|
| 1 | Item Rate BOQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: The Superintending Engineer / Chennai Circle Name of Work: Construction of Additional Rooms and Refurbishment for Indian Forest Service Mess at Velachery in Chennai city. Contract No: SE/CC/DB/ 903 /2026 Bidder Name : BOOKLET - 4TENDER CODING SHEET ( BOQ) CONTAINS : 28 Pages( RATES TO BE FILLED UP BY THE TENDERER IN THIS CODING SHEET )SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of work Item Code / Make Qty Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against 1 No Item Quoted Currency in INR / Other Currency Rate exclusive of GST in Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category Rate exclusive of GST in words AMOUNT Rs. P. AMOUNT Rs. P. TOTAL AMOUNT In Words |
| 2 | Earth work excavation in all soils (including refilling)a) 0 to 2 mt. |
| 3 | b. 2 to 3 mt. |
| 4 | Supplying and filling in foundation and basement with crushed stone sand in layers of 150 mm thickness |
| 5 | Supply and filling in foundation and basement with Stonedust in layers of 150mm thickness |
| 6 | Plain cement concrete 1:5:10 for Foundation & Basement |
| 7 | Providing and laying in position, Standardised Concrete Mix M-30 Gradea. In Foundation and basement |
| 8 | b. In Ground Floor |
| 9 | c. In First Floor |
| 10 | d. In Second Floor |
| 11 | e. In Third floor |
| 12 | Providing and constructing Autoclaved Aerated Concrete block masonry work using standard size of AAC blocks. i). For 600mm x 200mmx225mm thick AAC block wall b. In First Floor |
| 13 | c. In Second Floor |
| 14 | Providing and constructing Autoclaved Aerated Concrete block masonry work using standard size of AAC blocks. i). For 600mm x 100mmx200mm thick AAC block wall c. In First Floor |
| 15 | d. In Second Floor |
| 16 | Brick work in Cement Mortar 1:6 using Chamber burnt bricks of size 9”x4½\\"X3” (23x11.4x7.5cm) for super structure in the following floorsb. In Ground Floor/Stilt floor |
| 17 | In first floor |
| 18 | In Second floor |
| 19 | Brick partition wall in Cement Mortar 1:4 114mm thick for super structure in the following floors using chamber burnt bricks of size 9”x4¼”x3” (23x11.4x7.5cm)In Second floor |
| 20 | Weathering Course with concrete broken brick jelly 20mm gauge in pure burnt lime stone slaked and screened (No Sand) |
| 21 | Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 |
| 22 | Supplying and fixing of Colour glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm thick |
| 23 | Supplying and fixing of colour Ceramic Tiles Anti skid using Grout (Tile Joint Filler). |
| 24 | Providing double nosing to the edges of Granite slab |
| 25 | Supplying and fixing of Synthetic Grey, paradise/ Similar varieties of Granite slabs (Super fine polished with Machine cut edges) of size 2’0” x 1’0” or 1’0” x 1’0” or 1’0” x 0’6” of 10 mm thick for wall cladding |
| 26 | Supplying and fixing of Stain free Nano polish Vitrified Tiles of size (600x600x8mm) for flooring C.M 1:3, 20mm thick |
| 27 | Supplying and fixing of Synthetic Grey, paradise/ Similar varieties of Granite slabs (Super fine polished with Machine cut edges) for Staircase steps in C.M 1:3 20mm thick including pointing |
| 28 | Formwork using M.S.Sheeta) For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc., |
| 29 | b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts,sill slab,staircase,portico slab and other similar works |
| 30 | c.For Square and rectangular columns and small quantities |
| 31 | d.Vertical wall |
| 32 | Plastering in C.M. 1:5, 12 mm thick |
| 33 | Special ceiling plastering in cement mortar 1:3, 10 mm thick |
| 34 | Plastering with CM 1:3, with 12 mm thick mixed with water proofing compound (CICO) at the rate of 2 kg / 10 sq.m |
| 35 | Painting - New \\"iron work\\" |
| 36 | Supplying and applying of Full putty one coat with aproved make wall putty for smooth finishing the new cement plastered walls |
| 37 | Providing two coats of Plastic Emulsion paint including primer for inner walls |
| 38 | Providing two coats of Exterior Emulsion paint including primer for outer walls |
| 39 | Providing the new wood work with two coats of best melamine polish/varnish of approved quality and brand |
| 40 | Teak wood Wrought & Put upa) T.W. over 2 m & below 3 m |
| 41 | b. T.W. below 2 m length. |
| 42 | Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes |
| 43 | Supply and fixing of Teak wood glazed window shutters using Teakwood scantlings for styles and rails and 4mm thick frosted glass for panels a. Window: 135 cm height |
| 44 | Supply and fixing of Teak wood glazed Ventilator shutters using Teakwood scantlings for styles and rails and 4mm thick frosted glass for panelsa. Ventilator: (90 x 60 cm) |
| 45 | Supplying and fixing of Best Indian Teakwood Panelled door shutters Single leaf in position using 75mm x 37.5mm stylesb. 900X2100mm with Aluminium fittings ( Single leaf) |
| 46 | Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate |
| 47 | Applying one coat of Anticorrosive treatment for steel window/ M.S. Grills (using 5 liters of anticorosive chemical per one MT of steel) at site |
| 48 | Supplying & fixing of Stainless steel Hand Rails for Staircase |
| 49 | Supplying, Fabrication and placing of Mild steel grills Fe550D (Corrosion resistant reinforcement) of all diameters for reinforcements for all floors |
| 50 | Supplying and fixing of half turn C.P Long body Tap of 15mm dia of best quality |
| 51 | Supplying and fixing of half turn C.P short body Tap of 15mm dia of best quality |
| 52 | Supply and erection of Rotational Moulded Polyethylene water storage tanks (HDPE Cylinderical vertical type) for outdoor use having capacity of following litres (excluding free board) of approved brand (superior variety) with ISI Marka. 2000 litres |
| 53 | Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40a. 32 mm dia |
| 54 | b. 25 mm dia |
| 55 | c) 50mm dia |
| 56 | Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness not less than the specified in IS 4985 (fully consealed in walls)c. 20mm dia PVC water supply ASTM pipe |
| 57 | Supplying and fixing of porcelin Wash hand basin (white without pedastal), superior variety of size 550x400mm with all accessories |
| 58 | Supplying and fixing EWC superior variety (white) 500mm with PVC SWR grade 'P' or 'S' trap |
| 59 | Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for soil line with relevant specials confirming to IS 14735a) 110 mm dia. |
| 60 | b. 75 mm dia. |
| 61 | Supplying, laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type 'B' for waste water line |
| 62 | Supplying and laying of HDPE Geomembrane 1500 micron thickness of smooth surfaces on both sides / only one facetextured. |
| 63 | Supply and fixing Porcelain Soap Dish of size 150mm x 150mm x 50mm white |
| 64 | Supplying and fixing of best approved quality of following CP water supply/Sanitary fittings confirming to I.S. specificationa) CP two Way bib cock with health faucet |
| 65 | b) CP Wall Mixture Tap 3 in 1 system with Hand Showers |
| 66 | c) CP Shower Arm with Overhead Shower Rose |
| 67 | Supplying and fixing of aluminium towel rails of 75cm long |
| 68 | Supplying and fixing of aluminium plate with five pins for coat stand |
| 69 | Supply and Fixing of Bevelled edge mirror of approved quality and brand of size 600x450x5.5mm |
| 70 | Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark with suitable size PVC box (Fire retardant box) for coastal a. Light point with ceiling rose |
| 71 | b. Light point without ceiling rose |
| 72 | c. Calling bell point with Buzzer/ Calling bell |
| 73 | Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.(PVC Electrical Box ) |
| 74 | Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.(PVC Electrical Box ) |
| 75 | Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself. |
| 76 | Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.(PVC Electrical Box ) |
| 77 | Supplying and fixing of 15 Amps 3 pin flush type plug using ( PVC Box , Fire Retarded Box) |
| 78 | Providing Earthing station using pipe electrode as per IS 3043 using 2.5m of 40mm and 1.0 m of 20mm B-class GI pipe |
| 79 | Charges for assembling and fixing of ceiling fan |
| 80 | Supply and delivery of following Electric Ceiling fan with ISI marka) 48\\" Electric fan 1200mm sweep |
| 81 | Supplying and fixing of following dia sweep AC exhaust fan of approved ISI Qualitya) 300 mm dia |
| 82 | Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder of best approved varietya) 9 watts LED bulb |
| 83 | b) 12 watts LED bulb |
| 84 | Supplying and fixing of water tight Bulk head fitting suitable for 12 watts LED |
| 85 | Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable |
| 86 | Run off main with 2 wires of 2.5 sq.mm. PVC insulated single core multistrand fire retardant flexible copper cable with ISI mark |
| 87 | Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable |
| 88 | Run of 4 Wires of 6 sqmm PVC insulated single core multi strand fire retardant flexible copper cable |
| 89 | Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) |
| 90 | Supply and laying of 8 SWG wire |
| 91 | Supply and fixing of 24W LED 4000K 2 x 2 Square Type Recessed light Fitting |
| 92 | ABS DOOR / EQUIVALENT - Specification: Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), Plain Pre-laminated Door |
| 93 | FOAMED PVC DOOR FRAME - Specification: Providing factory made pre-laminated FPVC (Formed Polyvinyl Chloride) Door Frame of the size 105 x 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 6 Nos. of 5mm long screw. |
| 94 | FALSE CEILING WITH GYPSUM BOARD:Providing and fixing suspended false ceiling of Saint Gobain or equviallent make Gypsum board which includes providing and fixing Gl perimeter channel of size 0.50mm thick |
| 95 | Design, Supply, Delivery, Installation,Testing and Commissioning of 13 Passenger Lift machine room less, Speed 1.5 m/s with Stainless Steel Panels, Disable friendly, microprocessor based controller, VVVF drive, Fire rated doors and ARD |
| 96 | Wiring for lift well light point and socket outlet with 2 x 1.5 sqmm FRLS PVC insulated stranded copper |
| 97 | Supplying and clamping of PVC armoured LTUG cable on post or wall and ceiling with necessary MS Clamps, Brass screws, T.W. Plugs (Above GL) a) 3.5 core 25 sq.mm. PVC LTUG armoured cable |
| 98 | Supplying and fixing of brass cable gland suitable for following core and sqmm PVC armoured LTUG cable with earth strip around the gland and cable termination with crimping of terminal with lugsa) 3.5 c x 25 sqmm PVC armoured LTUG cable |
| 99 | Supply and providing cable end termination of following core and sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connectiona) 3.5 core x 25sq.mm. PVC LTUG aluminium armoured cable |
| 100 | Supply and fixing of following MCB Isolator including cost of all materials, labour charges and erection charges etc.a) Four Pole 63A (Lower End) |
| 101 | Providing two legged scaffolding using 15cm diameter casurina props or best quality bamboo posts of 4m overall length (3m height + 0.50m projection + 0.50m into the ground )15.5m height in addition of 2.5m height |
| 102 | Cleaning the surface and attending the Cracks using Fill a gap, apply two coats of ELASTACOAT (white colour) using BOSTIK brand or equivalent over one coat of primer using BOSTIK brand or equivalent |
| 103 | Special Plastering work, Removing the existing damaged area, Applying rust removal coat for removing rust using iron brush, Applying Zinc rich primer for Antirust coat, Applying Nitobond EP bonding agent for existing to new plastering work, Applying micro concrete with 1:1 ratio adding admixture of SBR, plastering with 1:3 ratio |
| 104 | Drilling holes of 18 to 20mm diameter to a depth of 200mm, clear the dust in holes, and applying Hilti RE 500 V 4 chemical etc. |
| 105 | Drilling holes of 22 to 25mm diameter to a depth of 200mm, clear the dust in holes, and applying Hilti RE 500 V 4 chemical etc., |
| 106 | Dismantling the damaged pressed tiles and weathering course in cement mortar without affecting the adjacent structures in all floor |
| 107 | Dismantling the existing damaged RCC with out affecting the adjacent structures |
| 108 | Dismantling the damaged brick works in cement mortar in all floors without affecting the adjacent structures |
| 109 | Supply and fixing of triple pole and neutral 4 way 7 segment 3 tier compartmental type MCB distribution board complete with necessary incomings and outgoings etc. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
