|
| 1 | Material and labour for brick work with sub class ‘B’ bricks(old size), straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6) including demolition of brick work built in cement mortar including demolition of old brick/stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed. |
| 2 | Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed. |
| 3 | Material and labour for 15 mm thick rendering in cement mortar 1:4 on on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specifeid |
| 4 | Material and labour 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work finished even and smooth complete all as specified |
| 5 | Material and labour for preparation of wall and applying interior grade wall care putty 1.5 mm thick to make the surface smooth as specified and directed. |
| 6 | Material and labour for preparation of wall and applying exterior grade wall care putty 1.5 mm thick to make the surface smooth as specified and directed. |
| 7 | Materail and labour for preparation of new surface of wall and applying two coats of oil bound distemper including and over priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed. |
| 8 | Materail and labour for preparation with complete removal of existing treatment of old surface of wall and applying two coats of oil bound distemper including and over priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed. |
| 9 | Materail and labour for preperation of new plastered surface and applying two or more coatsof 100% premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces. complete all as specified and directed. |
| 10 | Materail and labour for preperation with complete removal of existing treatment of old plastered surface and applying Two or more coatsof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed. |
| 11 | Taking down chowkat with shutter of any description (without taking of shutter from frame) exceeding 1.5 Sqm but n. exc 4.0 Sqm each complete all as specified and as directed . |
| 12 | Supply and fixing of pressed steel frames size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed. |
| 13 | Supply and fixing of pressed steel frames size 165x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed. |
| 14 | Supply and fix flush shutters 30 mm thick one face is covered with decorative face veneer teak wood finished with lipping/frame to match , solid core construction, with block board core and plywood face panels, commercial type on other sides, complete all as specified and as directed. |
| 15 | Supply and fixing of 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed. |
| 16 | Supply and fixing of stainless steel 304 grade wire 0.36 mm nominal dia of wire and average width of aperture 1.40 mm as in wooden or metal frame of any description complete all as specified and as directed. |
| 17 | Materail and labour for preparation of new or previously untreated surfaces of wood over 10 cm width/girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified in SSR Part I and directed . |
| 18 | Supply and fix 150mm size solid in one piece stainless steel 202 grade bright finish handles, D type and fixed with stainless steel screws complete all as specified and directed . |
| 19 | Supply and fix 150mm size solid in one piece stainless steel 202 grade bright finish barrel tower bolt 10 m dia shoot and fixed with stainless steel screws complete all as specified and directed |
| 20 | Supply and fix 100 mm size stainless steel butt hinges medium weight cold rolled fixed/ welded to frame complete all as directed. |
| 21 | Supply and fix stainless steel sliding door bolts SS 204 grade, hasp and staple type with bright bolt not less than 16mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long complete all as specified |
| 22 | Supply and fixing of Floor door stopper of Aluminium alloy body double spring and tongue, overall length of cover plate 150 mm , anodized, with hard drawn steel spring , fixed to shutters complete all as specified and as directed. |
| 23 | Materail and labour for applying one coat of synthetic enamel paint on old painted steel surfaces of any description including preparation of steel surfaces complete all as specified and as directed. |
| 24 | Material and labour preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified and as directed. |
| 25 | Material and labour for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection finished fair and even smooth without using extra cement including demolition of existing old cement concrete in ground floors and pavings n.exc 15cm thickness (below or above) ground level complete all as specified and directed. Note:- The plinth protection shall be laid in panels and lenth of each panel shall not be more than 2.50 m and at every turning and 10mm joints filled with 85/25 grade bituman and sand mixture in the ratio (1:3) shall be provided. |
| 26 | Materail and labour for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work including demolition of existing concrete etc complete all as specified and directed |
| 27 | Supply and fixing in repair of factory made pre laminated WPC flush type shutter of 18mm (+ 0.5) thickness consisting of panel of 18mm (+0.7mm) thick celuka ply, of denistity 600 Kg per cum manufactured by ISO-9000 certified company, using for shutter celuka ply 18mm thick and fixed with frame, all four edges of shutters, using 13/6 size self tapping steel screws. The thickness of shutter is edges painted by matching colour of PVC lining of prelam coloured PVC sheet using etc, complete as per manufactue specification complete all as specified and directed |
| 28 | Supply and fixing of continuous (Piano) hinges, mild steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and ditected. |
| 29 | Supply and fix magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 30 | Materail and labour for 25 mm thick cement concrete in 1:2:4 type B-1 ( 20 mm graded aggregate including demolition of existing PCC etc complete all as specified and directed |
| 31 | Materail and labour for vitrified ceramic tiles light shade 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. over and including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry @3.00 Kg/Sqm and pointed in white or coloured cement to match with tile including dismantling of existing tiling complete all as specified |
| 32 | Materail and labour for vitrified ceramic tiles light shade 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/ dado etc. over and including rendering/screed bed 10 mm thick in CM 1:4 set and jointed in neat cement slurry @3.00 Kg/Sqm and pointed in white or coloured cement to match with tile including dismantling of existing tiling complete all as specified and directed. |
| 33 | Material and labour for hardcore of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and as directed. |
| 34 | Material and labour for 100mm thick cement concrete 1:4:8 type D2 40mm graded stone aggregate all as specified and directed |
| 35 | Material and labour for coloured prepolished rubber moulded chequred cement concrete tile 30 cm x 30 cm x 20 to 22 mm thick with spacers 3mm set, jointed and pointed in neat cement slurry @ 3.0 Kg/Sqm as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of existing tiling complete all as specified and directed. |
| 36 | Supply and fix 4 mm thick 'E' board (classic) of size 600x600 mm false ceiling including & fixing of frame work made of special section MS sheet glavanised with zine coating , cellular nitro painting & consisting of angle cleats of size 25 mm wide, 1.60 mm thick with flange fixing to the ceiling with dash fastener 12.5 mmx40 mm long or with 4 mm dia GI wire or fixed with nails or bolts in GI channel 45x14x0.90 mm runner at 600 mm c/c including fixing of E board with ceiling section & perimeter of angle 25x25x0.50 mm thick including taking down the existing ceilling complete all as specified and directed. |
| 37 | Supply and fix framed work such as grills,gratings,etc., with ends of bars shouldered or riveted, or forged into spikes; framed guard bars;barred iron doors and similar work conforming to Fe 210,Gde E-165 complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 38 | Supply and fix framed work such as grills,gratings,etc., with ends of bars shouldered or riveted, or forged into spikes; framed guard bars;barred iron doors and similar work conforming to Fe 210,Gde E-165 complete all as specified and as directed. Please Enable Macros to View BoQ information |
