|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed. |
| 2 | M&L for rendering 15mm thick in cement mortar 1:3 mixed including water proofing compound as per manufacturer instructions surfaces finished even and smooth without using extra cement complete all as specified and directed .Note :- Water proofing compound shall be measured separately as supply only. |
| 3 | M&L for applying two coats of spray/brush applied of Smart Care Ultron Liquid membrane of Asian pant Ltd or equivalent as approved by GE in proportions as per manufacturer instruction complete on surfaces floor and wall of sunken portion complete all as specified and directed. |
| 4 | Demolition of cement concrete (unreinforced) above ground floors and paving exc 15 cm thickness below or above ground level complete all as specified and as directed. |
| 5 | M&L for plain cement concrete 1:5:10 type D-2 (using 40mm graded bricks bats) as in filling & mass concrete in floor and sunken portion complete all as specified and as directed by Engineer -in-charge. |
| 6 | M&L for PCC 1:2:4 type B0 12.5 mm stone aggregate of avg 25 mm thick make to slope in sunken floors all as directed. |
| 7 | M&L non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in colour cement to match as in floor including 15 thick cement mortar screed bed 1:4 complete all as specified and as directed |
| 8 | M&L non skid ceramic coloured tiles 7 to 8 mm thick ( square or rectangular ) area of each tile exc. 0.11 sqm but not exc 0.18 sqm over 10mm thick rendering in cement mortar 1:4 in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade |
| 9 | M&L glazed ceramic colour tiles 300mmx450mm x7mm /300mmx600mmx7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado including 10 mm thick rendering/screeding in cement mortar 1:4, complete all as specified and directed |
| 10 | Taking up or down existing steel tubing 15 mm bore and including connections etc complete all as specified and as directed. |
| 11 | Taking up or down existing steel tubing 20 mm bore and including connections etc complete and as directed. |
| 12 | Supply and fixing, jointing and testing galvanised iron tubing 15 mm bore medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor etc complete all as specified and directed. |
| 13 | Supply and fixing, jointing and testing galvanised iron tubing 20 mm bore medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor etc complete all as specified and directed. |
| 14 | Supplying and laying of 20mm CPVC pipes SDR 11 & CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 15 | S&F in repair 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed |
| 16 | S&F vitreous china squatting pan 'ORISSA PATTERN ' size 580mmx440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) with 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed |
| 17 | S and F in repair of Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) in repair including Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. |
| 18 | S and F in repair of Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed. |
| 19 | S&F in repair cast copper alloy chromium plated jet spray for EWC complete all as specified and as directed. |
| 20 | S&F in repair vitreous china wash hand basin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets, 32mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and as directed . |
| 21 | S&F in repair PVC connection 15mm dia and 450mm long with both ends brass fly nut complete all as specified and as directed (Make Prayag/Polytuf) |
| 22 | S&F in repair 15mm dia pillar taps cast copper alloy with capstan heads, cromium plated screwed down high pressure with or without lettered Hot or Cold with long screw shanks abd fly -nuts screwed for iron pipe and fixed |
| 23 | S&F in repair CP WHB mixer 15mm dia bore mixing hot & cold water for wash hand basin screwed down for iron pipe and fixed all as directed. |
| 24 | S&F in repair CP Wall mixer 15mm dia bore mixing hot & cold water screwed down for iron pipe and fixed all as directed. |
| 25 | S&F in repair CP Sink mixer 15mm dia bore mixing hot & cold water for screwed down for iron pipe and fixed all as directed. |
| 26 | S&F in repair 15 mm bore angle cock long thread fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete. |
| 27 | S&F in repair two way angle cock and bib tap with wall flange 15mm bore, fancy type, quarter turn, cast copper alloy, chromium plated with long shank and cup, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 28 | S&F in repair 15 mm bore stop cock long thread (concealed type) fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete. |
| 29 | S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union etc complete all as specified and as directed. |
| 30 | S&F in repair 15 mm bore bib taps long body chromium plated fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for unions and fixed 15 mm bore etc complete. |
| 31 | S&F in repair 600mm x450mm looking mirror 5mm thick of selected quality glass, mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass and cup washer complete all as directed |
| 32 | S&F in repair PVC bathroom cabinet with mirror of size 432mmx311mm complete all as specified and as directed. |
| 33 | S&F in repairs chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed by Engineer-in-Charge. |
| 34 | S&F in repair CP corner glass shelf with bracket fixed with screws complete all as specified and as directed by Engineer-in-Charge . |
| 35 | S&F in repair glass self (500mmX140mm) with ABS brackets (450X125X6) and fixed to wall with CP brass screws complete all as specified and as directed. |
| 36 | S&F in repair 18/19mm thick WPC board, prelaminated both face with decorative choice laminations one side and other side balancing white, fixed with screws to timber frame work including beading on cutting /exposed edges, polishing for cupboard shutter etc complete all as specified and as directed.Make : Rajshri /Black Cobra |
| 37 | S&F Continuous (piano) hinges, mild steel bright finish electrogalvanised 20mm width of flap etc complete. |
| 38 | S&F stainless steel handles 100mm size for kitchen cabinet shutters etc complete all as specified and as directed. |
| 39 | S&F in repair of magnetic catcher for cupboard and kitchen cabinets, complecte all as specified and as directed. |
| 40 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete all as specified and as directed. |
| 41 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but n. exc 4.0 Sqm each etc complete. |
| 42 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as directed and specified by Engineer-in-Charge. |
| 43 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete. |
| 44 | S&F but hinges extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed, type C-21 100 mm size in toilet with PVC doors etc complete. |
| 45 | S&F aluminium anodised barrel tower bolts of extruded section and fixed fixed 200 mm long etc complete. |
| 46 | S&F aluminum handles cast D type anodized 150 mm size etc complete all as specified and as directed. |
| 47 | Dismantling of PVC or AC drain pipe jointed in cement mortar of size 100mm/75mm bore complete all as specified and as directed. |
| 48 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with clamp out of 25x3mm flate Iron including bolts and nuts 110mm bore complete all as specified and directed. |
| 49 | S&F 75 in repairs mm dia PVC(SWR) type B pipes single socketed, in any length with rubber ring joints,fixed in Wall/laid in floor complete all as specified and as directed by engineer in charge . |
| 50 | S&F 110mm dia PVC(SWR)pipes bends any radious with acces door complete all as specified and as directed by engineer in charge . |
| 51 | S&F 75 mm dia PVC(SWR)pipes bends any radious.with acces door complete all as specified and as directed by engineer in charge . |
| 52 | S&F 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door complete all as specified and as directed by engineer in charge . |
| 53 | S&F 75mm dia PVC(SWR) vent cowl complete all as specified and as directed by engineer in charge . |
| 54 | M & L 75 mm dia of outlet PVC (SWR) floor trap plain with cp grating incl. jointing with solvent cement as in repair complete all as specified and as directed by engineer in charge . |
| 55 | S&F in repair 25 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms etc complete. |
| 56 | Disconnecting existing water tanks, setting aside (or lowering if required) for repairs, cleaning etc and reconnecting and refixing in position capacity of tank exc 250 and n.exc 500 ltr. (cleaning, repairing etc measured separately) |
| 57 | Disconnecting existing water tanks, setting aside (or lowering if required) for repairs, cleaning etc and reconnecting and refixing in position capacity of tank exc 500 and n.exc 1000 ltr. (cleaning, repairing etc measured separately) |
| 58 | Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc capacity of tank exc 250 ltrs but n.exc 500 Ltrs complete all as specified and as directed. |
| 59 | Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc capacity of tank exc 500 ltrs but n.exc 1000 Ltrs complete all as specified and as directed. |
| 60 | Removing existing water proofing treatment by brushing with wire brush, cleaning of terracing by taking down cement concrete, existing plaster lime coba 80 to 100mm thick mud phuska/cement concrete/lime coba etc, cleaning of all foreign material such as fungus mass dust etc, roughing surface of corner to roof by wire brush complete all as specified and directed. |
| 61 | M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed. |
| 62 | M&L 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is still green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately as supply only |
| 63 | Supply only integral water proofing compound complete all as specified and as directed. |
| 64 | M&L applying water proofing treatment with the following-(a) First coat of bitumen primer conforming to IS-3384 @ 0.3Kg / sqm to be applied on prepared surface till the surface is properly impregnated.(b) after the application of approved bituminous primer the water proofing memberne minimum weight 3kg/sqm and minimum 3mm thick reinforced with polyesterd non woven fabric (weight not less then 150gms/sqm) shall be laid on the primed surface by torch application method as per manufactured instruction.(c) All joints and change in direction should be curved with cement mortar (1:3) mixed with SBR latex @ 200ml per bag on cement and cured well before laying of membrane. |
| 65 | M and L for preparation of newly surface of APP membrane and Apply two coat of bituminous aluminum paint @ 200 gm / Sqm complet all as specified and as directed. |
| 66 | M and l for repairing of RCC projection, chajja, facia, column etc by necessary preparation (i.e. scraping, cutting, chiseling, dusting and cleaning exposed reinforcement surface of damaged/ loose surface and applying one coat of cement slurry and filling the surface with plain cement concrete (1:1.5:3) reinforced with welded mesh and make good by15mm thick plaster with cm (1:4) and including scaffolding/formwork etc upto double storey height complete all as specified and directed by engineer in charge. |
| 67 | Demolition of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete. |
| 68 | M&L Brick work with old size subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed. |
| 69 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down wih water, etc complete all as specified and as directed |
| 70 | M&L for 10 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 71 | M&L rendering 5mm thick in cement mortar 1:4 on ceiling surface and finished even and smooth with out using extra cement |
| 72 | M & L for preparing of new surface and applying two coat of cement base paint over a coat of alkali resistant priming paint on external surface complete all as specified and as directed. |
| 73 | M & L for preparing of new surface and applying two coat of oil emulsion distemper over a coat of alkali resistant priming paint on internal surface complete all as specified and as directed. |
| 74 | M & L for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified and as directed. |
| 75 | M & L preparing surfaces of wall by complete removal of existing treament and applying two coat of oil emulsion distemper on walls complete all as specified and as directed. |
| 76 | M&L for a coat of JK/Birla wall care putty 1mm thick including preparation of surface complete all as specified and as directed. |
| 77 | Taking down old existing unserviceable HDPE water storage tank(PVC/RCC and of capacity n exc 500 ltrs etc complete as directed |
| 78 | Taking down old existing unserviceable HDPE water storage tank (PVC/RCC) and of capacity exc 500 ltrs but n exc 1000 ltrs complete as directed |
| 79 | S&F 500 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) WHITE , ISI marked , Triple layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etc complete all as specified in SSR Part -I 2009 complete all as specified and as directed. |
| 80 | S&F 1000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) WHITE , ISI marked , Triple layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etc complete all as specified in SSR Part -I 2009 complete all as specified and as directed. |
| 81 | S&F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed 20mm dia of pipe . (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 82 | S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 83 | S & F in repair 25mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
