|
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary rock , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 2 | Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 3 | Providing and Laying concrete for plain/reinforced concrete 1:6:12 (1 Cement : 6 Sand : 12 Graded stone Aggregates 40 mm nominal size) in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 and curing complete including carriage of materials in all leads lifts as per the entire satisfaction and direction of Engineer-in-Charge. |
| 4 | Random rubble stone masonry in cement mortar 1:6 (one cement: six sand) for structure like retaining walls, breast walls wing walls, toe walls, abutment and similar works etc. in all heights complete as per drawing and technical specification clauses 702, 704, 1202 & 1204 and curing complete including carriage of materials in all leads lifts as per the entire satisfaction and direction of Engineer-in-Charge. |
| 5 | Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 6 | Providing and fixing 40mm (fouty milimeter) thick second class deodar wood panelled shutters for doors having 12mm (twelve milimeter) thick phenol bonded both side prelaminated particle board ISI marked IS No. 12823 of approved shade infill panel of Action tessa / century / Kitlam including M.S. pressed butt hinges bright finished of required size with necessary screws including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 7 | Providing and fixing 40mm (fouty milimeter) thick with 2nd class deodar wood. wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85g. With wire of dia gauge designation 85g. With wire of dia 0.56mm for doors, windows and clerestorey windows including brightclerestorey windows including bright finished black enamelled iron hinges with necessary screws. in including carriage of material, labour,tool and plants through all modes of transporation within all leads and lifts as per PWD specification and as per thedirection of the Engineer-in-charge. |
| 8 | Providing & fixing 5 mm (Five milimeter) thick glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 9 | Providing and fixing 50x12 mm (Fifty into twelve milimeter) 2nd class deodar wood wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 10 | Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint., Framed guards, bars ladders railings brackets and similar works. of buildings. and the like and as per HPPWD specifications of 1990 volume-1 including carriage of material, labour,tool and plants through all modes of transporation within all leads and as per direction of the Engineer-in-charge. |
| 11 | Providing and fixing 300x16 mm bright /matt finished Stainless Steel sliding door bolt of approved quality & make with necessary screws etc all complete.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 12 | Providing and fixing 250 x16 mm bright /matt finished Stainless Steel sliding door bolt of approved quality & make with necessary screws etc all complete.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 13 | Providing and fixing 300 x 10 mm bright /matt finished Stainless Steel tower bolt of approved quality & make with necessary screws etc all complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 14 | Providing and fixing 200 x 10 mm mm bright /matt finished Stainless Steel tower bolt of approved quality & make with necessary screws etc all complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 15 | Providing and fixing 125mm size bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 16 | Providing and fixing 100mm size bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 17 | White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals |
| 18 | Painting Two coats (excluding primming coat) on new concrete/masonry/asbestos cement/ plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with ready mixed primer as per HPPWD specification of 1990 volume-1 including carriage of material, labour,tool and plants through all modes of transporation within all leads and lifts and as per the direction of the Engineer-in-charge. |
| 19 | Painting Two coats (excluding primming coat) on over new steel & other metal surfacesafter and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with ready mixed primer as per HPPWD specification of 1990 volume-1 including carriage of material, labour,tool and plants through all modes of transporation within all leads and lifts and as per the direction of the Engineer-in-charge. |
| 20 | Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil grease ,dirt and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink including applying a priming coat of red lead paint as per HPPWD specification of 1990 volume-1 including carriage of material, labour,tool and plants through all modes of transporation within all leads and lifts and as per the direction of the Engineer-in-charge. |
| 21 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 22 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade in new work (two or more coats) over and including water thinnable priming coat with cement primer including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 23 | Providing and fixing Angle Indian Universal vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 24 | Providing and fixing 10.00 litres capacity PVC vitreous China low level flushing cistern with a pair of C.I. or mild steel brackets, complete with fitting such as lead valve less syphon, 15mm nominal size brass ball valve with polythene float, C.P. Brass handle, unions and couplings for connections with inlet, outlet and overflow pipes, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 25 | Providing and fxing vitreous china bowl pattern urinal in flat back type of size 430 mm x 260 mm x 350 mm including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp (waste) pipe to be measured and paid for seperatly including carriage of material, labour,tool and plants through all modes of transporation within all leads and as per direction of the Engineer-in-charge. |
| 26 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550x 400 mm with single including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 27 | Providing and fixing 110 x 90 mm (One hundred ten into ninty milimeter) PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 28 | Providing and fixing 150 mm dia (One hundred fifty milimeter ) PVC ‘P’ or 'S' trap for water closet (squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 29 | Providing and fixing PVC reducer including jointing with approved adhesive etc. complete 110 mm X 90 mm including carriage of material, labour,tool and plants through all modes of transporation within all leads and as per direction of the Engineer-in-charge. |
| 30 | Providing and fixing P.V.C. connection pipe with brass unions in 300/450mm length. including carriage of material, labour,tool and plants through all modes of transporation within all leads and as per direction of the Engineer-in-charge. |
| 31 | Providing and fixing CP brass waste for wash basin or sink in 32 mm dia including carriage of material, labour,tool and plants through all modes of transporation within all leads and as per direction of the Engineer-in-charge. |
| 32 | Providing and fixing 15mm nominal bore brass union including carriage of material, labour,tool and plants through all modes of transporation within all leads and as per direction of the Engineer-in-charge. |
| 33 | Providing and fixing 100mm dia angle cock including carriage of material, labour,tool and plants through all modes of transporation within all leads and as per direction of the Engineer-in-charge. |
| 34 | Providing and fixing 15mm nominal bore brass full way valve with wheel including carriage of material, labour,tool and plants through all modes of transporation within all leads and as per direction of the Engineer-in-charge. |
| 35 | Providing and fixing 600x450 mm (Six hundred into four hundred fifty milimeter) beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. . |
| 36 | Providing and fixing 15 mm dia (Twenty milimeter) brass bib tap (Superior or heavy type) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 37 | Providing and fixing C.P. brass pillar tap with capstan head In 15 mm dia (Heavy Duty) including carriage of material, labour,tool and plants through all modes of transporation within all leads and as per direction of the Engineer-in-charge. |
| 38 | Providing and fixing to wall, ceiling and floor galvanised mild steel tubes (heavy grade) tube fitting and clamps including making good the wall, ceiling and floor 15mm nominal bore heavy duty including carriage of material, labour,tool and plants through all modes of transporation within all leads and as per direction of the Engineer-in-charge. |
| 39 | Providing and fixing high pressure PVC spigot and socket, waste and vantilating pipes ISI marked including fixing with approved adhesive etc complete including carriage of material, labour,tool and plants through all modes of transporation within all leads and as per direction of the Engineer-in-charge. 110mm (One hundred ten milimeter) nominal bore/diameters |
| 40 | 75mm (Seventy five milimeter) nominal bore/diameters |
| 41 | Providing and fixing PVC collars ISI marked inclding fixing with approved adhesive etc complete in including carriage of material, labour,tool and plants through all modes of transporation within all leads and as per direction of the Engineer-in-charge. 110mm (One hundred ten milimeter) nominal bore/diameters |
| 42 | 75mm (Seventy five milimeter) nominal bore/diameters |
| 43 | Providing and fixing PVC plain bend including fixing with approved adhesive etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 110mm (One hundred ten milimeter) nominal bore/diameters |
| 44 | 75mm (Seventy five milimeter) nominal bore/diameters |
| 45 | Supplying and fixing cast iron cover with rectangle frame 445 x 610 mm (Four hundred fouty five into six hundred ten milimeter) (light duty) single seal pattern having weight not less than 23 kg. as per HPPWD specifications including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 46 | Providing and fixing 100 mm (One hundred milimeter) sand cast Iron grating for gully trap. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 47 | Providing and fixing 90 mm dia PVC offset 45° ISI marked including fixing with approved adhesive etc. complete. complete including fixing with approved adhesive etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 48 | Providing and fixing 75 mm dia PVC offset 45° ISI marked including fixing with approved adhesive etc. complete. complete including fixing with approved adhesive etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
