|
| 1 | Dressing of bed and preparation of sub grade for CC lining in pick work complete in all respect including all leads and Lifts as per the direction and satisfaction of Engineer-In-Charge. |
| 2 | Excavation in drains and channel etc. in earth work including dressing of sides, beds and disposing of excavated earth upto alead of 20 mtrs. Lift upto 1.50 mtrs. Disposed earth to be levelled and neatly dressed in pick work complete in all respect as per direction and entire satisfaction of the Engtineer-in-charge. |
| 3 | Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering , and propping etc. height of propping and centring below supporting floor to ceiling upto all height and removal of the same for in-situ-reinforced concrete and plain concrete work in: Vertical surfaces such as walls, any thickness partitions buttresses plinth and string courses and the like complete in all respect as per the direction and to the entire satisfcation of Engineer-in-Charge within all leads and lifts. |
| 4 | (Form work for Duct line drain) Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like complete in all respect including all leads and Lifts as per the direction and to the entire satisfaction of Engineer-In-Charge. |
| 5 | Providing and laying cement concrete work 1:3:6 (1cement:3sand:6graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in Foundation, footings, bases of columns etc and mass concrete complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge. |
| 6 | Brick work using burnt clay building brickes in super structurein cement motor 1:6(1 cement : 6 sand) complete in all respect with in all leads and lifts.as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 7 | Providing wood work in frames of door, windows, clearstorey windows and other frames wrought, framed and fixed in position in 1st Class deodar wood complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge. |
| 8 | Providing & fixing 40x3mm flat iron hold fasts 40cm long i/c fixing in frames with 100mm diameter bolts nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm in CC 1:3:6 (1cement: 3sand: 6 graded stone agg. 40mm nominal size) complete in all respect as per direction and to the entire satisfaction of Engineer- in- charge up to all leads and lifts. |
| 9 | 15mm thick cement plaster in single coat on rough side of brick/stone masonary for interior plastering upto floor two level including arrises internal rounded angle chamber and orrounded angles not exceeding 80mm in girth and finished even and smooth in Cement Mortor 1:6 (1 Cement: 6 Sand) as per the direction of Engineer-in-Charge with in all leads and lifts. |
| 10 | 20mm cement plaster in single coat on rough side of brick/ concrete /stone walls for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6(1cement:6sand) complete in all respect as per the direction and to the entire satisfication of Engineer-in-Charge with in all leads and lifts. |
| 11 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clearstorey windows including black enamelled iron but hings with necessary screws 45mm thick in 1st class Deodar wood 40 mm thick complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge. |
| 12 | Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of IS gauge designation 85-G with wire of dia 0.56mm for doors, windows and clearstorey windows including bright finished / black enamelled iron hings with necessary screws: 1st class Deodar wood 40 mm thick complete in all respect as per the direction and to the entire Satification of Engineer-in-Charge with in all leads and lifts. |
| 13 | Providing and fixing Toughened frosted glass panes with putty and nails including removal of broken glass panes glass panes where ever necessary complete in all respect as per the direction and to the entire satisfaction of Engineer-In-Charge with in all leads and Lifts. |
| 14 | 6mm Thick |
| 15 | Providing and laying spartic ceremic tiles 5.5mm.thick in flooring (300 x450mm size) treads of steps laid on a bed of12mm thick cement mortar 1:3 (1cement: 3 sand) finished with flush pointing in white cement complete as directed by the Engineer-Incharge including carriage of materials within all leads, lifts and other incidentals. |
| 16 | Applying birla white wall care putty over plaster surface after throughly brushing the surface free from mortar drops, dust, loose materials and other foreign matter sand papered smooth to give final matter finish to the surface complete in all respect as per the direction and the entire satisfaction of Engineer-in-Charge within all leads and lifts. |
| 17 | Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including thoroughly brushing the surface free from mortor droppings and other foreign matter and sand prepared smooth including applying of putty a required for making the surface complete in all respect as per the direction and to the entire satisfication of Engineer-in-Charge within all leads and lifts. |
| 18 | Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter, sand papering & knotting ready mixed paint brushing wood primer pink as per the direction of Engineer-in-Charge with in all leads and lifts |
| 19 | Painting two coats (excluding priming coat) on new wood and wood based surfaces ready enamel paint brushing to give an even shade including cleaning of all dirt, dust and other foreign matter complete in all respect as per the direction and to the entire satisfication of Engineer-in-Charge with in all leads and lifts. |
| 20 | Providing and fixing of anodized sliding door bolts anodized transparent or dyed to required colour and shade with bolts and nuts screws etc complete in all respect as per the direction and Satification of Engineer-in-Charge with in all leads and lifts. (250x16mm) |
| 21 | Providing and Fixing Aluminium handles anodized transparent or dyed to required colour or shade with necessary screw etc. complete in all respect as per the direction and Satification of Engineer-in-Charge with in all leads and lifts. |
| 22 | (175mm) |
| 23 | (100mm) |
| 24 | Providing and Fixing aluminium Tower bolts (barrel type) anodised transparent with necessary screws etc. complete in all respect as per the direction and Satification of Engineer-in-Charge with in all leads and lifts. |
| 25 | (200x10mm) |
| 26 | (150x10mm) |
| 27 | Providing and fixing of Hydraulic door closer of superior quality complete in all respect including all leads and Lifts as per the direction and to the entire satisfection of Engineer-In-Charge. Please Enable Macros to View BoQ information |
