|
| 1 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 2 | Material and labour for brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 4 | Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth (without using extra cement) complete all as specified and directed. |
| 5 | Material and labour for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4 with WPC @ 3% by weight of cement surface finished even and smooth complete all as specified and directed.Note : WPC will be paid separately |
| 6 | Supply only water proofing compound complete all as specified and directed. |
| 7 | Material and labour for 10 mm thick rendering on celing surface in cement mortar 1:3 mixed surface finished even and smooth complete all as specified and directed. |
| 8 | Material and labour for preparation of newly plastered surface of walls including corners and applying two coats of OBD over applying of 1.5-2 mm thick wall care putty finish wall surface even & smooth complete all as specified and directed. |
| 9 | Material and labour for preparation of newly plastered surface of walls including corners to receive the coats as per manufacturer directions and applying two coats of SmartCare Damp Proof Advanced of approved colour consist of fiber reinforced elastomeric liquid applied waterproofing membrane, foRunning metreulated with select elastomeric and resilient acrylic polymers and reinforcing synthetic fiber which foRunning metre a thick, seamless, durable membrane upon curing and offers ultimate waterproofing complete all as specified and directed .. Make:- Asian Paints Product Cose 5457 or Berger Home Shield Dampstop Elasto or Nerolac PeRunning metrea No Damp + or equivalent. |
| 10 | Material and labour for preparation of newly plastered surface on ceilings and applying two coats of distemper oil emulsion on ceiling, off sets, pillar etc. over applying of 1.5-2 mm thick wall care putty finish wall surface even & smooth complete all as specified and directed. |
| 11 | Material and labour for complete removal of existing treatment of walls including corners and applying two coats of distemper oil emulsion over applying of 1.5-2 mm thick wall care putty finish wall surface even & smooth complete all as specified and directed. |
| 12 | Material and labour for complete removal of existing treatment and preparation of old plastered surface of walls including corners to receive the coats as per manufacturer directions and applying two coats of SmartCare Damp Proof Advanced of approved colour consist of fiber reinforced elastomeric liquid applied waterproofing membrane, foRunning metreulated with select elastomeric and resilient acrylic polymers and reinforcing synthetic fiber which foRunning metres a thick, seamless, durable membrane upon curing and offers ultimate waterproofing including preparation of surfaces complete all as specified and directed .. Make:- Asian Paints Product Cose 5457 or Berger Home Shield Dampstop Elasto or Nerolac PeRunning metrea No Damp + or equivalent. |
| 13 | Material and labour for preparation of old plastered surface of ceiling and applying one coat of OBD on ceiling, off sets, pillar etc. complete all as specified and directed. |
| 14 | Material and labour applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed. |
| 15 | Material and labour for vitrified ceramic tiles light shade 7-8 mm thick (square/rectangular) polished area of Each Point tiles not exceeding 0.72 Square metre in floor etc. over and including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry @3Kg/sqm and pointed in white or coloured cement to match with tile including dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 16 | Description all as per item No 15 above but as in skirting and including 10 mm thick rendering in cement mortar 1:4 complete all as directed and specified. |
| 17 | Material and labour for non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6-7 mm thick in floor, set and jointed in neat cement slurry @3Kg/sqm and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 and dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 18 | Description all as per item No 17 in above but as in skirting and including 10 mm thick rendering in cement mortar 1:4, complete all as directed and specified. |
| 19 | Material and labour glazed ceramic colour tiles size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry @3Kg/sqm and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 and dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed and specified. |
| 20 | Dismantling of stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 21 | Material and labour for 16-18 mm thick Granite, of any type, table rubbed and polished in steps, jambs, pillars, window- cills, cooking platfoRunning metres and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding complete all as specified and directed. |
| 22 | Taking down chowkhats or frames n.exc 1.50 Square metre with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 23 | Taking down chowkhats or frames exc 1.50 Square metre but n.exc 4.00 Square metre with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 24 | Supply and fix factory made 100 % solid wood plastic composite (WPC) door frame 125x50 mm made from wood plastic composite (single extruded process) material with density 780 Kilogram/Cum from ISO certified company door should be water proof, teRunning metreite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed . |
| 25 | Supply and fix factory made 100 % solid wood plastic composite (WPC) door frame 105x60 mm made from wood plastic composite (single extruded process) material with density 780 Kilogram/Cum from ISO certified company door should be water proof, teRunning metreite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed . |
| 26 | Supply and fixing 30 mm thick WPC factory made 100% solid designer flush door (confoRunning metreing as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kilogram/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, teRunning metreiite proof, fire etardant and having screw holding capacity complete all as specified and directed .. |
| 27 | Supply and fix 30 mm thick moulded WPC factory made Glazed and skeleton shutter (confoRunning metreing as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kilogram/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, teRunning metreite proof, fire etardant and having screw holding capacity complete all as specified and directed .. |
| 28 | Supply and fixing for stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with nails complete all as specified and directed. |
| 29 | Supply and fix stainless steel Butt Hinges medium weight, cold rolled mild steel 100 mm fixed to steel/wooden shutters complete all as specified and directed. |
| 30 | Supply and fixing for stainless steel tower bolts 150 mm size fixed with stainless steel screws complete all as specified and directed. |
| 31 | Supply and fixing for 150 mm size stainless steel handles fixed with stainless steel screws complete all as specified and directed .. |
| 32 | Supply and fix 300 mm long MS Helical door spring welded to steel frame or fixed to wooden door frame with screws including roller and roller plate etc complete all as specified and directed. |
| 33 | Supply and fix floor door stopper of stainless steel double legged and tongue, 304 grade, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed. |
| 34 | Supply and fixing aluminium body door cill at bottom part of door to stop entry of insect inside the room complete all as specified and as directed. |
| 35 | Supply and fix stainless steel sliding door bolts 204 grade, hasp and staple type with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm long complete all as specified and directed. |
| 36 | Supply and fixing for powder coated Aluminium standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos stainless steel wire gauged shutter sliding type, 3 track numbers for sliding windows, and glazed with glass 4mm thick & including glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum including locking system and provision of space for AC etc complete all as specified and directed ..Size of Track-Both Top & Bottom (Verticles sides):- 100 x 44 x 1 mmSize of Shutter Frame:- 25 x 12 x 1 mmNote: Iron grill with frame to be fixed with window (measured and paid separately) |
| 37 | Supply and fixing for powder coated Aluminium partition (Fixed) made out of aluminium powder coated section 44 x 44 x 1 mm including 4 mm thick glass/ACP Sheet complete with rubber packing/aluminum beading etc, complete all as specified and directed.Note: Iron grill with frame to be fixed with window (measured and paid separately) |
| 38 | Supply and fix for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; staircase; walk ways; railings; framework of water tanks and similar work con- foRunning metreing to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed. |
| 39 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 40 | Supply and fix steel work in angle/tubular section for stair case, railing at balconies, roof truss etc including special shaped washer etc complete using ERW or induction butt welded tubes confoRunning metreing to IS 1161-179 grade St-240 complete all as specified and directed. |
| 41 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings etc, complete all as specified and directed. |
| 42 | Supply and fix for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 43 | Supply and fixing for prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 44 | Dismantling block board/ boarding of any description and in any position complete including iron mongries , complete all as specified and directed. |
| 45 | Supply & fix 18 mm thick PVC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive complete all as specified and directed. |
| 46 | Supply & fix 6 mm thick PVC board both side plain white colour as in cub board selves etc fixed with screws, salvent cement/ adhessive , complete all as per specifications and directed. |
| 47 | Supply and fix of continuous (Piano) hinges, mild steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and directed. |
| 48 | Supply and fix magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 49 | Supply and fix in repair 25 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative finished at both ends complete all as speccified and directed as per approved sample complete all as specified and directed. |
| 50 | Supply and fix medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing including dismantling of old tubing complete all as specified and directed. |
| 51 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth ,complete all as specified and directed .. |
| 52 | Supply and fix medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing including dismantling of old tubing complete all as specified and directed. Please Enable Macros to View BoQ information |
| 53 | Supply and fix medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing including dismantling of old tubing complete all as specified and directed. Please Enable Macros to View BoQ information |
