|
| 1 | Complete removal of existing water proofing roof treatment of any description incl under layer, taking down of cement plaster of any thickness and removal of debris from site to a place outside defence land as specified by civil authorities and clean the surface of roof with water and remove dust complete all as specified and as directed. |
| 2 | Cleaning of the exposed concrete slab and repairing the surface irregularities like cracks, potholes, as per manufacturers method statement by HS Rapair(or equivalent)along with HS Latex Plus(or equivalent)& cement in mixing ratio of 1:4 where ever required complete all as specified and as directed. |
| 3 | Demolition of Concrete in any description andin any position but n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 4 | Providing cement concrete type B-0 1:2:4 (using 12.5 mm graded stone aggregate ) in roof padding (up to 4 Storey Bldg), roof kerbs or mud stops, rounded or chamfered on edges finished even and smooth without using extra cement . complete all as specified and as directed.. |
| 5 | M & L for applying cement slurry over existing roof surface @ 3 Kg/Sqm incl mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and as directed. |
| 6 | M&L 15mm thick rendering in cement mortar 1:4 (up to 4 Storey Bldg) over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and as directed. (Note : Water proofing liquid shall be measured and paid separately) |
| 7 | Supply Integral water proofing Liquid of Dr fixit/sika/Fosroc complete all as specified and as directed. |
| 8 | One component liquid ,solvent free ,cold applied , water-proofing membrane that is highly elastic and UV resistant with 10 years Warranty. ASTM D 6083-97a Waterproofing and heat reflecting system having following key performance properties. (i) UV resistant, prevent yellowing and weathering. (ii) Highly elastic upto 350% and crack bridging. (iii) Excellent adhesion on porous and non-porous substrates. (iv) Tensile Strength >10 N/Sqmm with GeoTextile fleece. (v) Solar Reflective Index (SRI) more then 109-111 ASTM E1980-11. System : First coat : Providing and applying primer over the prepared surface with HS PU roofkoat Primer(or equivalent), Coverage : 0.2Kg/Sqm (with 50% dilution of water), Reinforcement: Geotextile 40 gsm, Second coat:Home sheild roofkoat (or equivalent), Consumption: 0.5 Kg/Sqm, Third coat: HS PU roofkoat (or equivalent), Consumption : 0.8 Kg/Sqm. System buildup -1.5Kg/Sqm with geotextile of 40gsm |
| 9 | M&L for plain cement concrete type B-1, 1:2:4(using 20mm graded aggregate) as in coping ,benching and surface channel complete all as specified and as directed. |
| 10 | Providing precast reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast cover slabs etc, (up to 4 Storey Bldg) design approved by Engr In Charge as per site requirement complete all as specified and as directed. |
| 11 | S&F rotational moulded polethylene water tank of 1000 ltrs capacity, ISI Marked (cylindrical vertical with closed top with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacity not exc 1000 ltr complete all as specified and as directed. |
| 12 | S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 13 | S&F GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including cutting chasing and taking down existing GI tubing 15 mm dia & connections complete all as specified and as directed. |
| 14 | S&F GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 20 mm dia & connections complete all as specified and as directed. |
| 15 | S&F Vitreous China counter top oval type white colour wash basin of size 560x400x250mm including bottle trap ,waste pipe fixing on counter complete all as specified and as directed. |
| 16 | S&F 15mm dia CP brass wall mixer with 03 in 1 wall mixture with hand shower and head shower with 1.5 Mtrs flexible tube and crutch (quarter turn) for mixing hot & cold water screwed down for iron pipe Including necessary fitting complete all as specified and as directed. |
| 17 | S&F 15mm dia CP brass Wash basin mixer long body swan neck type for mixing hot & cold water screwed down for iron pipe including necessary fitting complete all as specified and as directed. |
| 18 | S & F in repair fancy type 150mm size square brass CP shower rose with 450mm long shower arms complete all as specified and as directed. |
| 19 | S&F in repairs 15 mm dia bib tap long Body fancy type chromium plated with flange quarter turn complete all as specified and as directed. |
| 20 | S&F fancy type chromium plated brass two way bib cock suitable for 15mm bore pipe complete all as specified and directed. 2 Way Bib Cock with Wall Flange complete all as specified and as directed. |
| 21 | S&F in repair stainless steel tubular towel ring rectangalur type (8x5 Inch) including apair of CP brass bracket complete all as specified and as directed. |
| 22 | S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and as directed. |
| 23 | S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm , complete all as specified and as directed. |
| 24 | S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and as directed. |
| 25 | S & F fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and as directed. |
| 26 | S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 27 | S & F in repairs Rimless Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings,Size: 360x675x750 mm, S Trap-300 mm including making good to floor complete all as specified and as directed. |
| 28 | S&F vitreous china squatting pan of orrissa pattern size 580 x 440 mm white with \\"P\\"or \\"S\\" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified and as directed. |
| 29 | S&F vitreous china wash down water closet pan (Pedestal pattern) white,(excluding flushing cistern and pipe) including PVC Seat cover for EWC pan (White ) of standard quality including hinges bolt, complete all as specified and as directed. |
| 30 | S&F in repairs vitreous chinaware white wash hand basin with pedestal of flat back of size 55X45x20cm with full pedstal of height 82 cm complete including fancy CP pillar tap swan nack, CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specified and as directed. |
| 31 | S&F PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and as directed. |
| 32 | S&F fancy type brass chromium plated toilet paper holder, complete all as specified.Make hindware or equivalent complete all as specified and as directed. |
| 33 | S&F Viterous China urinals incl fish eye , bowl type (back to corner wall type), complete including providing and fixing plus, beding urinal agianst wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing aroiund urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipee. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) large size 590X390X 375 mm including Waste pipe complete all as specified and as directed. |
| 34 | S & F CP health faucet with 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body complete all as specified and as directed. |
| 35 | S&F in repair PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and as directed. |
| 36 | S&F in repair PVC (SWR) floor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and as directed. |
| 37 | S&F in repair PVC (SWR) 150mm bore pipes single socketed in any length with rubber ring joints included fixed to wall and floor and cutting hole in brick/concrete and fixed with flat iron 2mm thick 30mm wide 2 mtr centre to centre complete all as specified and as directed. |
| 38 | S&F PVC (SWR) 150mm bore bends with access door any radius complete all as specified and as directed. |
| 39 | Supply and fixing, UPVC(SWR) , shoes bends for 150 mm bore complete all as specified and as directed. |
| 40 | Supply and fixing UPVC(SWR) type B pipes 75 mm bore single socketed, in any length with rubber ring joints fixed to walls and laying to floor including stack clamp of GI flat 30 mm wide 2 mm thick (having 100 mm clear space from wall) fixed to wall with nails at the spacing of 1.5 mtr centre to centre complete all as specified and as directed. |
| 41 | Supply and fixing UPVC (SWR) type B pipes 110 mm bore single socketed, in any length with rubber ring joints fixed to walls including stack clamp of GI flat 30 mm wide 2 mm thick (having 100 mm clear space from wall) fixed to wall with nails at the spacing of 1.5 mtr centre to centre , complete all as specified and as directed. |
| 42 | S&F PVC (SWR) 110mm bore bends with eccess door any radius complete all as specified and as directed. |
| 43 | S&F PVC (SWR) 75mm bore bends with access door any radius complete all as specified and as directed. |
| 44 | S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and as directed. |
| 45 | S&F PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and as directed. |
| 46 | S&F UPVC(SWR), junction single, (single reducer 'T') equal or unequal for 110mm x75 mm bore , complete all as specified and as directed. |
| 47 | S&F UPVC (SWR) vent cowl 75 mm dia complete all as specified and as directed. |
| 48 | S&F UPVC (SWR) vent cowl 110 mm dia complete all as specified and as directed. |
| 49 | S&F designed looking mirror size exc 0.54 sqm to 0.75 sqm of selected quality 6mm thick glass, mounted on fixed to wall with CP plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 50 | S & F PTMT alloy toilet cabinet with mirror of overall size 350 x 450mm and fixed to wall complete all as specified and as directed. |
| 51 | S & F S/S towel hanger with minimum 06 Hooks and fixed to wall/door complete all as specified and as directed. |
| 52 | S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge and for every 01 RM length, with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings) complete all as specified and as directed. |
| 53 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 54 | M & L 25 mm thick PCC 1:2:4 type B0, using 12.5mm graded aggregate as in floors to receive surface of tile complete all as specified and as directed. |
| 55 | M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 56 | M & L Glazed ceramic coloured tiles (square/ rectangular) in vertical surface 300x600 x 7mm thick set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the surface incl 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.Note : Engr-in-Charge will select sample from latest catalouge. |
| 57 | M&L 18-20 mm thick Granite of any colour (tablee rubbed and polished) as in windows cill & cooking platforms and Incl cement mortar (1:4) and form work , pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing at edge complete all as specified and as directed. |
| 58 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed. |
| 59 | M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and as directed. |
| 60 | M&L for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed. |
| 61 | Demolition of reinfocement cement concrete of any description and in any position complete all as specified and as directed. |
| 62 | M&L for RCC 1:2:4 type B-1(Nominal Mix)(using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs,shelves etc complete all as specified and as directed. |
| 63 | S&F Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 64 | M&L form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but not exc 20cm wide for rough finished surfaces of concrete, complete all as specified and as directed. |
| 65 | Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified and as directed. |
| 66 | Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and as directed. |
| 67 | M&L 15mm thick rendering in cement mortar 1:4 to on brick masonary wall surfaces (up to 4 Storey Bldg) or on other than fair faces of brick masonary fair finished without using extra cement complete all as specified and as directed. |
| 68 | M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and as directed. |
| 69 | M&L rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and as directed. |
| 70 | M&L for capillary rise treatment of walls,Base coat: HS Latex plus(or equivalent)Consumption base coat: 0.3 kg/m2Second and Third coat: Latex sheild 2K(or equivalent)Consumption top coat: 3 kg/m2System requirements: density: 2.00 kg/ltr;compressive strength: 0.5 N/mm2. complete all as specified and as directed. |
| 71 | Glass fibre reinforced modified cementitious coating system before the final coat of (or equivalent) in Sunken treatemen. Base coat : (or equivalent), Consumption base coat : 0.3 Kg/Sqm, Reinforcement : Glass fiber, Second and Third coat :(or equivalent), Consumption top coat: 3 Kg/Sqm, System requirements : density: 2.00 Kg/Ltr, Compressive strength : 0.5 N/Sqmm. (i) Wall penetration through the RCC slab must be sealed using Berger HS Repir (or equivalent). (ii) Intersection of base slab with wall must be provided with a 50 mm fillet using Berger HS Latex plus(or equivalent) modified mortar with a bonding coat of Berger HS Latexplus (or equivalent) modified cement slurry upto 1.5 Mtr. (iii) All depressions, unevenness, surface honeycombing shall be repaired using Berger HS Latex plus(or equivalent) modified polymer mortar with a bonding coat of Berger HS latex plus (or equivalent) modified cement slurry, including cleaning of RCC surface to remove dust, loose particles, etc with compressed air or any other suitable technique depending on site conditions, grinding any sharp edges, etc |
| 72 | M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 with water proofing compound tobe finished even and smooth without using extra cement complete all as specified and as directed. |
| 73 | S&F 32 mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in as spout pipes to pour out residual water out from the treated area complete all as specified and as directed. |
| 74 | M&L for hard core, of broken bricks broken to gauge n exc 63mm for laying sub base of thickness 150mm complete all as specified and as directed. |
| 75 | Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and as directed. |
| 76 | Taking down and refixing in same opening chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame)e complete all as specified and as directed. |
| 77 | S & F of factory made single extruded WPC (wood polymer Composite) solid door frame/chowkhat of size 75x50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade) calcium carbonate and natural fibers and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with fullbody threaded star headed SS Screw having minimum frame density of 750 kg/cum screw withdrawal strength of 2200 N (Face) &1100 N (Edge) minimum compressive strength of 58 N/Sqmm modules of elasticity 900N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant Note: For WPC solid door frame,minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable variation on profile dimension plus side shall be acceptable but no extra payment on this account shall be made |
| 78 | S & F of factory made single extruded WPC (wood polymer Composite) solid plain flush door shutter of 30 mm size. comprising of virgin PVC polymer of K value 58-60 (Suspension Grade) calcium carbonate and natural fibers and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum screw withdrawal strength of 1800 N (Face) &900 N (Edge) minimum compressive strength of 50 N/Sqmm modules of elasticity 850N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant Note: For WPC solid doorshutter,minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable variation on profile dimension plus side shall be acceptable but no extra payment on this account shall be made |
| 79 | Material & labour aluminium ventilator section size (65x38mm) fixed type, incl figured glass at bottom and s/s wire mesh cloth at top complete all as specified and as directed. |
| 80 | S&F partition wall and fixed ventilator of powder coated aluminium hollow sections members of size 63.50 mm x38mmx 1.48 mm thick with distance of vertical hollow section, 1.2mtr to 1.8 mtr height of wall having top rails, bottom rails and middle rail of size 63.50 mm x 38mm x 1.48 mm and upto middle rail wall panels shall be covered by 5 mm thick aluminium composite panel LDPE core PET coating (both side decorative type) with aluminium clip height of middle rail shall be 1 meter from floor and remaining portion above middle rail shall be provided with 5 mm thick glass incl eaching approved designed with aluminium stiprs/beadings with rubber gasket as per existing or as provided complete all as specified and as directed. |
| 81 | S&F 100 mm size butt hinges medium weight stailess steel colled rolled complete all as specified and as directed. |
| 82 | S & F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 83 | S&F 150 mm size aluminium handles, cast type anodised complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 84 | S&F 150 mm size aluminium handles, cast type anodised complete all as specified and as directed. Please Enable Macros to View BoQ information |
