|
| 1 | Demolition of Cement concrete in ground floors and pavings n.exc 15 cm thickness below or above ground level) and removing debris out of MOD land. Complete all as specified and directed by Engr-in-charges. |
| 2 | Demolition of Cement concrete (including cutting of reinforcement if any) in any description and any position not otherwise specifically provided for and removing debris out of MOD land. Complete all as specified and directed by Engr-in-charges. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises Complete all as specified and directed by Engr-in-charges. |
| 4 | M&L for 18-20mm thick Udaipur green marble machine cut in washbasin platform laid over 10mm thick screed bed in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including polishing and rounding the edges Complete all as specified and directed by Engr-in-charges. |
| 5 | M&L for 25 mm thick cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) to receive floor finishes etc Complete all as specified and directed by Engr-in-charges. |
| 6 | M&L for ceramic colour tiles in vertical surface of size 350 X 250 x 7/450x300x7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, Complete all as specified and directed by Engr-in-charges. |
| 7 | M&L of 18-20mm thick machine cut KOTA stone slab as in floor (size not less than 580mm x 580mm) , treads, steps etc(Single piece for steps), machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, incl rubbing and Mirror polishing all as specified as in floors over and including 15mm thick in screed bed in CM (1:6). Complete all as specified and directed by Engr-in-charges. |
| 8 | M&L of 18-20mm thick machine cut KOTA stone slab riser of step , skirting, dado etc(Single piece for steps), machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, incl rubbing and Mirror polishing all as specified including backing coat of 10mm thick in CM (1:4). Complete all as specified and directed by Engr-in-charges. |
| 9 | M&L for non skid coloured ceramic tiles 6 to 8 mm thick ( square, rectangular ) area of each tiles exc 0.11 sqm but n exc 0.18sqm as per IS 13712 Grade II(a) , in floor etc over and including 15mm thick screed bed in CM (1:6) Complete all as specified and directed by Engr-in-charges. |
| 10 | Taking down cement plaster on stone masonry RCC surfaces, dado surfaces etc complete incl racking out joints, hacking for key scrubbing down with water Complete all as specified and directed by Engr-in-charges. |
| 11 | M&L for 15mm thick rendering in CM 1:6 on stone masonry finished even and smooth without using extra cement Complete all as specified and directed by Engr-in-charges. |
| 12 | M&L Rendering 10 mm thick in CM (1:4) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth without using extra cement Complete all as specified and directed by Engr-in-charges. |
| 13 | Raking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar Complete all as specified and directed by Engr-in-charges. |
| 14 | M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 Complete all as specified and directed by Engr-in-charges. |
| 15 | M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and incl a layer of primer with 1mm thick wall care putty to get even and smooth level finish on new plastered surface Complete all as specified and directed by Engr-in-charges. |
| 16 | M&L for three coats of white wash including preparation of new surfaces as on ceilings Complete all as specified and directed by Engr-in-charges. |
| 17 | M&L for one coat of white wash including preparation of old surfaces as on ceilings Complete all as specified and directed by Engr-in-charges. |
| 18 | M/L two coat of cement based paint on old plastered/ unplastered surfaces including preparation Complete all as specified and directed by Engr-in-charges. |
| 19 | M/L two coat of cement based paint on new plastered/ unplastered surfaces including preparation Complete all as specified and directed by Engr-in-charges. |
| 20 | Taking down chowkat with shutters (without taking off shutter from frame) size area n.exc1.50 sqm each Complete all as specified and directed by Engr-in-charges. |
| 21 | Taking down chowkat with shutters (without taking off shutter from frame) size area exc 1.5sqm but n.exc4.0 sqm each Complete all as specified and directed by Engr-in-charges. |
| 22 | S&F PVC door frame wooden finish of size 50mmx 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube. Complete all as specified and directed by Engr-in-charges. |
| 23 | M/L for PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate as in bed block for hold fast , filling in frame including necessary form work Complete all as specified and directed by Engr-in-charges. |
| 24 | Taking down of steel window and ventilators Complete all as specified and directed by Engr-in-charges. Please Enable Macros to View BoQ information |
| 25 | Taking down of steel window and ventilators Complete all as specified and directed by Engr-in-charges. Please Enable Macros to View BoQ information |
