|
| 1 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-charge. |
| 2 | Dismantling of timber scantling 40 Sq cm and over in section in any position, unframed work complete all as specified & as direcetd. |
| 3 | Removing building debris to a distance exc 1.5km & n.exc 5 km outside MOD land , including loading, unloading and stacking at the destination complete all as specified and directed. |
| 4 | Dismantling of timber scantling under 40 Sq cm in section in any position, unframed work complete all as specified & direcetd. |
| 5 | Taking down Chowkhats or frames exc 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified & direcetd. |
| 6 | Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified & direcetd. |
| 7 | Use and waste of formwork to sides and soffits of floor or roof beam, beam haunching, girders, bressummers, lintels,cantilevers, shelves including sup-ports, overhangss etc. also splays between floor and beams,etc. complete all as specified and directed. |
| 8 | Mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending for hooping of columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, as in reinforcement, complete all as specified and directed. |
| 9 | Mild steel TMT bars incl 5mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending for hooping of columns, hooking ends and binding with and including mild steel wire (annealed) or securing with clips, as in reinforcement, complete all as specified and directed. |
| 10 | M&L reinforcement cement Type B1 1:2:4, 20 mm aggregate in beam,cantilevers,bressummers, lintels,over 1.5 span complete all as specified & direcetd. |
| 11 | M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, completeType C1 1:3:6 (20mm graded aggregate)Set in cement mortar 1:6 including demolition of Precast concrete block masonary and removing rubbish off the premises complete all as specified and directed by Engr-in-charge. |
| 12 | M&L Rendering 15mm thick Cement plaster 1:4 on fair faces of brick work or concrete surfaces complete . |
| 13 | M&L Rendering 10mm thick Cement plaster 1:6 on fair faces of brick work or concrete sur faces rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed by Engr-in-charge. |
| 14 | Preparation of new plastered or unplastered surfaces of walls and applying one coat of oil bound distemper on walls complete all as specified and as directed by Engineer-in-Charge. |
| 15 | Dismantling WI or MS work of any description complete all as specified & direcetd. |
| 16 | S&F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161- 1979 grade St.-240 complete all as specified and directed. |
| 17 | Dismantling plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof coverings complete all as specified & direcetd. |
| 18 | S&F for pre–painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 19 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colou hving tensile strength of 550Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified. |
| 20 | S&F in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified & direcetd. |
| 21 | S&F mild steel screw bolts (machine made) with hexagonal or end and screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long complete all as specified & direcetd. |
| 22 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as directed. |
| 23 | M&L for 2nd class soft-wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, supplied and fixed in 2nd class soft-wood |
| 24 | M&L for 30mm thick 2nd class softwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered partical board medium density, wood partical board with commercial face veneers: supplied and fitted to chowkhats complete all as specified and directed. |
| 25 | M&L for 30mm thick 2nd class softwood glazed and skeleton shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered partical board medium density, wood partical board with commercial face veneers: supplied and fitted to chowkhats complete all as specified and directed. |
| 26 | S&F 4.8 mm Sheet glass,ordinary quality and glazing in square n exc 0.5 sq. m in each pane complete all as specified & direcetd. |
| 27 | S&F 4.8 mm Sheet glass,ordinary quality and glazing in square exc 0.5 sq. m in each pane complete all as specified & direcetd. |
| 28 | S&F 4.8 mm thick Sheet glass,ordinary quality if sheet glass is ground or obscured or frosted, on one side in square exc 0.5 sq. m in each complete all as specified & direcetd. |
| 29 | S&F in repair Floor door stopper of brass body and tongue, anodised with hard drawn steel spring, fixed in floor 140 mm long complete all as specified & direcetd. |
| 30 | S&F Butt Hinges, cast brass with mild steel hings pin, bright polished and fixed, type B-11 100mm size complete all as specified & direcetd. |
| 31 | S&F Butt Hinges, cast brass witht mild steel hings pin, bright polish and fixed type B-11of 125mm size complete all as specified & direcetd. |
| 32 | S&F extruded brass handles, fabricated type polished of size 150mm complete all as specified & direcetd. |
| 33 | S&F Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed of size 200mm complete all as specified & direcetd. |
| 34 | S&F Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed of size 100mm complete all as specified & direcetd. |
| 35 | S&F Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed of size 300mm complete all as specified & direcetd. |
| 36 | S&F Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed of size 250mm complete all as specified & direcetd. |
| 37 | S&F in repair 20mm dia SS coated premium quality curtain rails including fixing brackets ,stop,side and end cap etc complete all as specified & direcetd. |
| 38 | S&F in repair Aluminium (Die cast) body.door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified & direcetd. |
| 39 | M&L 25 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as in sub base including Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground levels)and removing rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 40 | M& L Glazed ceramiccoloured tiles in vertical surface 450x300x6-7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, over and includingrendering, 10mm thick Cement plaster 1:4 on fair faces of brick work or concrete sur faces and Dismantling of wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 41 | M&L Non - skid /Anti Skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with over and including Screed bed or bedding layer of mortar 15 mm 1:6 thick for laying floor finishes and Dismantling of floor tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 42 | M&L for Granite18 -20mmm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms,washroom counters and like including Screed bed or bedding layer of mortar 15 mm 1:4 thick for laying including point ing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and Demolition of Stone slabs and tiles of any description or thickness in floors ,aprons,counters,plateforms etc laid bedded and pointed in any mortar and removing rubbish off the premises complete all as specified & direcetd. |
| 43 | M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of oil bound distemper on walls complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Material and labour for appying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV reistance as per IS 15489;2004 Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted ) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old/ new surface. |
| 45 | M&L for applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth. |
| 46 | S&F in repair pvc (SWR) 75mm bore vent cowl complete all as specified & direcetd. |
| 47 | S&F in repairs vitreous china urinal partition white of size 310x700mm complete all as specified and directed and directed by Engr-in-charge. |
| 48 | S&F, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipes with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 49 | S&F in repair coloured cascade type EWC of 10 lit cistern incl all accessories, fixing complete all as specified & direcetd. |
| 50 | S&F in repairs Waste fittings, 32mm brass , chromium plated for glazed ware sinks , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed complete all as specified & direcetd. |
| 51 | S&F in repairs Stainless steel sink with draining board , made out of 1.00 mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mmx 330 mmx160mm complete all as specified & direcetd. |
| 52 | S&F in repair Bib taps,15 mm bore fancy type cast copper alloy Chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed and fixed complete all as specified and directed by Engr-in-Charge. |
| 53 | S&F in repair pillar taps,15 mm bore fancy type cast copper alloy, with capstan heads,chromium plated ,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge. |
| 54 | S&F in repair stop valves, 15 mm bore fancy type chromium plated cast copper alloy, screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-charge. |
| 55 | S&F in repair Grating doom 100mm dia of PTMT complete all as specified & direcetd. |
| 56 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified & direcetd. |
| 57 | S&F in repair bevelled edge mirror 5.5mm thick of selected quality glass fixed to wall with chromium plated brass screws complete all as specified & direcetd. |
| 58 | S&F in repairs Toilet paper holder, with flat recessed type stainless steel complete all as specified and directe. |
| 59 | S&F in Repairs vitreous coloured china wash basin, size 600x480mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets alongwith chinaware pedestal complete all as specified & direcetd. |
| 60 | S&F in repairs Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified & direcetd. |
| 61 | M&L 3-layer PP-R Polypropylene random copolymer) concealed pipes Outer diameter of pipes 20 mm SDR 7.4 (PN16) UVstabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc including Taking up or down existing tubing and connections, including cleaning for re fixing or removal to store complete all as specified & direcetd. |
| 62 | M&L 3-layer PP-R Polypropylene random copolymer) concealed pipes Outer diameter of pipes 25 mm SDR 7.4 (PN16) UVstabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to wall,ceiling or in floor etc including Taking up or down existing tubing and connections complete all as specified and directed by Engr-in-Charge. |
| 63 | S&F in repair PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including all connection & fitting complete all as specified and direction by Engr-in-charge. |
| 64 | S&F in repair PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor sincluding all connection & fitting complete all as specified and direction by Engr-in-charge. |
| 65 | S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified & direcetd. |
| 66 | S&F in repairs 2nd class softwood (exc 6 & n.exc 13sq.ch) plain fillets square, rectangular in section, clean sawn, secured with nails or brads complete all as specified & direcetd. |
| 67 | S & F in repairs for readymade soft wood wall panelling in strips of 100mm width 9-10mm thickness having tongue and groove fixing arrangement fixed to wooden frame work as per manufacturer instruction of any description complete all as specified and directed. |
| 68 | S & F in repairs Second class soft wood in Scantling as in wall & roof frame work complete all as specified and directed by Engr-in-Charge. |
| 69 | S & F in repairs for readymade soft wood ceiling panelling in strips of 100mm width 9-10mm thickness having tongue and groove fixing arrangement fixed to wooden frame work as per manufacturer instruction of any description complete all as specified and directed. |
| 70 | S&F in repair HDF based laminated wooden flooring planks of size 1.20m x 0.198m x 8 mm thick non glue laminated flooring including 0.6mm PE poly moisture foam as underlay barrier with overlapping 20cm, fixed with adhesive tape. Boarding fixed in floating manner based on tongue and groove interlocking arrangement of any description complete all as specified and directed. |
| 71 | S&F in repair vitreouschina unrinal,half stall type,white complete including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm,long brass screws, pointing around urinal back in cement ,including 32mm waste coupling of PTMT (half or full threaded ) complete all as specified and directed by Engr-in-charge |
| 72 | M&L for French polishing on surface of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coat |
| 73 | Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. |
| 74 | Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 75 | Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed. Please Enable Macros to View BoQ information |
