Tender For Construction Of Rafting Complex And Way Side Amenities At Nadaun, District: Hamirpur(H.P) (Sh: Civil Works, Ws & Si, Ei, Hvac,Fire Fighting & Alarm System, Surveillance System And Drive In Cinema Etc.), Hamirpur-Himachal Pradesh

TDR : 55118743

Tender Notice
BOQ

19 Days Left

Hamirpur , Himachal Pradesh

Tender Brief : Tender For Construction Of Rafting Complex And Way Side Amenities At Nadaun, District: Hamirpur(H.P) (Sh: Civil Works, Ws & Si, Ei, Hvac,Fire Fighting & Alarm System, Surveillance System And Drive In Cinema Etc.)

Document Fees
₹ 5000 /-

EMD
₹ 63000000.0 /-

Tender Value
Refer document

Submission Date
08-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	A) RAFTING CUM WATER PARK COMPLEX AT NADAUN DISTT HAMIRPUR (H.P)Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge. Dumping site/disposal site shall be arranged by the contractor at its own cost and nothing shall be paid extra.
2	Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge. Dumping site/disposal site shall be arranged by the contractor at its own cost and nothing shall be paid extra.
3	Earth work in excavation by mechanical means (hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan including dressing of sides and ramming of bottoms upto all lifts including getting out the excavated soil and disposal including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge. Dumping site/disposal site shall be arranged by the contractor at its own cost and nothing shall be paid extra.
4	Filling available excavated earth ( Excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
5	Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto all lead also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
6	Surface in surface dressing of excavation not including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
7	Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.. All kinds of soil
8	Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. All kinds of soil
9	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
10	Providing and laying, mechanically mixed and vibrated cement concrete 1:4:8 (one cement:four sand eight graded crushed stone aggregate 40 mm (forty millimeter) nominal size) including curing as required at site complete excluding the cost of form work but including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
11	Plum concrete in retaining walls infront of hardstone and rest in cement concrete mix in 1:4:8 (1 cement:4 sand :8 aggregate 25mm nominal size with stone plums at regular intervals in including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
12	Providing from work with steel plates 3.15 mm (three decimal fifteen millimeter ) thick welded with angle iron in frame 30X30X5 mm (thirty into thirty into five millimeters )so as to give a fair finish including centering , shuttering ,strutting and propping etc. with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling & removal of same for in-situ reinforced concrete and plain concrete work in including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
13	Foundation ,footing basis of columns etc. And mass concrete as per direction of the Engineer-in-charge including carriage of material including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
14	Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
15	Flat surfaces, such as soffits of the suspended floors roofs , landing and the like floors etc. up to any thickness , all as per direction of the Engineer-in Charge including s carriage of material with in all leads ,lifts in all floor levels and other incidentals
16	Beams cantilever girders and lintels side and soffits of beams ,beams haunchings, cantilevers ,bressumers and lintels not exceeding 1 mtr in depth in all heights from floor as per direction of the Engineer-in Charge including carriage of material with in all leads ,lifts in all floor levels and other incidentals.
17	Columns, pillars ,posts and struts square, rectangular or polygonal in plan as per direction of the Engineer-in Charge Inculdings carriage of material with in all leads ,lifts in all floor levels and other incidentals
18	Stair case with sloping or stepped soffits excluding landing as per direction of the Engineer-in Charge Inculdings carriage of material with in all leads ,lifts in all floor levels and other incidentals
19	Form work in edges of slab and breaks in floor and walls under 20cm wide as per direction of the Engineer-in Charge Inculdings carriage of material with in all leads ,lifts in all floor levels and other incidentals
20	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level/above plinth level. including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge. - Thermomechanically treated bars of grade Fe-500D or more
21	Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability withoutimpairing strength and durability including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge. All Works upto plinth level
22	Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability withoutimpairing strength and durability including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge. All works above plinth level upto floor V level
23	Providing and laying weep hole in brick masonry / stone masonry / plain reinforced concrete in abutment,wing wall,retaining wall with 100 mm diameter PVC pipe extending through the full width of the structure with slope of 1:20 as drawing and technical specificationincluding all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
24	Stone boulder filling with well graded stone boulders under base/behind Retaining wallincluding all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
25	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
26	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:3 (1 cement : 3 coarse sand)including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
27	Extra for providing and placing in poition 2 Nos 6mm dia MS bars at every third course of half brick work .
28	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levelsincluding all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
29	Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
30	Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
31	Providing and fixing machine cut, mirror/ eggshell polished , Granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
32	Designing, fabricating, testing, installing and fixing in work gang saw cut (polished and machine cut) of position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
33	Providing and fixing bright finished stainless steel door latch with necessary screws etc. including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
34	Providing and fixing bright finished stainless steel 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
35	Providing and fixing bright finished stainless steel handles with screws etc. including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.125 mm
36	Providing and fixing bright finished stainless steel hanging type floor door stopper with necessary screws, etc. complete.
37	Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door with necessary accessories and screws etc. complete. including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
38	Providing and fixing factory made uPVC fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge. (Single / double glass panes and silicon sealant shall be paid separately).Note:-For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made
39	Providing and fixing factory made uPVC white colour casement/ Casement Cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainlzzess steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge including . Single / double glass panes and silicon sealent etc.For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door upto 2.50 sqm)
40	Structural steel work in single section, Supply and Erection of M.S. Insert Plates & Channels for support 10 to 20mm thick including drilling holes, nut bolts & rivets, fabrication including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge. etc.
41	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. : Hot finished welded type tubes including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
42	Steel work in built up sections/frame work including cutting hoisting, fixing in positioin and applying a priming coat of approved steel primer using structural steel etc as required In grating frames guard bar ladder , railinfg brackerts, gates and similar work including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
43	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge., (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
44	Providing and fixing stainless steel ( Grade 304) railing for physically disabled person made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as pe drawing/ approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered including fixing accessories such as nuts, bolts, Handles,fasteners etc.)including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
45	Providing and fixing 1 st quailty ceremic glazed tiles size 600x600 mm conforming to IS : 15622 having thickness 12 mm of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade completeincluding all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
46	Providing and laying KAJARIA Make or equivalent verified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.
47	Providing and laying KAJARIA Make or equivalent Double charged digital vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete - including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge. Size of Tile 600mm x 600mm
48	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge. size 600x600mm
49	Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge.Makrana white second quality
50	Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
51	Providing and fixing Unistone Make or equivalent Ist quality wall tiles conforming (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade including all leads and lifts of materials in foundation and plinth and as per direction of Engineer -in -charge
52	Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. including all leads and lifts as per direction of Engineer -in -chargePolished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
53	Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat:including all leads and lifts as per direction of Engineer -in -chargeWith common burnt clay F.P.S. (non modular) brick tiles of class designation 10 including all leads and lifts as per direction of Engineer -in -charge
54	Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet including all leads and lifts as per direction of Engineer -in -charge
55	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.including all leads and lifts as per direction of Engineer -in -charge110 mm diameter
56	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including all leads and lifts as per direction of Engineer -in -charge110x110x110mm Tee with Door
57	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including all leads and lifts as per direction of Engineer -in -charge110 mm bend
58	Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including all leads and lifts as per direction of Engineer -in -charge110 mm Shoe
59	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. including all leads and lifts as per direction of Engineer -in -charge110 mm
60	Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams including all leads and lifts as per direction of Engineer -in -charge.
61	Providing and laying uPVC 200mm dia perforated pipe as per ISI sepcifications including all leads and lifts as per direction of Engineer -in -charge
62	Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screwsof size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of
63	12.5 mm thick tapered edge gypsum moisture resistant board
64	15 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand) including all leads and lifts as per direction of Engineer -in -charge
65	6mm Cement Plaster of mix 1:3 (1Cement: 3 Fine sand) including all leads and lifts as per direction of Engineer -in -charge
66	Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including all leads and lifts as per direction of Engineer -in -charge
67	Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade including all leads and lifts as per direction of Engineer -in -chargeTwo or more coats on new work
68	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth including all leads and lifts as per direction of Engineer -in -charge
69	Providing nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) including all leads and lifts as per direction of Engineer -in -charge
70	Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
71	Dry stone pitching 22.5 cm thick including supply of stones and preparing surface including all leads and lifts as per direction of Engineer -in -charge
72	Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom including all leads and lifts as per direction of Engineer -in -charge.
73	Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer including all leads and lifts as per direction of Engineer -in -charge.
74	Providing Retro-reflective regulatory sign board of size 150x100mm rectangular made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x5 mm. The boards will be fixed to 1 No. 65x65 mm square post made of M.S. angle 65x65x5 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat including all leads and lifts as per direction of Engineer -in -charge.
75	Supplying and Fixing Acrylic Signage size (300x450mm) indicating Male/Female Wahrooms, Directional, FIre Exit, Rooms,Lifts,Classrooms etc of approved quality Door Mounted/Wall Mounted as per design and drawings complete as per direction and to the entire satisfaction including all leads and lifts as per direction of Engineer -in -charge.
76	Supplying, Fabricationg and Fixing of Acrylic Signage on featured wall including neon lights as per design and drawings complete as per direction and to the entire satisfaction including all leads and lifts as per direction of Engineer -in -charge.
77	Providing, fabricating and fixing of LED Signages made from acrylic 2 sheets+LED Strips and power supply with the message print out and stainless steel studs on the wall including cost of fixing complete complete as per direction and to the entire satisfaction including all leads and lifts as per direction of Engineer -in -charge.
78	Design, supply, fabrication and fixing of Signage board (20 ft. x 4 ft.- 1 no.) using words made of acrylic cut out letters with LED and reflective vinyl sheet as per approved design with following specification. a) Board shall be fabricated with 3 mm thick ACP sheets of Indobond or equivalent make. Powder coated Aluminium sheet shall be fixed from the rear side of the entire board to make box section. b) Rafting Complex Matter Logo letters (Hindi and English) shall be made of Acrylic cutout letters of ACAST or equivalent make and shall be uniformly illuminated by using Digital LED light of Samsung or equivalent make. c) Powder coated Aluminum clips and brackets shall be used of minimum 3 mm thickness including all leads and lifts as per direction of Engineer -in -charge. d) Words of other matter of the signage board shall be fixed using reflective vinyl cut out letters of MACTEC or equivalent make.
79	Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc.including all leads and lifts as per direction of Engineer -in -charge. and accordance with applicable specifications.
80	Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. including all leads and lifts as per direction of Engineer -in -charge. (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
81	Providing and fixing Granite pavers /cobbles as per drawing and design and specifications 100X 100 X 75mm Pattern 1 including carrriage of material upto all leads and lifts and as per direction of Engineer incharge.
82	Painting with duco paint(two or more coats) on steel work at all locations including rubbing/sand papring the matel surfaces complete in all respect excluding cost of primary coat but including the painting equpment such as spray guns or any other mechanical arrangments including all leads and lifts as per direction of Engineer -in -charge.
83	Design & Engineering of flood protection measures with the assistance from specialized agency and approval of the design by the employer after technical vetting by an engineering institute of repute choosen by the employer. The cost of the vetting shall be borne by the employer. The Contractor shall have to submitt the GFC drawings during construction.
84	Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12(D=100 mm with tolerance of ±2%), Zinic+10% Al alloy+PVC coated, Mesh wire diameter 2.7/3.7mm (ID/OD), mechanically edged/ selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(ID/OD), supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of 200 mm, as per drawing,including all leads and lifts as per direction of Engineer -in -charge.
85	Providing and laying of non-woven polypropylene geotextile (minimum 120 GSM) between pitching and embankment slope/ behind retaining wall,gabion wall, stone pitching or cement concrete blcoks including required overlaps, anchoring/fixing and surface preperation complete as per MoRTH Section 700 and clause 2504 including all leads and lifts as per direction of Engineer -in -charge.
86	Supply and fixing 0.60 width x1.20mtr length x1.80mtr high of white marble statue/idol of Maharishi Ved Vyas placed on platform proportionate to the statue, finished with White Marble Cladding complete in all respect as per direction and to the entire satisfaction including all leads and lifts as per direction of Engineer -in -charge.
87	Providing, execution and development of vertical garden over the existing walls including fabrication and installation of aluminium/fibre frame work for fixing the planted pots as per direction at details given in the drawings complete with provision of drip irrigation system, supplying and fixing of natural air purifier ornamental plants in the suitable size plastic/fibre pots (polypropylene) potted plants, including suitable organic potting mix and other required ingredients . One year maintenance is also included in the item as per direction and to the entire including all leads and lifts as per direction of Engineer -in -charge.
88	Providing decorative plants of appropreate sizes and then planting them at site after mixing of manure in duly dug area upto 45cm depth in specified or directed proportion including watering and removal of u/s material and i/c the cost of manure and carriage of material and plants within all leads and lifts and as per direction of Engineer-in-charge.
89	Providing and fixing water closet squatting pan Viterous china orrisa type W.C. pan of 580mm Make- JAL Cat No.65510-13 (Indian type W.C. pan ) or equivalent with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required - White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot restsincluding all leads and lifts as per direction of Engineer -in -charge.
90	Providing and fixing white vitreous china water closet (European type W.C. pan) JAL make Cat No. 65225-13 or equivalent with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat, jet and lid including all leads and lifts as per direction of Engineer -in -charge.
91	Providing and fixing Essco Jaquar Brass Jet Spray Nozzle (Chrome) with 1 Meter PVC Tube essco, Jaquar make or equivalent including all cost, conveyance and labour charges etc including all leads and lifts as per direction of Engineer -in -charge.
92	Providing and fixing counter top Viterous china flat back wash basin 630x450 mm Make- JAL Cat No. 66110-13 or equivalent including all leads and lifts as per direction of Engineer -in -charge.
93	Providing and fixing Bottle Trap Make- JAL Cat No. 1861S03 or equivalent 32 mm size of approved quality & make including all leads and lifts as per direction of Engineer -in -charge.
94	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. including all leads and lifts as per direction of Engineer -in -charge. Flexible pipe 40 mm dia.
95	Providing and fixing mirror of superior glass JAL make Cat No. 46551 or equivalent of approved quality and of required shape and size : Rectangular shape 450x600 mm including all leads and lifts as per direction of Engineer -in -charge.
96	Providing and fixing 600x120x5mm glass shelf with edges round off, supported on anodised aluminuim angle frame with CP brass brackets and guard rail complete fixed with 40mm long screws rwal plugs etc including all leads and lifts as per direction of Engineer -in -charge.
97	Providing and fixing toilet paper holder Make- JAL Cat No. 26546 or equivalent including all leads and lifts as per direction of Engineer -in -charge.C.P. brass
98	Providing and fixing of Liquid Soap Dispenser With Glass Tumbler JAL make Cat No. 37547 or equivalent brand with S.S. Screw including all leads and lifts as per direction of Engineer -in -charge.
99	Providing and fixing JAL make Cat No. 36524 or equivalent stainless steel towel ring with concealed fittings arrangement including all leads and lifts as per direction of Engineer -in -charge.
100	Providing and fixing stainless steel towel rail JAL make Cat No. 36520 or equivalent 600 mm long with arrangement of approved quality including all leads and lifts as per direction of Engineer -in -charge.
101	Providing and fixing C.P. Towel rack with lower hanger Jaguar make AKP-35781 PS or equivelent including all leads and lifts as per direction of Engineer -in -charge.
102	Providing and fixing Sensor Urinal (exposed) ‘Hebbal’ Post Flush Make- JAL Cat No.78315 or equivalant 15 mm having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification including all leads and lifts as per direction of Engineer -in -charge.
103	Providing and fixing Urinal Partitions, JSE-CHR-110UC450X, H: 900 W: 450 jaquar make or equivalent including all charges for cost, carriage,and labour for fixing and making the wall good including all leads and lifts as per direction of Engineer -in -charge.
104	Providing and fixing Unions 20mm including all leads and lifts as per direction of Engineer -in -charge
105	Providing and fixing Unions 25mm including all leads and lifts as per direction of Engineer -in -charge
106	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints ncluding all leads and lifts as per direction of Engineer -in -charge.. Concealed work, including cutting chases and making good the walls etc. :15 mm nominal outer dia Pipes
107	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints including all leads and lifts as per direction of Engineer -in -charge.. Concealed work, including cutting chases and making good the walls etc. :20 mm nominal outer dia Pipes
108	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints including all leads and lifts as per direction of Engineer -in -charge.. Concealed work, including cutting chases and making good the walls etc. :25 mm nominal outer dia Pipes
109	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etcincluding all leads and lifts as per direction of Engineer -in -charge.40mm dia nominal bore
110	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etcincluding all leads and lifts as per direction of Engineer -in -charge.50 mm dia nominal bore
111	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etcincluding all leads and lifts as per direction of Engineer -in -charge.65 mm dia nominal bore
112	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etcincluding all leads and lifts as per direction of Engineer -in -charge.80 mm dia nominal bore
113	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. including all leads and lifts as per direction of Engineer -in -charge 25 to 40 mm nominal bore
114	Providing and fixing C.P. brass Short body bib cock JAL make Cat No. 9032 or equivalent of approved quality conforming to IS standardsincluding all leads and lifts as per direction of Engineer -in -charge 15 mm nominal bore
115	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) including all leads and lifts as per direction of Engineer -in -charge25 mm nominal bore
116	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) including all leads and lifts as per direction of Engineer -in -charge40 mm nominal bore
117	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) including all leads and lifts as per direction of Engineer -in -charge50 mm nominal bore
118	Providing and fixing JAL make Cat No. 444 or equivalent uplasticised PVC connection pipe with brass unions including all leads and lifts as per direction of Engineer -in -charge- 20 mm nominal bore
119	Providing and fixing CI sluice valves / Fire hydrants & fixtures complete with bolts nut rubbers insertion etc ( the tail pieses if required will be paid seperately.) including all leads and lifts as per direction of Engineer -in -charge100 mm diameter.
120	Providing and fixing Therostatic Mixer No ARC 87681 K Aquanman Exposed part kit Thermostatic Shower Mixer with conceald body of Mixer No ALD -661 with spout No OHS -35495 over head shower 150x150 with Rubit cleaning system and shower arm dia 20mm x600mm long round shape 90deg. bend for wall mounted shower with flange No SHA-479L600 and spout no SPJ 81429 spout with wall flange I In wash rooms) or equivalent including all leads and lifts as per direction of Engineer -in -charge
121	Providing and fixing FAUCET RANGE OPP-15011BPM Single Lever Basin Mixer without Popup waste with 450mm Long Braided Hoses, jaquar make or equivalent in with all accessories including cutting and making good the walls wherever require including all cost, conveyance and labour charges etc including all leads and lifts as per direction of Engineer -in -charge
122	Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : including all leads and lifts as per direction of Engineer -in -chargeWith common burnt clay F.P.S.(non modular) bricks of class designation 7.5
123	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including all leads and lifts as per direction of Engineer -in -charge.
124	Providing and fixing C.P. brass long nose bib cock JAL make Cat No. 9036 or equivalent of approved quality conforming to IS standardsincluding all leads and lifts as per direction of Engineer -in -charge. - 15 mm nominal bore
125	Providing and fixing C.P. brass angle stop cock JAL make Cat No. 9048 or equivalent for basin mixer and geyser points of approved quality conforming to IS:8931including all leads and lifts as per direction of Engineer -in -charge. - 15mm nominal bore
126	Providing and fixing pillar tap JAL make Cat No. 77222 or equivalent with having water inlet, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
127	Providing and fixing grating JAL Make Cat No. 9336 or equivalent 100x100 mm nominal size including all leads and lifts as per direction of Engineer -in -charge.
128	Providing and fixing enclosed type water meter ( bulk Type) confirming to IS:2373 and testd by Municipal Board compete with bolts and nuts, rubber insertions etc. ( The tail piese if required to be paid seeperately.)including all leads and lifts as per direction of Engineer -in -charge.80mm dia nominal bore
129	Providing and fixing stainless steel soap Dish Holder JAL make Cat No. 26541 or equivalent with s.s screw including all leads and lifts as per direction of Engineer -in -charge.
130	Providing and fixing unplasticised PVC connetions pipe with PTMT collar and bush approved quality and colour,including all leads and lifts as per direction of Engineer -in -charge.15mm nominal bore upto 45 cm length
131	Making holes upto 20x20cm and embadding pipes upto 150mm diameter in masonry and filling with cement concrete 1:3:6 ( I cement: 3 Sand: 6 Graded stone aggregate 20mm nominal size ) Including disposal of malba
132	Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar including all leads and lifts as per direction of Engineer -in -charge.
133	Supplying and fixing C.I. cover without frame for manholes : 455x610 mmrectangular C.I. cover (heavy duty) the weight of the cover to be not less than 23kg including all leads and lifts as per direction of Engineer -in -charge.
134	Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc including all leads and lifts as per direction of Engineer -in -charge.For pipes 100 to 250 mm diameter
135	Providing and fixing 6 Kgf pvc Poly plast sewerage pipe of working pressure not less than 4.5 kg per square metre (Four point five kilogramme per square metre) including filling the joints with approved adhesive including all leads and lifts as per direction of Engineer -in -charge.75mm dia pipes
136	Providing and fixing 6 Kgf pvc Poly plast sewerage pipe of working pressure not less than 4.5 kg per square metre (Four point five kilogramme per square metre) including filling the joints with approved adhesive including all leads and lifts as per direction of Engineer -in -charge 110mm dia pipes
137	Providing and fixing high pressure PVC fitting & accessories, including fixing with approved adhesive etc. including all leads and lifts as per direction of Engineer -in -charge PVC plain Bend75 mm dia.
138	Providing and fixing high pressure PVC fitting & accessories, including fixing with approved adhesive etc. including all leads and lifts as per direction of Engineer -in -charge PVC plain Bend110 mm dia.
139	Providing and fixing high pressure PVC fitting & accessories, including fixing with approved adhesive etc. including all leads and lifts as per direction of Engineer -in -charge Single equal branch of required degree with oval access door insertion rubber wash 3mm75 mm dia.
140	Providing and fixing high pressure PVC fitting & accessories, including fixing with approved adhesive etc. including all leads and lifts as per direction of Engineer -in -charge Single equal branch of required degree with oval access door insertion rubber wash 3mm110 mm dia.
141	Providing and fixing high pressure PVC fitting & accessories, including fixing with approved adhesive etc. including all leads and lifts as per direction of Engineer -in -charge PVC COLLAR75 mm dia
142	Providing and fixing high pressure PVC fitting & accessories, including fixing with approved adhesive etc. including all leads and lifts as per direction of Engineer -in -charge PVC COLLAR110 mm dia
143	Providing and fixing high pressure PVC fitting & accessories, including fixing with approved adhesive etc. including all leads and lifts as per direction of Engineer -in -charge PVC Camps75 mm dia
144	Providing and fixing high pressure PVC fitting & accessories, including fixing with approved adhesive etc. including all leads and lifts as per direction of Engineer -in -charge PVC COLLAR110 mm dia
145	Providing and fixing high pressure PVC fitting & accessories, including fixing with approved adhesive etc. including all leads and lifts as per direction of Engineer -in -charge PVC Cowls 75 mm dia
146	Providing and fixing high pressure PVC fitting & accessories, including fixing with approved adhesive etc. including all leads and lifts as per direction of Engineer -in -charge PVC Cowls 110 mm dia
147	Providing and fixing high pressure PVC fitting & accessories, including fixing with approved adhesive etc. including all leads and lifts as per direction of Engineer -in -chargePVC Door Bend75 mm dia.
148	Providing and fixing high pressure PVC fitting & accessories, including fixing with approved adhesive etc. including all leads and lifts as per direction of Engineer -in -chargePVC Door Bend110 mm dia.
149	Providing and fixing high pressure PVC fitting & accessories, including fixing with approved adhesive etc. including all leads and lifts as per direction of Engineer -in -charge PVC Tee75 mm dia.
150	Providing and fixing high pressure PVC fitting & accessories, including fixing with approved adhesive etc. including all leads and lifts as per direction of Engineer -in -charge PVC Tee110 mm dia.
151	Providing and fixing PVC floor trap of self cleaning design with C.P screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors including all leads and lifts as per direction of Engineer -in -charge .75 mm Pvc floor trap
152	Providing and fixing PVC floor trap of self cleaning design with C.P screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors including all leads and lifts as per direction of Engineer -in -charge .110 mm Pvc floor trap
153	Providing and fixing in postion storage type automatic electric water heater pressure type thermostatically controlled, single phase wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel, Inner glass lining with B-Rating minimum 3 stars complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete i including all leads and lifts as per direction of Engineer -in -charge .Vertical type25 litre capacity water heater
154	Providing, fixing and commissioning hand drier with infra red controlled automatic on/off arrangement ( No Touch) including cutting and making good the walls complete with all necessary fittings to make it operational as required,of the following make and type:(or equal approved) including all leads and lifts as per direction of Engineer -in -charge .
155	Providing and fixing wall mounted auto aerosol dispenser with digital display fixed with brackets and rowl plug including all leads and lifts as per direction of Engineer -in -charge .
156	Supply, installation, testing & commissioning of 600 CFM Exhaust Fan in all respectincluding all leads and lifts as per direction of Engineer -in -charge .
157	Sky Walk including all structural components & cables- (design, engineering, supplying, installation, testing and commissioning)Providing, Fabrication and Erection of Sky walk as per drawing in structural steel work in vertical columns braced with the horizontal members , supporting the top floor of sky walk , with flooring and railing of 39 mm glass thickness, 3 layer sandwiched with centry PVB lamination ,of international standards as per drawing & designed duly vetted by the Design Engineer of (Indian Institute of Technology ). The job includes the cost of all type of steel work, Glass work , welding , reveting , Nuts and bolts and other fittings , fixtures, required in work I/c , painting with primer and duco paint in two or more coats including transportaion hoisting ( Hiring of Crane and scafolding work) as per the direction Engineer-in-Charge/Project Manager. ( The work of foundation/ pedestals and structural steel work will be measured and paid seperately under the head of Building work) Length 21.00 mtrx240 mtr width with railing 1.20mtr high all around .Providing/Fixing Glasswork 39 mm glass thickness, 3 layer sandwich with centry PVB lamination as per design and drawing in Skywalk complete as per drawing and design in all respect as per the direction and to the entire satisfaction of Engineer-in (Area 50.40Sqm)-Charge/Project Manager ( In Flooring)
158	Providing/Fixing Glasswork 39 mm glass thickness, 3 layer sandwich with centry PVB lamination as per the design and drawing in Skywalk with SS Railing of Approved Grades complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge/Project Manager( In Railing ) Area 52.08 Sqm including all leads and lifts as per direction of Engineer -in -charge .
159	Providing and fixing Stainless Steel door handle of size 1000mm long and 50 mm thick rod with SS screws etcincluding all leads and lifts as per direction of Engineer -in -charge .
160	Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, including all leads and lifts as per direction of Engineer -in -charge . (Door handle, lock and stopper etc.to be paid separately).
161	Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) including all leads and lifts as per direction of Engineer -in -charge .
162	Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqmlaying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.fourth and final layer of brick tiling with cement mortar (which will be paid for separately(For the purpose of measurement the entire treated surface will be measured including all leads and lifts as per direction of Engineer -in -charge .
163	Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment. including all leads and lifts as per direction of Engineer -in -charge .
164	Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.
165	Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing including all leads and lifts as per direction of Engineer -in -charge . With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles.
166	Centering and shuttering with 12mm thick shuttering plywood confirming toIS 4990:2011 and removal of form at all heights. Plywood will be supported onlock bars Suspended floors, roofs, landings, balconies and access platform. including all leads and lifts as per direction of Engineer -in -charge .
167	Providing and laying jointless 3-4mm thick epoxy flooring to achieve perfect 0-0 level without any undulations on existing granite / kota stone / Cement concrete flooring after surface prepration by grinding /rubbing and cleaning the base floor, followed by epoxy primer on prepared surface followed by epoxy screed on primed surface, followed by epoxy putty over screed and finally epoxy solution top of aproved brand and manufacture materials certified by Council of scientific and Industrial Rescaech , self smooth glossy finish , all as par manufacturer's specifications inclusive of necessary curring , finishing and carrying all related operations for proper completion of work.Make -MRF FOVROCK/ DR.FIXITE / CIPI or equivanent . Complete in all respect includeing approved colour as per direction and to the entire satisfaction of including all leads and lifts as per direction of Engineer -in -charge
168	Providing and fixing 20mm +/- 2mm thick single piece gang saw cut merror polished granite stone urinal divider/ partition of size 600mmX1500mm including all leads and lifts as per direction of Engineer -in -charge
169	Dismantling W.C. Pan of all sizes including disposal of dismantled materials including all leads and lifts as per direction of Engineer -in -charge
170	Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres leadcomplete including carriage of materials including all leads and lifts as per direction of Engineer -in -charge.For thickness of tiles 10 mm to 25 mm
171	Providing and laying bituminous macadm with hot mix plant using crushed aggregates of grading as per Table 500.4 primixed with biutuminous binder, transported to site upto a lead of 1000 mtr laid over a paareviously prepared surface with paver finisher to the required grade level and alignment and rolled to achieve the desirted compaction as per Technical Specifications clause No. 504 including all leads and lifts as per direction of Engineer -in -charge.
172	Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 including all leads and lifts as per direction of Engineer -in -charge.
173	Providing and fixing single \\"W\\" metal beam crash barrier comprising of cold formed W profiled section having thickness of 3 mm with frame width of 311 mm, depth 83 mm and length 4318 mm (made of ISI marked HR coils confirming to IS 5986/2011), to be fixed on cold formed channel section post of size 150x75x5 mm made from ISI marked HR coils confirming to IS : 5986/2011 spaced 2.00 metre centre to centre of the post which will be of total height of 1.8 metre with its height of 1.1 metre below ground level / road level, and 0.70 metre above ground level. Metal beam rail to be fixed on vertical post with spacer channel of cold formed channel section size 150 X 75 X 5 mm and 330 mm long (made of ISI marked HR coils confirming to IS : 5986/2011). All the above conponents shall conform to clause 810 of MORT&H specifications including all fittings required for errection on road side W- beams, posts, spacers shall not be hot dip galvanised with zinc coating of 550 gm/sqm. All the bolts, nuts & washers shall be hot dip galvanised to IS : 1367 pt- XIII/1983 (Reaffirmed 2011) for bolts and IS 14394/1996 (Reaffirmed 2011) for nuts. (Including height intesity grade all weather proof reflective sheeting multi colour tape fixed with mechanically means with heigh visibility (CAUTIONARY) from long distance) i.e. if fog porn area black spot and narrow curves etc. Including carriage of materials in all leads and lifts as per the direction of Engineer-in-charge.All the above conponents shall conform to clause 810 of MORT&H specifications including all fittings required for errection on road side W- beams, posts, spacers shall not be hot dip galvanised with zinc coating of 550 gm/sqm. All the bolts, nuts & washers shall be hot dip galvanised to IS : 1367 pt- XIII/1983 (Reaffirmed 2011) for bolts and IS 14394/1996 (Reaffirmed 2011) for nuts. (Including height intesity grade all weather proof reflective sheeting multi colour tape fixed with mechanically means with heigh visibility (CAUTIONARY) from long distance) i.e. if fog porn area black spot and narrow curves etc. Including carriage of materials in all leads and lifts as per the direction of Engineer-in-charge.
174	Waterfall fountain. Design, manufacture, supply, install and commissioning of 5m Ø circular fountain made of 6\\" size SS (304) pipe with 100 numbers of 3/4\\" x 1\\" nipple for nozzles and 2 numbers of 3\\" 2\\" nipples for water line wleded and polished. Required clamps and fasterers kit for insttallation is also included including all leads and lifts as per direction of Engineer -in -charge.
175	Water raiser pipes. Design, manufacture, supply, install and commissioning of 25m long wate raiser pipes made of 6\\" size SS (304) pipe. This pipe will carry water from the bottom to the top through both side of the truss given for the sky walk bridge. Required clamps and fasterers kit for insttallation is also included.
176	Nozzles. Design, manufacture, supply, install and commissioning of 3/4\\" angle adjustable nozzles made of SS 304.including all leads and lifts as per direction of Engineer -in -charge.
177	Pumps. Supply, install testing and commissioning of number of 2 numbers of submercible pumps 20 hp/ 3ph. Head:- 30m/ Discharge:- 1.5 lakh liter / Hr. (Make KSB/ Kirloskar or equivalent) .including all leads and lifts as per direction of Engineer -in -charge.
178	PumpChamber. Design,manufacture, supply, testing and commissioning of pump chambers made of SS 304 angles and SS 304 protection sheets with 8mm peforation.including all leads and lifts as per direction of Engineer -in -charge.
179	Manifold. Design, manufacture, supply, testing and commissioning of water supply manifold with contol valves and unions including all leads and lifts as per direction of Engineer -in -charge.
180	Online water filter Design, manufacture, supply, testing and commissioning of online water filter with screen filter and multi port control valves including all leads and lifts as per direction of Engineer -in -charge.
181	LED lights:-Supply, install, testing and commissioning of 150w RGB LED lights made with SS 304 body and DMX control pannel including all leads and lifts as per direction of Engineer -in -charge.
182	Sky Lights. Supply, install, testing and commissioning of 20R outdoor type sharpy lighs with 340w OSARAM light with climate control chamber including all leads and lifts as per direction of Engineer -in -charge.
183	Wall Washer:-Supply, install, testing and commissioning of 50w RGB LED wall washer lights made with SS 304 body and DMX control pannelincluding all leads and lifts as per direction of Engineer -in -charge.
184	Supply, install and commissioning Audio Speakers. JBL Speakers - Two-Way 5.25 inch (135mm) Coaxial Mushroom Garden Speaker or equivalent including all leads and lifts as per direction of Engineer -in -charge.
185	Supply, install and commissioning Audio Amplifier. Crown - Blue link with 600w per output channel or equivalent including all leads and lifts as per direction of Engineer -in -charge.
186	Supply, install and commissioning Audio Speakers Cables. 100m JBL Speaker - cables with Connector (1.5 Sq.mm Belden) (with HDPE pipes 100 m) or equivalent including all leads and lifts as per direction of Engineer -in -charge.
187	Supply, install and commissioning Electical Cables. 6 sq.mm 3 core underwauer cable 100m for pumps including all leads and lifts as per direction of Engineer -in -charge.
188	Supply, install and commissioning Electical Cables. 1.5 sq.mm 3 core underwauer cable 300 m for LED wall washer lightsincluding all leads and lifts as per direction of Engineer -in -charge.
189	Supply, install and commissioning Electical Cables. 2 sq.mm 3 core underwauer cable 300 m for 20R Shapy lights lightsincluding all leads and lifts as per direction of Engineer -in -charge.
190	Supply, install and commissioning Electical Cables. 1.5 sq.mm 4 core underwauer cable 300m for 150w LED down lights for the fountain including all leads and lifts as per direction of Engineer -in -charge.
191	Supply, install and commissioning Computer. i9 CPU @4.20Ghz x 8, GPU RTX 2080 Ti / SSE 2/ 64 GB/ 1TB/ 22\\" monitor or equivalent including all leads and lifts as per direction of Engineer -in -charge.
192	Supply, install and commissioning Show Contol Panel. Integrated show comtrol panel with touch screen wifi panel for fountain, light and audio perfomance. including all leads and lifts as per direction of Engineer -in -charge.
193	Supplying/installation of café table size 900x900 with with black MS/SS under structure and top duly pVC edge banded 18mm thick comercial ply/ 25mm thick at a borders of standard heigt only as per entire satisfaction of Engineer in Charge
194	Supplying/installation of café chair of standard size with plastic seat/back and SS Base as per entire satisfactionincluding all leads and lifts as per direction of Engineer -in -charge.
195	Supplying/installation of Writing Pad Chair for training classroom of standard size with plastic seat/back and SS Base as per entire including all leads and lifts as per direction of Engineer -in -charge.
196	Supplying/installation of personal locker unit per locker size 300mm w x 450mm d x 450mm h in powder coating finish as per entire including all leads and lifts as per direction of Engineer -in -charge.
197	Supplying/installation of PU Airport Reception/Waiting Chiars 3 Seater Size L 1900mm X 750mm height 780mm made of die casting aluminium alloy, seat using 2.00mm thick metal, beam 2.5mm thick tube, pu injection foam structure. All metal part must be anti rust treated and sprayed with static powder complete in all respect as per direction and to the entire including all leads and lifts as per direction of Engineer -in -charge.
198	Supplying/installation of PU Airport Reception/Waiting Chiars 2 Seater Size L 1280mm X 750mm height 780mm approximately made of die casting aluminium alloy, seat using 2.00mm thick metal, beam 2.5mm thick tube, pu injection foam structure. All metal part must be anti rust treated and sprayed with static powderincluding all leads and lifts as per direction of Engineer -in -charge.
199	Supplying/installation of PU Airport Reception/Waiting Chiars 1 Seater Size L 650mm X 750mm height 780mm approximately made of die casting aluminium alloy, seat using 2.00mm thick metal, beam 2.5mm thick tube, pu injection foam structure. All metal part must be anti rust treated and sprayed with static powder including all leads and lifts as per direction of Engineer -in -charge.
200	Providing and fixing PVC premium quality pair two wheel garbage bins blue and green for solid and liquid waste separately 120 litres capacity each of approved make duly approved by CIPT. The rate includes all carriage, cost of fixtures and fixing at site including all leads and lifts as per direction of Engineer -in -charge.
201	Commercial Kitchen Supplying, fixing, testing and commissioning of 3 burner gas range with 3 drawers of VIVA make or equivalent size 1800X600X850 +150 in the Kitchen at site of work complete as per direction and to the entire including all leads and lifts as per direction of Engineer -in -charge.
202	Supplying, fixing, testing and commissioning of Dosa Plate with puffer with 2 drawers of VIVA Make or equivalent 1050X750X966 in the Kitchen at site of work complete as per direction and to the entire including all leads and lifts as per direction of Engineer -in -charge.
203	Supplying, fixing, testing and commissioning of Work Table with 1 shelf with 2 drawers of VIVA Make or equivalent 1200X750X864 in the Kitchen at site of work complete as per direction and to the entire including all leads and lifts as per direction of Engineer -in -charge.
204	Supplying, fixing, testing and commissioning of Tandoor of VIVA Make or equivalent Size 750X750X965 in the Kitchen at site of work complete as per direction and to the entire including all leads and lifts as per direction of Engineer -in -charge. .
205	Supplying, fixing, testing and commissioning of Single Sink Unit of VIVA make or equivalent Size 600X750X750 in the Kitchen at site of work including all leads and lifts as per direction of Engineer -in -charge.
206	Supplying, fixing, testing and commissioning of Work Table with Shelf of VIVA make or equivalent Size 1200X750X750 in the Kitchen at site of work including all leads and lifts as per direction of Engineer -in -charge.
207	Supplying, fixing, testing and commissioning of Work Table with 4 drawers of VIVA make or equivalent Size 900X750X750 in the Kitchen at site of work including all leads and lifts as per direction of Engineer -in -charge. . .
208	Supplying, fixing, testing and commissioning of Work Table with SS Shelves of VIVA make or equivalent Size 1500X750X750 in the Kitchen at site of work including all leads and lifts as per direction of Engineer -in -charge.
209	Supplying, fixing, testing and commissioning of 3 Sink Unit of VIVA make or equivalent Size 1500X750X750 in the Kitchen at site of work including all leads and lifts as per direction of Engineer -in -charge.
210	Supplying, fixing, testing and commissioning of Overhead Unit Dish Rack of VIVA make or equivalent Size 1500X300X600 in the Kitchen at site of work including all leads and lifts as per direction of Engineer -in -charge.
211	Supplying, fixing, testing and commissioning of Soil Dish Table with Garbage of VIVA make or equivalent Size 1500X750X750 in the Kitchen at site of work including all leads and lifts as per direction of Engineer -in -charge.
212	Supplying, fixing, testing and commissioning of Buffing Dish Trolley of VIVA make or equivalent Size 600X900X750 in the Kitchen at site of work complete including all leads and lifts as per direction of Engineer -in -charge.
213	Supplying, fixing, testing and commissioning of SS Exhaust Hood of VIVA make or equivalent Size 5000X900X450 in the Kitchen at site of work including all leads and lifts as per direction of Engineer -in -charge.
214	Supplying, fixing, testing and commissioning of Onion & Potato bin of VIVA make or equivalent in the Kitchen at site of work including all leads and lifts as per direction of Engineer -in -charge.
215	Supplying, fixing, testing and commissioning of SS Wall Paneling (Wall Shelf) of VIVA make or equivalent Size 5000X600 in the Kitchen at site of work including all leads and lifts as per direction of Engineer -in -charge.
216	Supplying, fixing, testing and commissioning of Water Unit for 4 Cylinders of VIVA make or equivalent in the Kitchen at site of work including all leads and lifts as per direction of Engineer -in -charge.
217	Supplying, fixing, testing and commissioning of SS Hot and Cold Bain Marie 1950x430x525 of VIVA Make equivalent in the Kitchen at site of work including all leads and lifts as per direction of Engineer -in -charge.
218	Supplying, fixing, testing and commissioning of Water Unit for bottle filling of VIVA make or equivalent in the Kitchen at site of work complete as per direction and to the entire satisfaction of engineer in charge.
219	Providing & Fixing MS Gas Pipe along with emergency valve and brass coupling complete as pe direction and to the entire satisfaction of engineer in charge.
220	Providing & Fixing 24 guage MS Ducting for Ventilation with two fans including all leads and lifts as per direction of Engineer -in -charge.
221	Providing & Fixing grill for ventilation including all leads and lifts as per direction of Engineer -in -charge.
222	Aquarium- (Design, Engineering, Supply, Transportation, Installation, Testing & Commissioning )Two stes of Tunnel Aquarium - 180 degree Design, Manufacture, supply, installation and commissioning of 13.70m long x 5.25m wide curved shape tunnel aquarium made of 80 mm thick acrylic bended panels fixed on unique RCC structure with marine grade epoxy sealant. The RCC structure and the Acrylic panels are boned together for holding water in it. The quantity of 80 mm thick acrylic used for this acrylic must be superiorn quality, complete as per drawings at site of work including carriage in all leads and lifts as per direction and to the entire satisfaction of including all leads and lifts as per direction of Engineer -in -charge.
223	Tunnel Aquarium - 180 degree Design, Manufacture, supply, installation and commissioning of 20.25m long x 5.25m wide curved shape tunnel aquarium made of 80 mm thick acrylic bended panels fixed on unique RCC structure with marine grade epoxy sealant. The RCC structure and the Acrylic panels are boned together for holding water in it . The quantity of 80 mm thick acrylic used for this acrylic must be superiorn quality, completeas per drawings at site of work including carriage in all leads and lifts as per direction and to the entire satisfaction including all leads and lifts as per direction of Engineer -in -charge.
224	Cylinderical Aquarium . Design, Manufacture, supply, installation and commissioning of 5 .00metre dia.x 3.oo metre height cylinderical shaped aquarium made of 110 mm thick acrylic materials. This aquarium is to be placed on a unique RCC base structure with marine grade epoxy sealant. The RCC structure and the Acrylic panels are boned together for holding water in it . The quantity of 110 mm thick acrylic used for this acrylic must be superiorn quality, complete as per drawings at site of work including carriage in all leads and lifts as per direction and to the entire including all leads and lifts as per direction of Engineer -in -charge.
225	Decoration for Tunnel Aquarium tanks Design, Manufacture, supply, install and commissioning of artificial rock on the both behind wall of the tunnel aquarium with ferro cement and decorated with artificial corals at site of work including carriage in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge/ Project Manager, including labour.
226	Decoration for Cylindrical aquarium tank Design, Manufacture, supply, install and commissioning of artificial rock pillar in the middle of the cylindrical aquarium with ferro cement and decorated with artificial corals at site of work including carriage in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge/ Project Manager
227	Lightings Providing installation, testing and commissioning of Lightings, design mood LED lights and florescent lights to all the aquarium tanks. These lights are specially mounted above the aquarium tanks by using special clamps made of ss. Every tank will have separate switching controls for operations at site of work including carriage in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge/ Project Manager
228	Wave generators of make Sun Sun or the equivalent of required frequency. Design, supply, installation, testing and commissioning Wave generators are given to the tanks for agitation of water. Every tank will have these system as per the quantity of the holding water at site of work including carriage in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge/ Project Manager
229	Commissioning of Air Pumps for Aquarium of Sun Sun make or equivalent to the tanks for aeration of water as per required capacity. Every tank will have these system as per the quantity of the holding water at site of work including carriage in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge/ Project Manager
230	Water Treatment plant for Tunnel Aquariums Design, supply, installation, testing and commissioning Saltwater treatment plant compatible for processing a minimum quantity of 4 lakh litters/ hour capacity at site of work including carriage complete in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge/ Project Manager
231	Water Treatment plant for Cylindrical Aquarium Design, Manufacture, supply, installation and commissioning of saltwater treatment plant compatible for processing a minimum quantity of 20 thousand litters/ hour capacity at site of work including carriage in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge/ Project Manager
232	Electrical panel and cabling :-Supply, installation, testing and commissioning of Master Electrical Control Panel and Individual Electrical Panel for every aquarium displays based on the controls and activities required for each tank. All cables are given waterproof joints and enclosures for safety complete at site of work including carriage in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge/ Project Manager
233	Supply, installation testing and commissioning of total number of 12 numbers of pumps with a total of 90 hp is required for the handling of water, recycling, filling and darning. Make KSB or Kirloskar or equivalent complete at site of work including carriage in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge/ Project Manager
234	Plumbing: Supply, installation, testing and commissioning of all plumbing pipes, fittings size and strength as per design requirement for the aquarium size as per design r are made of UPVC. Make:- Supreme , Astral or equivalent completed at site of work including carriage in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge/ Project Manager
235	Fishes Sourcing and supplying of exotic fishes suitable for displaying in every tanks. This includes a set of sharks and stingrays for the tunnel aquarium to coral reef fishes. ( A minimum number of 1500 fishes are needed)at site of work including carriage in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge/ Project ManagerTunnel 1 Aquarium: Travaley, Bat fishes large variety, Groupers, snappersTunnel 2 Aquarium: Sharks, Sting raysTunnel 3 Aquarium: Angels fish (Large varie􀀗es), Blennies, Engineer gobbles, Stone fish, Parrot fish, Flat fish, Lion fish, Box fishCylindrical Tunnel Aquarium: Wrasse,clown fishes,trigger fish,tang,gobbles, blennies,mini angel fishes ,pipe fishes etc
236	Installation of Filteration System Design, Engineering, Supply, Transportation, Installation, Testing & Commissioning of water filteration system of 1 lac litre/hour capacity, no of working hours 8 to 10 hours with hourly flow rate 100 cum. The raw water passing throug an array of multimedia filters, filter media supported on gravel bed consisting of multiple layers of Anthractie, graded quartz sand, fine sand, super fine white sand and pabbles of progressively larger sizes with provision of back wash system with air and water to clean the filter media to make it free from dirt and suspended particle. The system comprises of1. Type : Horizontal Centrifugal PumpsQuantity : 3 Nos (2W+1S)Design Flow : 50 m3/hrHead : 25-30 mtrSolid Handling Capacity : 20 mmMOC : CI CasingShaft : EN - 8Impeller MOC : CIMotor : TEFC Motor suitable for 415 V, 3-Phase, 50 HzInsulation-Class F, IP 68/55 Protection 2. Multi Media FiltersQuantity : 2 Nos.M.O.C. : MSEPType : High Velocity down flowDiameter : 2500 mmHeight on straight : 1500 mmBed depth : 1000 mmMax. Pressure drop : 0.5 barFeed pressure : 3.0 barHydraulic test pressure : 6.0 barMedia : Graded filtering Sand, Anthracite and Garnet
237	HQ: 70,INDUSTRIAL AREA PH-I,PANCHKULA-134 113(HARYANA) INDIAPH:+91-172-2576222/333/444; FAX:+91-172-2585729E-mail:[email protected] Page #: 8 Project: Filtration System 2.02 Anthracite Color : BlackBulk Density : 0.8 gm/cc ApproxEffective Size : 0.85- 0.95 mmHardness : 3.0-3.8 ( Mohs scale)Caustic Solubility : < 1.0 %Acid Solubility : < 1.0 %
238	2.03 GarnetColor : Light Tan to Reddish PurpleType : AlmanditeCrystal System : CubicHardness : 7.0-7.5 ( Mohs scale)Bulk Density : 2.07 gm/cc ApproxEffective Size : 0.35 mm ApproxUniform Coefficient : 1.4 or lessAcid Solubility : MinimalFree Silica : MinimalSpecific Gravity : 3.8-4.2
239	2.04 AccessoriesFrontal Pipes and fittings including valves, Butterfly Valves, differential pressureswitch, inlet and outlet pressure gauge, sampling port, etc. Filters are alsoprovided with Air-Release and filter drain valves.
240	3. Air Blower (For Backwash of Filter)Quantity : 2 Nos (1W+1S)Type : Tri/Twin Lobe RotaryDuty Condition : 250 m3/hrMMWC : 3000MOC : CIAccessories : Coupled with MotorThe unit will include TEFC Motor, common base plate, v belt pulley, air filter,silencers, a pressure gauge, safety valve and a NRV at the discharge end.
241	4. Backwash PumpsType : Horizontal Centrifugal PumpsQuantity : 2 Nos (1W+1S)Design Flow : 100 m3/hrHead : 20-25 mtrSolid Handling Capacity : 20 mmMOC : CI CasingShaft : EN - 8Impeller MOC : CIMotor : TEFC Motor suitable for 415 V, 3-Phase, 50 HzInsulation-Class F, IP 68/55 Protection
242	5. Electrical and InstrumentationElectrical Control PanelMCC will be industrial type, floor or wall mounted, Non Draw Out type, Dustand vermin proof, complete with starters, main switches, bus bar, ammeter andvoltmeter, indicating lamps, push button etc. conforming to Indian ElectricityRulesPower CablesAll power cables shall be aluminium conductor PVC armoured cables of suitablesize. Power cables for use on 415 V shall be of 1100 Volts grade.Control CablesAll control cables shall be copper conductor ,PVC, armoured of suitable size.Control cables for use on 415 V system shall be of 1100 volts gradeCable LayingAll cables will be properly laid in cable conduits, suitable Galvanized and paintedcable conduits will be used.11.Earthing/Grounding
243	6. InstrumentationQty : 1 lot as per final design however the generaldescription of instruments is as hereunder.a) Pressure Gauges ( Discharge of all pumps, Feed and Outlet of each filter)Nominal size : 100 mmProcess connection : 1/4 & 1/2 NPTConnector position : lower mountAccuracy : 1.0% of FSVWindow : laminated safety glassPointer : standard pointerMaterial pressure element: Measuring System 304LCase filling fluid : Glycerine 99.7%Dial background : White
244	b) Flow Meter ( Feed Line)Type : Electro MagneticLine size : As per designOutput : Analog 4/20 mA , HARTReference accuracy : + 0.15% of Flow rateSensor : AISI Type 304Housing : Welded steelLiner Material : PTFE\suitableProcess temperature : -29 to +177o CAmbient Temperature : -34 to +65o CProcess connection Rating: Carbon Steel ASME Flanged
245	LIST OF MAKESElectrical Switch Gear : Siemens/ L&T/ ABB/ Alstom/C&S or equivalent.Pumps : Grundfos/Kirloskar/ABS/KSB/Darling/Kishore or equivalent.Motors : Siemens/Crompton/ABB/Kirloskar/Marathon or equivalent.Filter : SRPEPL/Aqueous or equivalent.Rotary Air Blowers : Everest/ Kay/ Swam/Usha or equivalent.MS Pipe : Jindal/ Tata/Swastik/ISI Marked or equivalent.Valves : BDK/Audco/Leader/ Sant/Zoloto/Saunders or equivalent.
246	All above components complete in all respect as per drawings & direction and to the entire satisfaction of Engineer-in Charge/Project Manager
247	Design, engineering, Providing fabrication, erection and fixing of Geodestic fitted with 31.52 mm thick clear DG laminated Glass without side ST 167 heat resistance glass. Consist the followings:- 12mm, 10mm, 8mm thick MS plates I beam trusses, 100mm x 100mm x 5mm thick MS hollow section, 16mm thick MS base plates, 20mm thick MS J bolts, Red oxide metal primer, Silicon sealants, Double adhesive tape, Transportation, Labor charges as per design and drawings complete in all respect as per direction and entire satisfaction of engineer-in-charge/Project Manager
248	Electrical WorkWiring for the following light points with 3x1.5 Sq.mm FRLS PVC insulated stranded copper conductor wires in concealed FRLS PVC conduit in F.ceiling/walls/ceiling as directed including providing and fixing of 6 amps flush type switches, 5 sided G.I. Boxes for housing switc hes and earthing complete as required.Rates are inclusive of 3 x 1.5 sq mm FRLS PVC insulated stranded copper conductor wires for circuit First point controlled by one no. 6 amp. switch including carriage in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.
249	Wiring for the following light points with 3x1.5 Sq.mm FRLS PVC insulated stranded copper conductor wires in concealed FRLS PVC conduit in F.ceiling/walls/ceiling as directed including providing and fixing of 6 amps flush type switches, 5 sided G.I. Boxes for housing switc hes and earthing complete as required.Rates are inclusive of 3 x 1.5 sq mm FRLS PVC insulated stranded copper conductor wires for circuit 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire including carriage in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
250	Wiring for the following light points with 1.5 Sq.mm FRLS PVC insulated stranded copper conductor wires in concealed FRLS PVC conduit in F.ceiling/walls/ceiling as directed including providing and fixing of 6 amps flush type switches, 5 sided G.I. Boxes for housing switches and earthing complete as required. Rates are inclusive of 3x 1.5 sq mm FRLS PVC insulated stranded copper conductor wires for circuit Extra Loop light pointWiring for the following light points controlled by MCB in DB (Cost of MCB has been taken elsewhere in the tender) with 3x 1.5 sq. mm FRLS PVC insulated copper conductor wires in concealed/exposed FRLS PVC conduit as called for and earthing.All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
251	Wiring for the following light points with 1.5 Sq.mm FRLS PVC insulated stranded copper conductor wires in concealed FRLS PVC conduit in F.ceiling/walls/ceiling as directed including providing and fixing of 6 amps flush type switches, 5 sided G.I. Boxes for housing switches and earthing complete as required. Rates are inclusive of 3x 1.5 sq mm FRLS PVC insulated stranded copper conductor wires for circuit Additional light points in the same circuit Wiring for the following light points controlled by MCB in DB (Cost of MCB has been taken elsewhere in the tender) with 3x 1.5 sq. mm FRLS PVC insulated copper conductor wires in concealed/exposed FRLS PVC conduit as called for and earthing.All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
252	Wiring for 6/16 amps light plug outlets with 3 x 2.5 sq.mm FRLS PVC insulated copper conductor wires in FRLS PVC conduit in ceiling/walls/floor as directed including providing 6/16 amps flush type 3 pin socket and 16 amps switch with cover plate, 5 sided G.I. boxes for housing switches, sockets and earthing complete as required. (for general areas)All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
253	Wiring for inline fan points with 2 x 2.5 sq.mm FRLS PVC insulated stranded copper conductor wires in concealed FRLS PVC conduit in F.ceiling/ walls/ Ceiling as directed including providing providing and fixing of 16 amps flush type switches 16 amps 3 pin socket near inline fan, 5 sided G.I. boxes for housing switches and 16 amps 3 pin socket outlet and earthing and complete as required.(including body earth for GI boxes)All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
254	Wiring for the Ceiling fan points with 1.5 Sq.mm FRLS PVC insulated stranded copper conductor wires in concealed/exposed FRLS PVC conduit in ceiling / walls as directed including providing Hexagonal fan Box , Electronic fan regulator, 6 amp switch, 5 sided G.I. Boxes, for housing the regulator and earthing complete as required.All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
255	Wiring for Geyser points with 3 x 4 sq mm FRLS PVC insulated copper conductor wires in concealed FRLS PVC conduit in F.ceiling/ walls/ Ceiling as directed including providing 16 amps flush type switch near the white board and 6/16 amps 6 pin socket near the projector in ceiling , 5 sided G.I. boxes for housing switches and 6/16 A 6 pin socket outlet , earthing and complete as required.(including body earth for GI boxes) ( 1 point per circuit)All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
256	Wiring for VRV Indoor units with 3 x 2.5 sq.mm FRLS PVC insulated stranded copper conductor wires in concealed FRLS PVC conduit in F.ceiling/ walls/ Ceiling as directed including providing providing and fixing of 6 amps flush type switches 16 amps 3 pin socket near VRV points, 5 sided G.I. boxes for housing switches and 16 amps 3 pin socket outlet and earthing and complete as required.(including body earth for GI boxes) ( 4 to6 points per circuits) All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
257	Wiring for 16 amps power outlet points with 4.0 sq.mm FRLS PVC insulated stranded copper conductor wires in concealed/recessed FRLS PVC conduit as directed including providing providing and fixing of 16 amps flush type switch and 6 pin socket with cover plate 5 sided G.I. boxes for switches and socket and earthing the third pin with 4.0 sq mm FRLS PVC PVC stranded copper wire complete as required (including body earth for GI boxes).One 16 Amps point per circuit 4 X 4 sq. mm + 2 X 4 sq. mm earth wireAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
258	Wiring for 16 amps power outlet points with 4.0 sq.mm FRLS PVC insulated stranded copper conductor wires in concealed/recessed FRLS PVC conduit as directed including providing providing and fixing of 16 amps flush type switch and 6 pin socket with cover plate 5 sided G.I. boxes for switches and socket and earthing the third pin with 4.0 sq mm FRLS PVC PVC stranded copper wire complete as required (including body earth for GI boxes).2nos 16 Amps point per circuit 4 X 4 sq. mm + 2 X 4 sq. mm earth wireAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
259	Wiring for UPS/Raw plug outlets points with three core, 2.5 sqmm FRLS PVC Insulated and PVC sheathed flexible cable with bright annealed electrolytic copper conductor , 1100 volt grade confirming to IS : 694-1990 with latest amendments, in existing Channels/ conduit in ceiling/walls/floor including all cable termination accessories) Earthing of GI Box to be included. Colour Coding to be followed . For Worksation UPS and Raw power wiring All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
260	Wiring for UPS/Raw plug outlets points with three core, 4 sqmm FRLS PVC Insulated and PVC sheathed flexible cable with bright annealed electrolytic copper conductor , 1100 volt grade confirming to IS : 694-1990 with latest amendments, in existing Channels/ conduit in ceiling/walls/floor including all cable termination accessories) Earthing of GI Box to be included. Colour Coding to be followed . For Worksation UPS and Raw power wiring All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
261	Providing and fixing of 1 Nos.6 amp flush type 3 pin socket and 1 No. 6 amps switch cover plate, 5 sided G.I. Boxes for housing switches and sockets and earthing complete as required (for Raw/ UPS). GI Box to have earth pin for body earthingAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
262	Providing and fixing of 2 Nos.6 amp flush type 3 pin socket and 1 No. 16 amps switch cover plate, 5 sided G.I. Boxes for housing switches and sockets and earthing complete as required (for Raw/UPS). GI Box to have earth pin for body earthingAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
263	Providing and fixing of 1 No.16 amps flush type 6 pin socket and 1 No. 16 amps switch with indicator, cover plate, 5 sided G.I. Boxes for housing switches and sockets and earthing complete as required (for UPS & Raw) GI Boxes to have earth pin for body earthingAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
264	Providing and fixing in position the following FRLS PVC conduits including all accessories concealed in F. ceiling/wall/floor as required including 1.6 mm thick PVC junction or pull boxes with 3mm thick perspex sheet cover plate complte with 1.6 mm dia. G.I. pull wires in the length of conduit. 25 mm dia conduit (1.6 mm thick) with accessories All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
265	Providing and fixing in position the following FRLS PVC conduits including all accessories concealed in F. ceiling/wall/floor as required including 1.6 mm thick PVC junction or pull boxes with 3mm thick perspex sheet cover plate complte with 1.6 mm dia. G.I. pull wires in the length of conduit. 32 mm dia conduit (2.0 mm thick). All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager.
266	Provide sufficient temporary lighting for working in the Building total area 40000 sq. ft. divided in 6 Floors and maintain the same till completion of the project.It shall include replacement of all fused/faulty lamps.It shall include providing 4 Sets of Portable power distribution boards with 4 nos 16/32 A single phase plug sockets and 1 nos 32 Amps 3 phase plug socket (industrial type with ON/OFF MCB) Provide suitable size of MCB distribution board with 100 mA RCCB . The Contractors will tap off supply from these plugs for his use. Hologen in the open area and Tubelights provision in the closed room to maintain a lighting level of 150 lux on the floor, 32 mm dia conduit (2.0 mm thick)And other items recuired including labour. Each 15 A socket and each Light circuit shall be protected by suitable MCBs.Use three core PVC Insulated PVC sheathed copper conductor cables for wiring.The contractor shall salvage the complete wiring and take it back at the end of the project. All the entry/temporary toilets/ path ways ,staircases, vendor store area, material stacking place to be provided with adequate lighting with 4feet Patti fitting on the equal distanceAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
267	Providing and fixing in position the following FRLS conduits including all accessories concealed in F. ceiling/wall/floor as required including 1.6 mm thick PVC junction or pull boxes with 3mm thick perspex sheet cover plate complte with 1.6 mm dia. G.I. pull wires in the length of conduit. 25 mm dia conduit ( 1.6 mm wall thickness) including carriage in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge
268	Providing and fixing in position the following FRLS conduits including all accessories concealed in F. ceiling/wall/floor as required including 1.6 mm thick PVC junction or pull boxes with 3mm thick perspex sheet cover plate complte with 1.6 mm dia. G.I. pull wires in the length of conduit. 32 mm dia conduit ( 1.6 mm wall thicknes including carriage in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge
269	Providing and fixing in position suitable 1.2 mm thick G.I./ PVC outlet box for RJ- 45 computer outlet with all fixing accessories as required. All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
270	Supply and fixing of 1.2 mm thick G.I Box along with RG 11 TV Co axial socket with Cover Plate All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
271	Supply drawing connecting testing and commissioning of TV Coaxial cable RG 6 in existing conduit All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
272	Providing ,installation ,testing and commissioning of Main L.T. Panel Cum Capacitor Panel - as described in the specifications complete as per drawingsAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
273	Providing and fixing in position the following copper strips and wires including providing all fixing accessories and effecting proper connections G.I. tape 32 mm x 6 mm All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
274	Providing and fixing in position the following copper strips and wires including providing all fixing accessories and effecting proper connections G.I. tape 25 mm x 6 mm in main L.T panel Cum Capacitor.All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
275	Providing and fixing in position the following copper strips and wires including providing all fixing accessories and effecting proper connections copper tape 50mm x 6mm
276	Providing and fixing in position the following copper strips and wires including providing all fixing accessories and effecting proper connections GI wire 8 SWGAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
277	Supply, Installation, testing and commissioning of G.I. Maintenance Free Earthing of make Electrolytic Earthing comprising of type GI 2.4 mm wall thickness, hollow tube 10 feet long, 2.125 inches outer diameter completely filled with non hazardous metallic salts (Terrafill) to achieve an earth resistance of less than 1 ohms. Provide masonry chamber with concrete base, CI manhole cover (cover to be heavy duty) with frame (300mm x 300mm) and make earth pit sign/ identifcation no in each earth station for Body earthing All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
278	Supply, Installation, testing and commissioning of Copper Maintenance Free Earthing of make Electrolytic Earthing comprising of type copper 2.4 mm wall thickness, hollow tube 10 feet long, 2.125 inches outer diameter completely filled with non hazardous metallic salts (Terrafill) to achieve an earth resistance of less than 1 ohms. Provide masonry chamber with concrete base, CI manhole cover (cover to be heavy duty) with frame (300mm x 300mm) and make earth pit sign/ identifcation no in each earth station All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
279	Supplying and laying of the following sizes of Heavy duty PVC Pipes below paved area including chase cutting and back filling. For earthing cables and Fiber cables 240 mm outer dia cost and carriage of pipeAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
280	Supply, Installation, Testing & Commissioning of Double pole Structure from 11 /7.5 Mtr. Steel Tubular Poles with transformermounting Structure and Fuses disc Insulators,GOD Switch & required qty of Aluminium Conductor, M.S Angles & M.S Channels etc complete work. For INSIDE THE BUILDINGAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
281	Supply, Installation Testing & commissiong of 400 KVA 11/0.415 KV, ON Load Type Copper Wounded Transformer with OLTC,RTCC &AVR with spec (Losses as per IS 1180 Level-2)All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
282	Supply and making outdoor/indoor 11 KV VCB panel end terminations heat shrinkable type complete with lugs, glands, push on tubes, earth strip etc. including all accessories. (Raychem make)All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
283	Supply and making outdoor/indoor 11 KV cable end terminations heat shrinkable type complete with lugs, glands, push on tubes, earth strip etc. including all accessories. (Raychem make)3 c x 185 sq.mm 11 KV XLPE Cable termination (Indoor Type) All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
284	Supplying, Laying, testing and commissioning of following sizes of 1.1 KV XLPE insulated, Aluminium conductor armoured cables 3 c x 185 sq.mm 11 KV XLPE Cable termination (Outdoor Type)All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
285	Supplying, Laying, testing and commissioning of following sizes of 1.1 KV XLPE insulated, Aluminium conductor armoured cables 3 C x 185 sq.mm 11 Cable KV XLPE AL.AR.CableAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
286	Supply & fixing in position fire buckets (3 Nos.) duly filled with dry fine sand & fixed on Angle iron frame as required. The fire buckets shall be painted Red from outside & white from inside, one handle at the bottom to hold completeAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
287	Supply & fixing in position the best quality danger notice boards of approved shape & size as reqd. by the local Electrical Inspecting Authority written in English, Hindi & local language. ( for 440 Volt & 11000 Volt) All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
288	Design, fabrication, supplying to site of installation, preparing foundations, installing in position, testing and commissioning of 6.0 M height above ground level Octagonal double arm G.I. Poles, 150 mm dia bottom and 75 mm dia at top level with 3 mm thick complte with Base plate as required. suitable for 2 x 150 W Light Fixture. The cost shall also include junction box, wiring from the Junction Box to the luminaire with 2 x 2.5 sq.mm PVC Insulated copper conductor stranded wires of 1100 V grade and one run of 14 SWG bare copper earth wire. All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
289	Design, fabrication, supplying to site of installation, preparing foundations, installing in position, testing and commissioning of 3.2 M height above ground level M.S. Tubular steel poles ( 89.0 mm dia 4.85 mm thick) suitable for Decorative outdoor light fixture. The cost shall also include junction box, wiring from the Junction Box to the luminaire with 2 x 2.5 sq.mm PVC Insulated copper conductor stranded wires of 1100 V grade and one run of 14 SWG bare copper earth wire. All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
290	Supplying to site of installation, preparing foundations suitable length of 50 mm dia G.I. Pipe with coupler, installing in position, testing and commissioning of Gate Light Fixture as per Philips Cat No.SPC 101/70 (E) HPF with 70 W lamps or equivalent. All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
291	Providing and fixing in position the following size of medium class G.I. pipes for drawing underground cables etc. complete with Bends, collars etc. 2mm thick 40mm dia G.I. Pipe 2mm thick 40mm dia G.I. PipeAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
292	Supply & Installation, preparing foundations, installing in position, testing and commissioning of following external light fixture,lamps and control gear boxes complete with wall bracket all fixing accessories as required 60 watts LED light fixture complete with all accessories and Control Gear Box as required.60 watts LED light fixture complete with all accessories and Control Gear Box as required.All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
293	Supply & Installation, preparing foundations, installing in position, testing and commissioning of following external light fixture,lamps and control gear boxes complete with wall bracket all fixing accessories as required .40 watts LED amp light fixture complete with all accessories and Control Gear Box as required. Basic cost Rs -5000/All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
294	Supply & Installation, preparing foundations, installing in position, testing and commissioning of following external light fixture,lamps and control gear boxes complete with wall bracket all fixing accessories as required Bollard light fixture (Outdoor Type) 1 x 12 watts LED Wipro Cat no-FBP 32118 light fixture or equivalent complete with all accessories and Control Gear Box as required.All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
295	Supplying, laying, effecting proper connections, testing & commissioning of the following sizes of 1100 Volts Grade armoured /unarmoured PVC insulated PVC sheathed armoured aluminium/copper conductor cables conforming to IS : 1554 Part I - 1976 with latest amendments laid 1100 volts grade PVC insulated Aluminium Conductor, Armoured PVC served cables and lay in ground including digging of soil and refilling the same trench, including providing bricks & sand, 3 x 6 sq.mm armoured copper conductor cableAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
296	Supplying, laying, effecting proper connections, testing & commissioning of the following sizes of 1100 Volts Grade armoured /unarmoured PVC insulated PVC sheathed armoured aluminium/copper conductor cables conforming to IS : 1554 Part I - 1976 with latest amendments laid 1100 volts grade PVC insulated Aluminium Conductor, Armoured PVC served cables and lay in ground including digging of soil and refilling the same trench, including providing bricks & sand, 3 x 4 sq.mm armoured copper conductor cableAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
297	Supplying and making terminal joints for the following size of 1100 Volts Grade PVC insulated copper conductor armoured cables including providing heavy duty copper terminal crimping lugs, solder, insulation tape, approved sealing epoxy compound, double compression brass cable glands, effecting gland connections and effecting terminal connections to the equipment complete as required.3 x 6 sq.mm armoured copper conductor cable jointsAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
298	Supplying and making terminal joints for the following size of 1100 Volts Grade PVC insulated copper conductor armoured cables including providing heavy duty copper terminal crimping lugs, solder, insulation tape, approved sealing epoxy compound, double compression brass cable glands, effecting gland connections and effecting terminal connections to the equipment complete as required.3 x 4 sq.mm armoured copper conductor cable JointsAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
299	Earthing with G.I. earth pipe 4.5 mm long x 40 mm dia. Including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but withcharcoal or coke and salt) complete as required.40 mm dia. G.I. pipe (medium class)All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
300	G.I. Earth pipe Electrode G.I wire 8 SWG Bare for Pole earthingsAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
301	Design, engineering, Supply, Installing testing and commissioning of Main Street Light Distribution Board comprising of the following :Street Light DB out door type as described above completePanel should be Outdoor Type-IP-541 no 100 A TPN MCCB(35 KA) as incomer 1 no 110 A TP Contactor (230 V coil)1 no selector switch to select automatic or manual operation1 set of ON/OFF push buttons for manual operation1 no L & T timer TSQ -ST (daily dial - 1x 24 Hours) 15 nos.16 A DP MCB (10 KA) as outgoings200 A TPN Copper busbar.All interconnections and wiring as required for automatic ON and OFF operation of the SLDB. 2 mm thick M.S. sheet metal Cubicle Board as per specifications mentioned elsewhere in the document complete, including earthing as required.All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
302	Supply, Installing testing and commissioning of LIGHTNING PROTECTION (Conventional System)Fixing clamp for (500 to 1500 mm) air terminal , All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
303	Supply, Installing testing and commissioning of LIGHTNING PROTECTION (Conventional System)Air Terminal 1.5 mtr. side wall ,All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
304	Supply, Installing testing and commissioning of LIGHTNING PROTECTION (Conventional System)Side Wall Clamp for 1.5 mtr. air terminalAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
305	Supply, Installing testing and commissioning of LIGHTNING PROTECTION (Conventional System)Clamp for connecting air terminal rod to 8mm Conductor, All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
306	Supply, Installing testing and commissioning of LIGHTNING PROTECTION (Conventional System)Universal Clamp, All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
307	Supply, Installing testing and commissioning of LIGHTNING PROTECTION (Conventional System)Al Round Conductor on roof (Ø 8mm), Lightning finial, 25 mm dia X 300 mm long, G.I.All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
308	Supply, Installing testing and commissioning of LIGHTNING PROTECTION (Conventional System)Al Round Conductor Holder for wall with accessories wall plug and screwsAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
309	Supply, Installing testing and commissioning of LIGHTNING PROTECTION (Conventional System)Al Round Conductor Holder for Flat Roof, All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
310	Supply, Installing testing and commissioning of LIGHTNING PROTECTION (Conventional System)Connecting Sleeve (every 20 mtr.) , All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
311	Supply, Installing testing and commissioning of LIGHTNING PROTECTION (Conventional System)Al Down Conductor (Ø 8mm), All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
312	Supply, Installing testing and commissioning of LIGHTNING PROTECTION (Conventional System)Al Down Conductor Holder for wall with accessories wall plug & screw, All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
313	Supply, Installing testing and commissioning of LIGHTNING PROTECTION (Conventional System)Connecting Sleeve (every 20 mtr.) , All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
314	Supply, Installing testing and commissioning of LIGHTNING PROTECTION (Conventional System)Test Clamp, All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
315	Supply, Installing testing and commissioning of GI strip for down conductor to earth for LIGHTNING PROTECTION (Conventional System)All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
316	Supply, Installing testing and commissioning of GI Strip holder (25x6 mm)LIGHTNING PROTECTION (Conventional System)All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
317	Supply, Installing testing and commissioning of 17.2 mm Copper bonded UL listed rod of 3 mtr length LIGHTNING PROTECTION (Conventional System)All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
318	Supply, Installing testing and commissioning of Environment friendly, RoHS certified, low resistivity Ground Enhancement material in 22.6 Kg pack to fill the bore area around the rod.LIGHTNING PROTECTION (Conventional System)All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
319	Supply, Installing testing and commissioning of St 316 grade clamp to terminate the load on earth electrode LIGHTNING PROTECTION (Conventional System)All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
320	Supply, Installing testing and commissioning of Poly Plastic Pit Cover LIGHTNING PROTECTION (Conventional System)All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
321	SITC of 4m Ornamental MS Pole with Cast aluminum embelishment Post top Pole \\"Paula \\" duly primer coated & Polyester / Polyurethane painted. (Without light fixture)or equivalentAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
322	SITC of Decorative 40 W Post type type luminaire \\" FELIS_S \\" made of aluminum housing duly powder coated / PU painted with Poly carbonate Clear /Frosted diffuser .All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
323	SITC of 8.0m Ornamental Cast aluminum Post top Pole \\"Paula \\" duly primer coated & Polyester / Polyurethane painted and Single arm Bracket to mount one Street light pole .(Without light fixture) The Net height of pole along with bracket shall be 8m .All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
324	SITC of 50W-60W highly efficient IP66 LED streetlight with aluminium pressure die cast housing toughened glass in the front and peanut lens for batwing light distribution ,higher spacing between Pole distribution to ensure uniform lightAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
325	SITC of Ornamental Smart Pole Post top Pole duly primer coated & Polyester / Polyurethane painted . The pole shall be equiped with of 1 Post top light ,2 Camera , 2 Speaker ,1Wifi ,1 USB and 1 SOS The net height of pole along with height of Fixture shall be 4 m .All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
326	Supplying, installing ,connecting testing and commissioning of the following double door 1/4 rows vertical type 1.4 mm thick and 1. 2 thick door sheet steel enclosed fully recessed type, TPN Miniature Circuit Breakers Distribution Boards dust proof, vermin proof, with hinged and lockable doors complete with DP MCB's and inter-connection with copper wire , insulated copper bus bar , cable glands/conduit entry bushes, bonding to earth and painting. Also provide separate neutral busbar for each phase. Provide separate Earth Links for each phase. Use brass thimbles for connections of all wires. 1 row for single phase and 4 rows for 3 phase. Provide separate 4 way 63 A main neutral link also. The phase busbar links shall be factory pre insulated.8 Way TPN DB, each phase consisting of 6 Nos. 10/20 AMP SP MCB’s and controlled by one number 100 mA sensitivity 40 AMPS DP RCCB backed up with 1 no 40 Amps 4 pole MCB.All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
327	Supply,inginstalling ,connecting testing and commissioning of the following double door 1/4 rows vertical type 1.4 mm thick and 1. 2 thick door sheet steel enclosed fully recessed type, TPN Miniature Circuit Breakers Distribution Boards dust proof, vermin proof, with hinged and lockable doors complete with DP MCB's and inter-connection with copper wire , insulated copper bus bar , cable glands/conduit entry bushes, bonding to earth and painting. Also provide separate neutral busbar for each phase. Provide separate Earth Links for each phase. Use brass thimbles for connections of all wires. 1 row for single phase and 4 rows for 3 phase. Provide separate 4 way 63 A main neutral link also. The phase busbar links shall be factory pre insulated.10 Way TPN DB, each phase consisting of 8 Nos. 10/20 AMP SP MCB’s and controlled by one number 100 mA sensitivity 63 AMPS DP RCCB backed up with 1 no 63 Amps 4 pole MCB. (L&P DB)All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
328	Supplying, installing ,connecting testing and commissioning of the following double door 1/4 rows vertical type 1.4 mm thick and 1. 2 thick door sheet steel enclosed fully recessed type, TPN Miniature Circuit Breakers Distribution Boards dust proof, vermin proof, with hinged and lockable doors complete with DP MCB's and inter-connection with copper wire , insulated copper bus bar , cable glands/conduit entry bushes, bonding to earth and painting. Also provide separate neutral busbar for each phase. Provide separate Earth Links for each phase. Use brass thimbles for connections of all wires. 1 row for single phase and 4 rows for 3 phase. Provide separate 4 way 63 A main neutral link also. The phase busbar links shall be factory pre insulated.12 Way TPN DB, each phase consisting of 10 Nos. 10/20 AMP SP MCB’s and controlled by one number 100 mA sensitivity 63 AMPS DP RCCB backed up with 1 no 63 Amps 4 pole MCB. (L DB/LPD )All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
329	Supplying, installing ,connecting testing and commissioning of the following double door 1/4 rows vertical type 1.4 mm thick and 1. 2 thick door sheet steel enclosed fully recessed type, TPN Miniature Circuit Breakers Distribution Boards dust proof, vermin proof, with hinged and lockable doors complete with DP MCB's and inter-connection with copper wire , insulated copper bus bar , cable glands/conduit entry bushes, bonding to earth and painting. Also provide separate neutral busbar for each phase. Provide separate Earth Links for each phase. Use brass thimbles for connections of all wires. 1 row for single phase and 4 rows for 3 phase. Provide separate 4 way 63 A main neutral link also. The phase busbar links shall be factory pre insulated.14 Way TPN DB, each phase consisting of 12 Nos. 10/20 AMP SP MCB’s and controlled by one number 100 mA sensitivity 63 AMPS DP RCCB backed up with 1 no 63 Amps 4 pole MCB.(PDB)All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
330	Supplying, installing ,connecting testing and commissioning of the following double door 1/4 rows vertical type 1.4 mm thick and 1. 2 thick door sheet steel enclosed fully recessed type, TPN Miniature Circuit Breakers Distribution Boards dust proof, vermin proof, with hinged and lockable doors complete with DP MCB's and inter-connection with copper wire , insulated copper bus bar , cable glands/conduit entry bushes, bonding to earth and painting. Also provide separate neutral busbar for each phase. Provide separate Earth Links for each phase. Use brass thimbles for connections of all wires. 1 row for single phase and 4 rows for 3 phase. Provide separate 4 way 63 A main neutral link also. The phase busbar links shall be factory pre insulated.14+2 Way SPN DB, consisting of 12 Nos. 10/20 AMP SP MCB’s and controlled by one number 100 mAsensitivity 40 AMPS DP RCCB backed up with 40 Amps DP MCB. (For Emergency light) All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
331	Supplying, installing ,connecting testing and commissioning of the following double door 1/4 rows vertical type 1.4 mm thick and 1. 2 thick door sheet steel enclosed fully recessed type, TPN Miniature Circuit Breakers Distribution Boards dust proof, vermin proof, with hinged and lockable doors complete with DP MCB's and inter-connection with copper wire , insulated copper bus bar , cable glands/conduit entry bushes, bonding to earth and painting. Also provide separate neutral busbar for each phase. Provide separate Earth Links for each phase. Use brass thimbles for connections of all wires. 1 row for single phase and 4 rows for 3 phase. Provide separate 4 way 63 A main neutral link also. The phase busbar links shall be factory pre insulated.10 Way SPN DB, consisting of 4 Nos. 20/32 AMP DP MCB’s and controlled by one number 100 mA sensitivity 63 AMPS DP RCCB ( 100 mA) for backed up with 63 Amps 4P MCB. The bus bar shall be Twin bus bar. ( Server DB)All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
332	Supplying, installing ,connecting testing and commissioning of the following double door 1/4 rows vertical type 1.4 mm thick and 1. 2 thick door sheet steel enclosed fully recessed type, TPN Miniature Circuit Breakers Distribution Boards dust proof, vermin proof, with hinged and lockable doors complete with DP MCB's and inter-connection with copper wire , insulated copper bus bar , cable glands/conduit entry bushes, bonding to earth and painting. Also provide separate neutral busbar for each phase. Provide separate Earth Links for each phase. Use brass thimbles for connections of all wires. 1 row for single phase and 4 rows for 3 phase. Provide separate 4 way 63 A main neutral link also. The phase busbar links shall be factory pre insulated. Supply, installation, testing and commissioning of sheet metal weather proof enclosure with 4P RCCB(300 Ma) with Earth Leakage Relay with CBCTs (300mA).This shall include cable entry boxes both for incoming and outgoing cable) For VRV Out Door units.All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
333	Supplying, installing ,connecting testing and commissioning of the following double door 1/4 rows vertical type 1.4 mm thick and 1. 2 thick door sheet steel enclosed fully recessed type, TPN Miniature Circuit Breakers Distribution Boards dust proof, vermin proof, with hinged and lockable doors complete with DP MCB's and inter-connection with copper wire , insulated copper bus bar , cable glands/conduit entry bushes, bonding to earth and painting. Also provide separate neutral busbar for each phase. Provide separate Earth Links for each phase. Use brass thimbles for connections of all wires. 1 row for single phase and 4 rows for 3 phase. Provide separate 4 way 63 A main neutral link also. The phase busbar links shall be factory pre insulated. Supply, installation, testing and commissioning of sheet metal enclosure with 63 A TPN MCCB. This shall include cable entry boxes both for incoming cables) For 20 KVA UPS.All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
334	Supplying, installation, connecting, testing and commissioning of ceiling fan and regulator, including wiring, the down road of standard length (upto 30 Cm.) with 1.5 Sq.mm. PVC insulated copper conductor single core cable etc (Usha,Bajaj,Havells make or equivalent as approved by site engineer/ Project Manager,Ceiling Fan 1200 mm sweep, category-A
335	Supply, installation ,connecting , testing and commissioning of celing LED light 20 watt , 1200 mm long of approved brand/ Make :- syska . Bajaj , Phillips or equivalent complete as per direction of Engineer Incharge /Project Manager .
336	Providing and installation of e 600 CFM xhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. (Bajaj Maxima DxI 300 mm White Dom Exhaust Fan) or equivalent . Complete in all respect including carriage and cost of material at site of work as per direction and to the entire including all leads and lifts as per direction of Engineer -in -charge.
337	Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. (Bajaj Maxima DxI 300 mm White Dom Exhaust Fan) or equivalent . Complete in all respect including carriage and cost of material including all leads and lifts as per direction of Engineer -in -charge.
338	Supply ,installation ,testing and commissioning of wall mounted automatic aerosol dispenser of approved make including all leads and lifts as per direction of Engineer -in -charge.
339	Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18\\" long, making good the damages, electrical connections, safety valve connections, 4 star rating, testing and commissioning etc. (Racold Make Andris Slim 25 litres horizontal wall mounting) or equivalent including all leads and lifts as per direction of Engineer -in -charge.
340	supplying, installation, connecting, testing and commissioning of 600 x 600 mm 36 watt square LED panel ceiling light colour - cool white 6000k of aproved brand / make.Complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager Make ;- Bajaj, Phillips, Syska ,Wipro,Cromption or equivalent.
341	supplying, installation, connecting, testing and commissioning of 12 watt celing fixture , recessed mounted downlighter of aproved brand / Make with Technical Specifications as per manufacturer ,Complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager Make ;- Bajaj, Phillips, Syska ,Wipro,Cromption or equivalent
342	Supply ,installation ,testing and commissioning of 3 Watts LED Nickel cadmium battery of approved make at site of work as per drawings , complete as per direction and to the entire satisfaction of Engineer Incharge / Project Manager.
343	supplying, installation, connecting, testing and commissioning of linear Cove light flexible led 15w strip light as per requirement Complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager Make ;- Bajaj, Phillips, Syska ,Wipro,Cromption, or equivalent
344	SITC of Pendant Luminaire LED of approved brand and manufacture ceiling hanging Complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager Make ;- Bajaj, Phillips, Syska ,Wipro,Cromption, or equivalentAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
345	SITC of1 Metal hanging fixture suitable for E27 holder with wallchiere wall lamp with bulb of SIGNOTECH make or equivalent. Complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
346	SITC of Metal enclosoures with locking system of required sizes as per drawing including painting with powder coated . Complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
347	Providing and fixing of Mirror Light 20W Wipro make or equivalent complete with all accessories including connections, testing and commissioning as required. Complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager
348	Providing and fixing of Bulck Head Light Model No.LW07 -141-XXX-57- G1 10 W Wipro make or equivalent complete with all accessories including connections, testing and commissioning as required. Complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager
349	Providing and fixing of Bracket light 12 Watt Wipro make or equivalent complete with all accessories including connections, testing and commissioning as required. Complete in all respect including carriage and cost of material at site of work as per direction and to the entire satisfaction of Engineer -In Charge / Project manager
350	Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18\\" long, making good the damages, electrical connections, safety valve connections, 4 star rating, testing and commissioning etc. (Racold Make Andris Slim 30 litres horizontal wall mounting or equivalent)
351	Design, manufacture, supplying & installing at site in positioning, connecting, testing and commissioning of the following cubical type, dead front, 2mm thick sheet steel enclosed, free standing indoor type extendible Sub Distribution Panel with vermin proof hinged lockable doors for each compartment provide bus bar interconnections for incoming and outgoing including feeders earthing and painting and as per specifications. The UPS Output Panel - shall consists of: MAIN INCOMER1 Nos. 63 A TP+ N MCCB microprocessor based (25KA/1 sec)( O/C, S/C,E/F) and neutral isolation link 100% of rated current. Terminals suitable to receive 4 x 1c x 16 sq. mm Cu. Flexible cable connection on one side and Busbar connection on the other side.INDICATING PANELS3 nos phase indicating lamps (LED type) each backed up with MCB and switch shall be provided for each incomer and buscoupler.Provide Transient Voltage Surge Suppressor Rating 40kA class I&II along with 100 A MCCB. Including all necessary accessories. For Switching Operation on each incomer.Provide Intelligent Panel Meter - multifunctional meter with RS485 for all incoming feederBUSBARS SECTION
352	150 amps 4 pole Copper busbar chamber of suitable length with copper busbars. All busbars and interconnections shall be of suitable size copper busbar, current density of copper shall not be more than 1.6 Amps/ sq.mm cross sectional area of Bus Bar provide 100% capacity for neutral bus bar. The Bus Bar shall be suitable for max temperature rise of 30ºC above ambient of 45ºC OUTGOINGS+5 Nos. 63 A 4P MCB (10 kA) terminals suitable to receive cable on one side and wire connection to Bus bars.The UPS Output Panel as described above and specifications complete All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
353	Design, manufacture, supplying & installing A.C. PANEL The A.C. Panel -1&2 shall consists of : Out Door Panel MAIN INCOMER1 No.160 A TPN MCCB (25KA/1 sec)( O/C, S/C,E/F) and neutral isolation link 50% of rated current. Terminals suitable to receive 1 x 3.5c x 95 sq. mm Al cable connection on one side and Busbar connection on the other sideBUSBAR Section 200 amps TPN busbar chamber of suitable length with aluminium busbars. All busbars and interconnections shall be of suitable size aluminium strips current density of copper shall not be more than 0.8 Amps/ sq.mm.provide 50% capacity for neutral bus bar.3 nos phase indicating lamps (LED type) each backed up with MCB and switch shall be provided for each incomer.Provide on/off indication lamp on incomer Provide Intelligent Panel Meter - with RS485 for all incoming feeder The A.C. Panel 1&2 as described above and specifications complete All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
354	Design, manufacture, supplying & installing A.C. PANEL The A.C. Panel -1&2 shall consists of : Out Door Panel MAIN INCOMER1 No.160 A TPN MCCB (25KA/1 sec)( O/C, S/C,E/F) and neutral isolation link 50% of rated current. Terminals suitable to receive 1 x 3.5c x 95 sq. mm Al cable connection on one side and Busbar connection on the other side.BUSBAR Section re than 0.8 Amps/ sq.mm.provide 50% capacity for neutral bus bar. 3 nos phase indicating lamps (LED type) each backed up with MCB and switch shall be provided for each incomer.Provide on/off indication lamp on incomer 20 Nos 40/32 A FP MCB (10 kA) terminals suitable to receive AR Cable on one side and Busbar connection on the other sideThe A.C. Panel 3 as described above and specifications complete.All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
355	Providing & fixing in position 1000 mm wide , Electrical Insulating Mats as per IS 15652:2006, 2mm thick, suitable up to 3.3 KV , fire retardant,no effect of acids, alkalies and transformer oils, moisture proof, high tensile strength and texture finish / cloth impression (Anti slip , marking on top) .All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
356	Supply & fixing in position approved shock treatment chart written in English, Hindi and Local language. These charts shall be framed in wooden frame & covered with clear glass.All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
357	Supply & fixing in position the best quality danger notice boards of approved shape & size as reqd. by the local Electrical Inspecting Authority written in English, Hindi & local language.All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
358	Fabricating supplying and installation at site of work , on ceiling/ surface 1.6 mm thick G.I raceways/cable tray of height 50 mm and 1.6 mm thick openable cover, totally enclosed, the joints between two lengths of channels or between channel and junction box shall be joined together with 3 mm thick G.I coupler plates to make it dust and water proof. The cost shall including all supporting and fixing accessories including dash fasteners. The maximum spacing of the supporting arrangement shall be 1.2 Meter size:-250 mm (wide) x 40 mm (height) All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
359	Fabricating supplying to site of installation, installation on ceiling/ surface 1.6 mm thick G.I raceways /cable tray of height 50 mm and 1.6 mm thick openable cover, totally enclosed, the joints between two lengths of channels or between channel and junction box shall be joined together with 3 mm thick G.I coupler plates to make it dust and water proof. The cost shall including all supporting and fixing accessories including dash fasteners. The maximum spacing of the supporting arrangement shall be 1. 2 Meter. 100 mm (wide) x 40 mm (height) All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
360	Fabricating supplying to site of installation, Junction boxes for Ceiling raceways made from 1.6 mm thick , with 1.6 mm thick G.I. including providing neoprene gaskets between the cover and the junction box, cadmium plated flat/round head screws, height as per site condition,totally enclosed. Proper cutouts shall be made in the side walls for raceway entry wherever required. The junction box shall be all side walls should be welded expect top cover and all side walls shall have suitable size of rectangular knock out holes for taking raceways / conduits as required and not a complete cut out. The top cover should be sealed with M Seal to make it dust and water proof complete as required etc. 200 mm x 200 x 50 mm (height) All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
361	Fabricating supplying to site of installation, Junction boxes for Ceiling raceways made from 1.6 mm thick , with 1.6 mm thick G.I. including providing neoprene gaskets between the cover and the junction box, cadmium plated flat/round head screws, height as per site condition,totally enclosed. Proper cutouts shall be made in the side walls for raceway entry wherever required. The junction box shall be all side walls should be welded expect top cover and all side walls shall have suitable size of rectangular knock out holes for taking raceways / conduits as required and not a complete cut out. The top cover should be sealed with M Seal to make it dust and water proof complete as required etc. 150 mm x 150 x 50 mm (height)
362	Fabricating supplying to site of installation, in floor including chase cutting of floor,leveling, refilling and making good the same from 1.6 mm thick and 2 mm thick cover pregalvanised G.I sheet, totally enclosed, height 40 mm . The two lengths of raceways shall be fitted with Collars , 50 mm wide, 3 mm thick , press fit type. The raceways shall be clamped to the floor slab with GI clamps , 3mm thick and shall be screwed to the floor slab. The joint between raceway and junction box will be made with GI flexible strip( 3 nos), 3 mm thick, 4 inches long ,15 mm wide which will be nut bolted to the Junction box complete as required etc.250 mm (wide) x 40 mm (height) All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
363	Fabricating supplying to site of installation, in floor including chase cutting of floor,leveling, refilling and making good the same from 1.6 mm thick and 2 mm thick cover pregalvanised G.I sheet, totally enclosed, height 40 mm . The two lengths of raceways shall be fitted with Collars , 50 mm wide, 3 mm thick , press fit type. The raceways shall be clamped to the floor slab with GI clamps , 3mm thick and shall be screwed to the floor slab. The joint between raceway and junction box will be made with GI flexible strip( 3 nos), 3 mm thick, 4 inches long ,15 mm wide which will be nut bolted to the Junction box complete as required etc.150 mm (wide) x40 mm (height) All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
364	Fabricating supplying to site of installation, in floor including chase cutting of floor,leveling, refilling and making good the same from 1.6 mm thick and 2 mm thick cover pregalvanised G.I sheet, totally enclosed, height 40 mm . The two lengths of raceways shall be fitted with Collars , 50 mm wide, 3 mm thick , press fit type. The raceways shall be clamped to the floor slab with GI clamps , 3mm thick and shall be screwed to the floor slab. The joint between raceway and junction box will be made with GI flexible strip( 3 nos), 3 mm thick, 4 inches long ,15 mm wide which will be nut bolted to the Junction box complete as required etc. 100 mm (wide) x 40 mm (height) All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
365	Fabricating supplying to site of installation, Junction boxes for floor raceways made from 1.6 mm thick , with 2.0mm thick G.I power coated cover including providing neoprene gaskets between the cover and the junction box, cadmium plated flat/round head screws, height as per site condition,totally enclosed. Proper cutouts shall be made in the side walls for raceway entry wherever required. The junction box shall be all side walls should be welded expect top cover and all side walls shall have suitable size of rectangular knock out holes for taking raceways / conduits as required and not a complete cut out. The top cover should be sealed with M Seal to make it dust and water proof complete as required etc. 300 mm x 300 x 60 mm (height) All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
366	Fabricating supplying to site of installation, Junction boxes for floor raceways made from 1.6 mm thick , with 2.0mm thick G.I power coated cover including providing neoprene gaskets between the cover and the junction box, cadmium plated flat/round head screws, height as per site condition,totally enclosed. Proper cutouts shall be made in the side walls for raceway entry wherever required. The junction box shall be all side walls should be welded expect top cover and all side walls shall have suitable size of rectangular knock out holes for taking raceways / conduits as required and not a complete cut out. The top cover should be sealed with M Seal to make it dust and water proof complete as required etc. 200 mm x 200 x 60 mm (height) All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
367	Fabricating supplying to site of installation, Junction boxes for floor raceways made from 1.6 mm thick , with 2.0mm thick G.I power coated cover including providing neoprene gaskets between the cover and the junction box, cadmium plated flat/round head screws, height as per site condition,totally enclosed. Proper cutouts shall be made in the side walls for raceway entry wherever required. The junction box shall be all side walls should be welded expect top cover and all side walls shall have suitable size of rectangular knock out holes for taking raceways / conduits as required and not a complete cut out. The top cover should be sealed with M Seal to make it dust and water proof complete as required etc. 150 mm x 150 x 60 mm (height) All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
368	Design manufacture , supply and fixing in position the cable trays of the following sizes for supporting 1.1 KV grade armoured/unarmoured aluminium /copper conductor cables. Fabricate the cable trays from perforated 1.6/2mm thick M.S. CRCA sheet duly galvanised with expansion coupler plates duly galvanised, with bolts, washer and nuts. Knock out holes for cable connections as per approved design. The tray should comply with the specification of NEC (National Electric Codes) and NEMA (National Electric Manufacturers Association). The steel should be as per IS:226 and galvanising as per IS :2629/BS 729/ASTM 123. The fixing of cable trays include necessary ceiling suspended / wall mounted supports fixed in ceiling with Fabricated Ms Angle supports,Ms C channel,Base plate etc, The rate shall include bends, angles, Ts, HITECH ROD and all accessories complete Supports Shall be provided at every 1200mm. The cost of supports to be included. Supports must be welded to a square true ceiling base plate with arc welding, the base plate must be fixed to the true ceiling with 04 nos. of HILTI anchor fasteners. Supports must be made out of MS L angle type for cable tray width of 450mm and above. For Less than 450mm width tray support with hi-tech threaded rods & anchor fasteners. The maximum spacing of the supporting arrangement shall be 1. 2 M. 150 mm wide x 40 mm x 1.6 mm thk All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
369	Design manufacture , supply and fixing in position the cable trays of the following sizes for supporting 1.1 KV grade armoured/unarmoured aluminium /copper conductor cables. Fabricate the cable trays from perforated 1.6/2mm thick M.S. CRCA sheet duly galvanised with expansion coupler plates duly galvanised, with bolts, washer and nuts. Knock out holes for cable connections as per approved design. The tray should comply with the specification of NEC (National Electric Codes) and NEMA (National Electric Manufacturers Association). The steel should be as per IS:226 and galvanising as per IS :2629/BS 729/ASTM 123. The fixing of cable trays include necessary ceiling suspended / wall mounted supports fixed in ceiling with Fabricated Ms Angle supports,Ms C channel,Base plate etc, The rate shall include bends, angles, Ts, HITECH ROD and all accessories complete Supports Shall be provided at every 1200mm. The cost of supports to be included. Supports must be welded to a square true ceiling base plate with arc welding, the base plate must be fixed to the true ceiling with 04 nos. of HILTI anchor fasteners. Supports must be made out of MS L angle type for cable tray width of 450mm and above. For Less than 450mm width tray support with hi-tech threaded rods & anchor fasteners. The maximum spacing of the supporting arrangement shall be 1. 2 M. 300 mm wide x 40 mm x 1.6 mm thkAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
370	Design manufacture , supply and fixing in position the cable trays of the following sizes for supporting 1.1 KV grade armoured/unarmoured aluminium /copper conductor cables. Fabricate the cable trays from perforated 1.6/2mm thick M.S. CRCA sheet duly galvanised with expansion coupler plates duly galvanised, with bolts, washer and nuts. Knock out holes for cable connections as per approved design. The tray should comply with the specification of NEC (National Electric Codes) and NEMA (National Electric Manufacturers Association). The steel should be as per IS:226 and galvanising as per IS :2629/BS 729/ASTM 123. The fixing of cable trays include necessary ceiling suspended / wall mounted supports fixed in ceiling with Fabricated Ms Angle supports,Ms C channel,Base plate etc, The rate shall include bends, angles, Ts, HITECH ROD and all accessories complete Supports Shall be provided at every 1200mm. The cost of supports to be included. Supports must be welded to a square true ceiling base plate with arc welding, the base plate must be fixed to the true ceiling with 04 nos. of HILTI anchor fasteners. Supports must be made out of MS L angle type for cable tray width of 450mm and above. For Less than 450mm width tray support with hi-tech threaded rods & anchor fasteners. The maximum spacing of the supporting arrangement shall be 1. 2 M. 450 mm wide x 40 mm x 2.0 mm thk All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
371	Supply and laying, effecting proper connections, testing & commissioning of the following sizes of 1.1 KV armoured XLPE / unarmoured Cross linked polyethylene insulated, PVC sheathed (XLPE), conforming to IS: 7098 (Part-1)- 1988 ( 90 deg C) aluminium /copper conductor cables conforming to IS : 1554 and IS 694 for Flexible copper cable Part I - 1976 with latest amendments laid over MS supports in existing RCC ducts/ laid in ground /laid on Cable Trays including clamping the cables to supports in an approved manner as required complete with all accessories.All cables shall have thermo setting insulation XLPE and low emission of smoke and corrosive gas when affected by fire. 3.5 c x 240 sq.mm 1.1 KV grade XLPE Insulated FRLS sheathed armoured aluminium conductor cableAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
372	Supply and laying, effecting proper connections, testing & commissioning of the following sizes of 1.1 KV armoured XLPE / unarmoured Cross linked polyethylene insulated, PVC sheathed (XLPE), conforming to IS: 7098 (Part-1)- 1988 ( 90 deg C) aluminium /copper conductor cables conforming to IS : 1554 and IS 694 for Flexible copper cable Part I - 1976 with latest amendments laid over MS supports in existing RCC ducts/ laid in ground /laid on Cable Trays including clamping the cables to supports in an approved manner as required complete with all accessories.All cables shall have thermo setting insulation XLPE and low emission of smoke and corrosive gas when affected by fire.3.5 c x 150 sq.mm1.1 KV grade XLPE Insulated FRLS sheathed armoured aluminium conductor cableAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
373	Supply and laying, effecting proper connections, testing & commissioning of the following sizes of 1.1 KV armoured XLPE / unarmoured Cross linked polyethylene insulated, PVC sheathed (XLPE), conforming to IS: 7098 (Part-1)- 1988 ( 90 deg C) aluminium /copper conductor cables conforming to IS : 1554 and IS 694 for Flexible copper cable Part I - 1976 with latest amendments laid over MS supports in existing RCC ducts/ laid in ground /laid on Cable Trays including clamping the cables to supports in an approved manner as required complete with all accessories.All cables shall have thermo setting insulation XLPE and low emission of smoke and corrosive gas when affected by fire.3.5 c x 95 sq.mm 1.1 KV grade XLPE Insulated FRLS sheathed armoured aluminium conductor cableAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
374	Supply and laying, effecting proper connections, testing & commissioning of the following sizes of 1.1 KV armoured XLPE / unarmoured Cross linked polyethylene insulated, PVC sheathed (XLPE), conforming to IS: 7098 (Part-1)- 1988 ( 90 deg C) aluminium /copper conductor cables conforming to IS : 1554 and IS 694 for Flexible copper cable Part I - 1976 with latest amendments laid over MS supports in existing RCC ducts/ laid in ground /laid on Cable Trays including clamping the cables to supports in an approved manner as required complete with all accessories.All cables shall have thermo setting insulation XLPE and low emission of smoke and corrosive gas when affected by fire 4 c x 16 sq.mm 1.1 KV grade XLPE Insulated FRLS sheathed armoured aluminium conductor cable (L, P DBs )All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
375	Supply and laying, effecting proper connections, testing & commissioning of the following sizes of 1.1 KV armoured XLPE / unarmoured Cross linked polyethylene insulated, PVC sheathed (XLPE), conforming to IS: 7098 (Part-1)- 1988 ( 90 deg C) aluminium /copper conductor cables conforming to IS : 1554 and IS 694 for Flexible copper cable Part I - 1976 with latest amendments laid over MS supports in existing RCC ducts/ laid in ground /laid on Cable Trays including clamping the cables to supports in an approved manner as required complete with all accessories.All cables shall have thermo setting insulation XLPE and low emission of smoke and corrosive gas when affected by fire 4 c x 16 sq.mm 1.1 KV grade XLPE Insulated FRLS sheathed armoured copper conductor cable (UPS DBs)All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
376	Supply and laying, effecting proper connections, testing & commissioning of the following sizes of 1.1 KV armoured XLPE / unarmoured Cross linked polyethylene insulated, PVC sheathed (XLPE), conforming to IS: 7098 (Part-1)- 1988 ( 90 deg C) aluminium /copper conductor cables conforming to IS : 1554 and IS 694 for Flexible copper cable Part I - 1976 with latest amendments laid over MS supports in existing RCC ducts/ laid in ground /laid on Cable Trays including clamping the cables to supports in an approved manner as required complete with all accessories.All cables shall have thermo setting insulation XLPE and low emission of smoke and corrosive gas when affected by fire 4 c x 10 sq.mm 1.1 KV grade XLPE Insulated FRLS sheathed armoured copper conductor cable All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
377	Supply and laying, effecting proper connections, testing & commissioning of the following sizes of 1.1 KV armoured XLPE / unarmoured Cross linked polyethylene insulated, PVC sheathed (XLPE), conforming to IS: 7098 (Part-1)- 1988 ( 90 deg C) aluminium /copper conductor cables conforming to IS : 1554 and IS 694 for Flexible copper cable Part I - 1976 with latest amendments laid over MS supports in existing RCC ducts/ laid in ground /laid on Cable Trays including clamping the cables to supports in an approved manner as required complete with all accessories.All cables shall have thermo setting insulation XLPE and low emission of smoke and corrosive gas when affected by fire 4 c x 6 sq.mm 1.1 KV grade XLPE Insulated FRLS sheathed armoured copper conductor cableAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
378	Supply and laying, effecting proper connections, testing & commissioning of the following sizes of 1.1 KV armoured XLPE / unarmoured Cross linked polyethylene insulated, PVC sheathed (XLPE), conforming to IS: 7098 (Part-1)- 1988 ( 90 deg C) aluminium /copper conductor cables conforming to IS : 1554 and IS 694 for Flexible copper cable Part I - 1976 with latest amendments laid over MS supports in existing RCC ducts/ laid in ground /laid on Cable Trays including clamping the cables to supports in an approved manner as required complete with all accessories.All cables shall have thermo setting insulation XLPE and low emission of smoke and corrosive gas when affected by fire 3c x 6 sq.mm 1.1 KV grade XLPE Insulated FRLS sheathed armoured copper conductor cableAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
379	Supply and laying, effecting proper connections, testing & commissioning of the following sizes of 1.1 KV armoured XLPE / unarmoured Cross linked polyethylene insulated, PVC sheathed (XLPE), conforming to IS: 7098 (Part-1)- 1988 ( 90 deg C) aluminium /copper conductor cables conforming to IS : 1554 and IS 694 for Flexible copper cable Part I - 1976 with latest amendments laid over MS supports in existing RCC ducts/ laid in ground /laid on Cable Trays including clamping the cables to supports in an approved manner as required complete with all accessories.All cables shall have thermo setting insulation XLPE and low emission of smoke and corrosive gas when affected by fire 12 c x 1.5 sq.mm 1.1 KV grade XLPE Insulated FRLS sheathed armoured copper conductor cableAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
380	Supply and laying, effecting proper connections, testing & commissioning of the following sizes of 1.1 KV armoured XLPE / unarmoured Cross linked polyethylene insulated, PVC sheathed (XLPE), conforming to IS: 7098 (Part-1)- 1988 ( 90 deg C) aluminium /copper conductor cables conforming to IS : 1554 and IS 694 for Flexible copper cable Part I - 1976 with latest amendments laid over MS supports in existing RCC ducts/ laid in ground /laid on Cable Trays including clamping the cables to supports in an approved manner as required complete with all accessories.All cables shall have thermo setting insulation XLPE and low emission of smoke and corrosive gas when affected by fire 2 c x 10 sq.mm 1.1 KV grade XLPE Insulated FRLS sheathed armoured copper conductor cable ( EM)All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
381	Supply and laying, effecting proper connections, testing & commissioning of the following sizes of 1.1 KV armoured XLPE / unarmoured Cross linked polyethylene insulated, PVC sheathed (XLPE), conforming to IS: 7098 (Part-1)- 1988 ( 90 deg C) aluminium /copper conductor cables conforming to IS : 1554 and IS 694 for Flexible copper cable Part I - 1976 with latest amendments laid over MS supports in existing RCC ducts/ laid in ground /laid on Cable Trays including clamping the cables to supports in an approved manner as required complete with all accessories.All cables shall have thermo setting insulation XLPE and low emission of smoke and corrosive gas when affected by fire 1c x 25 sq.mm FRLS XLPE insulated flexible copper conductor cables All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
382	Supplying and making of end termination for the following size of 1.1 KV XLPE insulated copper conductor armoured cables including providing heavy duty copper terminal crimping lugs, solder, insulation tape, approved sealing epoxy compound, double compression brass cable glands, effecting gland connections and effecting terminal connections to the equipment complete as required. Use compression lugs and PG Threaded Nylon Flexible cable glands for single core flexible cables 3.5 c x 240 sq.mm 1.1 KV grade XLPE Insulated FRLS sheathed armoured aluminium conductor cableAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
383	Supplying and making of end termination for the following size of 1.1 KV XLPE insulated copper conductor armoured cables including providing heavy duty copper terminal crimping lugs, solder, insulation tape, approved sealing epoxy compound, double compression brass cable glands, effecting gland connections and effecting terminal connections to the equipment complete as required. Use compression lugs and PG Threaded Nylon Flexible cable glands for single core flexible cables 3.5 c x 150 sq.mm1.1 KV grade XLPE Insulated FRLS sheathed armoured aluminium conductor cableAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
384	Supplying and making of end termination for the following size of 1.1 KV XLPE insulated copper conductor armoured cables including providing heavy duty copper terminal crimping lugs, solder, insulation tape, approved sealing epoxy compound, double compression brass cable glands, effecting gland connections and effecting terminal connections to the equipment complete as required. Use compression lugs and PG Threaded Nylon Flexible cable glands for single core flexible cables 3.5 c x 95 sq.mm 1.1 KV grade XLPE Insulated FRLS sheathed armoured aluminium conductor cableAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
385	Supplying and making of end termination for the following size of 1.1 KV XLPE insulated copper conductor armoured cables including providing heavy duty copper terminal crimping lugs, solder, insulation tape, approved sealing epoxy compound, double compression brass cable glands, effecting gland connections and effecting terminal connections to the equipment complete as required. Use compression lugs and PG Threaded Nylon Flexible cable glands for single core flexible cables 4 c x 16 sq.mm 1.1 KV grade XLPE Insulated FRLS sheathed armoured aluminium conductor cable (L, P DBs & AHUs)All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
386	Supplying and making of end termination for the following size of 1.1 KV XLPE insulated copper conductor armoured cables including providing heavy duty copper terminal crimping lugs, solder, insulation tape, approved sealing epoxy compound, double compression brass cable glands, effecting gland connections and effecting terminal connections to the equipment complete as required. Use compression lugs and PG Threaded Nylon Flexible cable glands for single core flexible cables 4 c x 16 sq.mm 1.1 KV grade XLPE Insulated FRLS sheathed armoured copper conductor cable All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
387	Supplying and making of end termination for the following size of 1.1 KV XLPE insulated copper conductor armoured cables including providing heavy duty copper terminal crimping lugs, solder, insulation tape, approved sealing epoxy compound, double compression brass cable glands, effecting gland connections and effecting terminal connections to the equipment complete as required. Use compression lugs and PG Threaded Nylon Flexible cable glands for single core flexible cables 4 c x 10 sq.mm 1.1 KV grade XLPE Insulated FRLS sheathed armoured copper conductor cable All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
388	Supplying and making of end termination for the following size of 1.1 KV XLPE insulated copper conductor armoured cables including providing heavy duty copper terminal crimping lugs, solder, insulation tape, approved sealing epoxy compound, double compression brass cable glands, effecting gland connections and effecting terminal connections to the equipment complete as required. Use compression lugs and PG Threaded Nylon Flexible cable glands for single core flexible cables 4 c x 6 sq.mm 1.1 KV grade XLPE Insulated FRLS sheathed armoured copper conductor cableAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
389	Supplying and making of end termination for the following size of 1.1 KV XLPE insulated copper conductor armoured cables including providing heavy duty copper terminal crimping lugs, solder, insulation tape, approved sealing epoxy compound, double compression brass cable glands, effecting gland connections and effecting terminal connections to the equipment complete as required. Use compression lugs and PG Threaded Nylon Flexible cable glands for single core flexible cables 3c x 6 sq.mm 1.1 KV grade XLPE Insulated FRLS sheathed armoured copper conductor cableAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
390	Supplying and making of end termination for the following size of 1.1 KV XLPE insulated copper conductor armoured cables including providing heavy duty copper terminal crimping lugs, solder, insulation tape, approved sealing epoxy compound, double compression brass cable glands, effecting gland connections and effecting terminal connections to the equipment complete as required. Use compression lugs and PG Threaded Nylon Flexible cable glands for single core flexible cables 12 c x 1.5 sq.mm 1.1 KV grade XLPE Insulated FRLS sheathed armoured copper conductor cableAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
391	Supplying and making of end termination for the following size of 1.1 KV XLPE insulated copper conductor armoured cables including providing heavy duty copper terminal crimping lugs, solder, insulation tape, approved sealing epoxy compound, double compression brass cable glands, effecting gland connections and effecting terminal connections to the equipment complete as required. Use compression lugs and PG Threaded Nylon Flexible cable glands for single core flexible cables 1c x 16 sq.mm FRLS XLPE insulated flexible copper conductor cables All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
392	Providing and fixing in position the following copper strips and wires including providing all fixing accessories and effecting proper connections G.I. tape 25 mm x 6 mm All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
393	Providing and fixing in position the following copper strips and wires including providing all fixing accessories and effecting proper connections Copper tape 25mm x 3 mm All above should be complete to the entire including all leads and lifts as per direction of Engineer -in -charge.
394	Providing and fixing in position the following copper strips and wires including providing all fixing accessories and effecting proper connections Cu wire 8 SWGAll above should be complete to the including all leads and lifts as per direction of Engineer -in -charge.
395	Providing and fixing in position the following copper strips and wires including providing all fixing accessories and effecting proper connections Cu wire 12 SWGAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
396	Supply and laying, effecting proper connections, testing & commissioning of the following sizes of 1.1 KV armoured XLPE/ unarmoured Cross linked polyethylene insulated, PVC sheathed (XLPE), conforming to IS: 7098 (Part-1)- 1988 ( 90 deg C) aluminium /copper conductor cables conforming to IS : 1554 and IS 694 for Flexible copper cable Part I - 1976 with latest amendments laid over MS supports in existing RCC ducts/ laid in ground /laid on Cable Trays including clamping the cables to supports in an approved manner as required complete with all accessories.All cables shall have thermo setting insulation XLPE and low emission of smoke and corrosive gas when affected by fire 1c x 16 sq.mm FRLS XLPE insulated flexible copper conductor cables All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
397	Supply and laying, effecting proper connections, testing & commissioning of the following sizes of 1.1 KV armoured XLPE/ unarmoured Cross linked polyethylene insulated, PVC sheathed (XLPE), conforming to IS: 7098 (Part-1)- 1988 ( 90 deg C) aluminium /copper conductor cables conforming to IS : 1554 and IS 694 for Flexible copper cable Part I - 1976 with latest amendments laid over MS supports in existing RCC ducts/ laid in ground /laid on Cable Trays including clamping the cables to supports in an approved manner as required complete with all accessories.All cables shall have thermo setting insulation XLPE and low emission of smoke and corrosive gas when affected by fire 1 x 10 Sq. mm FRLS XLPE insulated flexible copper conductor cables (Green Colour for UPS DB Sub-main Earthing)All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
398	Supply and laying, effecting proper connections, testing & commissioning of the following sizes of 1.1 KV armoured XLPE/ unarmoured Cross linked polyethylene insulated, PVC sheathed (XLPE), conforming to IS: 7098 (Part-1)- 1988 ( 90 deg C) aluminium /copper conductor cables conforming to IS : 1554 and IS 694 for Flexible copper cable Part I - 1976 with latest amendments laid over MS supports in existing RCC ducts/ laid in ground /laid on Cable Trays including clamping the cables to supports in an approved manner as required complete with all accessories.All cables shall have thermo setting insulation XLPE and low emission of smoke and corrosive gas when affected by fire 1c x 16 sq.mm FRLS XLPE insulated flexible copper conductor cables All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
399	Supply and laying, effecting proper connections, testing & commissioning of the following sizes of 1.1 KV armoured XLPE/ unarmoured Cross linked polyethylene insulated, PVC sheathed (XLPE), conforming to IS: 7098 (Part-1)- 1988 ( 90 deg C) aluminium /copper conductor cables conforming to IS : 1554 and IS 694 for Flexible copper cable Part I - 1976 with latest amendments laid over MS supports in existing RCC ducts/ laid in ground /laid on Cable Trays including clamping the cables to supports in an approved manner as required complete with all accessories.All cables shall have thermo setting insulation XLPE and low emission of smoke and corrosive gas when affected by fire 1 x 10 Sq. mm FRLS XLPE insulated flexible copper conductor cables (Green Colour for UPS DB Sub-main Earthing)All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
400	Supply, Installation, testing and commissioning of Maintenance Free Earthing of make Electrolytic Earthing comprising of type 'K' copper 2.4 mm wall thickness, hollow tube 10 feet long, 2.125 inches outer diameter completely filled with non hazardous metallic salts (Terrafill) to achieve an earth resistance of less than 1 ohms. Provide masonry chamber with concrete base, CI manhole cover (cover to be heavy duty) with frame (300mm x 300mm) and make earth pit sign/ identifcation no in each earth station for UPS & ServerAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
401	Supply, installation, testing and commissioning of sheet metal enclosed with vision glass door 250 x 150 x 125 ( D) mm insulated earth distribution board with 1 nos. 32 x 6 mm copper tinned earth bars on SMC insulator suitable for 6/8 nos connections complete with all fixing accessories as required.All above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
402	Supplying and laying of the following sizes of Heavy duty PVC Pipes below paved area including chase cutting and back filling. For earthing cables and Fiber cables 100 mm outer diaAll above should be complete to the entire satisfaction of Engineer-in-Charge/Project Manager
403	Supply Installation Testing & Commissioning of Pendant Luminaire LED (Light Emitting Diode) system wattage-20W, Luminous Flux of luminaire is 1972lm, 4000K, CRI >80, 230V, Direct Emission, Profile in high quality powder coated, Halogen free internal wiring, PMMA Diffuser for Homogenous Light distribution. Protection Class I, IP 50,Dimension-L-1200mm, width-40mm,with trim-92mm,height-80mm. with all fixing accessories or equivalent
404	Supply Installation Testing & Commissioning of Recessed Down light LED with LED (Light Emitting Diode) system power: 12W, luminous flux of luminaire 902lm, 4000K , Neutral White, CRI >80, 230V, direct light emission, housing in Aluminium white, wide beam, with ceiling trim white, ON/OFF, Protection class I, IP40 Outer DAø = 154mm , Cutout dia =144 mm, H=55mm or equivalent including all leads and lifts as per direction of Engineer -in -charge.
405	Supply Installation Testing & Commissioning of Cove light flexible strip light 5 Watts/mtr ( Qty in running mtrs)wipro cat no-LS06-005-120-WW-50 or equivalent
406	Supply Installation Testing & Commissioning of 2x2,28 Watt LED Light fixture including all leads and lifts as per direction of Engineer -in -charge.
407	Supply Installation Testing & Commissioning of Ceiling Fan (1200 mm) dia including all leads and lifts as per direction of Engineer -in -charge.
408	Supply Installation Testing & Commissioning of Exhaust Fan (300 mm) diaincluding all leads and lifts as per direction of Engineer -in -charge.
409	Supply Installation Testing & Commissioning of of 3 Watts LED Ni Cd Battery backup up to min 90 minutes, emergency Exit light of Prolite Make or equivalent. The sample shall be submitted before ordering.including all leads and lifts as per direction of Engineer -in -charge.
410	Supply Installation Testing & Commissioning of Decorative Light -1 Metal hanging fixture suitable for E27 holder with LED lamp , CRI >80, 230V, direct light emission, housing in Metal, integral electronic control gear, ON/OFF, Protection class I, IP20 ,Dimension :Dia = 400mm ,wattage=18W,Suspension and Built-in Power cable Suspension Height= 1500 mm.including all leads and lifts as per direction of Engineer -in -charge.
411	Supply Installation Testing & Commissioning of LED Bulk head Light fixture including all leads and lifts as per direction of Engineer -in -charge.
412	Supply, Installation, Testing and Commissioning of metal enclsoures with locking system as per the lighting fixture to protect the ligths and cables from animal and public including all leads and lifts as per direction of Engineer -in -charge.
413	Supply, installation, connecting, testing and commissioning of addressable photoelectric type Smoke Detectors with mounting base, blinking LED etc. complete as required including all leads and lifts as per direction of Engineer -in -charge.
414	Supply, installation, connecting, testing and commissioning of addressable rate of rise cum fixed temperature Heat Detectors with mounting base, blinking LED etc. including all leads and lifts as per direction of Engineer -in -charge.
415	Supply, installation, connecting, testing and commissioning of Addressable Hooters cum strobe min. 95 db output , the cost includes of control module if required including all leads and lifts as per direction of Engineer -in -charge.
416	Supply, installation, connecting, testing and commissioning of Manual Call Box in ABS plastic as required complete. Pull Down Type including all leads and lifts as per direction of Engineer -in -charge.
417	Supply, installation, connecting, testing and commissioning of addressable fault Isolator including all leads and lifts as per direction of Engineer -in -charge.
418	Supply, installation, connecting, testing and commissioning of addressable control module for A.C. & Access Control System including all leads and lifts as per direction of Engineer -in -charge.
419	Supply, installation, connecting, testing and commissioning of addressable monitor module Flow switch including all leads and lifts as per direction of Engineer -in -charge.
420	Supply,installation ,testing and commissioning of Microprocessor based 1 loop panel ,Networkable analog addressable type fire alarm control panel with 640 character LCD display.The panel shall equiped with sufficient no. of loops,each loop shall have capacity of 250 analog devices in each loop four access levels,capable of taking flash scan devices,Flash EPROM sufficient no. of programmable relay controls for controlling AHU's,pressurization fans,ventilation fans at fire pump room,monitoring of fire hydrant and fire sprinkler,240v AC power supply,automatic battery charger,24v sealed lead acid battery sufficient for 24hrs normal working and 2hrs during emergency as required according to specification.The panel shall be UL864 9th edition listed with response time less than 10sec.Note:The vendor shall provide panel UL 9th edition listing certificate. including all leads and lifts as per direction of Engineer -in -charge.
421	Supply & laying of following grade with copper conductor armoured copper conductor cable as per specifications in cable trays, clamped including anchor fastners to wall with suitable clamps, saddles fixing bolts, 2 Metal cable glands for each detector back box, complete in all respect as required as per specifications: 2 core x 1.5 sq. mm including all leads and lifts as per direction of Engineer -in -charge.
422	Providing and fixing in position 1.2mm thick M.S. outlet boxes for housing smoke detectors/heat detectors including providing 3 mm thick hylam sheet cover as required: 75mm x 75mm x 75mm including all leads and lifts as per direction of Engineer -in -charge.
423	Supply, installation, connecting, testing and commissioning of Response indicator including all leads and lifts as per direction of Engineer -in -charge.
424	Supply, Installation, Testing and Commissioning of 5MP AI Dome Network Camera, Image Sensor: 1/2.8\\" Progressive Scan CMOS, 120dB WDR, S/N > 50dB. mage Resolution: 2592x1944, IR Distance: Up to 30m. Frame Rate: 30fps@(2592x1944), 60fps@(1920x1080, Secondary Stream, Tertiary Stream. Video Compression: H.265+/H.265(HEVC)/H.26 +/H.264/MJPEG. Video Bit Rate: 16Kbps∼16Mbps. Interface: Ethernet: 1xRJ45 port. Built-in Microphone. Alarm I/O. Intelligent Analytics: Video Analysis, Face Detection, People Counting. IP67-rated including all leads and lifts as per direction of Engineer -in -charge.
425	Supply, Installation, Testing and Commissioning of 5MP AI Bullet Network Camera, Image Sensor: 1/2.8\\" Progressive Scan CMOS, 120dB WDR, S/N > 50dB. mage Resolution: 2592x1944, IR Distance: Up to 30m. Frame Rate: 30fps@(2592x1944), 60fps@(1920x1080, Secondary Stream, Tertiary Stream. Video Compression: H.265+/H.265(HEVC)/H.26 +/H.264/MJPEG. Video Bit Rate: 16Kbps∼16Mbps. Interface: Ethernet: 1xRJ45 port. Built-in Microphone. Alarm I/O. Intelligent Analytics: Video Analysis, Face Detection, People Counting. IP67-rated. including all leads and lifts as per direction of Engineer -in -charge.
426	Supply, Installation, Testing and Commissioning of 5MP AI 12X PTZ Bullet Network Camera. 12X Optical Zoom, minimum 12X Optical Zoom. PTZ Function with Pan Range: 360°, Tilt Range: -45°∼30°. Image Sensor: 1/2.8\\" Progressive Scan CMOS, 120dB WDR, S/N > 50dB. mage Resolution: 2592x1944, IR Distance: Up to 140m. Frame Rate: 30fps@(2592x1944), 60fps@(1920x1080, Secondary Stream, Tertiary Stream. Video Compression: H.265+/H.265(HEVC)/H.26 +/H.264/MJPEG. Video Bit Rate: 16Kbps∼16Mbps. Interface: Ethernet: 1xRJ45 port. Built-in audio I/O. Alarm I/O. Intelligent Analytics: Video Analysis, Face Detection, People Counting. IP66-rated for weather-resistant performance including all leads and lifts as per direction of Engineer -in -charge. .
427	Supply, Installation, Testing and Commissioning of 64-CH High Performance H.265 NVR , Network Video Input: 64-CH, Video Compression: H.265+/H.265(HEVC)/H.264+/H.264, Disk Array Type: RAID. SATA: 8xSATA HDD, 1xeSATA. Capacity: 10TB capacity. Bandwidth Requirement: 320Mbps. Output: 2-CH HDMI Output. 2-CH VGA Output. Dual Stream Support. Recording Resolution:12MP/8MP/6MP/ 5MP/4MP/3MP/1080P/ UXGA/720P/D1/VGA/CIF/QCIF. Network Interface 2x Gigabit Ethernet Ports. USB Interface. Audio Input/Output. Alarm Input/output. Video Analysis capabilities. Built in Transcoding features including all leads and lifts as per direction of Engineer -in -charge. .
428	Supply, Installation, Testing and Commissioning of Network Joystic control for PTZ Camera, Should Support Network connection for easy connection and control of NVR and PTZ cameras.Built-in Web Server to support the use of browser to easily manage and maintain the keyboard. Should support 4-axis variable speed joystickwith a LCD screen on operation panel to easily display operationsSupport to control up to 100 devices. Shortcut keys for PTZ control, such as preset, patrol and pattern. Shortcut keys for NVR control, such as snapshot and audio operation.Shortcut keys for recording and playback control, such as record, play, stop, pause, speed up and speed downShortcut keys for light control operation including all leads and lifts as per direction of Engineer -in -charge.
429	Supply, Installation, Testing and Commissioning of 48-Port Gigabit PoE+ Smart Switch and 4 SFP Ports, Auto Negotiation, Dynamic MAC address management, VLAN routing. IPv4 and IPv6-based QoS. Layer 3 static routing. PoE+ support, 4x SFP ports. Network Management features including all leads and lifts as per direction of Engineer -in -charge.
430	Supply, Installation, Testing and Commissioning of wifi 6, 802.11ax Dual band 2.4-GHz and 5-GHz wireless access Point, (Backward compatible to 802.11b/g/n/a/ac). Dual band 4x4 (2.4GHz and 5.0GHz) 8 streams of data for an aggregate throughput of up to 3.6Gbps. Enterprise security and Enhanced Open security, such as WAP3, WPA Enterprise, 8x SSID and VLAN1. Orthogonal Frequency Division Multiple Access. Should feature 2.5GbE port.Built in controller with Remote management including all leads and lifts as per direction of Engineer -in -charge. .
431	Supply, Installation, Testing and Commissioning of 24 Gigabit ports LAN Switch with L2 switching and L3 routing capabilities. 24-port 1000BASE-T (RJ45), 2-port 10GBASE-T (RJ45), 2-port 10GBASE-X (SFP+). 128 Gbps Switching capacity. Full IPv6 support with dual stack (IPv4 and IPv6), multicasting, and QoS, static routing and dynamic routing. Should have Network virtualization and segmentation. Should support network monitoring. Full L3 feature set and non-stop forwarding (NSF) stacking including all leads and lifts as per direction of Engineer -in -charge.
432	Supply, installation, testing and commissioning of Router/Security Appliance Stateful firewall, 1:1 NAT, DHCP, DMZ, static routing, Identity-based policies Auto VPN™ self-configuring site-to-site VPNClient VPN (IPsec)User and device quarantineVLAN support and DHCP services, Content filtering (Webroot BrightCloud CIPA-compliant URL database), Web search filtering (including Google and Bing SafeSearch), Intrusion prevention (SourceFire Snort based), Malware Protection including all leads and lifts as per direction of Engineer -in -charge. .
433	Supply, Installation, Testing and Commissioning of 12 Fiber LIU Loaded with Splice tray & pigtail, Cold rolled Steel body with Aluminum front & top cover for light mounting with powder coating.should support e both splices and terminations. Removable front and top covers including all leads and lifts as per direction of Engineer -in -charge.
434	Supply, installation, testing and commissioning of Cat6 Data Jack, Shuttered colour coded - User Side along with gangbox including all leads and lifts as per direction of Engineer -in -charge.
435	Supply, installation, testing and commissioning of Cat6 Data Jack, Shuttered - Rack Side, colour coded including all leads and lifts as per direction of Engineer -in -charge.
436	Supply, installation, testing and commissioning of Wall Plate, Single I/O - 86mmx86mm- White including all leads and lifts as per direction of Engineer -in -charge.
437	Supply, installation, testing and commissioning of 24 Port Data Patch Panel Un Loaded including all leads and lifts as per direction of Engineer -in -charge.
438	Supply, installation, testing and commissioning of standard Cat 6 Patch cord including all leads and lifts as per direction of Engineer -in -charge.
439	Supply, installation, testing and commissioning of Single 6 core OFC MM Armoured Cable including all leads and lifts as per direction of Engineer -in -charge.
440	Supply, installation, testing and commissioning of Cat6 UTP Cable Box (305 mtr) including all leads and lifts as per direction of Engineer -in -charge.
441	Supply, installation, testing and commissioning of 42U Equipment Rack, 800 x 1000mm. Lockable front glass door, cooling facility, internal wiring, front glass door, heat dessipation fans, movement wheels, power distribution units & equipment shelves as required, fully welded construction for strength. Extra-wide rackrail for cable pass-throughs to facilitate front-to-rear cabling including all leads and lifts as per direction of Engineer -in -charge.
442	HVAC Works- (Design, Engineering, Supply, Transportation, Installation, Testing & Commissioning )Design, engineering, supplying, installation, testing and commissioning of Variable Refrigerant Flow modular type air-conditioning system suitable for Cooling & Heating both by multiple scroll compressor controlled by individual inverter complete with indoor and outdoor units with individual wired and wireless/wired remote controller for indoor units and centralized controller, interconnecting refrigerant piping, full charge of refrigerant gas (R-410A) & oil, internal control cabling and fittings etc. as per details given in specifications and having following items. The out door units shall be suitable for 3 phase 4 wire system, 415V + 10 %, 50 Hz AC supply and indoor shall be suitable for Single phase 220-240V, 50 Hz AC supply. Make : ,O General,Hitachi,Trane, Mitsubishi Heavy Supply, installation, testing & commissioning of Modular type outdoor units equipped with highly efficient scroll compressors(OEM manufactured) fully inverter controlled i.e. changes its speed in accordance to the variation in cooling loads, special heat exchanger, low noise condenser fan, & including full charging of R-410A refrigerant gas complete i/c powder coating complete as per specifications. Out door units shall be provided with MS stand of suitable size duly painted with corision resistant paint suitable for outdoor application. The units shall be in combination of one or more units which shall be selected in such a way that EER of each unit at 100 % shall not be less than 3.4 and 50% part load shall not be less than 5.0 on standard operating conditions i.e on 35 Deg C DB Ambient and at 27 Deg CDB & 19 Deg CWB inside conditions. The units shall be suitable to operate upto 52 Deg C ambient conditions.All the units shall be provided with built-in microprocessor control panel, for automatic operation and capacity control,which should be air cool.Machines shall be suitable for working with BMS system.It is mandatory that each compressor shall have inverter technology separately i.e. outdoor units shall have all inverter based compressor.Compressor and machine should be of same OEM Following capacities of ODUs are at standard operating condition as defined above and Vendor to indicate COP at 100% load & at part loads i.e. 75% & 50% in the data sheets/ shop drawings:
443	08 HP
444	16 HP
445	32 HP
446	48 HP
447	Supply, Assembly, Erection, Testing and Commissioning of Ceiling Concealed Ductable Type Unit with fittings. Consisting of centrifugal fan, Three speed motor, coil section with DX coil, outer cabinet, filter, insulated drain pan, including all accessories. Cable from indoor unit to socket and headers etc.which shall be supplied by the OEM of VRV/VRF system. complete as required. Make : ,O General,Hitachi,TRANE, Mitsubishi Heavy or equivalent.
448	5.0 HP (MINIMUM CFM 1590 )
449	6.0 HP (MINIMUM CFM 1970 )
450	8.0 HP (MINIMUM CFM 2800)
451	10.0 HP (MINIMUM CFM 3300 )
452	12.0 HP (MINIMUM CFM 3700 )
453	Supply, Installation, Testing and Commissioning of Ceiling Mounted Type Treated Fresh air unit including all necessary fittings and accessories.16 HP 2200 CFM at 20 mm Static Pressure connected with VRF ODU including all leads and lifts as per direction of Engineer -in -charge .
454	Supply, installation, testing & commissioning of Touch Screen Type of LCD Screen Based Corded Remote Control for Duct Type IDU . This remote should have following operational mode display - Cooling / Heating /Dry Mode / Fan Mode & Auto Mode, air flow changing . The temperature setting should be varied on a interval of 0.5 degree C, also should have functions like daily timer , weekly timer , operation lock & main sub control . suitable for above indoor units to operate.The remote controller shall be suitable for wall mounting with bracket . Make : ,O General,Hitachi,TRANE, Mitsubishi Heavy or equivalent Wired Remote Controller
455	Supply, installation, testing & commissioning of IOT Based Central Controller capable of controlling of all IDUs, ODUs complete with necessary hardware, Software,accessories etc. IOT Based VRF Management Software which can be controlled from anywhere in the world & can be accessable through Smartphone , Tablet or PC . It should be connected with 16 Outdoor Unit + 80 Indoor Unit together with 1 system . The system should not have any yearly future licencing fees & the cost quoted should be for lifetime usage to perform the following functionsCentralized control Control your entire VRF system or selected zones with one touch.Adjust temperature, fan speed and modes Simplified troubleshooting A clear error history, concise error description and follow-up.Smartphone alerts In the event of a critical malfunction.flexible user management Add users and custom access restrictions,Intuitive scheduling Plan operations ahead based on business hours.Individual controller lock Prevent inappropriate usage from occupants
456	Supply, installation, testing & commissioning Refrigerant 'Y'Joint required for distribution of refrigerant in copper piping etc. complete as per specifications. Make : ,O General,Hitachi,Trane, Mitsubishi Heavy or equivalent.
457	Supplying & Installation of interconnecting following sizes of Refrigerant Copper Pipe work of following outer diameter, insulated with 19/13 mm thick aluminum laminated XLPE tubular insulation (between Each set of indoor & outdoor units to offset the impact of mechanical injury and scratch resistance for all pipes as per specification all piping inside the building shall be properly fixed/supported with suitable size of cable tray. Make : Rajco / Mandev / Maxflow or equivalent.
458	9.5 mm dia with 13mm thick insulation
459	12.7 mm dia with 13mm thick insulation
460	15.9 mm dia with 13mm thick insulation
461	19.1 mm dia with 13mm thick insulation
462	22.2 mm dia with 19mm thick insulation
463	25.4 mm dia with 19mm thick insulation
464	28.6 mm dia with 19mm thick insulation
465	31.75 mm dia with 19mm thick insulation
466	34.92 mm dia with 19mm thick insulation
467	38.92 mm dia with 19mm thick insulation
468	Providing & fixing control cum transmission wiring in medium duty PVC Conduit between indoor and outdoor unitsincluding all leads and lifts as per direction of Engineer -in -charge. Havells, Finolex, Lap or equivalent.
469	Additional Refrigerant charging R-410A of entire VRV system and commissioning. Make including all leads and lifts as per direction of Engineer -in -charge.: Duwpoint or equivalent.
470	Supply and Fixing in position the following PVC (suitable for minimum 10kg/sq cm working pressure) condensate drain pipe insulated with 9 mm thick closed cell nitrile rubber insulation including all leads and lifts as per direction of Engineer -in -charge. Make : Astral , Supreme, FINOLEX / ASHIRVAD or equivalent.
471	25 mm dia
472	32 mm dia
473	Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling /concrete flooring with G.I. suspenders/brackets including G.I. bolts & nuts, etc. as required.Cable Tray 40x 150x40 mm 1.6 mm Thick including all leads and lifts as per direction of Engineer -in -charge
474	Supply, installation, testing and commissioning of Site fabricated G.I. ducting along with vanes, splitter damper at each branch etc. as per specifications & drawings including support & gripple wire. including all leads and lifts as per direction of Engineer -in -charge. Make : Sail / Tata / Jindal (Hissar) or equivalent.
475	0.63 (24 Gauge)
476	0.80 (22 Gauge)
477	Supply & fixing of flexible canvass connections in supply air connections
478	Supply, installation, testing and commissioning of factory fabricated Round Shape Spiral G.I. ducting along with vanes, splitter damper at each branch etc. as per specifications & drawings including support & gripple wire. Make : WAVES / ECO DUCT or equivalent. including all leads and lifts as per direction of Engineer -in -charge
479	0.63 (24 Gauge)
480	0.80 (22 Gauge)
481	Supply & fixing of flexible canvass connections in supply air connections
482	Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class \\"O\\") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3mm thick self-adhesive nitrile rubber tape insulation complete as per specifications and as required including all leads and lifts as per direction of Engineer -in -charge . Make :- K Flex, A Felx, Supreme or equivalent.
483	Supply and fixing of acoustic lining of supply air duct and plenum with 13 mm thick Open Cell Insulation with 32kg/m³, complete as required and as per specifications including all leads and lifts as per direction of Engineer -in -charge . Make:-UP Twiga or equivalent.
484	Supplying, fixing testing commissioning of supply air grilles/ diffusers of powder coated aluminum without volume control dampers complete as required.as per approved shop floor drawings and including all leads and lifts as per direction of Engineer -in -charge Make:- Caryair, Airflow, Uniaire Equipment
485	Design, Engineering, Testing & Commissioning: Creation of Audio Visual Content with 3D and Motion Graphics in 4k resolution . 3D Animation would include Assets , backgrounds, Fx , Environments , Layouts & Rendeing . Motion Graphics Animation/Composition would include Parallax, Matte Paints , Environment , vector Graphics etc. Audio content with narration voice of male and female artists with min 5 years of expereince (non celebrity) with inclusion of SFX , BGM , final mix and Foly effects in 2 langauges.
486	Branding & Marketting of Museum as per following details:- design of visual identity adhering to the brand guidelines- creation of marketing and outreach strategy based on market research in line with best practices followed globally in rafting including all leads and lifts as per direction of Engineer -in -charge
487	Supply, installation, testing and commissioning of development, hosting & management of website & mobile application using illustrations & photography that are in line with the brand identity. Website & mobile application should have functionality but not limited to:- Genenral information about the complex (intriduction, timings, immersive centre, how to reach, etc)- Online ticket booking with admin panel- Gallery information in immersive centre- Feedback collection system including all leads and lifts as per direction of Engineer -in -charge
488	Supply, Installation, Testing & Commissioning of Software to receive Touch from the Touch panels and show content based on touch interaction including all leads and lifts as per direction of Engineer -in -charge
489	Supply, installation, testing and commissioning of 3D Projection mapping software, Playback control System to manage, schedule and all projector /Screen control the media severs. It should have direct control on inputs and media playback. It should have an option of being controlled by an external unit integrated with the software including all leads and lifts as per direction of Engineer -in -charge
490	Supply, installation, testing and commissioning of DLP Laser projector, 8000 ANSI Lumens, Native Resolution: WUXGA (1920 x 1200), Input resolution support: Upto 4K,Brightness Uniformity: 90% or more, Contrast: 300000:1 or more,Illumination Lifetime: 20000 hrs or more, Inbuilt Warping & Blending, Inputs: 2 x HDMI 2.0, 1 x DVI-D, 1 x HDbaseT, Certifications: CE, FCC Class A, BIS.Short throw lens of Throw ratio 0.65-0.75:1 or lower with motorised zoom & Motorised Focus including all leads and lifts as per direction of Engineer -in -charge
491	Supply, installation, testing and commissioning of DLP Laser projector, 10000 ANSI Lumens, Native Resolution: WUXGA (1920 x 1200), Input resolution support: Upto 4K,Brightness Uniformity: 90% or more, Contrast: 300000:1 or more,Illumination Lifetime: 20000 hrs or more, Inbuilt Warping & Blending, Inputs: 2 x HDMI 2.0, 1 x DVI-D, 1 x HDbaseT, Certifications: CE, FCC Class A, BIS.Short throw lens of Throw ratio 0.65-0.75:1 or lower with motorised zoom & Motorised Focus including all leads and lifts as per direction of Engineer -in -charge
492	Supplying, Installation, testing & commissioning of 55 inch LCD -Back Lit LED, Resolution 3840 x 2160 (UHD) or 4K,Built inTouch IR/Inglass/Capacitive/Incell, Brightness - 350 nits or Higher,Anti Glare Treatment on Surface, Input ports -HDMI(2),LAN Port (1),USB(1), Certificates -UL,CE, FCC,BIS with extension to connect touch & display interface to the server placed in server room.Price to be inclusive of accessories, mounting, cabling etc. as per entire satisfaction of the engineer-in-charge.
493	Supply installation and fixing of Audio / Dimmer Rack - 19 \\" - 42 U Rack, 600 mm wide with Aluminium frame and 1000 mm depth, top bottom side panel and rear door of CRCA Sheet size 1 mm, front door with Aluminium section and acrylic/glass sheets, with minimum specifications as specified in the tender including all leads and lifts as per direction of Engineer -in -charge
494	Supply, installation, testing and commissioning of Display media server with HD 4 outputs as required , synced together. It should be capable of capturing content. Original windows 10/11 embedded with i7 , Intel CPU 12900K, Chipset Z690 with Rugged cooling system. with 32GB RAM, RTX A4000 GFX, 2 nos 512 NVME drives raid drives for media playback , 1 nos. 256 GB NVME for operating. It should also have genlock and frame lock capability. Should also have Art-net Ethernet in/out. Along with server rack to complete the job with all respects including all leads and lifts as per direction of Engineer -in -charge
495	Supplying and , installation, including testing & commissioning of stainless steel electric water cooler four taps , 200 litter capacity of Alister make or equivalent with compressor : Emerson make or equivalent and in built purification system . Size L- 625mm,W-875mm and H- 1250mm. Net weight 64kg, single phase , 220 volts , 50 Hertz, Cooling Capacity 150 litre/Hour , Gross volume 200 litre Complete in all respect as per direction of Enginner incharge/ Project Manager including all leads and lifts as per direction of Engineer -in -charge .
496	Providing , installation, including testing & commissioning of overhead projector and projection sereen of approved brand and manufacture 5000 lumens laser projector XGA Resolution 20000 hours maintanence free model no. CVPL-CXZ-10, Make sony or equivalent. Screen (Winger or equivalent make 133 inches diagonal Motorized screen) along with relevant accessories and freight charges including all leads and lifts as per direction of Engineer -in -charge
497	Design, engineering, Supply installation testing and commission of 9d VR Rafting Simulator with VR Glasses , Net weight: 285kg Size: 1.82.31.5M Number of films: 1 drifting film Site requirements: 6 square meters Host configuration: 1 host CPU I5; graphics card 1060 Memory 8G SSD 120G, Includes electric system with boat simulator, control system, DPVR helmet and other safety equipment, control cabinet and computer as satisfaction of Engineer in Charge/Project Manager
498	Supply installation and fixing of Full range 4-inch or better IP55 rated surface mounted music loudspeaker. The louspeaker shall meet the following performance criteria: Frequency range (-10dB) of 70Hz to 19kHz; Power handling of 160 Watt peak; Nominal dispersion of 90°(H) × 80°(V); Sensitivity of 87 dB SPL and Max SPL of 109 dB SPL peak or better; Nominal impedence of 8 ohms and Integral multi-tap Transformer with selectable tap settings of 5/10/20/40W@70V & 100V. The loudspeaker system shall be enclosed in engineered-plastics and a powder-coated steel grille. UL-1480 rated and EN54-24 compliant for Life safety/VA applicatons including all leads and lifts as per direction of Engineer -in -charge .
499	Supply installation and fixing of Full range 4-inch or better IP55 rated surface mounted music loudspeaker. The louspeaker shall meet the following performance criteria: Frequency range (-10dB) of 70Hz to 19kHz; Power handling of 160 Watt peak; Nominal dispersion of 90°(H) × 80°(V); Sensitivity of 87 dB SPL and Max SPL of 109 dB SPL peak or better; Nominal impedence of 8 ohms and Integral multi-tap Transformer with selectable tap settings of 5/10/20/40W@70V & 100V. The loudspeaker system shall be enclosed in engineered-plastics and a powder-coated steel grille. UL-1480 rated and EN54-24 compliant for Life safety/VA applicatons including all leads and lifts as per direction of Engineer -in -charge .
500	Supply, installation, testing & commissioning of Full Range Ceiling Speaker Drivers : 1 x 2 to 4\\" driver, Frequency response : 85Hz - 18KHz, Dispersion Angle : 125-degree conical angle, Power Handling : 20 Watt (80-Watt Peak), Sensitivity @ 1W/1m : 86 dB SPL, Maximum SPL @ 1m : 104 dB peak SPL, Nominal Impedance : 8 / 16 Ohm, transformer taps of 16W or better @100V. Enclosure : Steel formed Backcan, Grille : Power coated steel grille, Certifications : EN54-24, UL 1480/UL94/UL2043 including all leads and lifts as per direction of Engineer -in -charge

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents
6	Click here to download tender document	Tender Documents
7	Click here to download tender document	Tender Documents
8	Click here to download tender document	Tender Documents
9	Click here to download tender document	Tender Documents
10	Click here to download tender document	Tender Documents

Also Visit

Tenders

Himachal Pradesh Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Rafting Complex And Way Side Amenities At Nadaun, District: Hamirpur(H.P) (Sh: Civil Works, Ws & Si, Ei, Hvac,Fire Fighting & Alarm System, Surveillance System And Drive In Cinema Etc.), Hamirpur-Himachal Pradesh

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Rafting Complex And Way Side Amenities At Nadaun, District: Hamirpur(H.P) (Sh: Civil Works, Ws & Si, Ei, Hvac,Fire Fighting & Alarm System, Surveillance System And Drive In Cinema Etc.), Hamirpur-Himachal Pradesh

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us