|
| 1 | Material and Labour for applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete all as specified and directed by Eng-in-Charge. |
| 2 | Material and Labour for applying 2 Coats of Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour as per specified and directed by Eng-in-charge. |
| 3 | Material and Labour for Providing and fixing powder coated aluminium work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron) all as specified and directed by Eng-in-charge. |
| 4 | Material and Labour for Providing and fixing powder coated aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling CP brass / stainless steel screws, all complete as per architectural drawings and the directions of Engr -in- Charge. (Glazing, panelling and dash fasteners to be paid for separately) ( minimum thickness of powder coating 50 micron). (i) For fixed portion : Powder coated aluminium (minimum thickness of powder coating 50 micron) all as specified and directed by Eng-in-Charge. |
| 5 | Supply and fixing glass panes 5.5mm thick with putty and glazing clips in steel doors, windows, clerestory windows, complete all as specified and directed by Eng-in-Charge. |
| 6 | Supply and fixing of 12mm thick both side prelaminated particle board to aluminium door, partition complete all as specified and directed by Eng-in-Charge. |
| 7 | Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, with 75mm overall thickness Partition with 12mm thick double skin Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm,Bending Strength 100 kg/sq.cm including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of damp proof primer suitable for board as per manufacture's specification and direction of engineer in charge as directed. |
| 8 | Supply and fixing aluminium extruded section body universal type hydraulic door closer ( having brand logo with ISI , Is : 3564, embossed on the body, door weight upto 36 to 80 kg and door width from 701 to 1000mm) with double speed adjustable with necessary accessories and screws etc complete all as specified and directed by Eng-in-Charge. |
| 9 | Supply and fixing aluminium Twin rubber stopper hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete all as specified and directed. |
| 10 | Supply and fixing 200x10mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : all as specified and directed by Eng-in-Charge. |
| 11 | Supply and fixing Brass 100mm mortise latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc complete all as specified and directed. |
| 12 | Material and Labour for fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38mm of length 3000 mm, cross - T of size 24x32 mm of length1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm , suspended from ceiling using galvanised mild steel items (galvanizing@ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws With 15 mm thick regular/butt edged without perforation plain/ designer light weight calcium silicate Anti-Microbial Bio-Safe coated false ceiling tiles Confirming to JIS-Z2801 and ASTM G-21. The work shall be carried out as per specifications, drawing and as directed by Engineer-in Charge. |
| 13 | Material and Labour for Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., Hot finished welded type tubes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete all as specified and directed by Engineer-in-charge. |
| 14 | Taking down old unserviceable Light fittings of any type and capacity complete. |
| 15 | Supply and Fixing of Group A Wiring for light point/exhaust fan point/call bell point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box (for surface fixing heavy duty PVC box thickness 2.5 mm to 3 mm) and earthing the point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable etc as required. |
| 16 | Supplying and Fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc.complete all as specified and directed by Eng-in-Charge. |
| 17 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate complete all as specified and directed by Eng-in-Charge. |
| 18 | Material & labour for circuit/ submain wiring for Switch socket combination 5A with 2 X 1.5 Sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1X1.5 Sqmm FRLS PVC insulated copper conductor single core cable for loop earthing complete all as specified and directed by Eng-in-Charge. |
| 19 | Material & labour for circuit/submain wiring for Switch socket combination 15 A with 2 X 2.5 Sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 X 2.5 Sqmm FRLS PVC insulated copper conductor single core cable for loop earthing complete all as specified and directed by Eng-in-Charge. |
| 20 | Supply and fixing of 5/6 A modular switch on the existing modular plate & switch box including connections but excluding modular plate etc complete all as specified and directed by Eng-in-Charge. |
| 21 | Supply and fixing of 15/16 A modular switch on the existing modular plate & switch box including connections but excluding modular plate etc complete all as specified and directed by Eng-in-Charge. |
| 22 | Supply and fixing of 3 pin 5/6 A socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc complete all as specified and directed by Eng-in-Charge. |
| 23 | Supply and fixing of 6 Pin 15/16 amps socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc complete all as specified and directed by Eng-in-Charge. |
| 24 | Supply and fixing of 3 Module (100 mm X 75 mm) GI box along with modular base & cover plate for modular switches in recess etc. complete all as specified and directed by Eng-in-Charge. |
| 25 | Supply and fixing of Wiring for circuit/submain wiring with 2 X 4.0 Sqmm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 X 4.0 Sqmm FRLS PVC insulated copper conductor single core cable for loop earthing complete all as specified and directed by Eng-in-Charge. |
| 26 | Supply and Fixing of Indoor LED luminaires down lighter luminaries any type designed 2' X 2' for Recessed mounting which provides soft light and glare free symmetrical illumination suitable for recessed mounting type complete 36W LED complete with driver and fixing arrangement and connected from ceiling rose to LED fitting suitable size PVC insulated copper cable complete all as specified and directed by Eng-in-Charge. |
| 27 | Supply and Fixing of Installation, Testing and Commissioning of 1200 sweep ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos metal( Aluminium alloy) blades, suitable long down rod as per ground requirement- 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Aluminium body Power Factor not less than 0.9 complete all as specified and directed by Eng-in-Charge. |
| 28 | Supply and Fixing 400 mm sweep wall mounted fan copper winded induction motor, Air delivery 90m3/min, Rated speed 2000 revolution per minute, Plastic type Blade design and accessories, 230 volt, 50 Hz complete all as specified and directed by Eng-in-Charge. Please Enable Macros to View BoQ information |
