|
| 1 | Concrete with 4cm(1½\\"). Gauge brick ballast, Coarse sand and cement in proportion of 8:4:1 in foundation and under floor, including supply of all material Iabour and T&P etc.required for proper completion of the work. SI-275 |
| 2 | R.C.C. work with cement approved coarse sand and 2 cm (3/4\\") gauge approved stone ballast in the proportion of 1:2:4 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.l. binding wire and includuing Necessary centering and shuttering etc.and also including supply of all materials, labour and T&P etc. required for proper completion of the work. Binding wire cost being included in the item.SI-283 |
| 3 | First class brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work.SI-305 |
| 4 | 12 mm thick plaster over brick work minimum thickness not to be less than 3/8\\" (10 mm) thick with cement and coarse sand Mortar in 1:4, including supply of all materials, labour and T&P etc. required for proper completion of the work. SI-584 (i) |
| 5 | Supply and fixing of 32mm thick flush Doors commercial quality conforming to I.S. 2202 Part I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally.SI-470(I) |
| 6 | Mild steel or iron work of small size and sections such asfabrication of door and window fram including cost of hings etc. (when not included in an over all rates) wrought to required form, including of supply of steel, boalts nuts and wastage etc. and there fixing required for proper completion of work.SI-502(b) |
| 7 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage and over lapping & hooks.SI-504 |
| 8 | 2.5 cm (1 thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm.(3/4\\")graded approved stone shingle laid in panels finished with 3 mm.(1/8\\")floating coat of neat cement or cement and marble dust in 5:1 as specified over &but without base concrete and giving them a uniform finish including supply of all materials, labour' and T&P etc. requierd for proper completion of the work.SI-601(a) |
| 9 | Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.D.S.R. 13.26 |
| 10 | Distemper one coat with oil bound distemper of approved brand manufacture and required shade on previously old distemper surfaces including cost of all materials.SI no. 651 |
| 11 | item same as above but second coat on previous surface.SI no. 650 |
| 12 | Finishing walls with' one coat. of water' proof cement paint of approved quality of previously' old 'treated surface with this paint to give an even shade including supply of all materials, labour 'and T&P etc. required for the proper completion of the work. SI no. 662 |
| 13 | Same as above but for each coat of water proof cement paint after the first two coat to give even shade. SI no. 661 |
| 14 | Painting one coat over but on previously painted old surface with paint of wood or steel snd other metal surface with superior synthetic enamel standard make brushing to give an even shade and finish and includjng cleaning the surface of all dirt dust and other foreign matter sand papering and stripping including cost of all materials ,labour ,T&P etc required for the proper complition of the work. S.I. NO. 3(iii) |
| 15 | Item same as above but second coat. |
| 16 | White washing two coat, including supply of all materials, labour & T&P etc. required for proper completion of the work.SI-672 |
| 17 | Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in-Charge within distance of 60 mt. (200 ft.).SI-708 |
| 18 | Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or Strap, 10 litre low level white P. V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. D.S.R.-17.1.1 |
| 19 | Providing and fixing 10 litre capacity-White P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. DSR-17.18.1 |
| 20 | Providing and fixing white vitreous china wash basin Flat back wash basin of size 630x450mm including making all connections but excluding the cost of fittings. DSR-17.25.1 |
| 21 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.DSR-17.31 |
| 22 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. linternal work - Exposed on wall. |
| 23 | 15 mm dia. nominal bore. DSR-18.10.1 |
| 24 | 20 mm dia. nominal bore. DSR-18.10.2 |
| 25 | Providing and fixing brass bib cock of approved quality |
| 26 | 15 mm nominal bore. DSR-18.15.1 |
| 27 | 20 mm nominal bore. DSR-18.15.2 |
| 28 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.DSR-18.48 |
| 29 | Providing and fixing 15 mm dia. Nominal size C.P. brass bib cock of approved quality conforming to IS:8931.DSR-18.49.1 |
| 30 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. DSR-18.53.1 |
| 31 | Providing and fixing on wall face unplasticised Rigid PVC 110 mm dia. rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i)Single socketed pipes. DSR-12.41.2 |
| 32 | Providing and fixing ply proof galvanised M.S. wire Guage to window average with of apprture 1.4 mm in both direction with wire of dia 0.63 mm with 2nd class teak wood beading 62 x 19 mm S.O.R. no. 9.51.1 |
| 33 | Renewing glass pares with Putty and Nails wherever necessary including racking out old putty. DSR no. 14:5:1 |
| 34 | Supply & fixing 6 mm (1/4\\") China white glazed in flooring or skirting dado laid with 1:3 cement and approved coarse sand mortar finished white cement slurry jointing and polishing complete including supply of all materials, labour and T&P etc. required fo proper completion of the work. S.O.R. no. 628 Please Enable Macros to View BoQ information |
