|
| 1 | Earth Work in exavation of foundation in hard soil within initial leads of 50m & lifts of 1.5m including dressing and levelling of bed etc. and adding contractor's profit and over head charges, etc. complete in all respect |
| 2 | Filling foundation and plinth with excavated earth including conveyance ,royalty of all materials labour, T&P, etc. complete. |
| 3 | Filling foundation and plinth with sand including all cost, conveyance, tax, royalty of materials required for the work etc., complete as directed by the E.I.C. |
| 4 | Cement Concrete (1:3:6) using 4cm. Size H.G.metal including all cost, conveyance, tax, royalty of materials etc., complete. |
| 5 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying etc with cost conveyance and taxes of all meterial etc. complete. (A) Column Foundation |
| 6 | (B) Column & Beam |
| 7 | (C) Lintel |
| 8 | (D) Chajjah Loft |
| 9 | (F) Staircase |
| 10 | (G) Roof Slab |
| 11 | (H) Plinth protection & Courtyard |
| 12 | Supplying,fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 13 | 25mm thick CC 1:2:2 with 6mm size CB chips for grading concret over roof slab etc. complete. |
| 14 | Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Foundation and Plinth including watering curing, cost of carriage and royalty of all materials, cost of all labour, etc complete. |
| 15 | Fly ash Brick work in C.M. (1:6) in superstructure including all cost, conveyance, tax, royalty of all materials and all labour, T&P, etc. complete. |
| 16 | Supplying of Iron door and windows with grills of approved design etc., including all cost, conveyance, labour etc., required for the work complete. |
| 17 | 6 mm thick cement plaster in c.m. (1:4) to R.C.C. surfaces finished smooth including closed deep chiping and slury treatment with Cost, Conveyance and taxes etc. complete. |
| 18 | 16mm. Cement Plaster in C.M. (1:6) over Brick work including all cost, conveyance, labour, etc., required for the work complete as directed by the E.I.C. |
| 19 | 12mm. Cement Plaster in C.M. (1:6) over Brick work including all cost, conveyance, labour, etc., required for the work complete as directed by the E.I.C. |
| 20 | Supplying,fitting & Fixing Vetrified Tiles in floors of size 600mm X 600mm of approved make with application of polymer modified cement based water resistant adhesive bed of required thickness of 10mm and filling joints with epoxy grout of approved quality including cost of all materials,labour T&P etc required for the work. |
| 21 | Fixing tiles in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. |
| 22 | Supplying, fitting and fixing tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C. |
| 23 | Finishing wall surface with Cement based wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete. |
| 24 | Wall painting two coats with plastic emulsion paint of approved shade over a coat of primer on new work to give an even said including cost of plastic emulsion etc. complete. |
| 25 | Providing two coat weather coat paint over a coat of wall primer including cost of all materials etc. complete. |
| 26 | Painting two coats over a coat of primer on new wood/iron work with any approved enamel paint including cost of all materials etc. complete. |
| 27 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk ) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 28 | Providing, supplying, fitting, fixing of flush door with laminated finish inlcuding all fitting materials required for the work, etc. complete. |
| 29 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 151-154, 151-155, as windows frame section No. 151- 155, 151-153 and 151-167 as shutter framewith 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting includingcost of materials all taxes labour, T&P etc. complete as per direction of Engineer-incharge. Data for 1.49 sqm |
| 30 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect. |
| 31 | Earthwork in all kinds of soil in excavation of foundation with initial lead & lift including roughdressing and levelling the the beds, cost of all T&P labour etc.complete. Compound Wall |
| 32 | Filling foundation and plinth with sand including all cost, conveyance, tax, royalty of materials required for the work etc., complete as directed by the E.I.C. Compound Wall |
| 33 | Cement Concrete (1:3:6) using 4cm. Size H.G.metal including all cost, conveyance, tax, royalty of materials etc., complete. Compound Wall |
| 34 | R.C.C. work of M-25 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying etc with cost conveyance and taxes of all meterial etc. complete. (A) Column Foundation Compound Wall |
| 35 | (B) Column & Beam Compound Wall |
| 36 | Supplying,fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. Compound Wall |
| 37 | Fly ash Brick work in C.M. (1:6) in foundation including all cost, conveyance, tax, royalty of all materials and all labour, T&P, etc. complete. i) For Foundation Compound Wall |
| 38 | ii) For Super Structure Compound Wall |
| 39 | 12mm. Cement Plaster in C.M. (1:6) over Brick work including all cost, conveyance, labour, etc., required for the work complete as directed by the E.I.C. Compound Wall |
| 40 | Providing two coat weather coat paint over a coat of wall primer including cost of all materials etc. complete. Compound Wall |
| 41 | Earthwork in all kinds of soil in excavation of foundation with initial lead & lift including roughdressing and levelling the the beds, cost of all T&P labour etc.complete. Paver Block |
| 42 | Filling foundation and plinth with sand including all cost, conveyance, tax, royalty of materials required for the work etc., complete as directed by the E.I.C. Paver Block |
| 43 | Cement Concrete (1:3:6) using 4cm. Size H.G.metal including all cost, conveyance, tax, royalty of materials etc., complete. Paver Block |
| 44 | Providing and laying factory made chamfered edge Cement concrete paver blocks of required strength, thickness (80 mm) size (0.0427 Sqm.)/shape, made by table vibratory method, to attain superior smooth finish using PU or equivalent moulds, laid in required colour and pattern over 50mm thickcompacted bed of coarse sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in foothpath, parks, lawns, drive ways or light traffic parking etc. including cost of all materials, labour T&P etc. required for the work all complete as per manufacture's specification and direction of the Engineer-in-Charge. Paver Block |
| 45 | Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) Group A |
| 46 | -do- Group B |
| 47 | -do- Group C |
| 48 | Recessed wiring to Fan Point in. |
| 49 | Recessed wiring to Call Bell Point in. |
| 50 | Recessed wiring to Exhaust Fan Point in |
| 51 | S/F of Angle holder replacing Ceilling Rose |
| 52 | S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof. |
| 53 | S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4) |
| 54 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. |
| 55 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 6 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required |
| 56 | S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC |
| 57 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover. |
| 58 | S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection. |
| 59 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 2 Modular box with base & cover |
| 60 | 4 Modular box with base & cover |
| 61 | 6 Modular box with base & cover |
| 62 | 8 Modular box with base & cover |
| 63 | Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x1.5+1x1.5 (1.8.1) |
| 64 | 2x2.5+1x1.5 (1.8.2) |
| 65 | 2x4+1x1.5 (1.8.3) |
| 66 | 2x6+1x2.5 (1.8.4) |
| 67 | Inverter wiring (1x2.5smm) Copper wire (1.19.11A) |
| 68 | S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) |
| 69 | S/F of 'B/C/D' series DP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing Distribution board ISI marked complete with connection, testing and commissioning etc. as required (2.6.2a)+(2.3.1b) |
| 70 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of MCB 8 way Double door (2.3.6) |
| 71 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 ) |
| 72 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 73 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 74 | Providing & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31) |
| 75 | S/F of 300 Exhaust fan with all accessoriesand connections (Make Usha-Aero Clean Plus DBB/ Polycab-Fresh on DBB/ Cropmton-Trans Air12\\" reversible/ Havells-Ventil Air DS(HS)/ Anchor-Anmol Delus R/ Orient-Power Flow DBB) |
| 76 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 77 | S/F of 18-25 wt. LED single strip tube. Light fittingwith all accessories & connection (make Havels/HPL/Crompton/Polycab/PAC) |
| 78 | S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS) |
| 79 | Fixing /I.T.C. of stepped type Modular regulator (1.25a) |
| 80 | S/F of 20mm dia down rod with all accessories (1.39+1.41) |
| 81 | Supply & fixing of superior type C.I bulk head fitting with 9W Led Bulb for general domestic use ISI marked square / oval type with premetallic glass cover provided with galvanized steel wire guard including necessary connections. ( M-5 ) |
| 82 | S/F of 60 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells ) |
| 83 | S/F of 12w Watt LED Bulb |
| 84 | S/F of 1650VA/12V Inverter with 1 no 180Ah battery including trolley arrangement (Make: V-Guard/ Microtake/ Luminous |
| 85 | S/F of 6 sqmm twin core unbonded aluminium service connection wire with no.10 G.I. Guard wire to support the aluminium wire |
| 86 | Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30 in depth and depositing the soil as per direction of EIC. Initial lift upto 1.50m3.54 m x 2.54 m x 1.50 m =13.487 cum |
| 87 | From 1.50m to 3.00m depth , 3.54 m x 2.54 m x 0.70 m =6.294 cum |
| 88 | Supplying all materials, labour T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC, 3.54 m x 2.54 m x 0.15 m =1.348 cum |
| 89 | Supplying all materials labour T&P and providing c.c. (1:3:6)using 4cm hg metal including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC., 3.54 m x 2.54 m x 0.15 m =1.348 cum |
| 90 | Supplying all materials labour, T&P and providing c.c. (1:1.5:3) using 12mm hg chips including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC, 3.54 m x 2.54 m x 0.10 m =0.899 cum, 2.54 m x 1.54 m x 0.038 m= 0.148 Cum |
| 91 | Supplying all materials labour T&P and providing brick work with Fly ASh Bricks having c. s. not less than 75Kg/cm2 with dimensional tolerance +-8% in cm (1:3)including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and dir of EIC, ( a) In F&P in cm (1:3), 2 x ( 3.24 + 1.54 ) m x 0.35 m x 1.00 m= 3.346 cum & 2 x ( 3.00 + 1.54 ) m x 0.23 m x 1.00 m = 2.088 cum |
| 92 | Supplying all materials labour T&P and providing c.c. (1:1.5:3) using 12mm hg chips for RCC works including hoisting laying, watering, curing, conveyance of all materials to work site payment of royalty taxes etc. all complete as per specification and direction of EIC, 3.00 m x 2.00 m x 0.125 m=0.75 cum |
| 93 | Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire and 18 to 20 gauge conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.- |
| 94 | Supplying all materials labour T&P and providing rigid and smooth centering and shuttering for RCC works including false work and dismantling them after casting including conve4yance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC- 2 x (3.00 + 2.00 ) m x 0.125 m =1.25 sqm & 2.54 x 1.54 m = 3.911 sqm |
| 95 | Supplying all materials labour T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC. ( a )12mm thick CP (1:3), 4 x 0.40 x 0.60 m = 0.96 sqm |
| 96 | Supplying all materials labour T&P and providing cement punning including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.Same as above item 12mm C.P in 1:3 |
| 97 | Supplying all materials labour T&P and providing cement flush pointing to brick masonry (1:3) including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC, 2 x ( 3.24 + 2.24 ) m x 1.00 m = 10.96Sqm, 2 x ( 3.00 + 2.00 ) m x 1.00 m = 10.00 Sqm & 2 x ( 3.24 + 2.00 ) m x 0.12 m = 1.257 Sqm |
| 98 | Filling F&P with excavated materials including watering and ramming as per direction of EIC |
| 99 | Supplying all labour materials T&P and fixing of 2 RCC baffle wall precast with cc (1:1.5:3) using 12mm bhg chips for fitted to septic tank as per PH specification and direction of EIC.1.75 m x 0.45 m |
| 100 | Supplying all materials labour T&P and providing fitting and fixing SW Tee in wall including filling the necessary with cement concrete (1:2:4) with 12mm size hg chips all complete materials to as per specification and dir of EIC.100x100x100mm PVC Tee/Y |
| 101 | Supplying all labour materials T&P and fixing of MS step iron in 20mm dia MS steel bar and fixing into walls of septic tank duly embedded in c.c. (1:3:6) all complete as per PH specification and direction of EIC- |
| 102 | Supplying all materials labour T&P and providing precast RCC manhole cover with cc (1:12:3) of 12mm hg chips including conveyance of all materials to site after payment of royalty and taxes etc. all complete as per PH specification and direction of EIC-(size 550mmx550mmx76mm) |
| 103 | Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C, Door - 2 x ( 2.10 + 2.10 + 0.75 ) =24.75 |
| 104 | Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gel coat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrene(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy weight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. Door - 2 x 2.05 x 0.70 = 7.20 |
| 105 | Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles in walls / dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC. Toilet-1x 2 x( 2.10+1.50)x 1.82 =14.40 sqm Toilet-1x2x( 2.10+1.50)x1.82 =14.40 sqm Toilet-1x2x( 2.10+1.50)x1.82 =14.40 sqm |
| 106 | Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. First Floor, Toilet 2 x 2.10x 1.50= 6.30 sqm Toilet- 1 x 2.10x 1.50= 3.15 sqm |
| 107 | Supplying all materials labour T&P and providing painting two coats with approved cement paint on plastered surface etc. all compt as per specification and direction of EIC. |
| 108 | Supplying all materials, labour, T&P and cutting holes through brick/stone masonary works including making good the damages in c.m. (1:4) for taking P.V.C. pipes & fittings etc. all complete as per P.H. specification and direction of E.I.C. |
| 109 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. |
| 110 | Supplying all materials, labour T&P and fixing Wash Down Water Closet(Europeon type W.C. pan) with Integral P trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.CE..W.C. with S trap plain(Neycer/ Parry ware/ Cerra) |
| 111 | Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Neycer/ Parry ware/ Cerra) |
| 112 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C.580mm size Orissa pan(Hindware,Parryware) |
| 113 | Supplying all materials labour T&P and fitting & fixing UPVC SWR soil waste ventilating pipes and fittings of the following OD conforming to ISI No.13591/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC110mm dia UPVC SWR Pipe with rain water piping (.Ashirvad / Supreem / Oriplast / Hariplast) |
| 114 | 110mm dia U-PVC P. Trap |
| 115 | 110mm U-PVC S/J with Door |
| 116 | 110mm U-PVC door bend |
| 117 | 110mm dia U-PVC Plain bend |
| 118 | 110mm U-PVC Plain Tee |
| 119 | 110mm U-PVC Cowl |
| 120 | 125mm dia CP Grating |
| 121 | 75mm dia U-PVC SWR Pipe |
| 122 | 75mm dia U-PVC Plain Tee |
| 123 | 75mm U-PVC Door Bend |
| 124 | 75mm U-PVC Plain Bend |
| 125 | Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc .all compt. As per PH sp. And dir. Of EIC.550x400mm WHB-( Paryware/Nycer/ cerra ) |
| 126 | Pedestral 550x400mm WHB ( Paryware/Nycer/ cerra) |
| 127 | supplying all labour,T&P materials & fixing wash Kitcken Sink with C,I/MS. Brackets painted white including holes in walls and making good the damages etc.all complete as per P.H specification and direction of E.I.C. 510mmx404mmx200mm size600x450x200 mm stainless steel kitchen sink (Mousumi make) |
| 128 | Supplying all materials labour T&P and fixing standard size cp soap holder compt. With cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC Stainless steel with heavy good quality |
| 129 | Supplying all materials labour T&P and fitting and fixing 10 ltr capacity low level flushing cistern with a pair of cast iron or m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia cp foush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of EIC. 10ltr Capacity Cistern ( Paryware/Nycer/ cerra ) |
| 130 | Supplying all materials labour T&P and constructing gully trap chamber of the following inside size with 8cm thick RCC precast cover slab in cc (1:1.5:3) using 12mm size hg chips foundation concre3te(1:3:6) using 40mm size hg metal on bed and around trap FLY ASH Brick work in cm (1:6) in F&P and inside 12mm thick cp (1:3) finished with a floating coat of neat cement including fixing 100mm size HCI gully trap and grating etc. all complete as per approved drawing specification and dir of EIC.Inside size 250mmx250mm gully trap |
| 131 | Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, FLY ASH Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.Inside size : 760 x 760 x 460mm Inspection Chamber |
| 132 | Supplying all materials labour, T&P and constructing soak way pit of the following sizes with precast RCC rings joined loose gravel backing in the rear of well staining, precast RCC cover slab in c.c. (1:2:4) USING 2mm size hg chips fitted with iron lifting handles including e. w. in open well excavation in all kinds of soil and refilling the cavity around the pit and painting the iron works watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of EIC.1.22m dia x 2.10m deep |
| 133 | Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C. 20 mm dia C-PVC Pipe( Internal) |
| 134 | 25mm dia C-PVC Pipe |
| 135 | 32 mm dia C-PVC Pipe |
| 136 | Supplying all Materials labour T&P and fitting and fixing brass/CP Fittings of the following nominal bore with supply of all jointing materials etc. complete as per PH Specification and Direction of EIC. 15mm dia CP pillar cock |
| 137 | 20mm dia cp concealed stop cock |
| 138 | 15mm dia cp angle stop cock |
| 139 | 15mm dia cp bib cock S.B. |
| 140 | 15mm dia cp bib cock L.B. |
| 141 | 15mm dia CP Two way bib Cock |
| 142 | 15mm dia CP flange |
| 143 | 15mm dia CP Extension piece |
| 144 | 25mm dia Brass Ball Valve |
| 145 | 32mm dia Brass Ball Valve |
| 146 | Supplying all materials labour T&P and fixing water storage sintex tanks including and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting and placing the to the required position, including cost of tank conveyance and taxes of all materials to work site etc. all complete as per PH specification and direction of EIC. 1000 lit sintex tank |
| 147 | Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. SINKING OF TUBE WELL |
| 148 | Labour for drilling a perfectly bore holes as specified dia for a specified defth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per direction of engineer incharge including use of own rig with its accessories, tools and plants and consumables etc. for lowering of 125mm dia PVC/G.I./M.S. pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (PVC/G.I./M.S) casing pipes if required to prevent collapse of over borden is to be provided by the contractor including lowering and withdrawing after completion of the tube well. a) Labour for Drilling i) 0.00 mtr to 91.00 mtr & above |
| 149 | Lowering the following size of G.I./PVC housing pipe with or without slotted pipes as per necessity from ground level upto 30.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plants complete and keeping the top of casing pipe threading including plugging tube well to prevent entry of foreign materials from above (G.I./PVC) supplied by the contractor (including cost of casing pipe. a) Lowering of 125mm dia PVC casing pipe, i) From 0 mtr to 30.00m and above |
| 150 | b) Cost of 125mm dia PVC casing pipe (80 Sch) i) From 0 mtr to 30.00m and above |
| 151 | Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge as obtained from the tube well including supply of and use of all necessary equipments and labour as per the direction of engineer incharge. |
| 152 | Supplying of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 900-1000 ltr/hour and a head of 50-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of E.I.C. |
| 153 | Supplying and fitting and fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00HP single phase submersible pump including all cost, conveayance and taxes etc. all complete as per direction of EIC. |
| 154 | Supplying and fitting and fixing of three core flat cable (1.5mm2) of ISI make of reputed company like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of EIC. |
| 155 | Supplying and fitting and fixing jof plastic rope, MS well cover, MS clamp, stainless steel short piece, bend & socket including all cost, conveyance and taxes etc. all complete as per direction of EIC. |
| 156 | Supplying and fitting and fixing of HDPE pipes and pipe fittings with making connection to pump set including all cost, conveyance and taxes etc.all complete as per direction of EIC.25mm dia HDPE Pipe(Internal Pipe) Please Enable Macros to View BoQ information |
