|
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 2 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 3 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 4 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 5 | 1:4 (1 cement: 4 fine sand) |
| 6 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 7 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 8 | (A) Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) |
| 9 | (B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 |
| 10 | © Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. |
| 11 | (D) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. |
| 12 | (E) Suitable cement concrete foundation duly plastered and with anti vibration pads. |
| 13 | 450 lpm at 35 m Head |
| 14 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : |
| 15 | 100 mm dia |
| 16 | 80 mm dia |
| 17 | 65 mm dia |
| 18 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall |
| 19 | 25 mm dia nominal bore |
| 20 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : |
| 21 | 65mm dia |
| 22 | 80 mm dia |
| 23 | 100mm dia |
| 24 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. |
| 25 | 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 |
| 26 | 20 mm nominal internal dia gun metal globe valve & nozzle. |
| 27 | Drum and brackets for fixing the equipmets on wall. |
| 28 | Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. |
| 29 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 30 | 25 mm nominal bore |
| 31 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : |
| 32 | 2 way-100 mm dia M.S. Pipe |
| 33 | Supplying and fixing air vessel made of 250mm dia, 8mm thick MS sheet, 1200mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required |
| 34 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. |
| 35 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : |
| 36 | 25 mm nominal bore |
| 37 | 65 mm nominal bore |
| 38 | Providing and placing on terrace, polyethylene water storage tank ISI 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet , outlet and overflow pipes but without fittings and the base support for tank. |
| 39 | Fabrication, Supply, Installation, Testing and Commissioning of Electrical Control Panel of cubical construction, Floor/Wall Mounted type, Fabricated out of 2 mm thick CRCA Sheet, compartmentalized with hinged lockable door, dust and vermin proof, powder coated of approved shade , interconnection with suitable size copper condutor cable,having switchgears and accessories mountings and internal wiring, earth terminals, complete in all respect, suitable for Terrace Pump of 7.5 HP Capacity, complete as per CPWD specifications with the following Incoming/outgoings suitable for operation on 415 V / 3 Phase, 50 Hz Supply with enclosures protection. |
| 40 | 4 Pole MCB/TPN 40 Ampere Voltmeter with Selector Switch Ammeter with Selector Switch & CTs etc LED Type RYB Phase Indicating lamps, ON/OFF, Trip Indicating Lamps |
| 41 | Starter suitable for 7.5 HP Pump with overload protection, Single phase preventor, complete with all accessories Internal wiring required and Sensor for automatic operation Selector Switch for auto/manual/off operation |
| 42 | Supplying and fixing MS chequred Plate 5mm thick inclduing cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete in all respects |
| 43 | Providing and Fixing of ABC (Power type) ABC FIRE EXTINGUISHER/ 4 kg HP Mild Steel Cylinders ISI marked approved fitted with pressure indicating gauge capacity complete with discharge horn and mounting it on the wall with a suitable MS bracket (including S/F bracket) minor civil works etc. complete as required of approved make |
| 44 | Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylindrical body, squeeze lever discharge valve fitted with internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 15683 finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge. Capacity 4.5 kg. ISI Marked.( Contractor should submit test certificate form manufacturer along with serial number of every extinguishers supplied.) |
| 45 | Supplying, installing, testing and commissioning of Copper Conductor Cables, XLPE Insulated, unarmoured IS 7098 (Part 1) marked of approved make Havells, Finolex, Polycab to the satisfaction of EIC |
| 46 | 2C x 1.5 Sqmm |
| 47 | 3C x 2.5 Sqmm |
| 48 | 4C x 4 Sqmm |
| 49 | Supplying, installing, testing and commissioning of C.I. Dual Plate Wafer type Non-return Valves PN 16 with SS 304 discs with Nitrile rubber lining as per with required flanges, nuts, bolts and gaskets etc. complete. |
| 50 | 80mm dia. |
| 51 | 100mm dia. |
| 52 | Providing and fixing of G.I. tank Nipple Complete in all respect |
| 53 | 25 mm dia nominal bore |
| 54 | 65 mm dia nominal bore Please Enable Macros to View BoQ information |
