all respect. CAT- AAA Please Enable Macros to View BoQ information |
