|
| 1 | Earth work in excavation of foundation in all kinds of soil including dressing and levelling the foundation bed and depositing the excavated materials clear of work site with all leads, lifts, delifts and dewatering & shoring including removing bushes, stumps and any other foreign materials from the working area as well as from the foundation trenches with cost of all labour, T&P, hire and running charges of all machineries, labour cess etc. complete in all respects as per specification and direction of the Engineer-in-Charge. |
| 2 | Filling in foundation & plinth with sand well watered to saturated condition and rammed including all cost, carriage, royalty, taxes of materials with all labour charges cess etc. complete as per the direction of the Engineer-in-Charge. |
| 3 | Cement Concrete (1:3:6) with 40mm size hard granite crusher broken metal confirming to relevant BIS specifications with all cost, conveyance, royalty of all materials T&P, cess including scaffolding, walkways & properly mixing, hoisting & placing concrete to desired workability & curing for recommended period etc. complete as per the direction of the Engineer-in-Charge. |
| 4 | Cement concrete of proportion (1:2:4) using 12mm size hard granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete and compacting in layers not exceeding 15cm thick with proper packing and ramming each layer of concrete by means of vibrator including watering and curing etc.complete including cost, conveyance, royalty taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 5 | Providing R.C.C work of M-20 grade with 20mm and downgraded clean hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete with necessary slope and smoothness to receive tar felting or terracing, watering and curing for four weeks, excluding centering, shuttering and finishing the exposed surface and ceiling smooth to receive white washing or painting providing grooves or beads and fan hooks as per requirement in ceiling where necessary, cost of water, including cost, conveyance, royalty taxes of all the materials and labour, T&P and cess etc. complete in all respect but excluding cost of M.S rods or Tor steel and binding wire 18 to 20 gauge and labour charges for straightening, cutting, bending and binding and tying the grills and placing in proper position as per specification and direction of the Engineer-in-charge. (R.C.C Column Base, Footing & Plinth Beam (Ground Floor)) |
| 6 | R.C.C. Columns and Beams (Ground Floor) |
| 7 | R.C.C. Columns and Beams (First floor) |
| 8 | R.C.C. Lintels (Ground Floor) |
| 9 | R.C.C. Lintels (First Floor) |
| 10 | R.C.C. Roof Slab & Chajja (Ground Floor) |
| 11 | R.C.C. Roof Slab & Chajja (First Floor) |
| 12 | R.C.C. Stair Case (Ground Floor) |
| 13 | R.C.C. Stair Case (First Floor) |
| 14 | Supplying, fitting, fixing of HYSD including labour charges for straightening, cutting, bending and binding the H.Y.S.D. Bar or tor steel and tying the grills and placing in position (confirming to I.S.I specification) including jointing if necessary by lapping, welding as required for R.C.C work as per approved drawing and design & binding with binding wire 18 to 20 gauge including cost carriage and other taxes of all materials with all leads, lifts & delifts of reinforcement bars etc. complete as per the direction of the Engineer-in-charge (Foundation) |
| 15 | First Floor |
| 16 | Brick work with Fly ash Bricks masonry in dimensional tolerance ±8 percent in cement motar (1.6) in foundation & plinth moulding & similar such type of work with all necessary projections using K.B bricks 9\\"/10\\" size having a crushing strength of 87kg / sqcm with splays cutting circular moulding chamfering & cerbelling watering & after immersing the bricks in water for six hours before using etc. complete including all cost of materials conveyance, royalty and all other taxes including watering and curring etc. complete as per the direction of the Engineer-in-Charge. (Ground Floor |
| 17 | Brick work with Fly ash Bricks masonry in dimensional tolerance ±8 percent in cement motar (1.6) in supersrtructure moulding & similar such type of work with all necessary projections using K.B bricks 9\\"/10\\" size having a crushing strength of 87kg / sqcm with splays cutting circular moulding chamfering & cerbelling watering & after immersing the bricks in water for six hours before using etc. complete including all cost of materials conveyance, royalty and all other taxes including watering and curring etc. complete as per the direction of the Engineer-in-Charge. (Ground Floor) |
| 18 | First Floor |
| 19 | Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete as per direction of the Engineer-in-Charge. |
| 20 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete as per direction of the Engineer-in-Charge. |
| 21 | Supplying, fitting and fixing of M.S doors and windows frame with M,S shutters & windows grill of approved design in proper position making good to the damges of walls of R.C.C or other structural etc. including mending or cutting sizes or grooves in chaukhats with cost, conveyance, taxes of all materials required for the work, labour and T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 22 | Supplying, fitting, fixing of window (sliding type) made up of aluminium section 9778 as windows frame section no.4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement, all fittings including cost of all materials, taxes, labour, T&P, cess, and hire charges of drilling machine, labour charges etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 23 | Supplying, fitting and fixing of vitrified tiles in landing treads of stapes and floors of size 600mm x 600mm of approved make conforming to IS 13755 laid on 20mm thick cement morter bed (1:4) and the jointed with white cement of approved quality including cost, carriage, taxes all materials and royalty of sand including all labour T&P etc. required with all lead lift & delifts for all floors etc. complete in all respects as per specification and direction of the Engineer-In-Charge. |
| 24 | Supplying, fitting and fixing of vitrified tiles of size 300mm x 300mm in dadoo skirting and rises of steps on 12mm thick cement mortar (1:3) and filling joints with neat cement slorry mixed with pigment to match the shades of the tiles including cost, carriage, taxes all materials and royalty of sand including all labour T&P etc. required with all lead lift & delifts for all floors etc. complete in all respects as per specification and direction of the Engineer-In-Charge. |
| 25 | Painting two coats of synthetic enamel paind over a coat of primer with any approved paint with brush to wood/iron work including cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 26 | Finishing walls with plastic emulsion paint of approved colour to approved shade two coats over a coat of primer to give an even shade including cost, conveyance, taxes of all materials, labour, T&P etc. complete as per direction of Engineer-in-Charge. |
| 27 | Finishing walls with water proofing weather coat of approved shade on new work two coats to give an even shade with cost, conveyance, taxes of all the materials required for the work and labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
