|
| 1 | B/R PORTION |
| 2 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as directed. |
| 3 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but not exc. 4.0 Sqm each, complete all as directed. |
| 4 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level), complete all as directed. |
| 5 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as directed. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as directed. |
| 7 | Dismantling asbestos cement (corrugated, semi-corrugated etc) sheets in roof coverings, complete all as directed. |
| 8 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as directed. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises, complete all as directed. |
| 10 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as directed. |
| 11 | Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store, complete all as directed. |
| 12 | Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store, complete all as directed. |
| 13 | Surface excavation not exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out, complete all as specified and directed. |
| 14 | Surface dressing not exc 15 cm deep in soft/ loose soil, complete all as specified and directed. |
| 15 | Excavation in trenches, not exc. 1.5 m wide and not exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying pipe, cable, etc. n exc 10 sqm on plan and not exc. 1.5 m in depth and getting out in soft/ loose soil, complete all as specified and directed. |
| 16 | Excavating over areas, not exc.1.5 m deep and getting out in soft/ loose soil, complete all as specified and directed. |
| 17 | Returning filling in soft/ loose soil, including spreading, levelling, watering and well ramming in layers not exc. 25 cm, complete all as specified and directed. |
| 18 | Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level not exc. 1.5 m above the starting point, complete all as specified and directed. |
| 19 | Removing excavated materials to a distance exc.250 m but not exc. 500 metres and depositing where directed at a level not exc. 1.5 m above the starting point, complete all as specified and directed. |
| 20 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/ loose soil, complete all as specified and directed. |
| 21 | Material and labour for sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed. |
| 22 | Material and labour for, hardcore of gauge not exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick in broken stone or boulder, watered and rammed to a true surface, complete all as specified and directed. |
| 23 | Materials and labour for, plain cement concrete (1:4:8) type D2 (using 40 mm graded broken stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed. |
| 24 | Materials and labour for, plain cement concrete (1:3:6) type C2 (using 40 mm graded broken stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed. |
| 25 | Materials and labour for, plain cement concrete (1:2:4) type B2 (using 40 mm graded broken stone aggregate) as in benching of manholes including necessary formworks as required, complete all as specified and directed. |
| 26 | Materials and labour for, plain cement concrete (1:2:4) type B2 (using 40 mm graded broken stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed. |
| 27 | Material and labour for, RCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. (Note: Reinforcement shall be measured and paid separately under relevant item) |
| 28 | Materials and labour for, plain cement concrete (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, copings, kneelers and the like including weathering, slightly rounded or chamfered angles and throating including bituminium gap filling, necessary form work, complete all as specified and directed. |
| 29 | Material and labour for providing precast cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face and set in CM (1:4) including necessary form work, complete all as specified and directed. |
| 30 | Material and labour for, brickwork with subclass ‘B’ bricks, old size, straight or curved on plan exc. 6m mean radius built in cement mortar (1:3), complete all as specified and directed. |
| 31 | Material and labour for, brickwork with fly ash bricks, old size, straight or curved on plan exc. 6m mean radius built in cement mortar (1:6), complete all as specified and directed. |
| 32 | Material and labour for, use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surfaces of concrete, complete all as specified and directed. |
| 33 | Material and labour for, 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 34 | Supply and fix for, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and drawing given in SSR. |
| 35 | Supply and fix for, factory made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, fixed in frame at site as specified and drawing given in SSR. |
| 36 | Supply and fix for, 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame, complete all as specified and drawing given in SSR. |
| 37 | Supply and fix for, solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement, PVC strips/ beading any size/ shape and fixing at site on PVC frame, complete all as specified and drawing given in SSR. |
| 38 | Supply and fix for, 100mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 39 | Supply and fix for, aluminium anodised, barrel tower bolts of extruded section of size 200mm long, complete all as specified and directed. |
| 40 | Supply and fix for, aluminium handles, cast type, anodised 150mm size complete all as specified and directed. |
| 41 | Supply and fix for, 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed. |
| 42 | Supply and fix for, 25 mm dia, fancy type stainless steel drapery rod (curtain rod), complete all as specified and directed. |
| 43 | Supply and fix for, 25 mm dia, stainless steel 304 grade decorative type bracket and side cups for curtain rods fixed with screws, complete all as specified and directed. |
| 44 | Material and labour for venetion blinds carpet foldable type, complete all as specified and directed.Note :- Venetion blinds carpet shall be approved by GE. |
| 45 | Supply and fix in repair for, aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 46 | Material and labour for, rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-290 (Gde E 165), complete all as specified and directed. |
| 47 | Supply and fix for, bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed. |
| 48 | Supply and fix for, mild steel framed work such as framed guard bars conforming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 49 | Supply and fix for, rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410 -W (Gde- E- 250) quality- A, complete all as specified and directed. |
| 50 | Supply and fix for, rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified and directed. |
| 51 | Supply and fix for, mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 52 | Material and labour for, mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 53 | Supply and fix for, pressed steel frames 105 x 60 mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 54 | Supply and fix for, anodised aluminium frame powder coating (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 55 | Supply and fix for, anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos, 100 mm long hinges - 03 Nos, sliding bolts - 01 No., tower bolt - 02 Nos in each door, powder coated aluminium snap beading and rubber gasket, screws etc. in each door, complete all as specified and directed. |
| 56 | Supply and fix for, anodised aluminium powder coated (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges type B-21, 100 mm long - 02 Nos, suitable handle - 01 No., complete all as specified and directed. |
| 57 | Supply and fix for, powder coated (minimum thickness of powder coating 50 micron) aluminium sliding window shutters 25 mm thick with frame (consisting of 02 Nos glazed shutters and 01 No. gauge shutter), 3 track sliding shutters, duly fitted with neoprene beading, glazed clips, locking device, heat absorbing glass 4.0 mm nominal thickness in glazed shutters, stainless steel wire mesh of 0.254 mm nominal dia of wire and 0.95 mm average width of aperture in gauged shutter and powder coated aluminium grill 4 mm dia, 75 x 75 mm aperture fixed with standard aluminium beading fixed in outer portion of the chowkat, complete all as specified and directed. |
| 58 | Supply and fix for, powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified and directed. |
| 59 | Material and labour for, 4 mm thick aluminium composite panel board of minimum tensile strength 4.5 Kg/ Sqmm fixed in aluminium frame work, complete all as specified and directed. |
| 60 | Supply and fix for, steel rolling shutters, thickness of laths 1.25 mm with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, completegear operated type with bevel gear box and crank handle, complete all as specified and directed. |
| 61 | Supply and fix for, pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or 'J'/ 'L' hooks, complete all as specified and directed. |
| 62 | Supply and fix for, pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, gutters, facia board etc. fixed with self tapping screws or 'J'/ 'L' hooks, complete all as specified and directed. |
| 63 | Supply and fix for, mild steel sheet 1.0 mm thick, 150 mm dia eaves gutters, galvanised class 3, half round with rounded edges, complete all as specified and directed. |
| 64 | Supply and fix for, powder coated galvanised iron snap grid frame work of size 600 x 600 mm for false ceiling comprising of main runner 'T' section of size 38mm x 24mm x 0.4mm thick, cross section 'T' of size 29mm x 24mm x 0.3mm thick and wall angle of size 24mm x 24mm x 0.43mm thick suspended with 4mm dia GI wire from purlin @ 1.2m c/c including 4mm thick designer AC ceiling boards, complete all as specified and directed. |
| 65 | Material and labour for, 75mm thick plain cement concrete (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in sub base floor, complete all as specified and directed. |
| 66 | Material and labour for, 100 mm thick plain cement concrete (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in sub base floor, complete all as specified and directed. |
| 67 | Material and labour for, 25 mm thick plain cement concrete (1:2:4) type B0 (using 12.5mm graded broken stone aggregate) as in sub base floor, finished the surface even and rough to receive screeding, complete all as specified and directed. |
| 68 | Material and labour for, 100 mm thick plain cement concrete (1:2:4) type B1 (using 20 mm graded broken stone aggregate) as in sub base floor, finished the surface even and smooth without using extra cement with spike rolling to surface or making impression of expanded metal, whilst the concrete is green, complete all as specified and directed. |
| 69 | Material and labour for, forming construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A', complete all as specified and directed. |
| 70 | Material and labour for, joint free non skid ceramic coloured tiles, 7 to 8mm thick (square/ rectangular) area of each tile exc.0.11 Sqm but not exc.0.18 Sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding in cement mortar (1:6), complete all as specified and directed. |
| 71 | Materials and labour for, glazed ceramic coloured tiles, 450 X 300 X 6 to 7 mm thick, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in cement mortar (1:4), complete all as specified and directed. |
| 72 | Material and labour for, joint free vitrified ceramic light shade tiles, 10 mm thick (square/ rectangular) polished, area of each tile not exc.0.36 Sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding in cement mortar (1:6), complete all as specified and directed. |
| 73 | Material and labour for, joint free vitrified ceramic light shade tiles, 10 mm thick (square/ rectangular) polished, area of each tile not exc.0.36 Sqm as in skirting/ vertical surface, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in cement mortar (1:4), complete all as specified and directed. |
| 74 | Material and labour for, machine cut kota stone slab flooring 20-25 mm thick over and including 20 mm thick screed base in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 75 | Material and labour for, kota stone slab 18-20 mm thick as in riser of steps, skirting, dado and pillar over and including 10 mm thick backing coat in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 76 | Material and labour for, granite (of any type) tiles 15 to 18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 77 | Material and labour for 60mm thick, M-35 grade, machine pressed precast cement concrete interlocking paver block any shape and size confirming to IS 15658-2006 jointed with grey cement and pigment including 50mm thick sand layer to receive interlocking tiles including spreading, levelling in layers, complete all as specified and directed. |
| 78 | Material and labour for, designed, prepainted coloured chequered cement concrete tiles of size 30cm x 30cm x 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed or bedding in cement mortar (1:6), complete all as specified and directed. |
| 79 | Material and labour for, providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed. |
| 80 | Material and labour for, rendering 10 mm thick, cement plaster, in cement mortar (1:6) on fair faces of brick work or concrete surfaces on walls, finished even and smooth without using extra cement, complete all as specified and directed. |
| 81 | Material and labour for, rendering 15 mm thick, cement plaster, in cement mortar (1:6) on fair faces of brick work or concrete surfaces on walls, complete all as specified and directed. |
| 82 | Material and labour for, rendering 5 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.(Note: Water proofing compound shall be measured and paid seperately under relevant item). |
| 83 | Material and labour for, rendering 15 mm thick, cement plaster, in cement mortar (1:3) mixed with water proofing compound as per manufactures instructions on other than fair faces of brick work or concrete surfaces or one side of lathing on walls, complete all as specified and directed. (Note: Water proofing compound shall be measured and paid seperately under relevant item). |
| 84 | Supply only integral water proofing compound complete all as specified. |
| 85 | Material and labour for, applying two coats of oil bound distemper over a coat of alkali resistant primer after preparing of new plastered wall surfaces with 1.5 mm thick wall care putty, complete all as specified and directed. |
| 86 | Material and labour for, preparation of newly plastered wall surfaces and applying two coats of weather proof exterior emulsion paint of camouflage design over a coat of primer, complete all as specified and directed.Note :- Shade of camouflage pattern shall be approved by GE. |
| 87 | Material and labour for, complete removal of existing treatment of old external wall surfaces and applying two coats of weather proof exterior emulsion paint of camouflage design over a coat of primer, complete all as specified and directed.Note :- Shade of camouflage pattern shall be approved by GE. |
| 88 | Material and labour for, complete removal of existing treatment of old internal wall surfaces and applying two coats of oil bound distemper after preparing of wall surfaces with 1.5 mm thick wall care putty, complete all as specified and directed. |
| 89 | Material and labour for, 4mm thick sheet glass, ordinary quality and glazing exc 0.5 sqm in each pane fixed with neoprene rubber gasket in aluminium frame work, complete all as specified and directed. |
| 90 | Material and labour for, preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 91 | Material and labour for, preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 92 | Material and labour for, preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 93 | Supply, hoisting and fixing in position of rotational moulded HDPE water storage tanks 3 layers (cylindrical vertical with closed top) of 1000 litres capacity with ISI marked including 20mm bore dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and dismantling old unserviceable water tank, complete all as specified in SSR Part I and directed. |
| 94 | Supply and fix in repair for, 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed. |
| 95 | Material and labour for, cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed. |
| 96 | Supply and laying of 16 mm outer dia CPVC pipes SDR 11 and Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and directed. |
| 97 | Supply and laying of 20 mm outer dia CPVC pipes SDR 11 and Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, complete all as specified and directed. |
| 98 | Supply and fix in repairs for, bib tap, fancy type, long body, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15 mm bore, complete all as specified and directed. |
| 99 | Supply and fix in repair for, pillar taps, fancy type, cast copper alloy, chromium plated, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe, complete all as specified and directed. |
| 100 | Supply and fix in repairs for, 15 mm bore chromium plated, fancy type, angle valve with elegant knob screwed down high pressure, with crutch or butterfly handle screwed for iron pipe or for unions, complete all as specified and directed. |
| 101 | Supply and fix in repairs for, vitreous china wash down water closet pan (EWC) (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 102 | Supply and fix in repair for, plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 103 | Supply and fix in repairs for, PVC valveless, syphonic action type, flushing cistern 10 litres capacity, low level, white, with inlet, ball valve, float and handle with flush pipe of PVC 32mm dia including cutting and pinning in ends, complete all as specified and directed. |
| 104 | Supply and fix in repair for, vitreous china pedestal wash basin, white, flat back, size 550 x 400mm excluding taps, chain and plug and porcelain stopper but including one no chromium plated waste pipe fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed with and including 32 mm dia PVC waste pipe with connector including cutting for and pinning in ends of brackets, complete all as specified and directed. |
| 105 | Supply and fix in repair for, vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), connection to trap and to flushing cistern anti syphonage pipe including provision of PCC or lime concrete bedding and removal of debris, complete all as specified and directed. |
| 106 | Supply and fix for, vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing, grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed |
| 107 | Supply and fix in repair for, PVC connections 15mm size with 2 Nos PTMT nuts of length 450mm, complete all as specified and directed. |
| 108 | Supply and fix in repairs for, health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.0 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 109 | Supply and fix in repair for, 600mm x 450mm bevelled edge mirror of selected quality 5.5 mm thick glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 110 | Supply and fix in repair for, sheet glass shelf assembly consisting of 5.0 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 111 | Supply and fix in repair for, toilet paper holder with flat recessed type stainless steel fixed to wall with chromium plated brass screws, complete all as specified and directed |
| 112 | Supply and fix in repair for, soap dish, stainless steel, fixed to plugs with chromium plated brass screws, complete all as specified and directed. |
| 113 | Supply and fix for, 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down old unserviceable pipe, complete all as specified and directed. |
| 114 | Supply and fix for, 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with suitable size flat iron MS clamps including nuts bolts etc., including taking down old unserviceable pipe, complete all as specified and directed. |
| 115 | Supply and fix for, 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down old unserviceable pipe, complete all as specified and directed. |
| 116 | Supply and fix for, 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with suitable size flat iron MS clamps including nuts bolts etc. complete all as specified and directed. |
| 117 | Supply and fix in repair for, 75mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 118 | Supply and fix for, 110mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 119 | Supply and fix in repair for, 75mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed. |
| 120 | Supply and fix in repair for, 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed. |
| 121 | Supply and fix in repair for, PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement to waste pipe fixed in cement concrete (1:2:4) type B1, complete all as specified and directed. |
| 122 | Supply and fix in repair for, PVC (SWR) multi floor trap 75 mm dia with grating including jointing with solvent cement to waste pipe fixed in cement concrete (1:2:4) type B1, complete all as specified and directed. |
| 123 | Supply and fix in repair for, 110 mm bore PVC (SWR) vent cowl, complete all as specified and directed. |
| 124 | Material and labour for, reinforced concrete pipes, 150mm bore class NP2 complete with collars, laid in trenches and jointed in cement mortar, complete all as specified and directed. |
| 125 | Material and labour for, concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in plain cement concrete (1:3:6) type C2 (using 40mm graded broken stone aggregate) for 150mm bore RCC pipe, complete all as specified and directed. |
| 126 | Material and labour for, soakage well including excavation in any type of soil , foundation in PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate), walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonry in cement mortar, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/ DWC complete filled with brick bats, size of 1.8 metre dia and 3.0 metre effective depth complete all as specified and directed. |
| 127 | Material and labour for, on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in foundation, vent shaft, connection etc. for 25 users, complete all as specified and directed. |
| 128 | E/M PORTIONTaking down carefully existing copper/aluminium point wiring (light, fan, socket or power) complete with all fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as directed. |
| 129 | Supply and fix for, point wiring complete with 1100 volts grade, FRLS, 1.5 Sqmm, single core, PVC insulated, unsheathed multistranded copper conductor cable, conforming to IS-694 drawn through and including medium grade PVC conduit (ISI marked) of minimum 20mm dia including all accessories concealed in walls/ floors/ ceiling and surface type on existing roofs etc. including provision of 1100 volts, FRLS grade, 1.5 Sqmm, single core, PVC insulated, unsheathed multistranded copper conductor cable as earth continuity conductor with colour coding and connecting to common earth dolly at one and metallic bodies of luminaire/ fan at other end including PVC folding boards with sunmica top for mounting switches, sockets, fan regulators, accessories etc. as per site requirement for one light/ fan point controlled by one switch and testing on completion, complete all as specified and directed. Note: Unit rate shall deem to be included cutting chases for conduits whereas required and sinking for boxes and making good to wall floors etc. |
| 130 | All as per serial item No.129.00 here-in-before but for one 3 pin 5 Amps socket outlet, 5 Amps on independent board. |
| 131 | All as per serial item No.129.00 here-in-before but for one 5 pin 5 Amps socket outlet on same board with other switches. |
| 132 | Supply and fix for, point wiring complete with 1100 volts grade, FRLS, 4.0 Sqmm, single core, PVC insulated, unsheathed multistranded copper conductor cable, conforming to IS-694 drawn through and including medium grade PVC conduit (ISI marked) of minimum 20mm dia including all accessories concealed in walls/ floors/ ceiling and surface type on existing roofs etc. including provision of 1100 volts, FRLS grade, 4.0 Sqmm, single core, PVC insulated, unsheathed multistranded copper conductor cable as earth continuity conductor with colour coding and connecting to common earth dolly at one and metallic bodies of luminaire/ fan at other end including PVC folding boards with sunmica top for mounting switches, sockets, fan regulators, accessories etc. as per site requirement for one 5 pin 15 Amps socket outlet point controlled by one switch of 15/16 Amps on independent board and testing on completion, complete all as specified and directed. Note: Unite rate shall deem to be included cutting chases for conduits whereas required and sinking for boxes and making good to wall floors etc. |
| 133 | Supply and fix for, point wiring complete with 1100 volts grade, FRLS, 1.5 Sqmm, single core, PVC insulated, unsheathed multistranded copper conductor cable, conforming to IS-694 drawn through and including stove enamelled medium grade steel conduit (ISI marked) of minimum 20 mm dia including all accessories fixed on wall, columns/ beamsin walls/ floors/ ceiling and surface type on existing roofs etc. including provision of 1100 volts, FRLS grade, 1.5 Sqmm, single core, PVC insulated, unsheathed multistranded copper conductor cable as earth continuity conductor with colour coding and connecting to common earth dolly at one and metallic bodies of luminaire/ fan at other end including PVC folding boards with sunmica top for mounting switches, sockets, fan regulators, accessories etc. as per site requirement for one light/ fan point controlled by one switch and testing on completion, complete all as specified and directed. Note: Unite rate shall deem to be included cutting chases for conduits whereas required and sinking for boxes and making good to wall floors etc. |
| 134 | Supply and fix for, switch piano, flush type single pole, one way 5 Amp, 230 volts, complete all as specified and directed. |
| 135 | Supply and fix for, socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/ 2 pin plug top, complete all as specified and directed. |
| 136 | Supply and fix for, switch socket combination multipurpose flush type 2 in 1 type 3/5 pin, 5/15 Amp, 230 volts, complete all as specified and directed. |
| 137 | Supply and fix in replacement of ceiling rose, PVC 50mm dia 3 phase including PVC mounting block, complete all as specified and directed. |
| 138 | Supply and fix in replacement of switch flame proof rotary type with termination box in LM6, 16 Amps single pole 250 volts, complete all as specified and directed. |
| 139 | Supply and fix for, LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed. |
| 140 | Supply and fix for, LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. |
| 141 | Supply and fix for, LED flood light 100 watt efficient with die-cast housing integrated PC optics and 150 lm/w efficacy, 4 KV external charge protection, IP66 ingress protection with additional safety chain complete prewired complete, complete all as specified and directed. |
| 142 | Supply and fix for, LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size, complete all as specified and directed. |
| 143 | Supply and fix for, ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including taking down old unserviceable ceiling fan, complete all as specified and directed. |
| 144 | Supply and fix for, exhaust fan, steel body AC single Phase 230V of size 300mm sweep heavy duty with blades and frame and louvers, complete all as specified and directed. |
| 145 | Supply and fix for, wall mounting fans complete with blade and accessories, 230 volts, 400 mm sweep, speed 1350 RPM wall fan doble string, complete all as specified and directed. |
| 146 | Supply and fix in repair for, flame proof exhaust fan 15 inch single phase with louvers and all fittings accessories, complete all as specified and directed. |
| 147 | Material and labour for, submain wiring with 10.0 Sqmm nominal area, two single core, PVC insulated unsheathed multistranded FRLS copper conductor cable including one 10.0 Sqmm PVC insulated unsheathed multistranded copper conductor cable for earth wire drawn through and including PVC concealed conduit of minimum 20mm dia medium grade including cutting chases pinning in making good to facing and pointing in using cement mortar (1:3) to the ends with taking down old unserviceable submain wiring and making good the disturbed surfaces, complete all as specified and directed.Note:- Two runs of main wire, one run of earth wire and one run of PVC conduit shall be measured as one unit. |
| 148 | Supply and fix in repair for, sheet metal enclosure for DB's when MCBs to be used, SPN 240 volts, 4 way 200 Amps rated bus bar, double door type IP-43, complete all as specified and directed. |
| 149 | Supply and fix in repair for, sheet metal enclosure for DB's when MCBs to be used, SPN 240 volts, 8 way 200 Amps rated bus bar, metal double door type IP-43, complete all as specified and directed. |
| 150 | Supply and fix for single pole and neutral enclosure with a two pin and earth plug and socketc complete with one single pole MCB 20 Amps, complete all as specified and directed. |
| 151 | Supply, fixing, testing and commissioning for, 6 to 32 Amp, SP 240 volts 10KA 'C' curve miniature circuit breaker (MCB), complete all as specified and directed. |
| 152 | Supply, fixing, testing and commissioning for, 32 Amp, SPN/DP 240 volts 10KA 'C' curve miniature circuit breaker (MCB), complete all as specified and directed. |
| 153 | Supply and fix for, sheet metal enclosure (factory made), VTPN vertical distribution boards, IP43 & IP44 protection with MCCB's 160 A as incomer, double door, 8way NO of modules I/C XTI 160, O/G 24 Nos with 250 Amps rated copper busbar, complete all as specified and directed. |
| 154 | Material and labour for, air termination, single pointed aluminium rod 12mm dia and 300mm long including taking down with all accessories, complete all as specified and directed. |
| 155 | Material and labour for, test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hex. head screw, complete all as specified and directed. |
| 156 | Material and labour for, aluminium strip 20 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground including taking down with all accessories, complete all as specified and directed. |
| 157 | Supply and fix for, porcelain insulator of size 65 x 65 x 40mm complete with one number GI stud bolts including nut & bolts etc., complete all as specified and directed. Please Enable Macros to View BoQ information |
| 158 | Supply and fix for, porcelain insulator of size 65 x 65 x 40mm complete with one number GI stud bolts including nut & bolts etc., complete all as specified and directed. Please Enable Macros to View BoQ information |
