Tender For Execution Of Balance Works Of Training Centre/ Transit C At Rishikesh., Rishikesh-Uttarakhand

TDR : 55110973

Tender Notice
BOQ

17 Days Left

Rishikesh , Uttarakhand

Tender Brief : Tender For Execution Of Balance Works Of Training Centre/ Transit C At Rishikesh.

Document Fees
₹ 11800 /-

EMD
₹ 432500.0 /-

Tender Value
₹ 1.72 Crore /-

Submission Date
06-05-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift , including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.Including Supply of all material labour, T&P etc required for proper completion of the work.
2	Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). including supply of all material, labour, T&P etc. required for proper completion of the work.
3	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift Including Supply of all material labour, T&P etc required for proper completion of the work.
4	Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 liters per linear meter including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration Including Supply of all material labour, T&P etc required for proper completion of the work.
5	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) Including Supply of all material labour, T&P etc required for proper completion of the work.
6	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources): Including Supply of all material labour, T&P etc required for proper completion of the work.
7	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, huttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Including Supply of all material labour, T&P etc required for proper completion of the work.
8	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)Including Supply of all material labour, T&P etc required for proper completion of the work.
9	Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. Including Supply of all material labour, T&P etc required for proper completion of the work.
10	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) Including Supply of all material labour, T&P etc required for proper completion of the work.
11	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) Including Supply of all material labour, T&P etc required for proper completion of the work.
12	Brick work with common burnt clay F.P.S.(non modular ) bricks of class designation 7.5 in super structure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) Including Supply of all material labour, T&P etc required for proper completion of the work.
13	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium Tensile steel bars. Including Supply of all material labour, T&P etc required for proper completion of the work.
14	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. Including Supply of all material labour, T&P etc required for proper completion of the work.
15	Providing and fixing glass strips in joints of terrazzo/ cement concrete floors. 40 mm wide and 4 mm thick. Including Supply of all material labour, T&P etc required for proper completion of the work.
16	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm. Including Supply of all material labour, T&P etc required for proper completion of the work.
17	Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per Sqm, including pointing in white cement mixed with pigment of matching shade complete. Including Supply of all material labour, T&P etc required for proper completion of the work.
18	Providing and laying Vitrified/Anti skidding tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622),of approved brand & manufacturer in all colours and shade, laid with cement based high polymer midified quick set tiles ahesive (waterbased) conforming to IS:15477, in average 6 mm thickness, including grouting of joints (payment for grouting of joints to be made separately).Size of Tiles 600x600 mm. Including Supply of all material labour, T&P etc required for proper completion of the work.
19	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 Sqm Including Supply of all material labour, T&P etc required for proper completion of the work.
20	12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand). Including Supply of all material labour, T&P etc required for proper completion of the work.
21	15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand). Including Supply of all material labour, T&P etc required for proper completion of the work.
22	20 mm cement plaster 1:2 (1 cement : 2 stone dust). Including Supply of all material labour, T&P etc required for proper completion of the work.
23	Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). Including Supply of all material labour, T&P etc required for proper completion of the work.
24	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. including supply of all material labour T&P etc. required for proper completion of the work.
25	Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 0.80 mm thick with zinc coating not less than 275 gm/m² including supply of all material labour T&P etc. required for proper completion of the work.
26	Providing and fixing pressed steel door frames conforming to IS:4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile B Fixing with carbon steel galvanized dash fastener of required dia and size (to be paid for separately). Including Supply of all material labour, T&P etc required for proper completion of the work.
27	Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes Including Supply of all material labour, T&P etc required for proper completion of the work.
28	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Including Supply of all material labour, T&P etc required for proper completion of the work.
29	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Including Supply of all material labour, T&P etc required for proper completion of the work.
30	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Including Supply of all material labour, T&P etc required for proper completion of the work.
31	Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood. Including Supply of all material labour, T&P etc required for proper completion of the work.
32	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood. Including Supply of all material labour, T&P etc required for proper completion of the work.
33	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood 35 mm thick shutters Including Supply of all material labour, T&P etc required for proper completion of the work.
34	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading Including Supply of all material labour, T&P etc required for proper completion of the work.
35	Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer in- Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately,Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body Using R3 series with frame (55mm & above) x (40mm & above) & sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height upto 1.8m) including supply of all material, labour & T&P etc. required for proper completion of the work.
36	Providing & fixing in position Phenol bonded Bamboowood wall cladding at all height with planks of sizes 10mm thick, minimum 1800mm length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15mm placed at ends of each tile. The cladding shall be laid over backlayment of 1.00 mm thick expanded polyethylene foam of density 40kg/cum in two layers, first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.
37	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) including supply of all material, labour & T&P etc. required for proper completion of the work.
38	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)including supply of all material, labour & T&P etc. required for proper completion of the work.
39	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) including supply of all material, labour & T&P etc. required for proper completion of the work.
40	Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Powder coated minimum thickness 50 micron aluminium tubular handle bar. Including Supply of all material labour, T&P etc required for proper completion of the work.
41	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 )transparent or dyed to required colour or shade,with necessary screws etc. complete : 150x10 mm. Including Supply of all material labour, T&P etc required for proper completion of the work.
42	Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm. Including Supply of all material labour, T&P etc required for proper completion of the work.
43	Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 25 mm dia Including Supply of all material labour, T&P etc required for proper completion of the work.
44	Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 12 mm mild steel U beading. Including Supply of all material labour, T&P etc required for proper completion of the work.
45	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Including Supply of all material labour, T&P etc required for proper completion of the work.
46	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer. Including Supply of all material labour, T&P etc required for proper completion of the work.
47	Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats) including supply of all material, labour, T&P etc. required for proper completion of the work.
48	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. Including Supply of all material labour, T&P etc required for proper completion of the work.
49	Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface Including Supply of all material labour, T&P etc required for proper completion of the work.
50	Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same embranemanufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D -5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick. Including Supply of all material labour, T&P etc required for proper completion of the work.
51	Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondaryintermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling usinggalvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-in-Charge With 15 mm thick tegular/butt edged without perforation plain/designer light weight calcium silicate Anti Microbial Bio-Safe coated false ceiling tiles Confirming to JIS-Z2801 and ASTM G-21 Including Supply of all material labour, T&P etc required for proper completion of the work.
52	Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. Including Supply of all material labour, T&P etc required for proper completion of the work.
53	Providing and fixing brass bib cock of approved quality : 15 mm nominal bore. Including Supply of all material labour, T&P etc required for proper completion of the work.
54	Providing and fixing brass stop cock of approved quality : 15 mm nominal bore. Including Supply of all material labour, T&P etc required for proper completion of the work.
55	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore. Including Supply of all material labour, T&P etc required for proper completion of the work.
56	Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore. Including Supply of all material labour, T&P etc required for proper completion of the work.
57	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore. Including Supply of all material labour, T&P etc required for proper completion of the work.
58	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore. Including Supply of all material labour, T&P etc required for proper completion of the work.
59	Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 50 to 80 mm nominal bore. Including Supply of all material labour, T&P etc required for proper completion of the work.
60	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall 15 mm dia nominal bore. Including Supply of all material labour, T&P etc required for proper completion of the work.
61	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 20 mm dia nominal bore metre. Including Supply of all material labour, T&P etc required for proper completion of the work.
62	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25 mm dia nominal bore metre. Including Supply of all material labour, T&P etc required for proper completion of the work.
63	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter. Including Supply of all material labour, T&P etc required for proper completion of the work.
64	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter. Including Supply of all material labour, T&P etc required for proper completion of the work.
65	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular tank. Including Supply of all material labour, T&P etc required for proper completion of the work.
66	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and ashers complete. Including Supply of all material labour, T&P etc required for proper completion of the work.
67	Providing and fixing PTMT grating of approved quality and colour. Circular type 125 mm nominal dia with 25 mm waste hole. Including Supply of all material labour, T&P etc required for proper completion of the work.
68	Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore. Including Supply of all material labour, T&P etc required for proper completion of the work.
69	Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately): Flat surfaces. Including Supply of all material labour, T&P etc required for proper completion of the work.
70	Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work. Including Supply of all material labour, T&P etc required for proper completion of the work.
71	Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. Including Supply of all material labour, T&P etc required for proper completion of the work.
72	French spirit polishing : 13.68.1 Two or more coats on new works including a coat of wood filler. Including Supply of all material labour, T&P etc required for proper completion of the work.
73	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc, of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Including Supply of all material labour, T&P etc required for proper completion of the work.
74	Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in- charge. Including Supply of all material labour, T&P etc required for proper completion of the work.
75	Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade. Including Supply of all material labour, T&P etc required for proper completion of the work.
76	Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge Made of G.I. wire of dia 4 mm Including Supply of all material labour, T&P etc required for proper completion of the work.
77	Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.Including Supply of all material labour, T&P etc required for proper completion of the work.
78	Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. Including Supply of all material labour, T&P etc required for proper completion of the work.
79	Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat with approved steel primer all complete. Including Supply of all material labour, T&P etc required for proper completion of the work.
80	Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturersspecification and direction of Engineer-in-charge.Including Supply of all material labour, T&P etc required for proper completion of the work.
81	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 32 mm dia. Including Supply of all material labour, T&P etc required for proper completion of the work.
82	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 250 mm. Including Supply of all material labour, T&P etc required for proper completion of the work.
83	Filling the gap in between aluminium frame & adjacent RCC / Brick /Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 21.8.1 Upto 5mm depth and 5 mm width. Including Supply of all material labour, T&P etc required for proper completion of the work.
84	Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 40 mm dia nominal bore Including Supply of all material labour, T&P etc required for proper completion of the work.
85	Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length .15mm nominal bore Including supply of all material labour T&P etc.required for proper completion of the work.
86	Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required all door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately) Including supply of all material labour T&P etc.required for proper completion of the work.
87	Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). Including Supply of all material labour, T&P etc required for proper completion of the work.
88	Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-incharge 200mm Including Supply of all material labour, T&P etc required for proper completion of the work.
89	Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete 125x64x2.50 mm Including Supply of all material labour, T&P etc required for proper completion of the work.
90	Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 200x10 mm Including Supply of all material labour, T&P etc required for proper completion of the work.
91	Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastner with 10mm bolt. This same channel is then to be fixed in horiziontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glasswool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturer's specification as per direction of Engineer-in-Charge all complete With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles Including Supply of all material labour, T&P etc required for proper completion of the work.
92	Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed (the cost of sludge, manure and the good earth shall be paid for separately) including all material, labour and T&P etc. required for proper completion of the work and as directed by Engineer-in-charge.
93	Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. Including Supply of all material labour, T&P etc required for proper completion of the work.
94	Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106 750 mm dia Including Supply of all material labour, T&P etc required for proper completion of the work.
95	Supply & Fixing of Wall Mixer 3-in-1 Chrome FLB-CHR-5281 Jaquar Make including supply of all material, labour, T&P etc. required for proper completion of the work. including supply of all material, labour, T&P etc. required for proper completion of the work.
96	Supply & Fixing of Table Top Basin FLS-WHT-5935N with Single Leve Basin Mixer- Chrome FLB-CHR-5001BPM & With Waste Coupling – Chrome ALD-CHR-705L130 Jaquar Make including supply of all material, labour, T&P etc. required for proper completion of the work. including supply of all material, labour, T&P etc. required for proper completion of the work.
97	Supply & Fixing of Angle Stop Cock – Chrome FLP-CHK-5053PM Jaquar Make including supply of all material, labour, T&P etc. required for proper completion of the work.
98	Supply & Fixing of Bib Cock–Chrome FLP-CHR-5037PM Jaquar Make including supply of all material, labour, T&P etc. required for proper completion of the work.
99	Supply & Fixing of Round Shape Single Flow Maze Overhead Shower– hrome–OHS–CHR–1603 Jaquar Make including supply of all material, labour, T&P etc. required for proper completion of the work.
100	Supply & Fixing of Hand Shower – Chrome ALD-CHR-573 Jaquar Make including supply of all material, labour, T&P etc. required for proper completion of the work.
101	Supply & Fixing of Towel Rack – Chrome ACN-CHR-1181FHS Jaquqr Make including supply of all material, labour, T&P etc. required for proper completion of the work.
102	Supply & Fixing of Towel Holder Continental Prime Accessories CPA-CHR-1121Jaquqr Make including supply of all material, labour, T&P etc. required for proper completion of the work.
103	Supply & Fixing of Cockroch Trap Jaquar Make including supply of all material, labour, T&P etc. required for proper completion of the work.
104	Supply & Fixing of Toilet Roll Holder with flap- chrome CAN-CHR-1153S Jaquar Make including supply of all material, labour, T&P etc. required for proper completion of the work.
105	Supply, Fixing & Installation of Gyeser Meta Digital 25 Ltr. Jaquar Make. including T&P etc. required for proper completion of work. Including Supply of all material labour, T&P etc required for proper completion of the work.
106	S/F single piece WC with UF seat cover, hings fixing accessories set, cistern fitting size 655x665x760 , S-trap -300mm of model Single Picece WC SLS-WHT-6851S110P Jaquar Make. including T&P etc. required for proper completion of work. Including Supply of all material labour, T&P etc required for proper completion of the work.
107	S/F P.V.C Pipe Nahani Trap Approved Quality complete with all accessories I/C supply of all material labour T&P etc required for proper completion of the work . Including Supply of all material labour, T&P etc required for proper completion of the work.
108	Supply & Fixing of Push Button Liquid Soap Dispenser Jaquar make SDR-WHT-DJ0010FN,or equivalent approved by engineer in charge including supply of all material, labour, T&P etc. required for proper completion of the work.
109	Supply & Fixing of Soap dish Chrome AQN-CHR-7731 Jaquar Make or equivalent approved by engineer in charge including supply of all material, labour, T&P etc. required for proper completion of the work.
110	Providing and fixing of 5mm thick beveled edge mirror of superior glass (of approved quality) complete with 3 mm thick hard board ground fixed C.P. brass screws and washers complete including supply of all material, labour, T&P etc. required for proper completion of the work.
111	Supply and Fixing of 12mm thick frameless toughened glass complete with design/hatching on toughened glass including supply of all material, labour, T&P etc. required for proper completion of the work.
112	Supply and Fixing 6mm thik aluminium power coated mesh size 50x50mm with aluminium powder coated beading, including supply of all material, labour, T&P etc. required for proper completion of the work.
113	Supply, Installation, Testing & Commissioning of premium quality dual-layer Zebra Blinds (Day & Night Roller Type) with the following specifications:• Fabric: 100% polyester, UV-resistant, fire-retardant.• Operation: Manual chain mechanism / motorized (as per BOQ).• Roller Tube: Heavy-duty aluminum with powder-coated steel/aluminum end brackets.• Bottom Rail: Powder-coated/aluminum finish.• All necessary fittings, screws & accessories for complete installation.• Color/design: As approved by Engineer-in-Charge.SITC of Zebra Blinds. ncluding supply of all material, labour, T&P etc. required for proper completion of the work.
114	Providing & Fixing of termite-proof, moisture-resistant PVC/WPC fluted wall panels including framework, Corner profiles, trims, adhesives, and complete finishing as per specifications and Engineer-in-Charge direction. Including Supply of all material labour, T&P etc required for proper completion of the work.
115	Supply & Placing of Godrej Make NEH17 Rose Handle-Satin Steel Door Lock set Handle type Including Supply of all material labour, T&P etc required for proper completion of the work.
116	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed Steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B Including Supply of all material labour, T&P etc required for proper completion of the work.
117	Supply and drawing 1 x 1.5 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. Including Supply of all material labour, T&P etc required for proper completion of the work.
118	Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Including Supply of all material labour, T&P etc required for proper completion of the work.
119	Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Including Supply of all material labour, T&P etc required for proper completion of the work.
120	Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 4 sq. mm + 1 X 4 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Including Supply of all material labour, T&P etc required for proper completion of the work.
121	Supplying and fixing 6 way (4 + 18), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) Including Supply of all material labour, T&P etc required for proper completion of the work.
122	Supplying and fixing Modular Blanking Plate on the existing modular plate & Switch box excluding modular plate as required Including Supply of all material labour, T&P etc required for proper completion of the work.
123	Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way, Double door Including Supply of all material labour, T&P etc required for proper completion of the work.
124	Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double door Including Supply of all material labour, T&P etc required for proper completion of the work.
125	Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) 4 way (4 + 12), Double door Including Supply of all material labour, T&P etc required for proper completion of the work.
126	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole Including Supply of all material labour, T&P etc required for proper completion of the work.
127	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and neutral Including Supply of all material labour, T&P etc required for proper completion of the work.
128	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole Including Supply of all material labour, T&P etc required for proper completion of the work.
129	Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required 63 A Including Supply of all material labour, T&P etc required for proper completion of the work.
130	Supplying and fixing 63 Amp. rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Including Supply of all material labour, T&P etc required for proper completion of the work.
131	Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Including Supply of all material labour, T&P etc required for proper completion of the work.
132	Supplying and fixing 3 pin, 5 amp. ceilling rose on the existing junction box/wooden block including connection etc. as required. Including Supply of all material labour, T&P etc required for proper completion of the work.
133	Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. Including Supply of all material labour, T&P etc required for proper completion of the work.
134	Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. Including Supply of all material labour, T&P etc required for proper completion of the work.
135	Supplying and fixing PVC batten/ angle holder including connections etc. as required. Including Supply of all material labour, T&P etc required for proper completion of the work.
136	Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. Including Supply of all material labour, T&P etc required for proper completion of the work.
137	Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required 1 run of Cable Including Supply of all material labour, T&P etc required for proper completion of the work.
138	Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required Including Supply of all material labour, T&P etc required for proper completion of the work.
139	Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required Including Supply of all material labour, T&P etc required for proper completion of the work.
140	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, ssingle core cable in surface/ recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Including Supply of all material labour, T&P etc required for proper completion of the work
141	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Including Supply of all material labour, T&P etc required for proper completion of the work.
142	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 5/6 amps switch Including Supply of all material labour, T&P etc required for proper completion of the work.
143	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 15/16 A switch Including Supply of all material labour, T&P etc required for proper completion of the work.
144	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 3 pin 5/6 amp socket outlet Including Supply of all material labour, T&P etc required for proper completion of the work.
145	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 6 pin 15/16 A socket outlet Including Supply of all material labour, T&P etc required for proper completion of the work.
146	Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75 mmX75 mm) Including Supply of all material labour, T&P etc required for proper completion of the work.
147	Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 Module (100 mmX75 mm) Including Supply of all material labour, T&P etc required for proper completion of the work.
148	Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 6 Module (200 mmX75 mm) Including Supply of all material labour, T&P etc required for proper completion of the work.
149	Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. Including Supply of all material labour, T&P etc required for proper completion of the work.
150	Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required 125 A, 16 kA,TPMCCB Including Supply of all material labour, T&P etc required for proper completion of the work.
151	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 25mm. Including Supply of all Material Labour T&P etc required for proper completion of the work.
152	Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required Including Supply of all Material Labour T&P etc required for proper completion of the work.
153	Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required Including Supply of all Material Labour T&P etc required for proper completion of the work.
154	Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required Including Supply of all Material Labour T&P etc required for proper completion of the work.
155	Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required Including Supply of all Material Labour T&P etc required for proper completion of the work.
156	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required 3½ X 150 sq. mm (50 mm) Including Supply of all Material Labour T&P etc required for proper completion of the work.
157	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required 3½ X 35 sq. mm (32mm) Including Supply of all Material Labour T&P etc required for proper completion of the work.
158	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required 4 X 16 sq. mm (28mm)Including Supply of all Material Labour T&P etc required for proper completion of the work.
159	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required 4 X 10 sq. mm (25 mm) Including Supply of all Material Labour T&P etc required for proper completion of the work.
160	Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required including supply of all material labour T&P etc. required for proper completion of the work.
161	Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required including supply of all material labour T&P etc. required for proper completion of the work.
162	Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required including supply of all material labour T&P etc. required for proper completion of the work.
163	Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required Including Supply of all material labour, T&P etc required for proper completion of the work.
164	Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. including supply of all material labour T&P etc. required for proper completion of the work.
165	Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required 10 Zone including supply of all material labour T&P etc. required for proper completion of the work.
166	Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required including supply of all material labour T&P etc. required for proper completion of the work.
167	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 20 mm including supply of all material labour T&P etc. required for proper completion of the work.
168	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 50 mm including supply of all material labour T&P etc. required for proper completion of the work.
169	Supply, installation, testing and commissioning of Electric Driven Main Fire Pump suitable for Automatic Operation and Consisting of following, complete in all respects, as required (B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal, conforming to IS: 1520 (C) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415V, 3 Phace, 50Hz, AC supply with IP 55 protection for enclosuer, horizontal foot mounted type with class - F insulation, conforming to IS: 325. (D) MS fabrication common base plate, coupling and guard, foundation bolts etc. as required (E) Suitable cement concrete foundation duly plastered with anti vibration pads 1620 LPM, 56 Mtr. Head Note: The head of the is selected in a manner so as to give a minimum 3.5kg/cm² pressure at the highest/farthest point. including supply of all material labour T&P etc. required for proper completion of the work.
170	Supply, installation, testing and commissioning of Diesel Engine Driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) (B)Horizontal type, multistage, centerfugal pump of cast iorn body and bronze impeller with stainless steel shaft mechanical seal conforming to IS: 1520 (C) Suitable HP, 1500 RPM water cooled with radiator, Diesel Engine conforming to relevant standard complete with auto staring mechanism, 12/24 volts electric starting equipment, Diesel tank, exhaust pipe extended upto 10 Mtr. Outside pump house duly insulated with 50mm thick wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office color etc. as required.(D)MS fabrication common base plate, coupling and guard, foundation bolts etc. as required (E)Suitable cement concrete foundation duly plastered with anti vibration pads 1620 LPM, 56 Mtr. Head Note: The head of the is selected in a manner so as to give a minimum 3.5kg/cm² pressure at the higst/farthest point Including Supply of all material labour, T&P etc required for proper completion of the work
171	Supply, installation, testing and commissioning of Electric Driven Jockey Pump pressurisation pump sutitable for Automatic Operation and Consisting of following, complete in all respects , as required: (B)Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal, conforming to IS: 1520 (C)Suitable HP Squirrel cage induction motor, TEFC, suitable for operation on 415V, 3 Phace, 50Hz, AC supply with IP 55 protection for encloser, horizontal foot mounted type with class - F insulation, conforming to IS: 325 (D) MS fabrication common base plate, coupling and guard, foundation bolts etc. as required (E) Suitable cement concrete foundation duly plastered with anti vibration pads 300 LPM, 56 Mtr. Head including supply of all material labour T&P etc. required for proper completion of the work.
172	Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump. pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required. INCOMING 630A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Ammeter (0-630 A) with selector swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 800Amps. OUTGOING Note: All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps). MAIN FIRE PUMP 250 Α, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 100 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. JOCKEY PUMP 25 A, 50ΚΑ ΤPN MCCB, Ics=100% Icu, with Suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. DIESEL ENGINE CONTROL Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine. SYSTEM CONTROLLER Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification including supply of all material labour T&P etc. required for proper completion of the work.
173	Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 25mm dia including supply of all material labour T&P etc. required for proper completion of the work.
174	Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required:50mm Dia including supply of all material labour T&P etc. required for proper completion of the work
175	Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 80mm dia including supply of all material labour T&P etc. required for proper completion of the work
176	Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 100 mm dia including supply of all material labour T&P etc. required for proper completion of the work
177	Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 150 mm dia including supply of all material labour T&P etc. required for proper completion of the work
178	Supply and fixing Single heades external yard hydrant valve with 1 no 63 mm dia Instantaneous Gunmetal/SS coupling and cast iron wheel, ISI marked, conforming to IS:5290 (type-A) with blank cap and chain as required: Single heades Stainstess steel including supply of all material labour T&P etc. required for proper completion of the work
179	Supply, fixing, testing and commissioning of Buteryfly Valve of PN 1.6 rating with Bronze/G.M seat ISI markes complete with nut-bolts-washers, gaskit conforming to IS: 13095 of following size as required : 80 mm Dia including supply of all material labour T&P etc. required for proper completion of the work
180	Supply, fixing, testing and commissioning of Buteryfly Valve of PN 1.6 rating with Bronze/G.M seat ISI markes complete with nut-bolts-washers, gaskit conforming to IS: 13095 of following size as required 100 mm dia including supply of all material labour T&P etc. required for proper completion of the work.
181	Supply, fixing, testing and commissioning of Buteryfly Valve of PN 1.6 rating with Bronze/G.M seat ISI markes complete with nut-bolts-washers, gaskit conforming to IS: 13095 of following size as required 150 mm dia including supply of all material labour T&P etc. required for proper completion of the work.
182	Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required: 80mm dia including supply of all material labour T&P etc. required for proper completion of the work.
183	Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required: 100mm dia including supply of all material labour T&P etc. required for proper completion of the work.
184	Providing, Installation testing and commissioning of Non Returan Valve of following size conforming to IS: 5312 Complete with rubber gaskit, GI Nut-Bolt-Washers etc. as required:80mm dia including supply of all material labour T&P etc. required for proper completion of the work.
185	Providing, Installation testing and commissioning of Non Returan Valve of following size conforming to IS: 5312 Complete with rubber gaskit, GI Nut-Bolt-Washers etc. as required:100mm dia including supply of all material labour T&P etc. required for proper completion of the work.
186	Providing, Installation testing and commissioning of Non Returan Valve of following size conforming to IS: 5312 Complete with rubber gaskit, GI Nut-Bolt-Washers etc. as required:150mm dia including supply of all material labour T&P etc. required for proper completion of the work.
187	Supply and fixing 63 mm dia 15 mtr long RRL hose pipe with 63 mm dia male and female couplings duly with GI wire rivets etc. SS Grade 304 including supply of all material labour T&P etc. required for proper completion of the work
188	Supplying & fixing of First Aid Reel with MS construction spray painted in post office red, conforming to IS:884 complete with the following as required 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type - 2 as per IS:12585, 20 mm nominal internal dia Gun Metal Glove Valve & Nozzle. Drum and brackets for fixing the equipments on wall. Connections from riser with 25 mm dia stop gun metal valve & MS Pipe and socket Hose Reel 30mtr. including supply of all material labour T&P etc. required for proper completion of the work.
189	Supplying and fixing of 63mm dia S.S Short Branch Pipe with 20 mm nominal internal diameter size Nozzle conforming to IS: 903suitable for instantaneous connection to interconnect hose pipe coupling as required: Short Branch Pipe 63mm S.S including supply of all material labour T&P etc. required for proper completion of the work.
190	Supplying and fixing of Fire Brigade Connection of Cast Iron Body with S.S male instantaneous inlet coupling with cap and chain as required for suitable dia MS Pipe connection conforming to IS: 904 as required: 4 way - 150 mm Dia M.s Pipe including supply of all material labour T&P etc. required for proper completion of the work.
191	Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories upright Sprinkler including supply of all material labour T&P etc. required for proper completion of the work.
192	Providing & fixing of Pressure Switch in MS Pipe Line including connection etc. as required including supply of all material labour T&P etc. required for proper completion of the work
193	Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required 100mm dia including supply of all material labour T&P etc. required for proper completion of the work.
194	Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required including supply of all material labour T&P etc. required for proper completion of the work.
195	Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. including supply of all material labour T&P etc. required for proper completion of the work.
196	Supplying and fixing suitable size Gl box with modular plate and cover in Front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connection etc. as required Including Supply of all material labour, T&P etc required for proper completion of the work.
197	Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required 4 pair Including Supply of all material labour, T&P etc required for proper completion of the work.
198	Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mmcsolid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
199	Supplying and fixing Telephone socket outlet modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required Including Supply of all material labour, T&P etc required for proper completion of the work.
200	4.5 kg CO2 type portable fire extioguisher Including Supply of all material labour, T&P etc required for proper completion of the work.
201	Supply & Installation of Split AC 1.5 ton (5Star Rating) Lloyod make or equivalent as per approved by engineer -in charge , including cost of all material, labour, T&P etc. required for proper completion of the work.
202	Supply & Installation of Stabilizer for 1.5 ton AC, including cost of all material, labour, T&P etc. required for proper completion of the work.
203	Supply & Fixing of 1200mm Sweep Ceiling Fan (5Strar Rating) Orient make or equivalent as per approved by engineer -in charge including cost of all material, labour, T&P etc. required for proper completion of the work.
204	Supply & Fixing of 250mm sweep Ventilair DLX Exhaust Fan Orient make or equivalent as per approved by engineer -in charge including cost of all material, labour, T&P etc. required for proper completion of the work.
205	Supply & Fixing of 450mm sweep Ventilair DLX Exausht Fan Orient make or equivalent as per approved by engineer -in charge including cost of all material, labour, T&P etc. required for proper completion of the work.
206	Supply & Fixing of 24 Watt LED Tube Light Philips make or equivalent as per approved by engineer -in charge including cost of all material, labour, T&P etc. required for proper completion of the work.
207	Supplying & fixing False Ceiling light 24 Watt LED Tube Light Pannel Size 2'x2' (600x600) of Havells make or equivalent as per approved by engineer -in charge including cost of all material, labour, T&P etc. required for proper completion of the work.
208	Supplying & fixing of 22 Watt LED Pannel Trim round Philips make or equivalent as per approved by engineer -in charge including cost of all material, labour, T&P etc. required for proper completion of the work.
209	Supply & Fixing of 7 watt LED Bulb Philips make or equivalent as per approved by engineer -in charge including cost of all material, labour, T&P etc. required for proper completion of the work.
210	Supply & Fixing of 9 watt LED Bulb Philips make or equivalent as per approved by engineer -in charge including cost of all material, labour, T&P etc. required for proper completion of the work.
211	Supply & Fixing of 12 watt LED Bulb Philips make or equivalent as per approved by engineer -in charge including cost of all material, labour, T&P etc. required for proper completion of the work.
212	Supply & Fixing of 15 watt LED Bulb Philips make or equivalent as per approved by engineer -in charge including cost of all material, labour, T&P etc. required for proper completion of the work.
213	Supply & Fixing of 18 watt LED Bulb Philips make or equivalent as per approved by engineer -in charge including cost of all material, labour, T&P etc. required for proper completion of the work.
214	Supply & Fixing of 18 watt LED Bulb Philips make or equivalent as per approved by engineer -in charge including cost of all material, labour, T&P etc. required for proper completion of the work.
215	Supply & Fixing of 2 HP Mono Block water pump single phase 50m discharge outlet 40 to 50mm discharge 100-500 LPM of Make, Havells or equivalent as per approved by engineer -in charge including cost of all material, labour, T&P etc. required for proper completion of the work.
216	Supply and fixing of Call Bell Anchor/Cona or equivalent including cost of all material, labour, T&P etc. required for proper completion of the work.
217	LT Panel Design (as per load Approximate-100 to 150 KW or more), Supply, Installation, Testing and Commissioning (SITC) of complete LT electrical system including LT panels, all associated accessories, conforming to relevant Current IS/IEC standards, as per approved drawings and specifications, complete in all respects as directed by the Engineer-in-Charge.
218	Supply and Laying of 1.1KV LT XLPE Aluminium Armd Cables 3.5Cx150 Sqmm in buried ground/cable trench/cable tray route, complete in all respects as directed by the Engineer-in-Charge.
219	Supply and Laying of 1.1KV LT XLPE Aluminium Armd Cables 3.5Cx35 Sqmm in buried ground/cable trench/cable tray route, complete in all respects as directed by the Engineer-in-Charge
220	Supply and Laying of 1.1KV LT XLPE Aluminium Armd Cables 4Cx16 Sqmm in buried ground/cable trench/cable tray route, complete in all respects as directed by the Engineer-in-Charge
221	Supply and Laying of 1.1KV LT XLPE Aluminium Armd Cables 4Cx10Sqmm in buried ground/cable trench/cable tray route, complete in all respects as directed by the Engineer-in-Charge
222	Supply and Laying of 1.1KV LT XLPE Aluminium Armd Cables 4Cx6Sqmm in buried ground/cable trench/cable tray route, complete in all respects as directed by the Engineer-in-Charge
223	SITC 3 Phase Servo stabilizer for 150 KVA (360 -460 Input Voltage), Output Voltage +/- 1% , Oil Cooled Indoor Type. supply of all material labour T&P etc. required for proper completion of the work.
224	SITC DG & Transformer Need 450 AMP Main Incomer, 450 AMP Bypass Switch for Servo Drive. supply of all material labour T&P etc. required for proper completion of the work.
225	SITC VCB 11KV 800 A HT complete with Pt/ct Control Realy & Power Pack. supply of all material labour T&P etc. required for proper completion of the work.
226	Supply, Installation, Testing & Commissioning (SITC) of Android LED Screen/Interactive Learning Pannel 75” with 4K, 4ms, 16GB RAM, 128GB ROM, Wifi-6 Dual Channel 2.4G+5G, Multimedia file formats Support. Including Supply of all material labour, T&P etc required for proper completion of the work.
227	Supply, Installation, Testing & Commissioning (SITC) of Android LED Screen/Interactive Learning Pannel 86” with 4K, 4ms, 16GB RAM, 256GB ROM, Wifi-6 Dual Channel 2.4G+5G, Multimedia file formats Support. Including Supply of all material labour, T&P etc required for proper completion of the work. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Uttarakhand Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Execution Of Balance Works Of Training Centre/ Transit C At Rishikesh., Rishikesh-Uttarakhand

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Execution Of Balance Works Of Training Centre/ Transit C At Rishikesh., Rishikesh-Uttarakhand

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us