|
| 1 | Material and labour for brick work with sub class ‘B’ bricks(old size), straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6) including demolition of brick work built in cement mortar including demolition of old brick/stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed. |
| 2 | Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed. |
| 3 | Materialand labour for 15 mm thick rendering in cement mortar 1:4 on on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specifeid |
| 4 | Material and labour for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work finished even and smooth complete all as specified |
| 5 | Material and labour for 10 mm thick rendering in cement mortar 1:3 on on fair faces of concrete surfaces finished even and smooth as in ceiling cement complete all as specifeid |
| 6 | Material and labour for preparation of wall and applying interior grade wall care putty 1.5 mm thick to make the surface smooth as specified and directed. |
| 7 | Material and labour for preparation of wall and applying exterior grade wall care putty 1.5 mm thick to make the surface smooth as specified and directed. |
| 8 | Material and labour for preparation of new surface of wall and applying two coats of oil bound distemper including and over priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed. |
| 9 | Material and labour for preparation with complete removal of existing treatment of old surface of wall and applying two coats of oil bound distemper including and over priming plastered and other surfaces with alkali resistant priming paint complete all as specified and directed. |
| 10 | Material and labour for preperation of new plastered surface and applying two or more coatsof 100% premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces. complete all as specified and directed. |
| 11 | Material and labour for preperation with complete removal of existing treatment of old plastered surface and applying Two or more coatsof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed. |
| 12 | Taking down chowkat with shutter of any description (without taking of shutter from frame) n. exc 1.5 Sqm each complete all as specified and as directed . |
| 13 | Taking down chowkat with shutter of any description (without taking of shutter from frame) exceeding 1.5 Sqm but n. exc 4.0 Sqm each complete all as specified and as directed . |
| 14 | Supply and fixing of pressed steel frames size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed. |
| 15 | Supply and fixing of pressed steel frames size 165x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed. |
| 16 | Supply and fix flush shutters 30 mm thick one face is covered with decorative face veneer teak wood finished with lipping/frame to match , solid core construction, with block board core and plywood face panels, commercial type on other sides, complete all as specified and as directed. |
| 17 | Supply and fixing of 30mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed. |
| 18 | Supply and fixing of stainless steel 304 grade wire 0.36 mm nominal dia of wire and average width of aperture 1.40 mm as in wooden or metal frame of any description complete all as specified and as directed. |
| 19 | Material and labour for preparation of new or previously untreated surfaces of wood over 10 cm width/girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified in SSR Part I and directed . |
| 20 | Supply and fixing of factory made 100% solid wood plastic composite ( WPC) door frame of size 70 mm x 40 mm mm made from wood plastic composite (single etruded process) material with density 750 kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specified and drawing complete all as specified and diercted. |
| 21 | Supply and fixing of 30mm thick moulded WPC factory made 100 % solid ( conforming as per IS-4020) made from lead free single extruded with 2,4, or 6 raised panel design on the front side with 10 mm deep mould on single with grain texure and back side plain with density not less than 650 Kg/cum, Manufacturer by an ISO: 9001-2015 certified company. The door should be water proof, termite proof, fire retardent and having screw holding capacity complete all as specified and diercted. |
| 22 | Supply and fixing of 150mm size solid in one piece stainless steel 202 grade bright finish handles, D type and fixed with stainless steel screws complete all as specified and directed . |
| 23 | Supply and fixing of 150mm size solid in one piece stainless steel 202 grade bright finish barrel tower bolt 10 m dia shoot and fixed with stainless steel screws complete all as specified and directed |
| 24 | Supply and fixing of 100 mm size stainless steel butt hinges medium weight cold rolled fixed/ welded to frame complete all as specified and directed |
| 25 | Supply and fixing of stainless steel sliding door bolts SS 204 grade, hasp and staple type with bright bolt not less than 16mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long complete all as specified and directed |
| 26 | Supply and fixing of Floor door stopper of Aluminium alloy body double spring and tongue, overall length of cover plate 150 mm , anodized, with hard drawn steel spring , fixed to shutters complete all as specified and as directed. |
| 27 | Material and labour for applying one coat of synthetic enamel paint on old painted steel surfaces of any description including preparation of steel surfaces complete all as specified. |
| 28 | Supply and fixing of continuous (piano) hinges, mild steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and ditected. |
| 29 | Supply and fixing of magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 30 | Material and labour for 25 mm thick cement concrete in 1:2:4 type B-1 ( 20 mm graded aggregate including demolition of existing PCC etc complete all as specified and directed |
| 31 | Supply and fixing in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) water closet,including connection to trap and to flushing pipe,anti syphonage pipe etc and making good to floor complete all as specified and directed. |
| 32 | Supply and fixing in repair of vitreous China urinals, half stall type white(back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe (exclusive offixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. |
| 33 | Supply and fixing in repair of vitreous chinaware wash down water closet pan padestal pattern white with seat cover excluding fixing bolts but including jointing to flushing cistern and flush pipe anti syphonage pipe including Jet spray etc complete all as specified and directed |
| 34 | Supply and fixing in repair of 10 ltr capacity PVC low level flushing cistern 'white' with inlet ,float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed |
| 35 | Supply and fixing in repair of 15mm dia CP brass chromium plated Central hole basin/sink mixer with accessories for fixing hot and cold water, dcrewed down for 15mm bore GI pipe, complete all as specified and directed |
| 36 | Supply and fixing in repair of looking mirror size 600x450x5mm selected qualaity mounted on 6mm commercial plywood and fixed with brass screw and cup washer incl aluminium frame complete all as specified and directed |
| 37 | Supply and fixing in repair of 15mm bore chromium plated fancy type bib tap of cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified and directed |
| 38 | Supply and fixing in repair of chromium plated stop valves/ angle valve/ concealed angle valve etc, cast copper alloy, screwed down both high pressure, with crutch or butterfly handle, screwed both ends fixed, 15mm bore complete all as specified |
| 39 | Supply and fixing in repair of 15mm nominal internal bore PVC connection 450mm long with two brass nuts and PVC washer complete all as specifed |
| 40 | Supply and fixing in repair of vitreous china padestal wash hand basin, white flat back, size 580x450mm excluding taps, waste pipe chain and plug and porcelain but including brackets all as specified |
| 41 | Supply and fixing in repair of brass chromium plated ovehead shower with shower arm complete all as specified and directed. |
| 42 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing and removing from site ,complete all as specified and directed. |
| 43 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for20 mm bore GI tubing and removing from site, complete all as specified and directed. |
| 44 | Supply and fixing of galvanised steel water tubing medium grade (ISI marked) with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and directed. |
| 45 | Supply and fixing of galvanised steel water tubing medium grade (ISI marked) with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and directed. |
| 46 | Supply and fixing in repair of 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top), three layered, hoisted and fixed in position all as specified in SSR Part I including 20 mm brass float valve with pvc ball complete all as specified and directed. |
| 47 | Supply and fixing in repair of 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top), three layered, hoisted and fixed in position all as specified in SSR Part I including 20 mm brass float valve with pvc ball complete all as specified and directed. |
| 48 | Material and labour for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection finished fair and even smooth without using extra cement including demolition of existing old cement concrete in ground floors and pavings n.exc 15cm thickness (below or above) ground level complete all as specified and directed. Note:- The plinth protection shall be laid in panels and lenth of each panel shall not be more than 2.50 m and at every turning and 10mm joints filled with 85/25 grade bituman and sand mixture in the ratio (1:3) shall be provided. |
| 49 | Supply and fixing of 75 mm bore PVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall including dismantling of old pipes complete all as specified. |
| 50 | Supply and fixing of 110 mm bore PVC (SWR) pipe 4 kgf/cm2 single socketed in any length with rubber ring, fixed on wall including dismantling of old pipes complete all as specified. |
| 51 | Supply and fixing of 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed |
| 52 | Materialand labour for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work including demolition of existing concrete etc complete all as specified and directed |
| 53 | Material and labour for 18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of existing complete all as specified and as directed. |
| 54 | Supply and fixing in repair of 20mm dia brass chromium plated tubular towel rails fancy, D type, 60cm long between flanges, complete all as specified. |
| 55 | Supply and fixing in repair of s CP brass Soap dish 6 inches size, complete all as specified and directed. |
| 56 | Supply and fixing in repair of glass shelf assembly consisting of 5.5 mm thick toughened glass with CP railing and brass brackets of size 500x125 mm, complete all as specified and directed. |
| 57 | Supply and fixing in repair of 20 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative nobs at both ends complete all as speccified and directed as per approved sample . |
| 58 | Supply and fixing in repair of glass corner shelf suitable size made of 5 mm thick toughened glass with CP railing complete all as specified and directed |
| 59 | Material and labour for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting exc 10 but not exc 20cm girth complete all as specified and directed. |
| 60 | Supply and fixing of factory made pre laminated WPC flush type shutter of 18mm (+ 0.5) thickness consisting of panel of 18mm (+0.7mm) thick celuka ply, of denistity 600 Kg per cum manufactured by ISO-9000 certified company, using for shutter celuka ply 18mm thick and fixed with frame, all four edges of shutters, using 13/6 size self tapping steel screws. The thickness of shutter is edges painted by matching colour of PVC lining of prelam coloured PVC sheet using etc, complete as per manufactue specification complete including taking down the existing board etc complete all as specified and directed. |
| 61 | Supply and fix hollow profile PVC Wall panneling consisting of 5mm thick PVC sheet inclusive of solvent and fixing to walls on PVC frame including all fillets as per specifications and drawing including taking down the existing Wall penalling etc complete all as specified and directed. |
| 62 | Material and labour for vitrified ceramic tiles light shade 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. over and including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry @3.00 Kg/Sqm and pointed in white or coloured cement to match with tile including dismantling of existing tiling complete all as specified |
| 63 | Materialand labour for vitrified ceramic tiles light shade 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/ dado etc. over and including rendering/screed bed 10 mm thick in CM 1:4 set and jointed in neat cement slurry @3.00 Kg/Sqm and pointed in white or coloured cement to match with tile including dismantling of existing tiling complete all as specified |
| 64 | Material and labour for non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6- 7 mm thick in floor, set and jointed in neat cement slurry @3.00 Kg/Sqm and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 including dismantling of existing tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified. |
| 65 | Material and labour for coloured Glazed ceramic tiles in vertical surfaces of size 350mm x 250mm x 7mm/ 450x 350 x 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry @3.00 Kg/Sqm and pointed in white or coloured cement to match the tile including dismantling existing tiles with baking complete all as directed. |
| 66 | Material and labour for hardcore of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and directed. |
| 67 | Material and labour for 100 mm thick cement concrete 1:4:8 type D2 40mm graded stone aggregate all as specified and directed |
| 68 | Material and labour for coloured prepolished rubber moulded chequred cement concrete tile 30 cm x 30 cm x 20 to 22 mm thick with spacers 3mm set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 69 | Supply and fixing of mild steel work as in main and cross beam, hip and jack rafters, purlins,trusses etc. fixed with angle cleat or other connecting plate complete confirming to Fe-410W(Gde E-250) complete all as specified and as directed. |
| 70 | Materialand labour for two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed. |
| 71 | Supply and fixing of Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to walls/chajja covering etc fixed with self tapping screws complete all as specified and directed. |
| 72 | Supply and fix of aluminium anodised partition with frame, (fixed type) shutter, and glazing 4.8 mm thick plain glass, and 12mm thick prelaminated particle board interior grade in bottom panell, glass fixed with rubber gasket with aluminium glazing clips & snap beading including taking down unserviceable existing partion etc of following sizes;-Frame of vertical/horizontal section;- 44.5x44.5x1.22 mm thickBottuom section;-100x44.5x1.22 mm thickComplete all as specified and directed by the Engr in chargeMake: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. ii) Particle board: Green ply/Kit ply/ Century ply (iii) Glass: Saint gobain / Modi guard / Tata . Note- Work will be carried out up to 5th storey |
| 73 | Supply and fix of aluminium anodised door with frame and shutter, and glazing 5.0 mm thick plain glass and 12 mm thick prelaminated particle board exerior grade in bottom panel, rubber gasket, aluminium glazing clips, mortice lock, aluminium stopper cleat, iron mongary etc complete all as specified and directed. section of aluminium door shall be of following sizes: - Top;- 85x44.5x1.20 mm thick fixed with rawal plugwidth;- 85x44.5x1.20 mm thickBottom;- 100x44.5x1.20 mm thickStyle;- 85x44.5x1.20 mm thickGlazing beading;- 0.70 mm thickAluminium handle 'D' type ;- 150mmAluminium tower bold 9.9 mm dia shoot 200 mm longMortice lock stainless steel - 100 mm 4 lever Aluminium stopper cleataluminium hinges 100 mm long Note;- (i) Making good of wall surface with matching to existing surface complete all as specified ad directed(ii) PCC shall be measured and paid seperatelly Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Green ply/Kit ply/ Century ply (iii) Glass: Saint gobain / Modi guard / Tata Note- Work will be carried out up to 5th storey Please Enable Macros to View BoQ information |
| 74 | Supply and fix of aluminium anodised door with frame and shutter, and glazing 5.0 mm thick plain glass and 12 mm thick prelaminated particle board exerior grade in bottom panel, rubber gasket, aluminium glazing clips, mortice lock, aluminium stopper cleat, iron mongary etc complete all as specified and directed. section of aluminium door shall be of following sizes: - Top;- 85x44.5x1.20 mm thick fixed with rawal plugwidth;- 85x44.5x1.20 mm thickBottom;- 100x44.5x1.20 mm thickStyle;- 85x44.5x1.20 mm thickGlazing beading;- 0.70 mm thickAluminium handle 'D' type ;- 150mmAluminium tower bold 9.9 mm dia shoot 200 mm longMortice lock stainless steel - 100 mm 4 lever Aluminium stopper cleataluminium hinges 100 mm long Note;- (i) Making good of wall surface with matching to existing surface complete all as specified ad directed(ii) PCC shall be measured and paid seperatelly Make: (i) Anodised aluminum section : Jindal / Hindalko / Indalco. (ii) Particle board: Green ply/Kit ply/ Century ply (iii) Glass: Saint gobain / Modi guard / Tata Note- Work will be carried out up to 5th storey Please Enable Macros to View BoQ information |
