|
| 1 | Dismantling manually/ mechanically including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: i) Water bound macadam road. (Quantity is subjected to actual requirement at site) |
| 2 | ii) Bituminous road. (Quantity is subjected to actual requirement at site) |
| 3 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: (Quantity is subjected to actual requirement at site)i.) All kinds of soil |
| 4 | ii) Ordinary Rock |
| 5 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth with lead of 1 meter from cutting edge as directed: (Quantity is subjected to actual requirement at site)i.) All kinds of soil |
| 6 | ii) Ordinary Rock |
| 7 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. (Quantity is subjected to actual requirement at site) |
| 8 | Dismantling C.I./D.I. pipes manually/by mechanical means breaking lead caulked joints, melting of lead & making into blocks incld. stacking of pipes at site within 50m lead as per direction of Engineer I/C excluding excavation and refilling trenches after taking out the pipes. (Quantity is subjected to actual requirement at site)i. Upto 150 mm diameter. |
| 9 | i. Above 150 mm dia upto 300 mm dia. |
| 10 | Above 300 mm diameter. |
| 11 | Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe) (Quantity is subjected to actual requirement at site) |
| 12 | Supply/providing of M.S fittings viz bends of suitable degrees / size to be fabricated out of 8mm to 10mm thick MS. plate as per the requirement of site. The fittings should be painted with Anticorrosive Red Oxide Primer and is incld. all carriages, leads lifts, etc. complete. (Quantity is subjected to actual requirement at site) |
| 13 | Welding of pipe / pipe fittings by way of engaging generator, welding set including all types of carriage involved. (Complete Job).(Quantity is subjected to actual requirement at site) |
| 14 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. (Quantity is subjected to actual requirement at site) |
| 15 | Supply and Filling of trenches by GSB / Nallah Muck from approved source including all carriages upto actual site of work. It shall not contain excessive quantity of loam. The item including ramming, consolidation in layers, charges of T&P, equipment’s etc. required for completion of job.(Quantity is subjected to actual requirement at site) |
| 16 | Supply and filling of 2nd class sand / stone dust around pipes at different spots from available approved source including all carriages, leads and lifts upto the site of work including spreading of stone dust, levelling dressing including compaction in all respects. Complete Job. (Quantity is subjected to actual requirement at site) |
| 17 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-charge: 1:3:6 or richer mix (i/c equivalent design mix). (Quantity is subjected to actual requirement at site) |
| 18 | Maintenance/repairs/lubrication/greasing of sluice valves of various dia. by way of dismembering and replacement of worn out/damaged parts i.e, spindle rods, check nuts, washers, packing, including their fabrication of required size/dia. making of temporary arrangements of sluice valve during repairs including all carriages from site to workshop and back to site. This item also includes hire charges of chain block arrangements required for lifting and laying of sluice valves. (Complete job). (Quantity is subjected to actual requirement at site)i. 100mm dia |
| 19 | i. 150mm dia |
| 20 | ii. 200mm dia |
| 21 | iii. 300mm dia |
| 22 | iv. 350mm dia |
| 23 | 400mm dia |
| 24 | Providing and laying of dry stone soling in foundation/trenches hand packed and consolidated by hand ramming including all carriages upto site of work saddle/anchor/thrust blocks. (Quantity is subjected to actual requirement at site) |
| 25 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). (Quantity is subjected to actual requirement at site) |
| 26 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) (Quantity is subjected to actual requirement at site) |
| 27 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (Quantity is subjected to actual requirement at site)i.) In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. |
| 28 | ii) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 29 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. TMT bars of grade Fe-500D or more. (Quantity is subjected to actual requirement at site) |
| 30 | Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, etc. for concrete including all carriages. (For saddle/anchor/thrust blocks). (Quantity is subjected to actual requirement at site) |
| 31 | Providing and laying in position reinforced cement concrete 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size crushed stone agg) excld. the cost of centering, shuttering and reinforced steel.) upto plinth level for saddle/anchor/thrust blocks. (Quantity is subjected to actual requirement at site) |
| 32 | Providing refreshment to supervisory staff & departmental labour for prolonged/continuous operation of repair/ restoration/ maintenance work of pipelines. Complete job including packing with following items. (Quantity is subjected to actual requirement at site)i. Water Bottle 250ml. |
| 33 | i. Juice tetra pack 200 ml of standard quality. |
| 34 | ii. Boiled Egg/Omelete. |
| 35 | iii. Biscuit standard quality of 100 g pack. |
| 36 | iv. Banana. |
| 37 | v. Bread toast without butter |
| 38 | vi. Lipton tea cup with sugar |
| 39 | vii. Namkeen tea cup. |
| 40 | Normal Chicken Biryani one box for one person |
| 41 | Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered): i. Depth exceeding 1.5m but not exceeding 3.0 m(Quantity is subjected to actual requirement at site) |
| 42 | Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, allincidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge. (Quantity is subjected to actual requirement at site)(Note:- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work). |
| 43 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.(Quantity is subjected to actual requirement at site) |
| 44 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar.(Quantity is subjected to actual requirement at site) |
| 45 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar(Quantity is subjected to actual requirement at site) |
| 46 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead |
| 47 | Carriage of material from different sources to actual site of work by mechanical transport. (Quantity is subjected to actual requirement at site)i. Cement & Steel from local market for an avg. lead of 30 Kms |
| 48 | ii. Sand & 20mm stone agg. nominal size for avg. lead of 30 Kms. |
| 49 | iii. 40mm dia. Stone aggregate for an avg. lead of 30 Kms. |
| 50 | iv. Carriage of pipes/sluice valves from divisional store to site and any leftover/retrieved pipes/ sluice valves or any other departmental material from site to divisional store including loading, unloading, stacking etc. |
| 51 | Labour for cutting C.I. pipe with steel saw. i. 80 mm diameter C.I. pipe |
| 52 | i. 100 mm diameter C.I. pipe |
| 53 | ii. 125 mm diameter C.I. pipe |
| 54 | iii. 150 mm diameter C.I. pipe |
| 55 | iv. 200 mm diameter C.I. pipe |
| 56 | v. 250 mm diameter C.I. pipe |
| 57 | vi. 300 mm diameter C.I. pipe |
| 58 | vii. 350 mm diameter C.I. pipe |
| 59 | viii. 400 mm diameter C.I. pipe |
| 60 | ix. 450 mm diameter C.I. pipe |
| 61 | x. 500 mm diameter C.I. pipe |
| 62 | xi. 600 mm diameter C.I. pipe |
| 63 | 700 mm diameter C.I. pipe |
| 64 | Providing of M.S flanges of thickness 12mm for pipes of different dia.’s including cost of nuts, bolts, washers etc.i. 80mm dia. |
| 65 | i. 100mm dia |
| 66 | ii. 150mm dia |
| 67 | iii. 200mm dia |
| 68 | iv. 250mm dia |
| 69 | v. 300mm dia |
| 70 | vi. 400mm dia |
| 71 | vii. 450mm dia |
| 72 | viii. 500mm dia |
| 73 | ix. 600mm dia |
| 74 | x. 700mm dia |
| 75 | xi. 750mm dia |
| 76 | xiii. 800mm dia(Quantity is subjected to actual requirement at site) |
| 77 | Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead.i. 100 mm dia. pipe |
| 78 | i. 125 mm dia. pipe |
| 79 | ii. 150 mm dia. pipe |
| 80 | iii. 200 mm dia. pipe |
| 81 | iv. 250 mm dia. pipe |
| 82 | v. 300 mm dia. pipe |
| 83 | vi. 350 mm dia. pipe |
| 84 | vii. 400 mm dia. Pipe |
| 85 | viii. 450 mm dia. pipe |
| 86 | ix. 500 mm dia. pipe |
| 87 | 600 mm dia. pipe |
| 88 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints & including the cost of rubber gasket. i. 100 mm dia pipes |
| 89 | i. 150 mm dia pipes |
| 90 | ii. 200 mm dia pipes |
| 91 | iii. 250 mm dia pipes |
| 92 | iv. 300 mm dia pipes |
| 93 | v. 350 mm dia pipes |
| 94 | vi. 400 mm dia pipes |
| 95 | vii. 450 mm dia pipes |
| 96 | viii. 500 mm dia pipes |
| 97 | ix. 600 mm dia pipes |
| 98 | x. 650 mm dia pipes |
| 99 | xi. 700 mm dia pipes |
| 100 | 800 mm dia pipes |
| 101 | Supply of fitter / labours.i. Fitter |
| 102 | ii. Asstt. Fitter |
| 103 | iii. Labour(Quantity is subjected to actual requirement at site) |
| 104 | Supply of pig lead at site of work including all carriages. |
| 105 | Supply of Spun Yarn. (Quantity is subjected to actual requirement at site) |
| 106 | Supply of Fire Wood. (Quantity is subjected to actual requirement at site) |
| 107 | Supply of Kerosene Oil. (Quantity is subjected to actual requirement at site) |
| 108 | Providing and fixing of ISI marked internally placed (concealed) shutter lock of reputed make for sluice chambers with 3 No. keys.(Quantity is subjected to actual requirement at site) |
| 109 | Providing and fixing of heavy duty barrel hinges for sluice chamber lids.(Quantity is subjected to actual requirement at site) |
| 110 | Shingle clearance from canals/nallah including extraction/ removal of isolated boulders at Head Works. (Quantity is subjected to actual requirement at site) |
| 111 | Constructing muthu bunds, comprising boulders and wood bushes in alternate layers; including working in water situations at Head works. It also includes laying of earth/sand filled bags, cost of sewing, handling, placing in position and all sorts of carriages, leads, lifts involved at the site complete. (Quantity is subjected to actual requirement at site) |
| 112 | Desilting of raw water sump at head works by removing silt, kankars etc. by means of shovel, spade, bucket, rope etc. whatever required by manual labour including disposal of same within a lead of 100m including cleaning the blocked/choked washout pipe. The job also includes charges of tools and tackles required for the job, leads & lifts, ladders, buckets, ropes, all carriages etc. (Complete Job).(Quantities subject to actual during execution.) |
| 113 | Clearing snow manually (without frost) from approach road at Head Works.(Quantities subject to actual during execution.) i. Snow depth over 350 mm but upto 450mm |
| 114 | i. Snow depth over 450 mm but upto 550mm |
| 115 | Snow depth over 550 mm but upto 650mm |
| 116 | Replacement of old worn out/damaged manually operated winches machines for M.S. Gates with new ones as per the directions of engineer incharge. This item includes cost of providing and fixing of new winches including fitting and all carriages up to site complete job. (Quantity is subjected to actual requirement at site) |
| 117 | Providing and fixing /Repairing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. i. Made of G.I. wire of dia 4 mm(Quantity is subjected to actual requirement at site) |
| 118 | Replacement of old damaged C.I/D.I. Sluice valve by providing / fixing of new Sluice valve of Reputed make like Vag/Talis/Kirloskar/Zoloto/AVK etc. as per approval of Engineer Incharge etc including cost of nuts, bolts, rubber insulations all carriages and taxes upto site of work, complete (Quantity is subjected to actual requirement at site)i. 100mm dia. |
| 119 | i. 150mm dia |
| 120 | ii. 200mm dia |
| 121 | iii. 300mm dia |
| 122 | iv. 350mm dia |
| 123 | v. 400mm dia. |
| 124 | Maintenance & repairs to solar photo voltaic panels (SVP=4 No.), LED luminaries (5 No.), 150 Ah battery (1 No.), charging controller (12/24 volt 10/20 Amp), battery trolley, 2.5 sq.mm wires etc to keep the lighting system fully functional. The item includes supply/filling of gravity acid 12.60% (Distilled Water) for lead-acid batteries including all carriages up to the sites, emptying the batteries of old gravity acid, disposing it in a safe manner, cleaning of batteries and refilling of batteries with new gravity acid (distilled water) using required funnel, dropper, boost charging of batteries with generator as power supply at the sites is not available, hire charges of generator, operator, fuel, all carriages up to sites and back to the service provider, replacing of worn out wires/connectors/cables etc. as per the requirement of site. (Complete Job). (Quantity is subjected to actual requirement at site) |
| 125 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately). i) 50 mm dia. |
| 126 | 80 mm dia. |
| 127 | 100 mm dia. (Quantity is subjected to actual requirement at site) |
| 128 | Providing of following mandatory items at Head Works including all taxes and carriages as per approval of Engineer-Incharge:(Quantity is subjected to actual requirement at site)i. 150 Ah tall tubular battery of standard make like exide, luminous, amaron, livguard etc. including fixing with required cables/connetors etc complete. |
| 129 | i. Rechargeable LED Torch 4 Watt including all taxes |
| 130 | ii. Shovels of ISI marked Tata make |
| 131 | iii. Pick axe of standard make |
| 132 | iv. Spade of standard make |
| 133 | Rake (Panja) of standard make |
| 134 | vii. 12mm thick EPE foam of standard for quarter at head works. |
| 135 | viii. Versa type matting of standard make for quarter at head works. |
| 136 | i. Razai/Matress (fibre filled) |
| 137 | ii. Razai/Matress covers. |
| 138 | Mink Blankets |
| 139 | xii. Long Gumboots of reputed quality like duckback or equivalent |
| 140 | xiii. Rain coats of reputed quality like duckback or equivalent(Quantity is subjected to actual requirement at site) |
| 141 | Providing and fixing of 3 inches wide Caution tape of standard make at working sites |
| 142 | Providing and fixing of superior type tent including interior furnishing, carpet etc. on rent basis including loading, unloading and all carriages up to site and back. (complete job) (Quantity is subjected to actual requirement at site) |
| 143 | Providing of PVC outdoor chairs on rent basis including loading, unloading and all carriages up to site and back. (complete job)(Quantity is subjected to actual requirement at site) |
| 144 | Providing of superior type sofas sets on rent basis including loading, unloading and all carriages up to site and back. (complete job)(Quantity is subjected to actual requirement at site) Please Enable Macros to View BoQ information |
