|
| 1 | Taking down door / window frame with shutter (without taking of shutter from the frame) area not exc 1.5 sqm complete all as specified and directed. |
| 2 | Taking down door / window frame with shutter (without taking of shutter from the frame) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed. |
| 3 | Taking down shutters only of any description area not exc 1.00 sqm each complete all as specified and directed. |
| 4 | Taking down shutters only of any description area exc 1.00 sqm but not exc 2.00 sqm complete all as specified and directed. |
| 5 | S&F Providing and fixing factory made uPVC white Sliding window three track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he metered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminium track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) (A) area not exceeding 2.00 sqm each complete all as specified and directed. |
| 6 | all as as per item no. 5 above but area exceeding 2.00 Sqm each all as specified and directed. |
| 7 | S & F for Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.)comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made all as specified and directed. |
| 8 | S&F 2nd class hardwood plain,solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified and directed. |
| 9 | S& F factory made 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels, both face is covered with decorative face veneer with lipping/frame to match complete all as specified & directed |
| 10 | S & F 30mm thick second class hardwood glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), square with frame plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters a specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as all as specified and directed |
| 11 | S & F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless-steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement all as specified and directed. |
| 12 | S& F power coated anodised aluminium frame for doors, windows, ventilators/ partitions with one rebates including joint cleat for fixing etc complete all as specified . |
| 13 | S& F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, complete all as specified and directed |
| 14 | S& F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, complete all as specified and directed |
| 15 | S& F powder sliding window with three track shutters including (two glass and one wire mesh) powder coated anodised aluminium frame work aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, complete all as specified and directed |
| 16 | S & F powder coated aluminium door shutters, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, hanles, hinges anodised aluminium snap beading screws etc complete all as specified and directed. |
| 17 | S&F Solid PVC Door Frame of size 50mm x 47mmmade out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening all as specified and directed |
| 18 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing all as specified and directed. |
| 19 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and all as specified and directed |
| 20 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel Knob type locking system from inside, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. The panel insertion for door shutter shall be 8 to 10mm thick uPVC sheet as directed. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed . Note:- Rate inclusive of glass pane of 6mm thick/ uPVC panels with suitable thickness. |
| 21 | M&L for 18/19mm thick prelaminated marine plywood, High quality BWP Marine grade, prelaminated on both side with decorative choice lamination , fixed with stainless steel screws to frame work as in cupboard shutter, study table etc complete all as specified and directed |
| 22 | M & L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 23 | S & F 100 mm long Mild steel medium weight cold rolled butt hinges and fixed with screw/welded to frames etc all as specified and as directed by EIC |
| 24 | S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, , 75 mm long complete all as specified and directed |
| 25 | S & F 100 mm long extruded aluminium alloy handles, fabricated type, anodised, ISI marked complete all as specified and directed. |
| 26 | S & F 150 mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed |
| 27 | S & F 100 mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed |
| 28 | S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed. |
| 29 | Hacking out old broken glass (any thickness size and quality and description) from wooden/steel frames glazed with putty or fixed with beads etc complete all as specified and directed |
| 30 | S&F 3 mm thick sheet glass ordinary quality n.exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and directed. |
| 31 | All as per Item No.30 above but figured glass complete all as specified and directed. |
| 32 | S & F 4mm thick sheet glass ordinary quality fixing with putty or wood/ steel staples in square not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 33 | S & Fixed in repair door closer Hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kgs of aluminium extruded section complete all as specified and directed. |
| 34 | S & F in repair Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring of 150mm long complete all as specified and directed. |
| 35 | M&L for 9mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work in repair complete all as specified and directed. |
| 36 | M & L fixed in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 37 | S & F stainless steel of 0.36 mm nominal dia of wire and average width of aperature 1.4 mm, fixed with aluminium wire staples complete all as specified and directed. |
| 38 | S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm as in wooden shutter or aluminium shutters fixed all all as specified and directed |
| 39 | S & F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples in wooden shutter or aluminium shutters all as specified and directed |
| 40 | Taking down aluminium door/window shutters any size and refixing the same after repair /changing necessary hinges and builders hardware to same position all as per direction of Engg in charge note: the rate inclusive of builders hardware required for easy functioning of aluminium shutter complete all as specified and directed |
| 41 | S & F brass Mortise lock 4 leavers vertical type size 100mm fixed in repairs all as specified and directed. |
| 42 | S & F in repairs 100mm long butt hinges extruded aluminium alloy with galvanised Mild steel hinge pin anodised and fixed type B21 complete all as specified and directed |
| 43 | S & F in repair Mild steel medium weight butt hinges 100mm size in existing/ near portion for easy functioning of shutters including making good the disturbed surface complete all as specified and directed |
| 44 | S & F in repair Mild steel medium weight butt hinges 75mm size in existing/ near portion for easy functioning of shutters including making good the disturbed surface complete all as specified and directed |
| 45 | S & F in repair aluminium anodised handle of size 150mm complete all as specified and directed |
| 46 | S & F in repairs aluminium anodised barrel tower bolt of extruded section 100mm long complete all as specified and directed |
| 47 | S&F as in repair mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed |
| 48 | Dismantling single layer Mangalore pattern or similar tiles in roofs complete all as specified and directed |
| 49 | M/L Mangalore pattern roof tiles interlocking at side joints laid dry complete all as specified and directed |
| 50 | M/L Mangalore pattern ridge tiles bedded and jointed in cement mortar 1:6 complete all as specified and directed |
| 51 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 52 | S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 53 | S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 54 | S&F 2mm thick Fibre glass reinforced translucent/Plain corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 55 | S&F steel work in tubular trusses, rafters, purlins, ladders and other structural work including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 complete all as specified and directed. |
| 56 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement etc, complete all as specified and directed. |
| 57 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 58 | M&L for 10mm thick Toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 59 | M&L preparation of new steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc crome complete all as specified and directed. |
| 60 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/blankets, any thickness, including any type frame work and cover fillets etc, complete all as specified and directed |
| 61 | M&l for 5mm thick WPC wall panelling colour WPC sheet inclusive of solvent cement & necessary frame work as per specifications and all as specified and directed |
| 62 | M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over GI frame work seamless perimeter 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and including hangers 6mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3 mm mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long and including two coats of OBD over 3mm thick acrylic putty, complete all as specified. Note : Rate inclusive all type of design i.e. offsets and projection. The area measured only length and width of room and building. Design of ceiling approved all as specified and directed |
| 63 | S & F Anodised aluminium snap grid frame work for false ceiling all as specified of grid size 605 X 605mm.complete all as specified and directed. |
| 64 | M & L for 4-6 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) all as specified and as directed. |
| 65 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. Note : The tiled floor has to be demolished/ dismantled entirely up to the sub base level/ RCC floor level including backing coat irrespective of number of layers of tiles and taking down wall plaster also including in wall tiles all as specified and directed. |
| 66 | M & L for verified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed |
| 67 | M&L for Verified Ceramic tiles light shade 8-10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm and not exc 1.00 sqm in floors, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 68 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 69 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 70 | M&L for Endure tiles/ stone (coloured/ designer) heavy duty of size 300X300mm/400x400mm, 10-12 mm thick, as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 71 | M&L for laterite tile size 300x150x19 mm thick as in wall, set and jointed with adhesive/ chemical and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, complete all as specified and directed. Note: Tile shade and design approved by Engr -in-Charge/GE all as specified and directed. |
| 72 | M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed. |
| 73 | M&L PCC 1:2:4 type B0 (12.5mm graded aggregate) 25mm thick as in floor subbase for receiving of floor tiles complete all as specified and directed. |
| 74 | M&L for Glazed ceramic coloured tiles/Wall cladding tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick or any size as directed by Engr in Charge set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed |
| 75 | M&L for rendering 10mm thick on fair faces of brick work in CM 1:4 as backing coat to receive tiles complete all as specified and directed. |
| 76 | Demolition of cement concrete in ground floors and paving's n exc 15 cm thickness (below or above ground level) all as specified and directed |
| 77 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 78 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 79 | Demolition of brickwork or stone/ boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 80 | M&L for Brickwork with sub- class ‘B’ old size bricks straight or curved on plan exc 6 m mean radius in CM 1:6, complete all as specified and directed. |
| 81 | M&L for Brickwork with subclass ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, built in M 1:4, complete all as specified and directed. |
| 82 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed. |
| 83 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 including finished the surface even and smooth with out using extra cement complete all as specified and directed. |
| 84 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 85 | M&L 5 mm thick rendering in cement mortar 1:3 on fair faces of brick work or concrete surfaces, rendering finished even and smooth as in ceiling complete all as specified and as directed. |
| 86 | M&L for preparation of new treated ceiling surface and applying three coats of white wash complete all as specified and directed. |
| 87 | M&L for preparation of new plastered surface of wall and applying two coats of weather coat paint over a coat of primer complete all as specified and directed. |
| 88 | M&L for preparation of new treated wall surface and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 89 | S & F in repair 20mm bore, 3- layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings incl taking down the pipe complete all as specified and directed |
| 90 | S & F in repair 25 mm bore, 3- layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings incl taking down the pipe complete all as specified and directed |
| 91 | Cleaning of water tank capacity 500 ltrs and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete all as specified and directed.Note :- Rate inclusive of dewatering of tank, removal of sludge, high pressure cleaning , vacuum cleaning & apply anti bacterial agents/ Ultra voilet redactions. |
| 92 | Cleaning of water tank capacity 1000 ltrs and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete all as specified and directed.Note :- Rate inclusive of dewatering of tank, removal of sludge, high pressure cleaning , vacuum cleaning & apply anti bacterial agents/ Ultra violet redactions. |
| 93 | S & F in repair 25 mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed .(Minimum weight 15mm-142 gms/20mm -210 gms/25mm -455 gms/40 mm-690 gms) all as specified and directed |
| 94 | S & F in repair chromioum plated fancy type 15 mm dia Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe/ ppr pipes or brass ferrule complete all as specified and directed |
| 95 | S & F in repairs fancy type Pillar taps 15mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron /PPR pipes and fixed complete all as specified and directed |
| 96 | S & F in repair fancy type 15 mm dia concealed type Stop valves, chromium plated with long shank and cup screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed |
| 97 | S & F in repairs 15mm stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union. complete all as specified and directed |
| 98 | S&F in repair fancy type 15 mm dia angle cock, cast copper alloy screwed for iron pipe & fixed complete all as specified and directed |
| 99 | S & F in repairs brass CP mixture for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed |
| 100 | S & F in repairs 125 mm size chromium plated brass shower rose with or without swivel joints and swivel arms for fixing with 15 mm dia bore pipe complete all as specified and directed. |
| 101 | S&F in repairs stainless steel sink grade 304 with drainage board made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe cast iron cantilever brackets connecting union over all size 915mmx460mm with bowl size 410mmx330mmx160mm complete all as specified and directed |
| 102 | S&F in repairs EWC seat cover of any pattern including cover and Mild steel chromium plated hinging devices of any colour all as specified and directed. |
| 103 | S&F in repairs health faucet, CP with flexible pipe of bore 15mm with necessary holder , screws and fasteners fitted to wall complete all as specified and directed. |
| 104 | Supply & fixed (in repair) vitreous china wash down water closet pedestal pattern (EWC) , White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges and Health Faucet with pipe complete all as specified and directed |
| 105 | S&F in repairs vitreous china squatting pan Orissa pattern size 580x440mm white integral foot rest, including concrete bedding with trap 100mm complete all as specified and directed |
| 106 | S&F Cascade type water closet with flushing cistern including seat cover and all necessity connections etc complete all as specified and all as specified and directed |
| 107 | S&F in repairs Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe), including urinal spreader of PTMT any colour for fixing with 15 mm dia pipe and outgoing pipes complete all as specified and directed. |
| 108 | S & F for 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old tank of any capacity complete all as specified and directed |
| 109 | S & F for 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old tank of any capacity complete all as specified and directed |
| 110 | S&F in repairs PVC overhead tank cover for tanks of capacity 500ltr to 1000 ltr including locking bolts and securing the hinges in proper position complete all as specified and directed. |
| 111 | S&F looking mirror 600 x 450 mm bevelled edge, of selected quality glass fancy type complete all as specified and directed |
| 112 | S&F in repairs 20mm dia tabular towel rail brass CP `D`type , 60 cm long between flanges including one pair of brackets all as specified and directed |
| 113 | S&F in repair 32 mm dia PVC waste pipe 90 cm long flexible type for Wash basin complete all as specified and directed |
| 114 | S & F in repairs 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including short lengths, with all pipe fittings such as ends, elbows, unions, hose clips etc. and fixing to walls etc, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and cutting through walls, floors and their making good and also cutting, screwing and waste all as specified and directed |
| 115 | S & F in repairs 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including short lengths, with all pipe fittings such as ends, elbows, unions, hose clips etc. and fixing to walls etc, in walls, floors and their making good and also cutting, screwing and waste all as specified and directed |
| 116 | M&L 32mm dia bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. With long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed as in repairs all as specified and directed |
| 117 | S&F 15mm bore PVC connection pipe, 450mm long fixed as in repairs all as specified and directed |
| 118 | S&F in repair 75 PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed. |
| 119 | S&F in repairs glass corner shelf made out of 5 mm thick glass guarded with CP brass guards complete all as specified and directed. |
| 120 | S&F in repairs straight glass shelf made out of 5 mm thick glass graded with CP brass guards complete all as specified and all as specified and directed |
| 121 | S & F in repairs, vitreous china WHB white, flat back, size 550x400mm with brackets, inc. cutting for & pinning in ends of brackets, inc. waste fitting, PTMT 32mm dia and pillar taps of PTMT 15mm dia complete all as specified and directed. |
| 122 | Supply & fixed in repair 10 litre capacity Flush polypropylene cistern, ISI marked, white at low level complete with PVC bend/flush pipe and making all connection including taking down existing high/low level cistern with all connections and making good the disturbed surfaces in cement mortar (1:3) to match with the existing surface, complete all as specified and directed |
| 123 | S&F in repairs bathroom cabinet with mirror 250x400 mm size, including removal of existing cabinet complete all as specified and directed. |
| 124 | S&F in repairs stainless steel soap tray fixed with brass screws complete all as specified and directed. |
| 125 | S&F in repairs toilet paper holder, brass, CP brass fitted to wall complete all as specified and directed |
| 126 | S&F in repairs 25mm dia stainless steel curtain rod with brackets approved pattern / colour / design of including decorative end caps/dome, etc. complete all as specified and directed. |
| 127 | S&F in repairs venetian blind using cotton/Nylon fabric of size as required for windows/ Ventilators horizontally rolling up and down with double layer cloth including rolling device on top and power coated aluminium double layer pipe at bottom, incl operating rope etc all as specified and directed. |
| 128 | M & L for preparation of old treated surfaces of wall any description and applying one coat of white wash complete all as specified and directed. |
| 129 | M & L for preparation of old treated surfaces of ceiling and applying one coat of white wash complete all as specified and directed |
| 130 | M & L for preparation of old treated surfaces of walls and applying one coat of Acrylic emulsion distemper complete all as specified and directed. |
| 131 | M & L for complete removal of existing treatment of walls and applying two coat of Acrylic emulsion distemper over one coat of primer all as specified and directed. |
| 132 | M&L for preparing old treated wooden surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint including preparation of surface all as specified and directed. |
| 133 | M & L for preparing old steel surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint including preparation of surface all as specified and directed. |
| 134 | M & L for preparation of old wall surfaces and applying one coat of weather proof coat paint complete all as specified and directedNote : Rate inclusive of necessary stagging / scaffolding if required at site. |
| 135 | M & L for preparation of old wall surfaces and applying Two coat of weather proof coat paint complete all as specified and directedNote : Rate inclusive of necessary stagging / scaffolding if required at site. |
| 136 | Writing letters or figures(Block, Roman, Italic or Indian) not exc 30Cm high with thick paint so that they stand out boldly and solidly without showing brush marks all as specified and directed |
| 137 | M & L for prepation of old steel Surfaces of any description, n.exc 10cm in width or girth & applying one coat of synthetic enamel paint complete all as specified and directed. |
| 138 | M & L for preparation and cleaning of old surface of mangalore pattern tiles and applying two coat of acrylic weather coat paint including necessary scaffolding as per site requirement and all as specified and directed |
| 139 | M&L for applying required coat of 3 mm wall care putty on wall, surface as even and smooth finish complete all as specified and directed. |
| 140 | Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by remove / scraping down all smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using steel patti/wire brush/broom/ one coat of weather coat terracotta paint over wall or floor/ MP tiles surfaces including the preparation of the surfaces, complete all as specified and directed. |
| 141 | Taking down cement plaster including existing roof treatment or fillets on roof surfaces and wall surfaces complete, racking out joints, hacking for key scrubbing down with water etc and removing rubbish to a distance exc 250m and not exc 500m all as specified and directed |
| 142 | M&L PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in padding concrete for roof ,Plinth course,copings,string courses,water troughs and the like finished even and smooth including necessary formwork,weathering,slightly rounded or chamfered angles and throating complete all as specified and directed |
| 143 | M&L for 15 mm thick rendering in cement mortar 1:3 on fair surfaces of brick masonry or concrete surface, finished the surface even and smooth with using extra cement incl using WPC as per manufacturers instructions, complete all as specified and directed. Note : WPC shall be measured and paid separately. |
| 144 | Supply only liquid waterproofing compound (ISI grade only) all as specified and directed |
| 145 | M&L for applying two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating on existing roof screed/plaster surface including equipment's and supervision charges in following step by (i) Roof substrate must be pressure-washed with water with, a minimum working pressure of 1,400 psi is to be used to remove all dirt, dust, chalking and waste products, complying with standard specification and as directed(ii) Inspect for cracks over roof screed, roof wall junction, water drain inlets/outlets if any, and clean and moisten them. Crack’s width should be wide up to 5-6 mm with mechanical cutting machine and Apply bond coat of SBR Latex in the ratio of 1:1 (URP 1: Cement 1) followed by groove should be filled with PMM by preparing Polymer modified mortar of CM 1:1 (Silica sand size ≤ 300microns) admixed with SBR Latex at a dosage of 15% of cement.(iii) Providing 300mm x 300 mm Square / rectangle upstand of M20 grade concrete or with PMM around mechanical equipment like HVAC, air-conditioning, solar panels. Etc. Apply a coat of two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating allow to cure for 3-4 hours and followed by apply two coats two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating reinforced with 45 Gsm glass fiber mesh or geo textile without dilution in the interval of 4 -6 hrs. Apply Hybrid PU Sealant at around the junction of fabricated stand inserted and wall mounting mechanical fixtures. |
| 146 | (iv) Providing Minimum 50mm thick angle fillet with CM of 1:3 admixed with SBR Latex at a dosage of 12-15% of Cement and a bond coat of SBR Latex mixed with Cement at a ratio of 1:1.(v) Premix hybrid Polyurethane waterproof coating components A and B with an electric double paddle mixer stirrer for 2-3 minutes at a slow speed. The concrete surface must be brought into surface saturated dry condition (SSD). Providing and apply first coat of two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating to the existing screed/plaster at a rate of 0.5Kg/sq.mt/coat. Place a 45-GSM glass fiber mesh or 200- 225 GSM raw mesh between the first and second coats while the first coat is still wet. Allow the first coat to dry for 3-4 hours. Apply the second and third coats of two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating with the same application coverage, but in a direction perpendicular to that of the first and second coats. |
| 147 | item No 145 Ctd........ Allow each coat to air cure for a minimum of 3-4 hours after application. Ensure that no void surface is left untreated or uncoated. All coats should be applied in directions perpendicular to each other, ensuring the correct consumption of material, resulting in a total dry film thickness of 1000 microns with system coverage in three undiluted coats at a rate of 1.50 Kg/ sq.mt/coat. Allow the system to air cure for 5-7 days minimum. The material should conform to the specified technical properties:a) Tensile Strength with Fiber ≥9N/mm2 as per ASTM D 2370b) Elongation at break ≥ 200% as per ASTM D 2370c) Crack bridging ability ≥ 3mm as per EN 1062-7-2004(A) d) solid content ≥55% as per ASTM D 1,644-2001e) Abrasion resistance 15mg confirming to ASTM D 4060f) Shore-A 65 as per ASTM D2240 g) Tear Resistance with Fiber 40N/mm as per ASTM D 624.The waterproofing coating shall be applied over the entire horizontal surface and extended onto the vertical surface of the parapet wall, as per the manufacturer methodology as directed by GE/Engineer-in-Charge.Note: All waterproofing work suggested above shall be carried out by the working party of the manufactuer or skilled waterproofing contractor under the guidance of a technical expert from the manufacturer. The technical expert should audit the quality of the waterproofing work and submit the report. The contractor should submit the skilled project waterproofer certificate issued from the manufacturer while receiving the work order. Please Enable Macros to View BoQ information |
