|
| 1 | Demolition of Concrete in ground floors and paving n.exc 15 cm thickness (below or above ground level), cement concrete ( un reinforced), etc complete all as specified and directed. |
| 2 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 3 | Demolition of Concrete of any description and in any position not otherwise specifically provided for, cement concrete ( un reinforced), etc complete all as specified and directed.( For sunken) |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, etc complete all as specified and directed. |
| 5 | Demolition of reinforced cement concrete as in chimney, Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work complete all as specified and directed. |
| 6 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and directed. |
| 7 | Taking down, Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame),etc complete all as specified and directed. |
| 8 | Taking down shutter of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each and removing from site complete all as specified and directed. |
| 9 | Taking down shutter for , easing, adjusting of old wooden shutters of any description exc. 1 Sq,m and not exc. 2 Sq.m each and refixing in same opening after tiling work complete all as specified and directed. |
| 10 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 11 | M&L for RCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate)as in chajjas / cooking shelves/platform etc. complete all as specified and as directed. |
| 12 | M&L for cement concrete (1:5:10) type E-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 13 | M & L Brickwork cement mortor 1:6 with flyash bricks, straight or curved on plan exc 6m mean radius built in etc complete all as specified and as directed.. |
| 14 | M & L Brickwork cement mortor 1:4 with flyash bricks, straight or curved on plan to any radius in half brick thick walls built in etc complete all as specified and as directed.. |
| 15 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.. |
| 16 | S&F 2mm Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed.. |
| 17 | M&L for 18mm Plywood, grade BWP, 07 No ply type BB fixed with screws to timber frame work complete all as specified and as directed.. |
| 18 | S&F in repair 18/19 mm thick HDMR board fixed as cupboard shelves including necessary batten for holding and fixing leaping on front side complete all as specified and as directed.. |
| 19 | M&L for Decorative laminate 0.9mm type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 20 | S&F Steel windows made of MS sheet 1.25 mm thick box type (primer coated) ERW hollow ‘P’ section of size 60 mm x 25 mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1 mm thick & openable leaf consisting two Nos sash bars of ‘T’ section 20 x 3 mm complete welded to frame including cutting holes & making good dismantled portion in PCC 1:2: 4 type B1 four Nos for each window including following fitting welded to shutter ;- (a) Hold fast 150 mm long 12 mm x 3 mm made to shape -04 Nos(b) Handle of ‘Z’ section 20 x 25 mm , 100 mm long 01 Nos each leaf.(c) MS tower bolt 150 mm long 02 Nos each leaf.(d) ‘Z’ section 20 x 25 mm , 100 mm stopper-01 Nos each leaf.(e) Cleat 55 mm long of hollow square 15 x 20 x 63 mm welded to hinges-01 Nos per leaf.(f) MS box type hinges of size 75 x 12 mm -02 Nos per leaf.(g) Fabrication & fixing complete. |
| 21 | All as per item above here-in-before but without sash bars complete all as specified and directed. |
| 22 | S & F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed. |
| 23 | M&L for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 24 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. |
| 25 | S&F Factory made PVC solid single door frame (chowkats) of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in SSR part-II 2004 Section-8, clause 8B.3 to 8B.3.2 and shown on drawing in SSR complete all as specified and directed. |
| 26 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and a gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site all as specified in SSR complete all as specified and directed. |
| 27 | S&F Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed by the Engineer-in-Charge |
| 28 | S&F Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and as directed by the Engineer-in-Charge |
| 29 | S & F for flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 30 mm ,etc complete all as specified and directed. |
| 30 | S & F for 2nd class HW rail and style, thickness of shutters,35 mm, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, etc complete all as specified and directed. |
| 31 | S & F 35 mm,2nd class hard wood factory made, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all as specified and directed. |
| 32 | S & F 250mm long mild steel ordinary rat tail rod pattern door spring including roller and roller plate complete all as specified and directed. |
| 33 | S & F in repairs floor door stopper of aluminium alloy body 140 mm cover plate and tongue , anodized with hard drawn steel spring fixed complete all as specified and directed.. |
| 34 | S&F 100mm size hasp and staple safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.. |
| 35 | S&F stainless steel 100 mm size auto soft closing hinges fixed with stainless steel screws ISI marked complete all as specified and directed.. |
| 36 | S&F 75mm Aluminium handles, cast type, anodised complete all as specified and directed. |
| 37 | S & F Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.. |
| 38 | S&F sheet glass of ordinary quantity 3mm thick and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 39 | S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.. |
| 40 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or bricks surrounds, glazed with putty or fixed with beads and providing 3 mm thick sheet glass, pin head type and glazing with oil putty / wooden beads using 1st class hard wood in square n exc 0.5 Sqm in each pane complete all as specified and directed.. |
| 41 | S&F 75 mm size butt hinges, medium weight, cold rolled, mild steel complete all as specified and directed. |
| 42 | S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.. |
| 43 | S&F 250 mm long MS sliding door bolt, plate type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 44 | S&F 125 mm size, aluminium anodized handles, cast type complete all as specified and directed. |
| 45 | M & L for rendering 15 mm thick on fair faces of brick wall or concrete surfaces finished fair & even in CM 1:6 complete all as specified and directed. |
| 46 | M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished fair & even in CM 1:4 mixed with water proofing compound complete all as specified and directed.Note:- water proofing compound shall be measured and paid seperately |
| 47 | M & L for rendering 5 mm thick on brick or concrete surface of ceiling finished fair & even in CM 1:3 complete all as specified and directed. |
| 48 | Supply only integral water proofing compound complete all as specified and directed. |
| 49 | M & L for two coats of interior acrylic distemper on new ceiling surfaces, including preparation of surfaces complete all as specified and directed. |
| 50 | M & L for preparation of newly plastered surfaces of wall and applying two coats of interior acrylic distemper including preparation of surfaces on walls complete all as specified and directed. |
| 51 | M&L for Preparation of new plastered wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty upto 2mm thick as required on wall surfaces, (preparatory to paint as directed), complete all as specified. (b) Priming plastered or unplastered surfaces of walls with alkali resistant priming paint, complete all as specified.(c) Two coats exterior acrylic emulsion paint white or coloured on wall surfaces |
| 52 | M & L for preparation of old plastered surfaces of wall and applying one coat of interior acrylic distemper including preparation of surfaces on walls complete all as specified and directed. |
| 53 | M&L for Complete removal of existing treatment from brick walls or concrete surfaces including scraping down smoke spots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc (Plastered or un plastered surfaces) & by removing existing paint by scrapping down mechanical vacuum mechanism having RPM between 600-1500 , sanding paper of 60/80 grit having dia of 7\\"/9\\" to make the surface free from dust , loose paint etc. by skilled labour applying two coats of exterior emulsion paint (Apex) including wall care putty 2mm thick over a coat of alkali resistant paint complete all as specified and directed by Engineer-in-charge. |
| 54 | M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed. |
| 55 | M&L for preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.. |
| 56 | M&L for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamelled paint including preparation complete all as specified and directed. |
| 57 | M&L for preparation of old painted wooden surface and applying one coat of synthetic enamel paint including preparation complete all as specified and directed. |
| 58 | M&L for Granite 18 mm-22 mm work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including 20mm thick screed bed in CM (1:6) for laying of Granite slab & pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 59 | M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 60 | M&L for 75mm thick cement concrete1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection joint filled with bitumen sand mixer 50mm thick finished even and smooth without using extra cement complete all as specified and directed. |
| 61 | M&L for coloured Glazed ceramic tiles in vertical surface exc. 0.13 Sqm but n. exc 0.19 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match including Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as backing coat complete all as specified and directed. |
| 62 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:4 complete all as specified and directed. |
| 63 | M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:4 complete all as specified and directed. |
| 64 | All as per item No. 63 above but in Dado/Skirting including Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces as backing coat. & including taking down plaster complete all as specified and directed. |
| 65 | M & L for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:4 etc complete all as specified and directed. |
| 66 | All as per item No. 65 above but in Dado/Skirting including rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces as backing coat. & including taking down plaster complete all as specified and directed. |
| 67 | M & L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub base floor complete all as specified and directed. |
| 68 | M&L for machine cut kota stone slab flooring 18-20 mm thick over screed bed or bedding layer 20 mm thick in CM 1:6, and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing & polishing complete all as specified and directed |
| 69 | M&L for Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item 13014 including backing coat 10mm thick in CM 1:4 complete all as specified and directed |
| 70 | S&F GI tubes 15mm dia medium grade with all fitting and fixed complete to walls, ceilings or laid in floors including taking down complete all as specified and directed |
| 71 | M & L tubes 20 mm bore dia, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, including taking down complete all as specified and directed. |
| 72 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 73 | S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooling ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 74 | S&F in repairs vitreous china WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and cement concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed. |
| 75 | S&F in repair Vitreous china wash down water closet pan, pedestal pattern (EWC) white, including seat cover , fixing bolts connection to trap & to flush pipe complete all as specified and directed |
| 76 | S&F in repairs PVC flushing cistern 10 ltr capacity valve less symphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed. |
| 77 | S&F in repair Vitreous China wash basin, white, flat back, size 550x400 mm aps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 78 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 79 | S&F in repairs steel plate rack made of stainless steel 0.6 mm thick over all size 610 X 760 X 254 mm complete all as specified and directed. |
| 80 | S & F in repair 600 mmx450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC buildg board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed. |
| 81 | S&F in repairs concealed stop cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. |
| 82 | S&F in repairs stop cock/angle cock with long shank cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed. |
| 83 | S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed. |
| 84 | S&F in repair centre hole basin mixture of 15mm bore cast copper alloy, fancy type chromium plated, screwed down high pressure,, screwed for iron pipe and fixed complete all as specified and directed.. |
| 85 | S&F in repair brass chromium plated shower roses with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and directed. |
| 86 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm, complete all as specified and directed. |
| 87 | S & F in repairs Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed. |
| 88 | S&F in repair stainless steel curtain rod size not less than 20 mm bore, cut to size and erected in position including provision SS brackets & SS decorative type finial (Two nos for each opening) complete all as specified and directed. |
| 89 | M&L for 15mm thick rendering in 1:3 CM with using 3% WPC as in sunken portion complete all as specified and directed. |
| 90 | M&L for applying evenly a tack coat of industrial bituminous 85/25 @ 1.20 Kg per square mtr including cleaning surfaces complete all as specified and directed. |
| 91 | M&L for LDPE sheet 150 micron laid over a coat of industrial bitumen , complete all as specified and directed. |
| 92 | S&F in repair 75mm dia PVC floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4 ) complete all as specified and directed. |
| 93 | S&F in repair 75 mm dia PVC (SWR) pipes single socketed, in any length with or without rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 94 | S&F in repair 110mm dia PVC (SWR) pipes single socketed, in any length with or without rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 95 | S & F in repair 75mm dia PVC (SWR) pipes single socketed, in any length with or without rubber ring joints, fixed to walls complete all as specified and directed. |
| 96 | S & F in repair for 110 mm dia PVC (SWR) pipes single socketed, in any length with or without rubber ring joints, fixed to walls, complete all as specified and directed.. |
| 97 | S & F in repair PVC (SWR) bends any radius, bore of pipe in 75 mm, complete all as specified and directed. |
| 98 | S & F in repair PVC (SWR) bends any radius, bore of pipe in 110 mm, complete all as specified and directed. |
| 99 | S & F in repair 110mm PVC (SWR) vent cowl complete all as specified and directed. |
| 100 | S & F in repair 75mm PVC (SWR) bore Bends with oval access door etc complete all as specified and directed. |
| 101 | S&F in repair 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed. |
| 102 | S&F in repair 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed. |
| 103 | S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to Fe-410- W (Gde E-250) Grade A complete all as specified and as directed.Note :- This item includes fixing of cooler stands upto First floor level necessary Scaffolding is included in this item. Nothing extra will be paid to the contractor. |
| 104 | Dismantling of wrought iron of mild steel work of any description in any position not otherwise specifically provided for complete all as specified and directed. |
| 105 | Notes: Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline. Please Enable Macros to View BoQ information |
