Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-charges. |
| 2 | M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed by Engr-in-charges. |
| 3 | All as per item No 2 above but except stone complete all as specified and directed by Engr-in-charges. |
| 4 | M&L PCC solid building blocks 10 cm thick type B1 1:2:4 set in cement mortar (1:6) complete all as specified and directed by Engr-in-charges. |
| 5 | Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete to squared rubble walling, regular coursed, Jodhpur type complete all as specified and directed by Engr-in-charges. |
| 6 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engr-in-charges. |
| 7 | M&L for 25mm thick cement concrete type B-0 1:2:4 as in subbase of floor tiles (using 12.5 mm graded crushed stone aggregate) complete all as specified and directed by Engr-in-charges. |
| 8 | Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exc 0.18 Sqm but not exceeding 0.38 sqm, as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 9 | All as per above 8 but as in skirting including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engr-in-charges. |
| 10 | Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 11 | Material and labour for Glazed ceramic coloured tiles of size 350mmx 250mm / 450mmX 350mm/ 450mmX 300mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick (Av thickness) bedding layer (rendering) in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Demolition stone/marble slabs of any description or thickness as in floors/ cooking platform /steps etc. laid bedded and pointed in any mortar including removing rubbish material from the site complete all as specified and as directed by Engineer-in-charge |
| 13 | Material and Labour for 18-20 mm thick Kota stone slab as in flooring, shelves etc mirror polished laid over with and including 15 mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry @ 3 Kg/ Square Metre mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed by Engineer-in- charge. |
| 14 | Material and Labour for machine cut kota stone slab as in vertical surfaces, 18-20 mm thick laid over with and including 10 mm thick rendering in CM 1:4 laid and jointed with grey cement slurry @ 3 Kg/ Square Metre mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed by Engineer-in- charge. |
| 15 | Material and labour 18-20mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, cooking plate form Metre , steps, jambs,pillars, window cills, , shelves, urinal partition and like , including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement (1:2) using marble dust with admiture of pigment to match with shade of granite stone slab including cutting as required including cleaning and extra polishing if required complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 17 | M&L for 10mm thick rendering in cement mortar 1:4 on concrete ceiling surfaces / sunsheds / facia / RCC chajja, finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-charges. Note -Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures. |
| 18 | M&L for 15 mm thick rendering CM (1:4) over stone masonary surfaces finished even & smooth without using extra cement complete all as specified and directed by Engr-in-charges. |
| 19 | M&L for 15mm thick rendering in CM 1:6 finished even and smooth without using extra cement on stone wall surface complete all as specified and directed by Engr-in-charges. |
| 20 | Racking out joints/pointing to Square rubble masonry Jodhpur type regular coursed built in cement mortar complete all as specified and directed by Engr-in-charges. |
| 21 | M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 complete all as specified and directed by Engr-in-charges. |
| 22 | M&L for applying acrylic wall care putty on internal and external surfaces of walls/ceilings (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior painting complete all as specified and directed by Engr-in-charges. |
| 23 | M&L for applying three coats of white wash on newly plastered surface of ceiling including preparation of serfaces complete all as specified and directed by Engr-in-charges. |
| 24 | M&L for applying one coats of white wash on old surface of ceiling complete all as specified and directed by Engr-in-charges. |
| 25 | M&L preperartion of newly plastered surfaces on wall and applying one coat of wall putty with fair finished and even surface and applying two coat of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed by Engr-in-charges. |
| 26 | M&L for complete removal of existing distempered surfaces of walls and applying two coats of oil emulsion distemper of white shade or other approved shade over two coat of birla white putti on plastered surface complete all as specified and directed by Engr-in-charges. |
| 27 | M&L for applying two coats of cement based paint on newly plastered/ unplastered surface of wall including preparation and one coat of chalk white of serfaces complete all as specified and directed by Engr-in-charges. |
| 28 | M&L for applying two coat of cement base paint on old surfaces including preparation complete all as specified and directed by Engr-in-charges. |
| 29 | Taking down chowkhats or frames with shutters of PVC door , wooden window , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area not exceeding 1.50 Square Metre each complete all as specified and as directed by Engineer-in- charge. |
| 30 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame /Chowkhat of Size 45mmx85mm comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvent cement and screwed with full body threaded star headed SS screws having minimum density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N / MM2 modulus of elasticity 900 N/MM2 and resisitence to spread of flame of class A cat with property of being teRunning Metreite / borer proof , water moisture proof and fire retardant and fixed in position With MS hold Fast /SS Dash Fastner incl S&F (03 Nos Per Frame ) 100 mm long SS Butt Hinges complete all as specified and directed by Engr-in-charges. |
| 31 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /MM2 and resisitence to spread of flame of class A cat with property of being teRunning Metreite / borer proof , water moistur proof and fire retaident and fixing and incl S&F of 02 Nos (per Leaf) SS 150mm long Tower Bolt and S&F of 02 Nos (per Leaf) SS 150mm long handle complete all as specified and directed by Engr-in-charges. |
| 32 | Taking down chowkhats or frames with shutters of PVC door ,wooden door shutter, wooden window , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area exceeding 1.50 Square Metre but not exceeding 4.00 Square Metre each complete all as specified and as directed by Engineer-in- charge. |
| 33 | Taking down shutter of any description, exc.1 Sqm but n exc 2 Sqm each complete all as specified and directed by Engr-in-charges. |
| 34 | S&F for Prelaminated with sunmica Flush shutters 35 mm thick, solid core construction and plywood face is covered with decorative face veneer with lipping frame edging to match with mortic lock and handle complete all as specified and directed by Engr-in-charges. |
| 35 | S&F for (a) of 2nd class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-charges.(b) SS wire cloth 0.36mm nominal dia of wire, average width of aperture 1.40mm fixed with SS wire staple.(c) Aluminium Grill Medium grade mess size 50x50mmx5mm , fixed at outer edge at outer edge of door.(d) Apply one coat of Pink-Primer |
| 36 | M & L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors and frame ; ladders; framed balusters; walk ways; railings; framework of water tanks, hold fast and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-charges. |
| 37 | S&F of aluminium anodized tower bolt of size 200 mm long incl necessary screw complete all as specified and directed by Engr-in-charges. |
| 38 | S&F for aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed by Engr-in-charges. |
| 39 | S &F of mild steel butt hinges 100 mm size medium weight cold rolled complete all as specified and directed by Engr-in-charges. |
| 40 | S&F Mild steel 100mm size single action door spring hinge with steel wire spring enamelled black complete all as specified and directed by Engr-in-charges. |
| 41 | S&F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 140mm long complete all as specified and directed by Engr-in-charges. |
| 42 | M&L for applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed by Engr-in-charges. |
| 43 | S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified with or without cooler opening complete all as specified and directed by Engr-in-charges. |
| 44 | S&F Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified. (with or without cooler opening complete all as specified and directed by Engr-in-charges. |
| 45 | S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed by Engr-in-charges. |
| 46 | S&F Factory made box type steel ventilator without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed by Engr-in-charges. |
| 47 | S&F for 4 mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty complete all as specified and directed by Engr-in-charges. |
| 48 | S&F for 4 mm thick plain glass ordinary quality & glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-charges. |
| 49 | S&F for galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm complete all as specified and directed by Engr-in-charges. |
| 50 | M & L for mild steel framed work as in brackets etc for coller stands etc framed steps/stairs etc complete using MS angle iron Steel bars gusset plate etc conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-charges. |
| 51 | M&L for PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate for fixing hold fast coping, chamfered edges including necessary form work complete all as specified and directed by Engr-in-charges. |
| 52 | M&L for applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of new surfaces complete all as specified and directed by Engr-in-charges. |
| 53 | M&L for UPVC Caoted Celuka printed in one of two different colours( with wood grain printed pattern /ivory clour finish) polyvinyl chloride (PVC) sheet frame of width 150mm & 18mm thickness made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 3 Nos. of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc, all as per manufracturers specifications, complete all as specified and directed by Engr-in-charges. |
| 54 | M&L for 18 mm thick solid PVC sheet UPVC Caoted Celuka printed in one of two different colours( with wood grain printed pattern /ivory clour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc complete all as specified and directed by Engr-in-charges. |
| 55 | S&F 30 mm width of flaps continious piano hinges, stainless steel, complete assembly complete all as specified and directed by Engr-in-charges. |
| 56 | M&L for Extra over solid PVC sheet for fixing 18 mm width & 2-3 mm thick PVC coloured lipping of approved design & colour fixed with solvent cement or headless nails, complete all as specified and directed by Engr-in-charges. |
| 57 | S&F '0' degree clip type self closing MS hinges for cabinets fixed with cadimum coated screws, complete all as specified and directed by Engr-in-charges. |
| 58 | S&F 75mm size bright finished cromium plated brass handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint drawers complete all as specified and directed by Engr-in-charges. |
| 59 | S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as specified and directed by Engr-in-charges. |
| 60 | S&F stainless steel drawer runners folding type with guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers. complete all as specified and directed by Engr-in-charges. |
| 61 | M&L for stainless steel tray as per trade pattern of various sizes for drawer to keep the kitchen utensil complete all as specified and directed by Engr-in-charges. |
| 62 | Supply and fixing in replacement 19mm internal dia stainless steel drapery rod (Curtain Rod) of approved make including fenials and brackets for door and window complete all as specified and directed by Engr-in-Charge |
| 63 | S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden cleats (Min weight 300 gms) complete all as specified and directed by Engr-in-charges. |
| 64 | Supply & fixing in replacement brass chromium plated tubular towel rail 20mm dia 'D' type, 600mm long between flanges fixed to plug , bracket with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge. |
| 65 | S&F 600x450mm bevelled edge Looking mirror of selected quality glass mounted on PVC frame fixed to wooden plugs with chromium plated brass screws and cup washres complete all as specified and directed by Engr-in-charges. |
| 66 | S&F in repair sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or fixing in RCC slab and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge |
| 67 | S&F Stainless steel Plate Racks made of stainless steel 0.60 mm thick with plugs, washers and fixed with bolts /screws of size 750 X 600 X 250 mm as in repair complete all as specified and directed by Engr-in-charges. |
| 68 | S&F as in repairs of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPE pipe etc complete all as specified and directed by Engr-in-charges. |
| 69 | Supply & fixing in repair vitreous china wash down water closet pan (pedestal pattern, EWC) P Trap white clour (excluding flushing cistern and flush pipe) including connection to drain etc., including plastic water closet seat with cover (white clour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel chromium plated jet spray /health faucet with 01 mtr long PVC pipe with CP connector and necessary nut bolts and with necessary CP screws and plug for fixing WC complete all as specified and as directed by Engineer-in-charge. |
| 70 | Supply and fixing in replacement 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float, handle including brackets and 32mm dia PVC flush pipe and PVC connection 15mm size 450mm long with PTMT nuts complete all as specified and directed by Engineer-in-Charge. |
| 71 | S&F wash hand basin of size 550 x 400 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed by Engr-in-charges. |
| 72 | S&F 100 mm dia Cast soil waste and vent pipes (sand cast) in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed by Engr-in-charges. |
| 73 | S&F 75 mm dia Cast soil waste and vent pipes (sand cast) in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed by Engr-in-charges. |
| 74 | S&F 100 mm dia Cast soil waste and vent pipes (sand cast) in any length with or without ears with cement joints fixed on wall complete all as specified and directed by Engr-in-charges. |
| 75 | S&F 75 mm dia Cast soil waste and vent pipes (sand cast) in any length with or without ears with cement joints fixed on wall complete all as specified and directed by Engr-in-charges. |
| 76 | S&F100 mm CI branch pieces single socketed Y equal or unequal complete all as specified and directed by Engr-in-charges. |
| 77 | S&F75 mm CI branch pieces single socketed Y equal or unequal complete all as specified and directed by Engr-in-charges. |
| 78 | S&F100mm CI bends any radius complete all as specified and directed by Engr-in-charges. |
| 79 | S&F 75 mm dia CI bend with oval acess door fixed to pipe complete all as specified and directed by Engr-in-charges. |
| 80 | S&F 100mm dia CI vent cowl fixed to pipe complete all as specified and directed by Engr-in-charges. |
| 81 | S&F 75 mm dia CI floor trap plain grating including jointing with solvent cement 75mm dia complete all as specified and directed by Engr-in-charges. |
| 82 | M&L in repair for salt glazed stone ware gully traps,square moulded 150x150mm size, type P fixed complete all as specified and directed by Engr-in-charges. |
| 83 | Supply and fixing in replacement stop valve/angle valve cast copper alloy, chromium plated fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends suitable for 15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight of stop valve/stop cock/angle valve shall be as given in SSR or in relevant IS. |
| 84 | S& F as in repairs chromium plated Wall mixture 3-in-1 system fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure pipe 15mm bore, Hot or Cold, screwed for iron pipe with adujstable wall flange and legs complete all as specified and directed by Engr-in-charges. |
| 85 | S&F as in repairs 15mm bore CP central hole basin mixer popup waste system with 450mm long copper pipe and brass nuts ISI Marked complete all as specified and directed by Engr-in-charges. |
| 86 | Supply & fixing in replacement cromium plated shower rose 125mm size, with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-charge. |
| 87 | Supply and fixing in replacement bib tap long body cast copper alloy, chromium plated fancy type, with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS. |
| 88 | M&L for 100 thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in water tank plateform over roof top finished even and smooth complete all as specified and directed by Engr-in-charges. |
| 89 | Supply and fixing in replacement 1000 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories including 40mm overflow pipe including necessry hanging arrngement of overflow pipe upto ouside of parapet wall complete all as specified and as directed by Engineer-in-charge. Note: Ball valve valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball 20 mm bore shall be measured and paid seperately as supply and fixing under appropriate item of Schedule 'A' BoQ. |
| 90 | Supply and Fixing in replacement Ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 20mm-210 gram) complete all as specified and as directed by Engineer-in- charge. |
| 91 | Supply & fixing in replacement Gun metal, globe or 20mm bore gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge. |
| 92 | Supply & fixing in replacement Gun metal, globe or 25mm bore gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge. |
| 93 | Supply only Integral water proofing compund complete all as specified and directed by Engr-in-charges. |
| 94 | Demiolition of reinforced cement concrete of as staircase, landing, chajjas and similar suspended work of any description and any position not otherwise complete all as specified and directed by Engr-in-charges. |
| 95 | M & L for RCC design mix M-25 using 20 mm graded stone aggregate as in slab supported on wall, roof slab, chijja and in shelve, manhole cover etc complete all as specified and directed by Engr-in-charges. |
| 96 | Use and waste of formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works fair finished surfaces of concrete complete all as specified and directed by Engr-in-charges. |
| 97 | S & F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed by Engr-in-charges. |
| 98 | M&L for 7.5cms thick machine cut Sand stone slabs in sunshades, chajjas, shelves, cills, landings, manhole cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4, complete complete all as specified and directed by Engr-in-charges. |
| 99 | M&L for 30 mm thick guniting in patches on to the required area on RCC columns, beams, stairs, lintels, retaining walls, sunshades, roofing slab etc. of all sizes and shapes at any heights from existing ground floor and at any locations with cement and mortar 1:2 (1 cement : 2 sand) under 2 to 2.8 Kg/Cm2 pressure after removing the damaged loose spalt concrete as specified here in before and applying one coat of rust convertor/kp-100 equivalent grade over reinforcement wherever necessary providing and tying in position 25mmx25mmx12 gauge dia wire MS welded mesh or smaller size over treated surface ready to receive grouts, curing for 10 days etc,loose spalt concrete portions by chipping, removal of dust over treated surface and applying 5mm to 10mm thick plastering in CM 1:4 to match existing surfaces and finished even and smooth including curing for 10 days etc, and removing the debris out side the MOD land in low lying areas and leveling complete all as specified and directed by Engr-in-charges. |
| 100 | Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charges. |
| 101 | M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base flooring, path and foundation filling & mass concrete etc complete all as specified and directed by Engr-in-charges. |
| 102 | M&L 50mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, without using extra cement including cutting of joints n.exc 3.0 mtr length complete all as specified and directed by Engr-in-charges. |
| 103 | M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engr-in-charges. |
| 104 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engr-in-charges. |
| 105 | Demolition of cement concrete reinforced (inc reinforcement cut required to facilitate demolition) Roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work of any description and any position not otherwise specifically provided for and removal of debris outside of MOD land complete all as specified and directed by Engr-in-charges. |
| 106 | use and waste of Formwork to edges of concrete flats, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for achieving fair finished surfaces flat concrete complete all as specified and directed by Engr-in-charges. |
| 107 | M&L RCC M-25 (design mix) using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engr-in-charges. |
| 108 | M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including M&L 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed by Engr-in-charges. |
| 109 | All as per item 108 here-in-above but in dado/skirting set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles over 10 mm thick rendering in CM1:3 over stone masonry surfaces & finished even & rough to receive tiles. complete all as specified and directed by Engr-in-charges. |
| 110 | M&L for non-skid colour ceramic tiles joint less 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm over screed or bedding layer mortar 15mm thick for laying floor finishes in CM 1:4 in floors complete all as specified and directed by Engr-in-charges. |
| 111 | M&L for glazed colour ceramic tiles of size 450x300x7mm, laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles over 10 mm thick rendering in CM1:3 over stone masonry surfaces & finished even & rough to receive tiles. complete all as specified and directed by Engr-in-charges. |
| 112 | M&L for laying 50 mm thick Machine cut sand stone slabs as in Plinth protections laid over and including 20 mm thick cement sand screed in CM1:4 over 50 mm thick PCC 1:4:8 D2 all as specified and directed incl filling the joints of sand stone slabs with neat cement mixed with pigment to match the shade of slabs complete all as specified & directed by Engineer-in-charge. |
| 113 | M&L for 5mm thick rendering in CM 1:3 finished even and smooth without extra cement on Ceilings complete all as specified and directed by Engr-in-charges. |
| 114 | M&L for preparing surfaces plastered or unplasterd on new surfaces with 2 coats of Oil Bound distemper on Ceilings finished to a even and smooth finish complete all as specified and directed by Engr-in-charges. |
| 115 | M&L for preparing surfaces plastered or unplasterd on new surfaces applying 2 coats of Oil Bound distemper over 2mm thick wall putty finished to a even and smooth finish over a coat of alkali primer complete all as specified and directed by Engr-in-charges. |
| 116 | M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified & directed by Engineer-in-charge. |
| 117 | S & F in repairs vitreous china ware wash hand basin, white, flat back of size 300 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 450mm long screwed for iron pipe complete all as specified and directed by Engr-in-charges. |
| 118 | S & F as in repairs vitreous china wash down water closet European Type pedestal pattern with seat & cover as in repairs with jet spray complete incl fixing of flush pipe etc complete all as specified and directed by Engr-in-charges. |
| 119 | Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)& 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engr-in-charges. |
| 120 | S&F 15mm bore chromium plated bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-charges. |
| 121 | S&F pillar tap, brass, 15mm dia, with capston heads, chromium plated, fancy type screwed down, high pressure, with or without lettered hot or cold, with long shank, screwed shanks and fly nuts, screwed for iron pipes or for wash hand basin complete all as specified and directed by Engr-in-charges. |
| 122 | S& F chromium plated Wall mixer 3-in-1 system including adujstable wall flange and overhead shower (150 x 150 mm ) complete all as specified and directed by Engr-in-charges. |
| 123 | S&F in repair Soap dish, cromium plated , any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-charges. |
| 124 | S &F Anodised Aluminium handles 150 mm size fabricated type complete all as specified and directed by Engr-in-charges. |
| 125 | S & F for Aluminium anodised,barrel tower bolts of 150mm size & fixed complete all as specified and directed by Engr-in-charges. |
| 126 | S&F stainless steel butt hinge of size 100mm, complete all as specified and directed by Engr-in-charges. |
| 127 | S&F 5 - 6 mm thick bevelled edges high quality looking mirror fancy type fixed to wall with chromium plated screw with cup washers etc complete all as specified and directed by Engr-in-charges. |
| 128 | S&F as in repairs two way angle bib cock cromium plated fancy type 15 mm bore /size complete all as specified and directed by Engr-in-charges. |
| 129 | M&L for carrying out water proofing treatment for sunken portion in the following stages - (i) Taking down of existing sunken slab treatment from the sunken portion and cleaning the surfaces washing down with water and rubbish of the pemises , cleaning and filling cracks with sealing compound, brushing neat cement slurry @ 3.00kg/sqm and grouting 25mm thick cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate on sunken slab portion and finishing the top surfaces even and smooth without using extra cement. (ii) M&L for two coat of acrylic cementitious water proofing coating (Dr FIXITpidifin 2k manufactured by M/s Pidilite Industries Ltd or equivalent) and followed by a overlay protective screed (10mm thick cement mortar (1:4) along with liquid water proofing compound approved make as per manufacturer's instructions) on top surfaces of sunken slab after preprations as mentioned above. Method of application for acrylic cementitious water proofing coating achieved as per manufacturers instruction complete all as specified and directed by Engr-in-charges. |
| 130 | M&L for PCC (1:5:10) lean cement concrete type E2 using 40 mm graded stone aggregate in mass concrete after carrying out satisfactory testing of CI pipe/ PVC pipe joints and slab /wall by filling water for 72 hours, complete all as specified and directed.Note:- Nahani/ floor trap and pipe joints shall be embedded in PCC 1:3:6 type C1 complete all as specified and directed by Engr-in-charges. |
| 131 | Taking down steel windows/ vents & remove from site complete all as specified and directed by Engr-in-charges. |
| 132 | Taking down or up steel tubing and connection including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-charges. |
| 133 | (a) 25 mm dia |
| 134 | (b) 20 mm dia |
| 135 | (c ) 15 mm dia |
| 136 | Supplying and laying of CPVC pipes, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laid in floors complete all as specified and directed by Engr-in-charges. |
| 137 | (a) 25 mm outer dia, |
| 138 | (b) 20 mm outer dia |
| 139 | (c) 16 mm outer dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc |
| 140 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-charges. |
| 141 | S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engr-in-charges. |
| 142 | Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore complete all as specified and directed by Engr-in-charges. |
| 143 | Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore complete all as specified and directed by Engr-in-charges. |
| 144 | S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engr-in-charges. |
| 145 | S&F 110mm bore PVC (SWR) single socketed in any length with rubber ring joints laid in trench or floor complete all as specified and directed by Engr-in-charges. |
| 146 | S&F 75mm bore PVC (SWR) single socketed in any length with rubber ring joints laid in trench or floor complete all as specified and directed by Engr-in-charges. |
| 147 | S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engr-in-charges. |
| 148 | S & F 110 mm bore PVC [SWR] branch piece, single [single \\"Y\\"] equal or unequal complete all as specified and directed by Engr-in-charges. |
| 149 | S&F 110 mm bore (SWR) PVC bends any radius complete all as specified and directed by Engr-in-charges. |
| 150 | S&F 75 mm bore (SWR) PVC bends with oval acess door, complete all as specified and directed by Engr-in-charges. |
| 151 | S&F PVC SWR vent cowl 110mm, complete all as specified and directed by Engr-in-charges. |
| 152 | S&F PVC SWR vent cowl 75mm, complete all as specified and directed by Engr-in-charges. |
| 153 | S& F in repairs 75mm bore PVC [SWR] Junction single [single \\"T\\"] equal or unequal with access door complete all as specified and directed by Engr-in-charges. |
| 154 | M&L 75mm Cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with cp grainting complete all as specified and directed by Engr-in-charges. |
| 155 | M&L 100mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) including cp grating complete all as specified and directed by Engr-in-charges. |
| 156 | S&F CP Brass health foucet with 1200 mm long flexible mild steel tube 80 mm dia with wall hook complete all as specified and directed by Engr-in-charges. |
| 157 | M&L for fabrication of aluminium powder coated ventilators (with louvered) fabricated with anodized aluminium rectangular section in frame & with deco grill of approved design & stainless steel wire cloth on the outer side of frame & trade pattern louvers with suitable mechanism for tilting /opening closing etc all as per sample approved by GE & fixed in position complete all as specified and directed by Engr-in-charges. (Note : Glass pane in louvers & stainless steel wire cloth shall be measured & paid separately) |
| 158 | M&L for fabrication of powder coated aluminium frame work as in frames for aluminium windows with aluminium section weighing 0.55 kg/m with or without rebate or for sliding windows(two track/three track ) , ventilators etc with louvers having suitable mechanism for tilting , U shaped fillets complete all as specified and directed by Engr-in-charges. |
| 159 | M&L for fabrication of Anodised aluminium powder coated window shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed by Engr-in-charges. |
| 160 | M&L for pre powder coated aluminium decogrill all as per sample fixed to aluminium framework of windows & ventilators. complete all as specified and directed by Engr-in-charges. |
| 161 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to anodised aluminium frame work of windows / ventilators with stainless steel wire staples complete all as specified and directed by Engr-in-charges. |
| 162 | Supply & laying jointing and testing 150mm bore reinfirced conctete pipes class NP-2 laid and jointed in cement mortor 1:1 complete with collars or socket/spigot type laid jointed and haunching at side in cement complete all as specified and directed by Engr-in-charges. |
| 163 | S&F Brass chromium plated bottle traps 32 mm for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed by Engr-in-charges. |
| 164 | M&L for 16-18m thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, counter type platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed by Engr-in-charges. |
| 165 | M&L for 75 mm thick Cement concrete type D - 2,1:4:8 (40 mm graded agg) as in sub base to floors incl well compacting & laid to levels complete all as specified and directed by Engr-in-charges. |
| 166 | M&L for rolled mild steel roof trusses(framed), trussed,vertical post,purlins,crane gantries,rails and fastenings and heavy bracket framing including distance pieces, cleats,tee,angle etc. confirming to Fe410-W (Gde E-250)Quality A, complete all as specified and directed by Engr-in-charges. |
| 167 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws complete all as specified and directed by Engr-in-charges. |
| 168 | Demolition of cement concrete (unreinforced) of any description and any position not otherwise specifically provided for (roof padding/roof kerb etc) including dismantling of existing membrane and cement mortar and removal of debris outside of MOD land complete all as specified and directed by Engr-in-charges. |
| 169 | M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof padding over old cleaned surface of any description on roof/terrace to fill any depressions etc or to obtain desired slopes. complete all as specified and directed by Engr-in-charges. |
| 170 | M&L Rendering 20mm thick in cement mortar (1:4), mixed with integral water proofing liquid all as per manufacturer's instructions over concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed by Engr-in-charges. |
| 171 | M&L for carrying out water proofing treatment for roofs in the following stages - . (i) Material and labour for UV stable single component fibre reinforced elastomeric liquid applied waterproofing membrane having solid content of 55% formulated wih PU hybrid polymers and reinforcing acrylic fibres and having sun reflectivity Index (SRI) of 106. The application of the material should be done in three coat (6 hr gap after each coat) on the substrate, applying first self priming coat at ratio of damp proof ultra and water 3:1 then 2 undiluted coat of damp proof ultra obtaining coverage @1 ltr/10 sqft in two coats (10-12 hrs gap between each coat. The vital physical and chemical parameters shall be as under. Min elongationat break of 350%, crack bridging ability of 2.5 mm @650 microns thickness, resists positive hydrostatic pressure of up to 10 bars. The material shall be appliied with brush or roller, complete in all respect as per the direction of Engr-in charge/consultant. Also, proper surface preparation along with covingat corners is must. Note : - The work shall be executed by the authorized applicator of the manufacturer only. Note : - 1.The authorized applicator of manufacturer shall be approved by GE. 2.The color of final finish shall be decided by the GE complete all as specified and directed by Engr-in-charges. |
| 172 | S&F of pressed steel frames of size 165x60mm for doors with one or more rebates incl necessary fixing lugs,hinges,lock strice plate etc including complete all as specified and directed by Engr-in-charges. |
| 173 | S & F (a) 35mm thick factory made second class hardwood glazed and Skelton door shutters, open rebated and prepared to receive glass/gauze etc(without sash bar) edges of framing plain chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-1991 section 8 clause 8.24 (b) supplied and fitted to chowkhats complete all as specified (b) ss wire cloth 0.36 mm nominal dia of wire , avrage width of aperture 1.40mm fixed with ss wire staple (c) aluminium grill medium grade mess size 50x500mm , fixed atouter edge at outer edge of door (d) primer-pink complete all as specified and directed by Engr-in-charges. |
| 174 | S&F 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with both face covered with decorative face veneer with lipping/frame to match, complete all as specified and directed by Engr-in-charges. |
| 175 | M&L for treating the surface of existing kota stone floors, surfaces of dado/skirting with bees wax polish including cleaning and preparing the surfaces complete all as specified and directed by Engr-in-charges. |
| 176 | M &L as in repairs for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all as specified and directed by Engr-in-charges. |
| 177 | S & F Vitreous China Urinal, Half stall type,white with Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) including PVC connection , bottle trap 32mm complete all as specified and directed by Engineer-in-charge. |
| 178 | S & F Vitreous china urinal partition white of size 310x700 mm complete all as specified and directed by Engineer-in-charge. |
| 179 | Dismantling existing tanks of any description n exc 500 ltrs capacity and removing from site. complete all as specified and directed by Engr-in-charges. |
| 180 | Dismantling existing tanks of any description n exc 1000 ltrs capacity and removing from site. complete all as specified and directed by Engr-in-charges. |
| 181 | S&F 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl fixing arrangment for inlet/outlet/overflow & vent pipe of standard size complete all as specified & directed by Engineer-in-charge. |
| 182 | S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position incl fixing arrangment for inlet/outlet/overflow & vent pipe of standard size complete all as specified & directed by Engineer-in-charge. |
| 183 | S&F CP Brass health foucet with 1200 mm long flexible mild steel tube 80 mm dia with wall hook complete all as specified and directed by Engr-in-charges. |
| 184 | Excavation in trenches n exc 10 sqm on plan n exc 1.5 m deep and n exc 1.5 m wide , getting out in any type of soil. complete all as specified and directed by Engr-in-charges. |
| 185 | All as per item No 178 above but exceeding 1.5 m deep and nexc 3.0m deep. complete all as specified and directed by Engr-in-charges. |
| 186 | Returning filling in incl spreading levelling watering and well ramming in layers n exc 25cm thickness. complete all as specified and directed by Engr-in-charges. |
| 187 | Removing excavated soil to a distance n exc 50m and depositing at alevel n exc 1.5m above the starting point. complete all as specified and directed by Engr-in-charges. |
| 188 | Demolition and breaking up RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches for the following sizes :-. complete all as specified and directed by Engr-in-charges. |
| 189 | (a) 150mm dia of pipe. |
| 190 | (b) 200mm dia pipe |
| 191 | Supply and laying in trenches, aligning and jointed for DWC HDPE pipe ID 150/172 mm, SN-8 laid in trenches complete with coller fixed and jointed in cement mortar and tested complete all as specified and directed by Engr-in-charges. |
| 192 | Supply and laying in trenches, aligning and jointed for DWC HDPE pipe ID 200/230 mm, SN-8 laid in trenches and jointed complete with coller fixed and jointed in cement mortar and tested complete all as specified and directed by Engr-in-charges. |
| 193 | Material and labour cement concrete (1:3:6) type C-2 bed to drain 150mm bore pipe including packing under and haunching against the sides of pipes for pipe after they are laid & tested complete all as specified and directed by Engr-in-charges. |
| 194 | Material and labour cement concrete (1:3:6) type C-2 bed to drain 200mm bore pipe including packing under and haunching against the sides of pipes for pipe after they are laid complete all as specified and directed by Engr-in-charges. |
| 195 | M&L For PCC type B1 (1:2:4) using 20 mm graded cushed stone agg as in coping, benching and the like incl necessary form work. complete all as specified and directed by Engr-in-charges. |
| 196 | M&L Precasted RCC 1:2:4 type B1 using 20mm graded aggregates for precast cement conc slabs as in drain/ manhole covers set in cement mortar1:4. complete all as specified and directed by Engr-in-charges. (Note : Slab covers shall be floated with surface vibrator,and over turfed base ,arrangement for turfed base has to be from contractors side) |
| 197 | M&L for mild steel steel TMT bars 6mm to 8mm dia and over cut to length bent to shape reqd ,incl cranking ,bending spirally for hooping columns hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia complete all as specified and directed by Engr-in-charges. |
| 198 | M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete ,using extra cement ,incl forms moulds ,mitered/stopped ends etc complete all as specified and directed by Engr-in-charges. |
| 199 | M&L for random rubble stone masonary well bonded bedded solidily hearted in cm 1:6 complete all as specified and directed by Engr-in-charges. |
| 200 | Ditto all as per item No 191 above but except stone incl cleaning, sweeing etc complete all as specified and directed by Engr-in-charges. |
| 201 | Extra over stone walling for hammer dressing for lime or sand stone n.exc 40mm depression on face from straight edge held against the dressed surface. complete all as specified and directed by Engr-in-charges. |
| 202 | M&L for PCC 1:3:6, type C1, using 20mm graded crushed stone aggregate as in surface channel and drain beds including all necessary form work. complete all as specified and directed by Engr-in-charges. |
| 203 | M&L for Cutting in to existing manhole for connecting new drains,making good to pipe and rendering ,cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150mm/200mm/300mm complete all as specified and directed by Engr-in-charges. |
| 204 | M&L rendering 15mm thick in cm 1:4 concrete or brick surfaces as in wall finishes even and smooth without using extra cement complete all as specified and directed by Engr-in-charges. |
| 205 | M &L for cutting to bituminious road for laying of RCC hume pipe any dia & making good as per road specification and complete all as specified and directed by Engr-in-charges. |
| 206 | M &L (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed by Engr-in-charges. |
| 207 | Cleaning of manholes complete of any size and at any location incl taking out sludge and other material deposited in manhole by mechanical means and its disposal to a distance n exc. 50m complete all as specified and directed by Engr-in-charges. for depth of manholes as given below:- |
| 208 | (a) Depth of manhole n exc 1.00 M |
| 209 | ( b) Depth of manhole exc 1.00 M and n exc 2.00 M |
| 210 | Cleaning/Removal of sewage block in the existing line incl cleaning of complete line laid at any depth and at any location between two consecutive manholes for the following:- complete all as specified and directed by Engr-in-charges. |
| 211 | (a) Two consecutive manhole to manhole incl testing the pipe by pouring water from manhole all as directed to the entire satisfaction of Engr-in-Charge for 150mm bore SGSW/RCC pipe . |
| 212 | (b) All as per item above but 200mm bore SGSW/RCC Pipe. |
| 213 | Cutting and grubbing of bushes grass and tree surrounding manholes,Gully trap, bend, wall pipe and overhead tank etc and levelling of ground around the manholes and finish the surface of wall and removing the waste material to a distance exc 50m and n exc 250m and clearing the site. complete all as specified and directed by Engr-in-charges. |
| 214 | S&F 50 to 75 mm thick Jodhpur type machine cut stone slab not exc 2m in length dressed all face & along exposed edged size faced both sided as in drain cover/MH cover complete all as specified and directed by Engr-in-charges. |
| 215 | Taking down carefully aluminium point wiring for light, fan, bell socket power socket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc complete all as specified and directed by Engr-in-charges. |
| 216 | Taking down carefully sub-main wiring (with DB any type) of any size and making good to ther disturbed surfaces to match the existing complete all as specified and directed by Engr-in-charges. |
| 217 | M & L for (concealed) point wiring complete with multistranded copper conductor 1.5 Sqmm PVC insulated unsheathed single core FRLS cable 1100 volt grade, confirming IS 694 & colour code in conduit system of wiring, drawn through in and including non-metalic PVC concealed (including Cutting Chases and make good the distrubed surfaces ) conduit of size 20 mm or med grade as required as site, totally concealed in walls / and surface on floors / ceiling or fixed on surface of walls / columns / beam / tie beam etc by means of saddles and clips etc incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, all as specified, directed and shown on drgs for The rates of chase cutting on wall done concealed conduit and steel terminal boxes are included in the unit rates complete all as specified and directed by Engr-in-charges. (a) One light point controlled by one, one way switch |
| 218 | (b) One fan /Exhaust fan, point controlled by one way switch. |
| 219 | (c) One socket outlet 3 pin 6 Amps on same board |
| 220 | (d) One socket outlet 3 pin 6 Amp on independent board |
| 221 | (e) One bell point controlled by one bell push. |
| 222 | (f) One light point controlled by two, two-way switches |
| 223 | All as per item No 205 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board. complete all as specified and directed by Engr-in-charges. |
| 224 | S&F switch piano flush type single pole one way 6 Amp ISI Marked. complete all as specified and directed by Engr-in-charges. |
| 225 | Supply and fixing switch piano flush type 5/6 amp single pole two way 230 V complete all as specified and directed by Engr-in-charges. |
| 226 | S & F Bell, ding dong type AC, 230 volts, single pole complete all as specified and directed by Engr-in-charges. |
| 227 | S & F Bell push 5/6 Amps, flush type complete all as specified and directed by Engr-in-charges. |
| 228 | S&F switch piano flush type single pole one way 16 Amp ISI Marked.complete all as specified and directed by Engr-in-charges. |
| 229 | S&F socket outlet 2 in 1, 3 pin, 6 Amp flush type ISI Marked. complete all as specified and directed by Engr-in-charges. |
| 230 | S&F socket outlet 2 in 1, 6 pin, 6 and 16 amp flush type ISI Marked. complete all as specified and directed by Engr-in-charges. |
| 231 | M & L for Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body. complete all as specified and directed by Engr-in-charges. |
| 232 | M & L for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting. complete all as specified and directed by Engr-in-charges. |
| 233 | S&F LED lamp 9 W complete all as specified and directed by the Engineer-in-Charge. complete all as specified and directed by Engr-in-charges. |
| 234 | Supply and fix socket type (2 module) electonic fan regulator flush type ISI Marked. complete all as specified and directed by Engr-in-charges. |
| 235 | Taking down and refixing / rehanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engr-in-charges. |
| 236 | S&F sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 6 MCB SP as out going SPN 8 way complete all as specified and directed by Engr-in-charge. |
| 237 | S&F sheet metal enclosures 415 volt TPN 4 way with 200 Amp rated bus bar, double door DB's suitable for provn for a MCB One TPN 63 Amps as incoming and 4 Nos of SPN 63 Amps outgoing complete all as specified and directed by Engr-in-charge. Note : MCB/RCCB TPN/SPN/SP measured and paid saperatly. |
| 238 | Supply and Fix MCB Single pole\\"C\\" series 6-32 Amps ISI marked. complete all as specified and directed by Engr-in-charges. |
| 239 | Supply and Fix MCB Single pole & neutral \\"C\\" series 40-63 Amps ISI marked. complete all as specified and directed by Engr-in-charges. |
| 240 | Supply and fixing MCB TPN C Curve 63 Amps complete all as specified and directed by Engr-in-charges. |
| 241 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light 4 ft long connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charges. |
| 242 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires of enviroment friendly energy saving including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed by Engr-in-charges. |
| 243 | S&F in LED light fitting 1 X 10 watt (2feet), decorative ultra slim mirror type, with inegral driver, complete with all accessories and making necessary electric connection from ceiling rose to fitting terminal, complete all as specified and directed by Engr-in-charges. |
| 244 | Supply and fixing LED street light fitting 36 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified and directed by Engr-in-charges. |
| 245 | M&Lfor sub main wiring with PVC insulated and unsheathed 2x 6 Sq mm single core multistrandred copper conductor cable passing through in and including 25mm dia PVC conduit , concealing in walls (by means of chasing including making good existing surface and matching existing surface ) ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 6 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire. complete all as specified and directed by Engr-in-charges. Note :- Two runs of cable 6 Sqmm and One run of 6 Sqmm along with conduit shall be measured as one unit length. |
| 246 | Taking down and re-fixing only incl connecting electric meters complete all as specified and directed by Engr-in-charges. |
| 247 | S&F of Heavy duty Exhaust fan 300 mm sweep, 900 RPM, including louvers with cutting chases on brick wall and grounting with nut bolts complete all as specified and directed by Engr-in-charge. |
| 248 | S&F of Ventilaion fan metal body 230 mm sweep mm sweep including louvers with cutting chases on brick wall and grounting with nut bolts complete all as specified and directed by Engr-in-charge. |
| 249 | M&L for Earthing complete with galvanised steel earth plate electrode 60 x 60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion . Note : Rates are deemed to be included for necessary earth work , earth pit with RCC cover of size 300X300 x25 mm etc complete all as specified and directed by Engr-in-charges. |
| 250 | Supply, laying testing in trenches LT UG XLPE insulated,armoured, heavy duty electric cable, aluminium coductor, 1100 V grade,croos sectional area 35 sqmm 3.5 core complete all as specified and directed by Engr-in-charges. Note : Earth work and brick work measured and paid separately |
| 251 | Supply and laying Un reinforced Precast concrete cable cover, class LV type 2 flat size 300 mm x 180 mm x 40mm complete all as specified and directed by Engr-in-charges. |
| 252 | Supply and lay sand for sand cushioning for cable protection in trenches all as directed and specified in SSR Part - 1.Note:. for the purpose of payment punned thickness will be measured. complete all as specified and directed by Engr-in-charges. |
| 253 | Supply and fix GI tubing light grade of 40 mm dia for cable protection complete all as specified and directed by Engr-in-charges. |
| 254 | Taking down DB with MCB any type/any size & single pole and neutral enclosure with two pin and earth plug with MCB/MCCB/ including all connecting accessories. complete all as specified and directed by Engr-in-charges. |
| 255 | S&F socket outlet 2in1,6 pin 6 Amp/16 Amp, 6 pin combined 2 module complete all as specified and directed by Engr-in-charges. |
| 256 | S&F and testing factory made sheet metal enclosure for MCB DB SPN 8 way 240 volt with double door, IP - 43 protection duly fixed/concealed in wall complete and making good disturbed surfaces of wall, floor etc including necessary connection lugging with copper lugs pin/ring type complete all as specified and directed by Engr-in-charges. |
| 257 | S&F MCB single pole and neutral 240 volts any rating from 40 to 63 amps, with rupturing capacity 10 KA, 'B' curve type, with over load and short circuit protection. complete all as specified and directed by Engr-in-charges. |
| 258 | S&F MCB single pole 230 volts any rating from 6 to 32 amps, with rupturing capacity 10 KA, 'B' curve type, with over load and short circuit protection. complete all as specified and directed by Engr-in-charges. |
| 259 | S&F Distribution Board, double Door, suitable for 'A' Frame FP MCB 100A made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, TPN 4 way, 415 volts with bus bar rating 300 Amps, dust and vermin proof, suitable for incorporation of MCB’s etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed by Engr-in-charges. Note : MCBs shall be measured and paid for separately. |
| 260 | Supply and lay in trenches/on wall/on pole/in duct /through protection pipe, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables heavy duty LT cable, 1100 volts grade with aluminium conductor cross sectional area 50 Sqmm 3.5 core size including retrieving/taking out/taking down old unserviceable cable from duct/trenches/pipes/pole/wall etc. including brick cover and protection pipe and disconnecting the connections. complete all as specified and directed by Engr-in-charges.Note:- Excavation and earth work, sand cushioning, PCC cable cover and protection pipe etc. shall be measured and paid for separately. |
| 261 | Materials and labour for earthing as in repair complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of size 25 x 4mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on complete all as specified and directed by Engr-in-charges. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead. |
| 262 | Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat, size 250x150mm x40 mm complete all as specified and directed by Engr-in-charges. |
| 263 | S & F Single pole and neutral enclosure with two pin and earth plug socket complete with one single pole MCB 20 Amp 'c' curve type ,230 volts ,10 KA complete all as specified and directed by Engr-in-charges. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
